[MacPorts] #27007: kdenlive fails to build because of dependency failure
#27007: kdenlive fails to build because of dependency failure -----------------------------------------------------+---------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: Status 1 encountered during processing. | Port: kdenlive -----------------------------------------------------+---------------------- This is actually related to Ticket #26988. I apologize if I was unclear in the description. The failure is because kdebase4-runtime fails due to kdelibs4. In addition, qimageblitz fails. Both failures report shell command failed. Log files are attached. BTW, attica worked after the fix. If kdebase4-runtime, kdelibs4, and qimageblitz can be fixed, I just may finally get a fully working install of kdenlive on my Mac OS X 10.5.8, which (as mentioned in Ticket # 26988) is a completely fresh install. -- Ticket URL: <https://trac.macports.org/ticket/27007> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -----------------------------------------------------+---------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: Status 1 encountered during processing. | Port: kdenlive -----------------------------------------------------+---------------------- Comment(by mark6691@…): This time I hope I've provided all the necessary information. I might mention that there were a host of other dependencies that did not get installed because of the failure of kdebase4-runtime, but I got them one by one until I hit this final stopping point which I feel is because of kdelibs4 and qimageblitz. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -----------------------------------------------------+---------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: Status 1 encountered during processing. | Port: kdenlive -----------------------------------------------------+---------------------- Comment(by mark6691@…): Oh, and I've taken care of the firewall issues at work, so I'll be monitoring all day to check for ticket updates, or any questions. Thank you for all you do; I am really looking forward to finally getting this to work. When the new version of kdenlive is released, please mention any caveats that I'll need to observe. Thanks, again. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: worksforme | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Changes (by snc@…): * keywords: Status 1 encountered during processing. => * status: new => closed * resolution: => worksforme Comment: Please do selfupdate and try again: your builds are for outdated versions. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Changes (by mark6691@…): * status: closed => reopened * resolution: worksforme => Comment: Replying to [comment:3 snc@…]:
Please do selfupdate and try again: your builds are for outdated versions.
Done, fails again adding more dependencies. In addition to kdebase4-runtime, kdelibs4, qimageblitz, there is now dbusmenu-qt, qjson, and openslp. Do I need to quit trying to use subversion, blow it all away and use the Mac package? Or use the source install? There has to be a way to make this thing work. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): Just got the last 3: dbusmenu-qt, qjoson, and openslp. Remaining are kdebase4-runtime, kdelibs4, and qimageblitz. The problem is kdelibs4 attempting to fetch add-bundles-to-patch.patch, assuming that is still a work in progress. Will keep trying to "clean" and "selfupdate" and "install" kdelibs4. Still getting "shell command failed" with qimageblitz. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by snc@…): Sigh. I clobbered my diffs. Now to figure out if the patches were needed or not. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): Replying to [comment:6 snc@…]:
Sigh. I clobbered my diffs. Now to figure out if the patches were needed or not.
Boy, I wish I knew how to do what you guys do. I'd love to be able to contribute in some way. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by snc@…): The patch files do indeed work, so they need checked in again (can we do a merge revert?). Checking... in the mean time follow #27017 for the patchfile issue. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:8> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): Replying to [comment:8 snc@…]:
The patch files do indeed work, so they need checked in again (can we do a merge revert?). Checking... in the mean time follow #27017 for the patchfile issue.
Getting there, one step at a time. Kdelibs4 worked, now installed. Now if qimageblitz will pass the "shell command failed" error, kdebase4-runtime will likely install which should allow kdenlive to complete installation. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): Replying to [comment:9 mark6691@…]:
Replying to [comment:8 snc@…]:
The patch files do indeed work, so they need checked in again (can we do a merge revert?). Checking... in the mean time follow #27017 for the patchfile issue.
Getting there, one step at a time. Kdelibs4 worked, now installed. Now if qimageblitz will pass the "shell command failed" error, kdebase4-runtime will likely install which should allow kdenlive to complete installation.
How does one do a merge revert? Tried to Google it, but it wasn't making a whole lot of sense. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:10> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by snc@…): I mean "revert changes by merging" svn merge -r head:### I basically "undo" from now back to a good point, and then check that in. It preserves the history then rather than wiping it out if I added the files again. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:11> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): Replying to [comment:11 snc@…]:
I mean "revert changes by merging"
svn merge -r head:###
I basically "undo" from now back to a good point, and then check that in. It preserves the history then rather than wiping it out if I added the files again.
I think my problem would be that I don't have a prior known good point, since this is being done on a completely new installation of Mac OS X. Also, I'm unfamiliar with the term "head" and how to determine the number. Biggest problem is not knowing the language, I guess. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:12> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by snc@…): Replying to [comment:12 mark6691@…]: It's quite alright. HEAD and PREV are defined, as the current and previous revisions. I took care of reverting it, and thus the ticket for it was closed (trac puts a strikethrough on the ticket reference). -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:13> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): I've tried again with cleaning ports from kdenlive on down to qimageblitz, doing the selfupdate, etc... with the same results. Then I decided to clean all installed ports, etc... and still the same end result. Qimageblitz is killing everything. I don't know what else to do. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:14> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): Replying to [comment:14 mark6691@…]:
I've tried again with cleaning ports from kdenlive on down to qimageblitz, doing the selfupdate, etc... with the same results. Then I decided to clean all installed ports, etc... and still the same end result. Qimageblitz is killing everything. I don't know what else to do.
One last question: Shall I completely uninstall MacPorts subversion and everything with it, and use the .dmg package? Going to lunch briefly, will check back upon return. Thanks. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:15> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): It may not be so good to be on "the bleeding edge". -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:16> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -------------------------------+-------------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive | -------------------------------+-------------------------------------------- Comment(by mark6691@…): Replying to [comment:16 mark6691@…]:
It may not be so good to be on "the bleeding edge".
After a lot of reading (other related tickets), the problem is most definitely with qimageblitz and its inability to recognize that phonon is in fact installed. I hope someone finds a solution. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:17> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -----------------------------------+---------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive qimageblitz | -----------------------------------+---------------------------------------- Changes (by snc@…): * port: kdenlive => kdenlive qimageblitz -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:18> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -----------------------------------+---------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive qimageblitz | -----------------------------------+---------------------------------------- Comment(by snc@…): I took over and updated qimageblitz: r72871. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:19> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -----------------------------------+---------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: kdenlive qimageblitz | -----------------------------------+---------------------------------------- Comment(by jmr@…): So did the update fix this? -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:20> MacPorts <http://www.macports.org/> Ports system for Mac OS
#27007: kdenlive fails to build because of dependency failure -----------------------------------+---------------------------------------- Reporter: mark6691@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: fixed | Keywords: Port: kdenlive qimageblitz | -----------------------------------+---------------------------------------- Changes (by ryandesign@…): * status: reopened => closed * resolution: => fixed Comment: Latest kdenlive installs fine for me so I assume this got fixed somewhere along the way. -- Ticket URL: <https://trac.macports.org/ticket/27007#comment:21> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts