[MacPorts] #36801: Error in Installing: py24-pyqt4
#36801: Error in Installing: py24-pyqt4 -----------------------------+-------------------------------- Reporter: berg.michael1@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: py24-pyqt4 -----------------------------+-------------------------------- Hi! I am trying to compile FreeCAD from source on a PowerPC Mac running OS 10.5.8. For this, you must install, py-pyqt4; one of its dependencies being py24-pyqt4. {{{ ---> Fetching archive for py24-pyqt4 ---> Attempting to fetch py24-pyqt4-4.9.4_0.darwin_9.ppc.tbz2 from http://packages.macports.org/py24-pyqt4 ---> Attempting to fetch py24-pyqt4-4.9.4_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/py24-pyqt4 ---> Attempting to fetch py24-pyqt4-4.9.4_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/py24-pyqt4 ---> Fetching distfiles for py24-pyqt4 ---> Attempting to fetch PyQt-mac-gpl-4.9.4.tar.gz from http://pyqwt.sourceforge.net/support/ ---> Attempting to fetch PyQt-mac-gpl-4.9.4.tar.gz from http://www.riverbankcomputing.com/static/Downloads/PyQt4/ ---> Attempting to fetch PyQt-mac-gpl-4.9.4.tar.gz from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/python ---> Verifying checksum(s) for py24-pyqt4 ---> Extracting py24-pyqt4 ---> Applying patches to py24-pyqt4 ---> Configuring py24-pyqt4 ---> Building py24-pyqt4 Error: org.macports.build for port py24-pyqt4 returned: command execution failed Error: Failed to install py24-pyqt4 Please see the log file for port py24-pyqt4 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_python_py-pyqt4/py24-pyqt4/main.log Error: The following dependencies were not installed: py24-pyqt4 To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port py-pyqt4 failed michael-bergs-power-mac-g5:~ michaelbergg5$ sudo port install py24-py Password: Error: Port py24-py not found michael-bergs-power-mac-g5:~ michaelbergg5$ sudo port install py24-pyqt4 ---> Computing dependencies for py24-pyqt4 ---> Building py24-pyqt4 Error: org.macports.build for port py24-pyqt4 returned: command execution failed Please see the log file for port py24-pyqt4 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_python_py-pyqt4/py24-pyqt4/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port py24-pyqt4 failed }}} as you can see, when it first failed, I retried installing, again unsuccessfully. I am inexperienced using MacPorts, and am not able to discern anything from the error. I couldn't find any related bugs, so hopefully this will have a solution -- Ticket URL: <https://trac.macports.org/ticket/36801> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Changes (by ryandesign@…): * owner: macports-tickets@… => michaelld@… Comment: The log you attached is not from a clean build attempt. Please "sudo port clean py24-pyqt4", then try again, then attach the new log. Also, python 2.4 is very old. Consider using a newer version of python, like 2.7, by using the py27-pyqt4 port instead. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): I'll do that when I get home. However, py24-pyqt4 is installed as a dependency for the package py-pyqt4. Will everything go as planned if I use py27-pyqt4 instead? -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Changes (by macsforever2000@…): * cc: berg.michael1@… (removed) Comment: py24-pyqt4 is not really a dependency of py-pyqt4. It is a sub-port. You cannot actually install py-pyqt4. Instead it is a wrapper for any supported version of python with pyqt4. By default it chooses py24 (python 2.4.x) right now, but that's really for legacy reasons. You should choose which version of python you want. py27-pyqt4 - the python 2.7.x version - is probably the best choice currently. py24-pyqt4 is scheduled to be removed. Note that you do not need to Cc yourself as the ticket reporter. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): So I have (finally) tried to install py27-pyqt4, but it pulls up the same error as py24-pyqt4 did. I have attached another log file (py27-pyqt4.log). Everything proceeds normally, including getting the version of py27-pyqt4 for PowerPC, until it begins building py27-pyqt4. {{{ ---> Computing dependencies for py27-pyqt4 ---> Fetching archive for py27-pyqt4 ---> Attempting to fetch py27-pyqt4-4.9.4_0.darwin_9.ppc.tbz2 from http://packages.macports.org/py27-pyqt4 ---> Attempting to fetch py27-pyqt4-4.9.4_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/py27-pyqt4 ---> Attempting to fetch py27-pyqt4-4.9.4_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/py27-pyqt4 ---> Fetching distfiles for py27-pyqt4 ---> Verifying checksum(s) for py27-pyqt4 ---> Extracting py27-pyqt4 ---> Applying patches to py27-pyqt4 ---> Configuring py27-pyqt4 ---> Building py27-pyqt4 Error: org.macports.build for port py27-pyqt4 returned: command execution failed Please see the log file for port py27-pyqt4 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port py27-pyqt4 failed }}} -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): Can you also attach the file "`port dir py27-pyqt4`/work/PyQt-mac- gpl-4.9.4/QtGui/sipQtGuiQList0100QGlyphRun.cpp"? I'm guessing PyQt4 and/or SIP aren't playing nice with the older OS and/or the PPC. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): Replying to [comment:6 michaelld@…]:
Can you also attach the file "`port dir py27-pyqt4`/work/PyQt-mac- gpl-4.9.4/QtGui/sipQtGuiQList0100QGlyphRun.cpp"? I'm guessing PyQt4 and/or SIP aren't playing nice with the older OS and/or the PPC.
File has been attached. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): Thanks. That file contains "Generated by SIP 4.13.3". Did py27-sip 4.14.1 not get installed or activated somehow? What does "port installed | grep sip" return? -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:8> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): port installed brings {{{ michael-bergs-power-mac-g5-2:~ michaelbergg5$ port installed The following ports are currently installed: autoconf @2.69_0 (active) automake @1.12.4_0 (active) boost @1.51.0_1+no_single+no_static (active) bzip2 @1.0.6_0 (active) cmake @2.8.9_1 (active) db46 @4.6.21_7 (active) dbus @1.4.20_1+startupitem (active) eigen3 @3.1.1_2+cmake (active) expat @2.1.0_0 (active) f2c @20110816_0 (active) freetype @2.4.10_0 (active) ftgl @2.1.3-rc5_0 (active) gdbm @1.10_2 (active) gettext @0.18.1.1_2 (active) gperf @3.0.4_2 (active) gsed @4.2.1_2 (active) help2man @1.40.10_0 (active) icu @49.1.2_0 (active) jpeg @8d_0 (active) lcms @1.19_2 (active) libedit @20120601-3.0_0 (active) libf2c @20110801_0 (active) libiconv @1.14_0 (active) libidn @1.25_0 (active) libmng @1.0.10_2 (active) libpng @1.5.13_0 (active) libtool @2.4.2_3 (active) m4 @1.4.16_0 (active) ncurses @5.9_1 (active) openssl @1.0.1c_0 (active) p5.12-locale-gettext @1.50.0_7 (active) perl5 @5.12.4_0+perl5_12 (active) perl5.12 @5.12.4_1 (active) pkgconfig @0.27.1_1 (active) py-sip @4.13.3_0 (active) py24-sip @4.13.3_0 (active) py27-sip @4.13.3_0 (active) python24 @2.4.6_10 (active) python27 @2.7.3_1 (active) python_select @0.3_1 (active) qt4-mac @4.8.3_1+quartz (active) sqlite3 @3.7.14.1_0 (active) tiff @3.9.5_0 (active) xercesc @2.8.0_2 (active) xz @5.0.4_0 (active) zlib @1.2.7_0 (active) }}} What do you want me to do with "grep sip". Thanks! -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): Your install of py27-sip is not compatible with the version of py27-pyqt4 that you're trying to install (too old). I would recommend the following: {{{ sudo port clean py27-pyqt4 sudo port selfupdate sudo port upgrade py27-sip sudo port install py27-pyqt4 }}} and, if that works then you can also do: {{{ sudo port upgrade outdated }}} to upgrade all older ports. Post back how the above goes. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:10> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): Everything was going well, but I had the same issue as usual. {{{ michael-bergs-power-mac-g5-2:~ michaelbergg5$ sudo port clean py27-pyqt4 Warning: port definitions are more than two weeks old, consider using selfupdate ---> Cleaning py27-pyqt4 michael-bergs-power-mac-g5-2:~ michaelbergg5$ sudo port selfupdate ---> Updating MacPorts base sources using rsync MacPorts base version 2.1.2 installed, MacPorts base version 2.1.2 downloaded. ---> Updating the ports tree ---> MacPorts base is already the latest version The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated michael-bergs-power-mac-g5-2:~ michaelbergg5$ sudo port upgrade py27-sip ---> Computing dependencies for py27-sip ---> Fetching archive for py27-sip ---> Attempting to fetch py27-sip-4.14.1_0.darwin_9.ppc.tbz2 from http://packages.macports.org/py27-sip ---> Attempting to fetch py27-sip-4.14.1_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/py27-sip ---> Attempting to fetch py27-sip-4.14.1_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/py27-sip ---> Fetching distfiles for py27-sip ---> Attempting to fetch sip-4.14.1.tar.gz from http://gentoo.osuosl.org/distfiles/ ---> Verifying checksum(s) for py27-sip ---> Extracting py27-sip ---> Applying patches to py27-sip ---> Configuring py27-sip ---> Building py27-sip ---> Staging py27-sip into destroot ---> Installing py27-sip @4.14.1_0 ---> Cleaning py27-sip ---> Computing dependencies for py27-sip ---> Deactivating py27-sip @4.13.3_0 ---> Cleaning py27-sip ---> Activating py27-sip @4.14.1_0 py27-sip is available under a PSF license with one addition: 4. Licensee may not use SIP to generate Python bindings for any C or C++ library for which bindings are already provided by Riverbank. GPL-2 or GPL-3 licenses are also available. For details see /opt/local/share/doc/py27-sip/LICENSE [-GPL2 -GPL3] ---> Cleaning py27-sip ---> Updating database of binaries: 100.0% ---> Scanning binaries for linking errors: 100.0% ---> No broken files found. michael-bergs-power-mac-g5-2:~ michaelbergg5$ sudo port install py27-pyqt4 ---> Computing dependencies for py27-pyqt4 ---> Fetching archive for py27-pyqt4 ---> Attempting to fetch py27-pyqt4-4.9.5_0.darwin_9.ppc.tbz2 from http://packages.macports.org/py27-pyqt4 ---> Attempting to fetch py27-pyqt4-4.9.5_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/py27-pyqt4 ---> Attempting to fetch py27-pyqt4-4.9.5_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/py27-pyqt4 ---> Fetching distfiles for py27-pyqt4 ---> Attempting to fetch PyQt-mac-gpl-4.9.5.tar.gz from http://superb- dca2.dl.sourceforge.net/pyqt ---> Verifying checksum(s) for py27-pyqt4 ---> Extracting py27-pyqt4 ---> Applying patches to py27-pyqt4 ---> Configuring py27-pyqt4 ---> Building py27-pyqt4 Error: org.macports.build for port py27-pyqt4 returned: command execution failed Please see the log file for port py27-pyqt4 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port py27-pyqt4 failed michael-bergs-power-mac-g5-2:~ michaelbergg5$ }}} -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:11> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): Yup; same issue. Can you also attach the output of "port installed | grep sip" and also the file "sipQtGuiQList0100QGlyphRun.cpp" as found before? -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:12> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): I think I am doing something wrong here... {{{ michael-bergs-power-mac-g5-2:~ michaelbergg5$ port installed | grep Usage: grep [OPTION]... PATTERN [FILE]... Try `grep --help' for more information. michael-bergs-power-mac-g5-2:~ michaelbergg5$ sip }}} -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:13> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): Do it as a single command: {{{ port installed | grep sip }}} That way, you get just those installed ports (active or not) with the 'word' "sip" in them, instead of all installed ports. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:14> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): The newer file was created by "SIP 4.14.1", which is good. Now, I wonder what the issue really is ... -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:15> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): I don't know how that "sip" didn't make it into the terminal... Well, here it is {{{ michael-bergs-power-mac-g5-2:~ michaelbergg5$ port installed | grep sip py-sip @4.13.3_0 (active) py24-sip @4.13.3_0 (active) py27-sip @4.13.3_0 py27-sip @4.14.1_0 (active) }}} -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:16> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): This turns out to have been an issue with PyQt4, that they hopefully fixed in last night's snapshot (accord to http://www.mail- archive.com/pyqt@riverbankcomputing.com/msg26483.html ). I'll look into that commit and see if I can come up with a patch. I think this ticket is probably a duplicate of ticket #36479, but I'll keep them both open for now. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:17> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): Replying to [comment:17 michaelld@…]:
This turns out to have been an issue with PyQt4, that they hopefully fixed in last night's snapshot (accord to http://www.mail- archive.com/pyqt@riverbankcomputing.com/msg26483.html ). I'll look into that commit and see if I can come up with a patch.
I think this ticket is probably a duplicate of ticket #36479, but I'll keep them both open for now. Thanks for all of the help you have and are putting into this!
-- Ticket URL: <https://trac.macports.org/ticket/36801#comment:18> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by berg.michael1@…): Should I retry building or wait for your patch? -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:19> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): Can't hurt to try rebuilding. I haven't had time to work on the patch just yet. Maybe later this coming week. Maybe they'll release an updated PyQt4 soon, since this a real issue for some Mac folks. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:20> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): PyQt4 4.9.6 just came out, so I'm updating to that & hopefully it'll fix this issue. I'll post back here once I've done that check-in, hopefully tonight, which unfortunately will require upgrading qt4-mac as well. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:21> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by michaelld@…): This ticket's issue should be addressed in r100394, which upgrades py- pyqt4 to 4.9.6 (and thus includes their patches). I'm leaving this ticket open for now, waiting your feedback. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:22> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Comment (by ryandesign@…): Any feedback? -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:23> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36801: Error in Installing: py24-pyqt4 ------------------------------+------------------------- Reporter: berg.michael1@… | Owner: michaelld@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: fixed | Keywords: Port: py24-pyqt4 | ------------------------------+------------------------- Changes (by michaelld@…): * status: new => closed * resolution: => fixed Comment: Nope. Closing. -- Ticket URL: <https://trac.macports.org/ticket/36801#comment:24> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts