[MacPorts] #38762: octave @3.2.4, Revision 11 (math, science) Error: Failed to install poppler
#38762: octave @3.2.4, Revision 11 (math, science) Error: Failed to install poppler -----------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: octave -----------------------------------+-------------------------------- Trying to install octave by following the wiki instructions: sudo port install octave-devel +atlas+docs had errors so after querying the forum, found recommendations to install dependencies first: sudo port clean octave sudo port install {dependencies listed from the log...} then ran into this error that cannot find a solution: Error: org.macports.configure for port poppler returned: configure failure: command execution failed Error: Failed to install poppler Please see the log file for port poppler for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log Error: The following dependencies were not installed: texlive-basic texlive-bin poppler xorg-libXp texlive-documentation-base texlive-bin- extra dvipng latexmk texlive-latex pdfjam texlive-latex-recommended pgf texlive-context texlive-fonts-recommended texlive-math-extra texlive- metapost texlive-xetex texlive-generic-recommended texlive-documentation- english texlive-fontutils lcdf-typetools ps2eps texlive-lang-czechslovak texlive-lang-dutch texlive-lang-english texlive-lang-french texlive-lang- german texlive-lang-italian texlive-lang-polish texlive-lang-portuguese texlive-lang-spanish texlive-luatex To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port texlive failed attach is the log. Using Mac OSX 10.6.8 with XCode 3.2.6 -- Ticket URL: <https://trac.macports.org/ticket/38762> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: octave @3.2.4, Revision 11 (math, science) Error: Failed to install poppler ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Comment (by egall@…): This is actually an issue with poppler, not octave. The relevant part of the log is: {{{ :info:configure checking for LIBCURL... no :info:configure configure: error: in `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.22.2': :info:configure configure: error: The pkg-config script could not be found or is too old. Make sure it :info:configure is in your PATH or set the PKG_CONFIG environment variable to the full :info:configure path to pkg-config. :info:configure :info:configure Alternatively, you may set the environment variables LIBCURL_CFLAGS :info:configure and LIBCURL_LIBS to avoid the need to call pkg-config. :info:configure See the pkg-config man page for more details. :info:configure :info:configure To get pkg-config, see <http://pkg- config.freedesktop.org/>. :info:configure See `config.log' for more details :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.22.2" && ./configure --prefix=/opt/local --disable-introspection --disable- poppler-qt4 --disable-gtk-test --disable-silent-rules --enable-xpdf- headers --enable-zlib --enable-libcurl --enable-poppler-glib --mandir=/opt/local/share/man --x-includes=/opt/local/include --x-libraries=/opt/local/lib }}} What does `port installed curl` return for you? How about `port installed pkgconfig`? -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:1> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: octave @3.2.4, Revision 11 (math, science) Error: Failed to install poppler ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Comment (by precioso.p.gabrillo@…): Replying to [comment:1 egall@…]:
What does `port installed curl` return for you? How about `port installed pkgconfig`?
Hi, This is the info: The following ports are currently installed: curl @7.29.0_1+ssl (active) The following ports are currently installed: pkgconfig @0.28_0 (active) thanks. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:2> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Old description:
Trying to install octave by following the wiki instructions: sudo port install octave-devel +atlas+docs had errors so after querying the forum, found recommendations to install dependencies first: sudo port clean octave sudo port install {dependencies listed from the log...} then ran into this error that cannot find a solution:
Error: org.macports.configure for port poppler returned: configure failure: command execution failed Error: Failed to install poppler Please see the log file for port poppler for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log Error: The following dependencies were not installed: texlive-basic texlive-bin poppler xorg-libXp texlive-documentation-base texlive-bin- extra dvipng latexmk texlive-latex pdfjam texlive-latex-recommended pgf texlive-context texlive-fonts-recommended texlive-math-extra texlive- metapost texlive-xetex texlive-generic-recommended texlive-documentation- english texlive-fontutils lcdf-typetools ps2eps texlive-lang-czechslovak texlive-lang-dutch texlive-lang-english texlive-lang-french texlive-lang- german texlive-lang-italian texlive-lang-polish texlive-lang-portuguese texlive-lang-spanish texlive-luatex To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port texlive failed
attach is the log. Using Mac OSX 10.6.8 with XCode 3.2.6
New description: Trying to install octave by following the wiki instructions: {{{ sudo port install octave-devel +atlas+docs }}} had errors so after querying the forum, found recommendations to install dependencies first: {{{ sudo port clean octave sudo port install {dependencies listed from the log...} }}} then ran into this error that cannot find a solution: {{{ Error: org.macports.configure for port poppler returned: configure failure: command execution failed Error: Failed to install poppler Please see the log file for port poppler for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log Error: The following dependencies were not installed: texlive-basic texlive-bin poppler xorg-libXp texlive-documentation-base texlive-bin- extra dvipng latexmk texlive-latex pdfjam texlive-latex-recommended pgf texlive-context texlive-fonts-recommended texlive-math-extra texlive- metapost texlive-xetex texlive-generic-recommended texlive-documentation- english texlive-fontutils lcdf-typetools ps2eps texlive-lang-czechslovak texlive-lang-dutch texlive-lang-english texlive-lang-french texlive-lang- german texlive-lang-italian texlive-lang-polish texlive-lang-portuguese texlive-lang-spanish texlive-luatex To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port texlive failed }}} attach is the log. Using Mac OSX 10.6.8 with XCode 3.2.6 -- Comment (by ryandesign@…): Please use WikiFormatting. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:3> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Comment (by ryandesign@…): So what happens when you try to run the `pkg-config` program yourself? Try: {{{ pkg-config --version }}} -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:4> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Comment (by precioso.p.gabrillo@…): Replying to [comment:4 ryandesign@…]:
So what happens when you try to run the `pkg-config` program yourself? Try: {{{ pkg-config --version }}}
This is what I got: {{{ -sh: pkg-config: command not found }}} -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:5> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Changes (by ryandesign@…): * cc: ryandesign@… (added) Comment: What about: {{{ port contents pkgconfig }}} -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:6> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Comment (by precioso.p.gabrillo@…): Replying to [comment:6 ryandesign@…]:
What about: {{{ port contents pkgconfig }}}
The details: {{{ Port pkgconfig contains: /opt/local/bin/pkg-config /opt/local/lib/pkgconfig/.turd_pkgconfig /opt/local/share/aclocal/pkg.m4 /opt/local/share/doc/pkgconfig/AUTHORS /opt/local/share/doc/pkgconfig/COPYING /opt/local/share/doc/pkgconfig/NEWS /opt/local/share/doc/pkgconfig/README /opt/local/share/doc/pkgconfig/pkg-config-guide.html /opt/local/share/man/man1/pkg-config.1.gz /opt/local/share/pkgconfig/.turd_pkgconfig }}} -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:7> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Comment (by ryandesign@…): So MacPorts says `pkg-config` should be there, but it seems not to be. Presumably some outside force deleted it without MacPorts' knowledge. That's disconcerting but let's see if we can get it back with: {{{ sudo port -f deactivate pkgconfig sudo port activate pkgconfig }}} -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:8> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Comment (by egall@…): Replying to [comment:8 ryandesign@…]:
So MacPorts says `pkg-config` should be there, but it seems not to be. Presumably some outside force deleted it without MacPorts' knowledge.
Either that or somehow `/opt/local/bin` got removed from OP's `$PATH`. OP, could you post the results of the following commands please? - `echo $PATH` (using "`env`" would also work for this) - `stat /opt/local/bin/pkg-config` - `which -a pkg-config` (Although based on your response in comment:5 I don't expect this one to actually return anything...) -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:9> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: octave | ------------------------------------+-------------------------------- Comment (by ryandesign@…): The value of `$PATH` on the command line is irrelevant; MacPorts does not use it; instead, MacPorts uses `binpath` as set in macports.conf. Certainly, removing /opt/local/bin from `binpath` would be a user error, and as it says in macports.conf, "Customizing binpath is unsupported and is intended for advanced users only", so let's assume the user didn't do that. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:11> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Changes (by jmr@…): * cc: devans@… (added) * port: octave => poppler pkgconfig -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:12> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by precioso.p.gabrillo@…): Got as far as octave install but ran into another problem. This is what I did: {{{ sudo port -f deactivate pkgconfig Password: ---> Deactivating pkgconfig @0.28_0 ---> Cleaning pkgconfig sudo port activate pkgconfig ---> Computing dependencies for pkgconfig ---> Activating pkgconfig @0.28_0 ---> Cleaning pkgconfig }}} then: {{{ echo $PATH /opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/X11/bin:/usr/local/git/bin:/usr/X11/bin stat /opt/local/bin/pkg-config stat: /opt/local/bin/pkg-config: stat: No such file or directory which -a pkg-config <---- returned prompt, no return }}} I then type the following: {{{ sudo port selfupdate sudo port clean octave sudo port clean <the list of dependencies I tried to install firts> sudo port install <those same list of dependencies> }}} It seems activating pckconfig may have done the trick as it ran past poppler. However, a lot of warnings were listed at the end but the final statement showed: {{{ ---> Updating database of binaries: 100.0% ---> Scanning binaries for linking errors: 100.0% ---> No broken files found. }}} I then use the installation instruction from the wiki: sudo port install octave-devel +atlas+docs and got this last part of the error: {{{ Error: org.macports.build for port metis returned: command execution failed Please see the log file for port metis for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_metis/metis/main.log Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade metis failed }}} I will try to attach 2 files: from the screen dump at the end of the dependency installation and the metis main.log. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:13> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by precioso.p.gabrillo@…): Attachment added. The file warnings.rtf is a rich text format of a screen dump after installing the dependencies. Main.2.log is from the metis error log. thanks. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:14> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by egall@…): Replying to [comment:11 ryandesign@…]:
The value of `$PATH` on the command line is irrelevant; MacPorts does not use it; instead, MacPorts uses `binpath` as set in macports.conf. Certainly, removing /opt/local/bin from `binpath` would be a user error, and as it says in macports.conf, "Customizing binpath is unsupported and is intended for advanced users only", so let's assume the user didn't do that.
I was referring to when the user tried running `pkg-config` manually in comment:5 above. I'm assuming that command was run as the user's regular account, and not as the `macports` user. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:15> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by egall@…): Replying to [comment:14 precioso.p.gabrillo@…]:
Attachment added.
The file warnings.rtf is a rich text format of a screen dump after installing the dependencies. Main.2.log is from the metis error log.
thanks.
This looks like a different error, I'd recommend opening a separate ticket for that. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:16> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by precioso.p.gabrillo@…): Replying to [comment:15 egall@…]:
Replying to [comment:11 ryandesign@…]:
The value of `$PATH` on the command line is irrelevant; MacPorts does not use it; instead, MacPorts uses `binpath` as set in macports.conf. Certainly, removing /opt/local/bin from `binpath` would be a user error, and as it says in macports.conf, "Customizing binpath is unsupported and is intended for advanced users only", so let's assume the user didn't do that.
I was referring to when the user tried running `pkg-config` manually in comment:5 above. I'm assuming that command was run as the user's regular account, and not as the `macports` user.
I tried doing this: {{{ port pkg-config --version Error: Unrecognized action "port pkg-config" }}} -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:17> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by precioso.p.gabrillo@…): Replying to [comment:16 egall@…]:
Replying to [comment:14 precioso.p.gabrillo@…]:
Attachment added.
The file warnings.rtf is a rich text format of a screen dump after installing the dependencies. Main.2.log is from the metis error log.
thanks.
This looks like a different error, I'd recommend opening a separate ticket for that.
Ticket created. Thanks. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:18> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by egall@…): Replying to [comment:18 precioso.p.gabrillo@…]:
Replying to [comment:16 egall@…]:
This looks like a different error, I'd recommend opening a separate ticket for that.
Ticket created. Thanks.
(This is #38775, for other's reference) -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:19> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by ryandesign@…): I asked you to deactivate and re-activate the pkgconfig port to see if that would bring the `pkg-config` program back. You showed that you deactivated and re-activated the pkgconfig port, and then showed the output of `stat` and `which` commands which showed that the `pkg-config` program still did not exist. Does the `pkg-config` program exist now? Please look in /opt/local/bin. If it does not exist, then we need to fix that before trying anything else, and if deactivating and re-activating did not work, then the next thing to try is rebuilding the port with: {{{ sudo port clean pkgconfig sudo port -n upgrade --force pkgconfig }}} -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:20> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Comment (by precioso.p.gabrillo@…): Replying to [comment:20 ryandesign@…]:
I asked you to deactivate and re-activate the pkgconfig port to see if that would bring the `pkg-config` program back. You showed that you deactivated and re-activated the pkgconfig port, and then showed the output of `stat` and `which` commands which showed that the `pkg-config` program still did not exist.
Does the `pkg-config` program exist now? Please look in /opt/local/bin. If it does not exist, then we need to fix that before trying anything else, and if deactivating and re-activating did not work, then the next thing to try is rebuilding the port with:
{{{ sudo port clean pkgconfig sudo port -n upgrade --force pkgconfig }}}
This is what I have: {{{ /opt/local/bin -rwxr-xr-x 1 root admin 597864 Apr 7 16:19 pkg-config pkg-config: Mach-O 64-bit executable x86_64 }}} I do not have pkgconfig, just pkg-config. Are they different? Have not tried the last 2 commands since pkg-config exists, I think. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:21> MacPorts <http://www.macports.org/> Ports system for OS X
#38762: poppler: error: The pkg-config script could not be found or is too old. ------------------------------------+-------------------------------- Reporter: precioso.p.gabrillo@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: invalid | Keywords: Port: poppler pkgconfig | ------------------------------------+-------------------------------- Changes (by ryandesign@…): * status: new => closed * resolution: => invalid Comment: pkgconfig is the name of the port. `pkg-config` is the name of the program installed by that port. Ok, so if the `pkg-config` program now exists, then all is well. There's still the mystery about why the program disappeared, and if you can't explain it, then it's possible that whatever deleted the pkg-config program also deleted parts of other ports, and as you discover such problems, you could deactivate and reactivate those ports as well to fix it. -- Ticket URL: <https://trac.macports.org/ticket/38762#comment:22> MacPorts <http://www.macports.org/> Ports system for OS X
participants (1)
-
MacPorts