#20906: babl opcode errors on OS X 10.6 ---------------------------------+------------------------------------------ Reporter: macports@… | Owner: devans@… Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Keywords: | Port: babl ---------------------------------+------------------------------------------ Comment(by macports@…): I'm not sure. I can't build all my ports without +universal because of #20284 However, since 10.6 is x86_64 I don't think the +universal really matters for this issue. -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ---------------------------------+------------------------------------------ Reporter: macports@… | Owner: devans@… Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Keywords: | Port: babl ---------------------------------+------------------------------------------ Description changed by toby@…: Old description:

With +universal on OS X 10.6 I get:

---> Building babl Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_babl/work/babl-0.1.0" && /usr/bin/make -j2 all " returned error 2 Command output: /usr/bin/make all-recursive Making all in babl Making all in base make[3]: Nothing to be done for `all'. /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DLIBDIR=\""/opt/local/lib"\" -I.. -I../babl/base -I/opt/local/include -O2 -arch x86_64 -arch i386 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -c -o babl-cpuaccel.lo babl-cpuaccel.c /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DLIBDIR=\""/opt/local/lib"\" -I.. -I../babl/base -I/opt/local/include -O2 -arch x86_64 -arch i386 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -c -o babl- extension.lo babl-extension.c /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DLIBDIR=\"/opt/local/lib\" -I.. -I../babl/base -I/opt/local/include -O2 -arch x86_64 -arch i386 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -c babl- cpuaccel.c -fno-common -DPIC -o .libs/babl-cpuaccel.o /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DLIBDIR=\"/opt/local/lib\" -I.. -I../babl/base -I/opt/local/include -O2 -arch x86_64 -arch i386 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing- declarations -Winit-self -Wpointer-arith -Wold-style-definition -c babl- extension.c -fno-common -DPIC -o .libs/babl-extension.o /var/tmp//cc1XKwYd.s:125:suffix or operands invalid for `pushf' /var/tmp//cc1XKwYd.s:126:suffix or operands invalid for `pushf' /var/tmp//cc1XKwYd.s:127:suffix or operands invalid for `pop' /var/tmp//cc1XKwYd.s:130:suffix or operands invalid for `push' /var/tmp//cc1XKwYd.s:131:suffix or operands invalid for `popf' /var/tmp//cc1XKwYd.s:132:suffix or operands invalid for `pushf' /var/tmp//cc1XKwYd.s:133:suffix or operands invalid for `pop' /var/tmp//cc1XKwYd.s:134:suffix or operands invalid for `popf' lipo: can't open input file: /var/tmp//ccViRZey.out (No such file or directory) make[3]: *** [babl-cpuaccel.lo] Error 1 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2

Error: Unable to upgrade port: 1

New description: With +universal on OS X 10.6 I get: {{{ ---> Building babl Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_babl/work/babl-0.1.0" && /usr/bin/make -j2 all " returned error 2 Command output: /usr/bin/make all-recursive Making all in babl Making all in base make[3]: Nothing to be done for `all'. /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DLIBDIR=\""/opt/local/lib"\" -I.. -I../babl/base -I/opt/local/include -O2 -arch x86_64 -arch i386 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -c -o babl-cpuaccel.lo babl-cpuaccel.c /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DLIBDIR=\""/opt/local/lib"\" -I.. -I../babl/base -I/opt/local/include -O2 -arch x86_64 -arch i386 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -c -o babl-extension.lo babl-extension.c /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DLIBDIR=\"/opt/local/lib\" -I.. -I../babl/base -I/opt/local/include -O2 -arch x86_64 -arch i386 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -c babl-cpuaccel.c -fno-common -DPIC -o .libs/babl-cpuaccel.o /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DLIBDIR=\"/opt/local/lib\" -I.. -I../babl/base -I/opt/local/include -O2 -arch x86_64 -arch i386 -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -c babl-extension.c -fno-common -DPIC -o .libs/babl-extension.o /var/tmp//cc1XKwYd.s:125:suffix or operands invalid for `pushf' /var/tmp//cc1XKwYd.s:126:suffix or operands invalid for `pushf' /var/tmp//cc1XKwYd.s:127:suffix or operands invalid for `pop' /var/tmp//cc1XKwYd.s:130:suffix or operands invalid for `push' /var/tmp//cc1XKwYd.s:131:suffix or operands invalid for `popf' /var/tmp//cc1XKwYd.s:132:suffix or operands invalid for `pushf' /var/tmp//cc1XKwYd.s:133:suffix or operands invalid for `pop' /var/tmp//cc1XKwYd.s:134:suffix or operands invalid for `popf' lipo: can't open input file: /var/tmp//ccViRZey.out (No such file or directory) make[3]: *** [babl-cpuaccel.lo] Error 1 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Unable to upgrade port: 1 }}} -- -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ---------------------------------+------------------------------------------ Reporter: macports@… | Owner: devans@… Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Keywords: | Port: babl ---------------------------------+------------------------------------------ Comment(by albert.veli@…): Hi! I found a way around this. It's not a fix, but a dirty workaround. After babl fails, edit the file config.h in the build directory /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_babl/work/babl-0.1.0/config.h Comment out line 107 which looks like this: {{{ #define USE_MMX 1 }}} Remove it or comment it out (with // in front of the line). Then build again. It should also be possible to tell configure to disable mmx by sending it the flag: --disable-mmx But I am new to macports and I don't know how to send configure flags to packages. -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ----------------------------------+----------------------------------------- Reporter: macports@… | Owner: devans@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Resolution: fixed | Keywords: Port: babl | ----------------------------------+----------------------------------------- Changes (by devans@…): * status: assigned => closed * resolution: => fixed Comment: Changes committed in r56651 to disable MMX support on 10.6 only. -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ----------------------------------+----------------------------------------- Reporter: macports@… | Owner: devans@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Resolution: fixed | Keywords: Port: babl | ----------------------------------+----------------------------------------- Comment(by devans@…): Obviously since disabling MMX defeats the intended purpose of babl to some extent (accelerated pixel operations). There are a number of instances now where MMX is broken on 10.6 so we need to understand is causing this and whether this is a configuration issue or whether the code needs to be modified upstream. There is also some possibility that MacPorts 1.8's assertion of -arch is causing the problems. So this is a work around until the problem is better understood. -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:11> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ----------------------------------+----------------------------------------- Reporter: macports@… | Owner: devans@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Resolution: fixed | Keywords: Port: babl | ----------------------------------+----------------------------------------- Comment(by albert.veli@…): I have done some more investigations into this and I traced it to the function arch_get_vendor(), and the following section: {{{ #ifndef ARCH_X86_64 /* Only need to check this on ia32 */ __asm__ ("pushfl\n\t" "pushfl\n\t" "popl %0\n\t" "movl %0,%1\n\t" "xorl $0x200000,%0\n\t" "pushl %0\n\t" "popfl\n\t" "pushfl\n\t" "popl %0\n\t" "popfl" : "=a" (eax), "=c" (ecx) : : "cc"); if (eax == ecx) return ARCH_X86_VENDOR_NONE; #endif }}} This trouble code should not be run if arch is x86_64, but it is run anyway. So I noted configure detects the build system as "i386-apple- darwin10.0.0". This in turn comments out the ARCH_X86_64 define from config.h. So I tried to force it to set ARCH_X86_64 by writing the following into the babl portfile: configure.args = --build=x86_64-apple-darwin10.0.0 I have no idea if this is a good solution, but at least it works for babl. And it works for gegl too. -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:13> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ----------------------------------+----------------------------------------- Reporter: macports@… | Owner: devans@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Resolution: | Keywords: Port: babl gegl | ----------------------------------+----------------------------------------- Changes (by jmr@…): * port: babl => babl gegl Comment: Should just be a matter of something like: {{{ if {${os.platform} == "darwin"} { configure.args-append --build=${build_arch}-apple-darwin${os.major} } }}} -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:15> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ----------------------------------+----------------------------------------- Reporter: macports@… | Owner: devans@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Resolution: | Keywords: Port: babl gegl | ----------------------------------+----------------------------------------- Comment(by macports@…): I have a 64-bit capable processor. How do I an build i386 (32-bit) version on 10.6? Isn't x86_64 the only sane option? -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:18> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ----------------------------------+----------------------------------------- Reporter: macports@… | Owner: devans@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Resolution: | Keywords: Port: babl gegl | ----------------------------------+----------------------------------------- Comment(by swebster@…): It seems that autoconf fixed this upstream because if you just download the latest babl with git it builds fine. So I think we just need a new babl distfile where the configure scripts etc. have been created with the correct autoconf etc. -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:20> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ----------------------------------+----------------------------------------- Reporter: macports@… | Owner: devans@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Resolution: | Keywords: Port: babl gegl | ----------------------------------+----------------------------------------- Comment(by swebster@…): Unfortunately the latest babl and gegl (0.1.2, which is newer than the 0.1.0 in macports) don't have the problem fixed. I downloaded and configured them but it still detects i386. -- Ticket URL: <http://trac.macports.org/ticket/20906#comment:22> MacPorts <http://www.macports.org/> Ports system for Mac OS

#20906: babl opcode errors on OS X 10.6 ----------------------------------+----------------------------------------- Reporter: macports@… | Owner: devans@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Resolution: fixed | Keywords: haspatch Port: babl gegl | ----------------------------------+----------------------------------------- Changes (by jmr@…): * status: reopened => closed * resolution: => fixed Comment: r74147 (maintainer timeout) -- Ticket URL: <https://trac.macports.org/ticket/20906#comment:24> MacPorts <http://www.macports.org/> Ports system for Mac OS