[MacPorts] #44786: list of dependencies to be installed can be inaccurate
#44786: list of dependencies to be installed can be inaccurate ----------------------+---------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Keywords: | Port: ----------------------+---------------------- The `gsoc14-interactive` dependency list may incorrectly include ports that are not actually built and installed. {{{ % port -v installed rdepof:libgcrypt The following ports are currently installed: expat @2.1.0_0 (active) platform='darwin 11' archs='x86_64' gettext @0.19.2_0 (active) platform='darwin 11' archs='x86_64' libiconv @1.14_0 (active) platform='darwin 11' archs='x86_64' ncurses @5.9_2 (active) platform='darwin 11' archs='x86_64' % sudo port install libgcrypt ---> Computing dependencies for libgcrypt The following dependencies will be installed: libgpg-error Continue? [Y/n]: n ---> Scanning binaries for linking errors ---> No broken files found. % sudo port install libgcrypt configure.build_arch=i386 Password: ---> Computing dependencies for libgcrypt The following dependencies will be installed: expat gettext libgpg-error libiconv ncurses Continue? [Y/n]: Y ---> Fetching source for libgpg-error ---> Verifying checksums for libgpg-error ---> Extracting libgpg-error ---> Applying patches to libgpg-error ---> Configuring libgpg-error ---> Building libgpg-error ---> Staging libgpg-error into destroot ---> Installing libgpg-error @1.13_0 ---> Activating libgpg-error @1.13_0 ---> Cleaning libgpg-error ---> Fetching source for libgcrypt ---> Verifying checksums for libgcrypt ---> Extracting libgcrypt ---> Applying patches to libgcrypt ---> Configuring libgcrypt ---> Building libgcrypt ---> Staging libgcrypt into destroot ---> Installing libgcrypt @1.6.1_0 ---> Activating libgcrypt @1.6.1_0 ---> Cleaning libgcrypt ---> Updating database of binaries ---> Scanning binaries for linking errors ---> No broken files found. sudo port install libgcrypt configure.build_arch=i386 20.57s user 12.60s system 117% cpu 28.283 total % }}} This is admittedly a bit of an odd bug: The dependency list is simultaneously correct (the dependencies ought to be rebuilt as `+universal`) and incorrect (it does not reflect what will actually happen). Of course, the actual install behavior is incorrect and should be fixed, but the dependency list should not be making false promises. -- Ticket URL: <https://trac.macports.org/ticket/44786> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+---------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: Port: | -----------------------+---------------------- Comment (by jmr@…): The deps that are already installed should be universalised by upgrade_mport_deps before mportdepends is even called to generate the list that is printed. Can we have debug output please? Any difference if you override build_arch and not just configure.build_arch? -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:1> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+---------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: Port: | -----------------------+---------------------- Comment (by larryv@…): Doesn’t seem to make a difference, unless I’m doing something wrong. {{{ % sudo port -k install libgcrypt build_arch=i386 Password: ---> Computing dependencies for libgcrypt The following dependencies will be installed: expat gettext libgpg-error libiconv ncurses Continue? [Y/n]: Y ---> Fetching source for libgpg-error ---> Verifying checksums for libgpg-error ---> Extracting libgpg-error ---> Applying patches to libgpg-error ---> Configuring libgpg-error ---> Building libgpg-error ---> Staging libgpg-error into destroot ---> Installing libgpg-error @1.13_0 ---> Activating libgpg-error @1.13_0 ---> Fetching source for libgcrypt ---> Verifying checksums for libgcrypt ---> Extracting libgcrypt ---> Applying patches to libgcrypt ---> Configuring libgcrypt ---> Building libgcrypt ---> Staging libgcrypt into destroot ---> Installing libgcrypt @1.6.1_0 ---> Activating libgcrypt @1.6.1_0 ---> Updating database of binaries ---> Scanning binaries for linking errors ---> No broken files found. sudo port -k install libgcrypt build_arch=i386 20.13s user 22.26s system 139% cpu 30.472 total % }}} I’ve attached the log file. -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:2> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+---------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: Port: | -----------------------+---------------------- Comment (by jmr@…): The disparity between the printed list and what’s actually installed is easy to explain at least: Nothing happens when you try to install a port that is already installed with the same name,version,variants. The question is why they’re not being upgraded with +universal before the “computing dependencies” message. Maybe add some more debug messages in and around upgrade_mport_deps? -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:3> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+---------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: Port: | -----------------------+---------------------- Comment (by jmr@…): Actually, I think I see the problem. I believe it would work if you installed libgpg-error first. I doubt this was introduced by the GSoC project. In fact upgrade_mport_deps only operates on direct dependencies that are already installed. I think mportdepends is doing something a bit wrong in this case and building a dep tree with everything’s build_archs=i386, rather than realising it needs to add +universal to the ones that are already installed. -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:4> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+---------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: Port: | -----------------------+---------------------- Comment (by larryv@…): Replying to [comment:4 jmr@…]:
Actually, I think I see the problem. I believe it would work if you installed libgpg-error first.
This does seem to be the case. {{{ % port -y install libgpg-error build_arch=i386 Error: Insufficient privileges to write to MacPorts install prefix. Warning: MacPorts running without privileges. You may be unable to complete certain actions (e.g. install). For gperf: skipping org.macports.main (dry run) Skipping deactivate gperf @3.0.4_2 (dry run) Skipping activate gperf @3.0.4_2+universal (dry run) ---> Computing dependencies for libiconv For libiconv: skipping org.macports.main (dry run) Skipping deactivate libiconv @1.14_0 (dry run) Skipping activate libiconv @1.14_0+universal (dry run) For expat: skipping org.macports.main (dry run) Skipping deactivate expat @2.1.0_0 (dry run) Skipping activate expat @2.1.0_0+universal (dry run) For ncurses: skipping org.macports.main (dry run) Skipping deactivate ncurses @5.9_2 (dry run) Skipping activate ncurses @5.9_2+universal (dry run) ---> Computing dependencies for gettext The following dependencies will be installed: expat libiconv ncurses Continue? [Y/n]: For expat: skipping org.macports.main (dry run) For libiconv: skipping org.macports.main (dry run) For ncurses: skipping org.macports.main (dry run) For gettext: skipping org.macports.main (dry run) Skipping deactivate gettext @0.19.2_0 (dry run) Skipping activate gettext @0.19.2_0+universal (dry run) ---> Computing dependencies for libgpg-error The following dependencies will be installed: expat gettext libiconv ncurses Continue? [Y/n]: For libgpg-error: skipping org.macports.main (dry run) % }}} -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:5> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+-------------------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: gsoc14-interactive Port: | -----------------------+-------------------------------- Changes (by larryv@…): * keywords: => gsoc14-interactive -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:6> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+-------------------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: gsoc14-interactive Port: | -----------------------+-------------------------------- Comment (by jmr@…): I think maybe this also would work correctly if you set configure.build_arch in the portfile rather than overriding it on the command line. (The override gets passed on to the dependencies, so they parse with build_arch=i386 rather than their actual installed arch.) -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:7> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+-------------------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: gsoc14-interactive Port: | -----------------------+-------------------------------- Comment (by jmr@…): What’s with the keyword BTW? I’m almost certain that the same incorrect dependency list would have been displayed before gsoc14-interactive was merged. -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:8> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+---------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: Port: | -----------------------+---------------------- Changes (by larryv@…): * keywords: gsoc14-interactive => Comment: Forgot that you already mentioned that; sorry. -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:9> MacPorts <http://www.macports.org/> Ports system for OS X
#44786: list of dependencies to be installed can be inaccurate -----------------------+---------------------- Reporter: larryv@… | Owner: shasha@… Type: defect | Status: new Priority: Normal | Milestone: Component: base | Version: 2.3.99 Resolution: | Keywords: Port: | -----------------------+---------------------- Comment (by larryv@…): Replying to [comment:7 jmr@…]:
I think maybe this also would work correctly if you set configure.build_arch in the portfile rather than overriding it on the command line. (The override gets passed on to the dependencies, so they parse with build_arch=i386 rather than their actual installed arch.)
This seems right. After adding “`configure.build_arch i386`” to `libgcrypt`’s Portfile: {{{ % port edit libgcrypt % sudo port -k install libgcrypt Portfile changed since last build; discarding previous state. ---> Computing dependencies for libgcrypt The following dependencies will be installed: expat gettext gperf libgpg-error libiconv ncurses Continue? [Y/n]: ---> Fetching source for expat ---> Verifying checksums for expat ---> Extracting expat ---> Configuring expat ---> Building expat ---> Staging expat into destroot ---> Installing expat @2.1.0_0+universal ---> Deactivating expat @2.1.0_0 ---> Cleaning expat ---> Activating expat @2.1.0_0+universal ---> Fetching source for gperf ---> Verifying checksums for gperf ---> Extracting gperf ---> Applying patches to gperf ---> Configuring gperf ---> Building gperf ---> Staging gperf into destroot ---> Installing gperf @3.0.4_2+universal ---> Activating gperf @3.0.4_2+universal ---> Fetching source for libiconv ---> Verifying checksums for libiconv ---> Extracting libiconv ---> Applying patches to libiconv ---> Configuring libiconv ^CError: Failed to configure libiconv, consult /opt/local/var/macports/build/_Users_larryv_Projects_MacPorts_git- svn_trunk_dports_textproc_libiconv/libiconv/work/libiconv-1.14-x86_64/config.log Error: Failed to configure libiconv: configure failure: checking for CFLocaleCopyCurrent... SIGINT signal received Error: See /opt/local/var/macports/logs /_Users_larryv_Projects_MacPorts_git- svn_trunk_dports_textproc_libiconv/libiconv/main.log for details. Error: Follow http://guide.macports.org/#project.tickets to report a bug. Error: Processing of port libgcrypt failed sudo port -k install libgcrypt 10.56s user 7.26s system 37% cpu 47.921 total % }}} -- Ticket URL: <https://trac.macports.org/ticket/44786#comment:10> MacPorts <http://www.macports.org/> Ports system for OS X
participants (1)
-
MacPorts