[MacPorts] #17610: xcodebuild: unknown option: -sdk
#17610: xcodebuild: unknown option: -sdk -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: pguyot@… Type: defect | Status: new Priority: Normal | Milestone: MacPorts 1.7.0 Component: base | Version: 1.7.0 Keywords: | Port: sleepwatcher -------------------------------------+-------------------------------------- I successfully built sleepwatcher @2.0.5_0+universal on Mac OS X 10.4.11 Intel with Xcode 2.5 on June 29, 2008. But I can't build it on the same Mac with the same OS and Xcode version today. It says: {{{ $ port -nfd upgrade sleepwatcher DEBUG: Found port in file:///Users/rschmidt/macports/dports/sysutils/sleepwatcher DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sleepwatcher 2.0.5_0 exists in the ports tree DEBUG: sleepwatcher 2.0.5_0 is installed DEBUG: Not following dependencies DEBUG: variants to install {} universal DEBUG: available variants are : universal server DEBUG: variant universal is present in sleepwatcher 2.0.5_0 DEBUG: new portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/sysutils/sleepwatcher DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/xcode-1.0.tcl DEBUG: Re-registering default for use_configure DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for build.pre_args DEBUG: Re-registering default for build.target DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.pre_args DEBUG: Re-registering default for destroot.target DEBUG: Re-registering default for destroot.destdir DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port sleepwatcher. DEBUG: Requested variant i386 is not provided by port sleepwatcher. DEBUG: Requested variant macosx is not provided by port sleepwatcher. DEBUG: Executing variant universal provides universal DEBUG: Executing org.macports.main (sleepwatcher) ---> Fetching sleepwatcher DEBUG: Executing proc-pre-org.macports.fetch-fetch-0 DEBUG: Executing org.macports.fetch (sleepwatcher) ---> sleepwatcher_2.0.5_src.tgz doesn't seem to exist in /mp/var/macports/distfiles/sleepwatcher DEBUG: Pinging www.bernhard-baehr.de... DEBUG: Pinging distfiles.macports.org... DEBUG: Pinging trd.no.distfiles.macports.org... DEBUG: www.bernhard-baehr.de ping time is 153.488 DEBUG: distfiles.macports.org ping time is 64.735 DEBUG: trd.no.distfiles.macports.org ping time is 171.666 ---> Attempting to fetch sleepwatcher_2.0.5_src.tgz from http://distfiles.macports.org/sleepwatcher % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 64416 100 64416 0 0 60857 0 0:00:01 0:00:01 --:--:-- 106k ---> Verifying checksum(s) for sleepwatcher DEBUG: Executing org.macports.checksum (sleepwatcher) ---> Checksumming sleepwatcher_2.0.5_src.tgz DEBUG: Correct (md5) checksum for sleepwatcher_2.0.5_src.tgz DEBUG: Correct (sha1) checksum for sleepwatcher_2.0.5_src.tgz DEBUG: Correct (rmd160) checksum for sleepwatcher_2.0.5_src.tgz ---> Extracting sleepwatcher DEBUG: Executing org.macports.extract (sleepwatcher) ---> Extracting sleepwatcher_2.0.5_src.tgz DEBUG: setting option extract.args to /mp/var/macports/distfiles/sleepwatcher/sleepwatcher_2.0.5_src.tgz DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4' DEBUG: Assembled command: 'cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_sysutils_sleepwatcher/work" && gzip -dc /mp/var/macports/distfiles/sleepwatcher/sleepwatcher_2.0.5_src.tgz | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing proc-post-org.macports.extract-extract-0 DEBUG: Executing org.macports.patch (sleepwatcher) ---> Configuring sleepwatcher DEBUG: Using compiler 'Mac OS X gcc 4.0' DEBUG: Executing org.macports.configure (sleepwatcher) ---> Building sleepwatcher DEBUG: Executing org.macports.build (sleepwatcher) DEBUG: Assembled command: 'cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_sysutils_sleepwatcher/work/sleepwatcher_2.0.5_src" && xcodebuild -alltargets -configuration Deployment build -sdk /Developer/SDKs/MacOSX10.4u.sdk OBJROOT=build/ SYMROOT=build/ ARCHS="ppc i386" MACOSX_DEPLOYMENT_TARGET=10.4 ' unknown option: -sdk Usage: xcodebuild [-project <projectname>] [-activetarget] [-alltargets] [-target <targetname>]... [-activeconfiguration] [-configuration <configurationname>] [<buildsetting>=<value>]... [<buildaction>]... xcodebuild [-version] xcodebuild [-list] Error: Target org.macports.build returned: shell command "cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_sysutils_sleepwatcher/work/sleepwatcher_2.0.5_src" && xcodebuild -alltargets -configuration Deployment build -sdk /Developer/SDKs/MacOSX10.4u.sdk OBJROOT=build/ SYMROOT=build/ ARCHS="ppc i386" MACOSX_DEPLOYMENT_TARGET=10.4 " returned error 1 Command output: unknown option: -sdk Usage: xcodebuild [-project <projectname>] [-activetarget] [-alltargets] [-target <targetname>]... [-activeconfiguration] [-configuration <configurationname>] [<buildsetting>=<value>]... [<buildaction>]... xcodebuild [-version] xcodebuild [-list] Warning: the following items did not execute (for sleepwatcher): org.macports.destroot org.macports.build DEBUG: invalid command name "::ui_init" while executing "::ui_init $priority $prefix $channels $message" ("uplevel" body line 2) invoked from within "uplevel 1 $body" Error: Unable to upgrade port: 1 }}} I had been running MacPorts from trunk. I'm currently running 1.7.0-rc1. I suspect the problem was caused by r41249 which introduced the "`-sdk`" option into the xcode portgroup; perhaps the `-sdk` option only exists as of Xcode 3? It's not listed in Xcode 2.5's "`xcodebuild --help`". -- Ticket URL: <http://trac.macports.org/ticket/17610> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17610: xcodebuild: unknown option: -sdk -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: pguyot@… Type: defect | Status: new Priority: Normal | Milestone: MacPorts 1.7.0 Component: base | Version: 1.7.0 Keywords: | Port: sleepwatcher -------------------------------------+-------------------------------------- Comment(by afb@…): I think it uses the `SDKROOT` environment variable instead ? There should also be `ARCHS`, for setting the architectures... {{{ SDKROOT=/Developer/SDKs/MacOSX10.4u.sdk ARCHS="ppc i386" \ xcodebuild }}} -- Ticket URL: <http://trac.macports.org/ticket/17610#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17610: xcodebuild: unknown option: -sdk -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: pguyot@… Type: defect | Status: new Priority: Normal | Milestone: MacPorts 1.7.0 Component: base | Version: 1.7.0 Keywords: | Port: sleepwatcher -------------------------------------+-------------------------------------- Comment(by toby@…): See r41249 ... looks like the xcode portgroup isn't Tiger-friendly for universal building. Oh well. -- Ticket URL: <http://trac.macports.org/ticket/17610#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17610: xcodebuild: unknown option: -sdk -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: pguyot@… Type: defect | Status: new Priority: Normal | Milestone: MacPorts 1.7.0 Component: base | Version: 1.7.0 Keywords: | Port: sleepwatcher -------------------------------------+-------------------------------------- Comment(by blb@…): With jmr's commit in r43621, can this be closed? -- Ticket URL: <http://trac.macports.org/ticket/17610#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17610: xcodebuild: unknown option: -sdk --------------------------------------+------------------------------------- Reporter: ryandesign@… | Owner: pguyot@… Type: defect | Status: closed Priority: Normal | Milestone: MacPorts 1.7.0 Component: base | Version: 1.7.0 Resolution: fixed | Keywords: Port: sleepwatcher | --------------------------------------+------------------------------------- Changes (by toby@…): * status: new => closed * resolution: => fixed Comment: Yep, looks fixed. -- Ticket URL: <http://trac.macports.org/ticket/17610#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17610: xcodebuild: unknown option: -sdk --------------------------------------+------------------------------------- Reporter: ryandesign@… | Owner: pguyot@… Type: defect | Status: closed Priority: Normal | Milestone: MacPorts 1.7.0 Component: base | Version: 1.7.0 Resolution: fixed | Keywords: Port: sleepwatcher | --------------------------------------+------------------------------------- Comment(by skl@…): I ran into this bug on Leopard 10.5.6 with XCode 3.0 too. The manpage of xcodebuild says: {{{ -default=value Set the user default default to value. }}} so IMO there's only a "=" char missing. After adding "=" to the -sdk option, giving -sdk=/Developer/SDKs/MacOSX10.5.sdk everything ran as expected and the build succeeded. -- Ticket URL: <http://trac.macports.org/ticket/17610#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17610: xcodebuild: unknown option: -sdk --------------------------------------+------------------------------------- Reporter: ryandesign@… | Owner: pguyot@… Type: defect | Status: closed Priority: Normal | Milestone: MacPorts 1.7.0 Component: base | Version: 1.7.0 Resolution: fixed | Keywords: Port: sleepwatcher | --------------------------------------+------------------------------------- Changes (by ryandesign@…): * cc: skl@… (added) Comment: The manpage for the xcodebuild included with Xcode 3.1.2 says: {{{ xcodebuild [-project projectname] [-activetarget] [-alltargets] [-target targetname] [-parallelizeTargets] [-activeconfiguration] [-configuration configurationname] [-sdk <sdkfullpath> | <sdkname>] [buildaction ...] [setting=value ...] [-default=value ...] }}} So, it shows that there should be no equals sign between "-sdk" and the SDK path. Xcode 3.0 is not supported for use with MacPorts; it's too old. Please [http://guide.macports.org/#installing.xcode update]. -- Ticket URL: <http://trac.macports.org/ticket/17610#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts