[MacPorts] #37364: ntfs-3g (error: C compiler cannot create executables)
#37364: ntfs-3g (error: C compiler cannot create executables) -----------------------------------------+-------------------------------- Reporter: mkk@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: ntfs-3d compile executables | Port: ntfs-3g -----------------------------------------+-------------------------------- {{{ :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.27.1_1 exists in the ports tree :debug:main pkgconfig 0.27.1_1 is the latest installed :debug:main pkgconfig 0.27.1_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.27.1_1 >= pkgconfig 0.27.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fuse4x 0.9.2_0 exists in the ports tree :debug:main fuse4x 0.9.2_0 is the latest installed :debug:main fuse4x 0.9.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/fuse/fuse4x :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! fuse4x 0.9.2_0 >= fuse4x 0.9.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fuse4x-kext 0.9.2_0 exists in the ports tree :debug:main fuse4x-kext 0.9.2_0 +universal is the latest installed :debug:main fuse4x-kext 0.9.2_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/fuse /fuse4x-kext :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcode-1.0.tcl :debug:main Re-registering default for use_configure :debug:main Re-registering default for universal_variant :debug:main Re-registering default for build.type :debug:main Re-registering default for build.pre_args :debug:main Re-registering default for build.target :debug:main Re-registering default for destroot.pre_args :debug:main Re-registering default for destroot.target :debug:main Re-registering default for destroot.destdir :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! fuse4x-kext 0.9.2_0 >= fuse4x-kext 0.9.2_0 :msg:main ---> Computing dependencies for ntfs-3g:info:main .:debug:main ntfs-3g has no conflicts :debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: fuse4x :debug:main Found Dependency: receipt exists for fuse4x :msg:main :debug:main Executing org.macports.main (ntfs-3g) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 501 :debug:main Skipping completed org.macports.archivefetch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:configure configure phase started at Fri Dec 21 12:43:29 CET 2012 :notice:configure ---> Configuring ntfs-3g :debug:configure Using compiler 'Mac OS X clang' :debug:configure Executing org.macports.configure (ntfs-3g) :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -framework CoreFoundation -lintl -arch x86_64' OBJC='/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external' :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external :info:configure checking build system type... i386-apple-darwin12.2.0 :info:configure checking host system type... i386-apple-darwin12.2.0 :info:configure checking target system type... i386-apple-darwin12.2.0 :info:configure checking for a BSD-compatible install... /usr/bin/install -c :info:configure checking whether build environment is sane... yes :info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d :info:configure checking for gawk... no :info:configure checking for mawk... no :info:configure checking for nawk... no :info:configure checking for awk... awk :info:configure checking whether make sets $(MAKE)... yes :info:configure checking whether to enable maintainer-specific portions of Makefiles... no :info:configure checking for C compiler default output file name... :info:configure configure: error: C compiler cannot create executables :info:configure See `config.log' for more details. :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external :info:configure Exit code: 77 :error:configure org.macports.configure for port ntfs-3g returned: configure failure: command execution failed :debug:configure Error code: NONE :debug:configure Backtrace: configure failure: command execution failed while executing "$procedure $targetname" :info:configure Warning: targets not executed for ntfs-3g: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Please see the log file for port ntfs-3g for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/main.log }}} I was looking for similar problems ( https://trac.macports.org/ticket/35580 ) but: XCode runs well (I can compile C applications) and I have installed Command Line Tools. -- Ticket URL: <https://trac.macports.org/ticket/37364> MacPorts <http://www.macports.org/> Ports system for Mac OS
#37364: ntfs-3g (error: C compiler cannot create executables) ----------------------+----------------------------------------- Reporter: mkk@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: ntfs-3d compile executables Port: ntfs-3g | ----------------------+----------------------------------------- Comment (by egall@…): Could you attach the `config.log` it mentions? -- Ticket URL: <https://trac.macports.org/ticket/37364#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#37364: ntfs-3g (error: C compiler cannot create executables) ----------------------+----------------------------------------- Reporter: mkk@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: ntfs-3d compile executables Port: ntfs-3g | ----------------------+----------------------------------------- Comment (by mkk@…): Stupid thing... Now it works... Maybe after rebooting it's OK, have no idea, but I have done "clear" for ntfs-3g. I don't understand it. Where can I find this config.log? -- Ticket URL: <https://trac.macports.org/ticket/37364#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#37364: ntfs-3g (error: C compiler cannot create executables) ----------------------+--------------------- Reporter: mkk@… | Owner: petri@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: ntfs-3g | ----------------------+--------------------- Changes (by jmr@…): * keywords: ntfs-3d compile executables => * owner: macports-tickets@… => petri@… Comment: The config.log would be a subdir or two under the location shown by `port work ntfs-3g`. -- Ticket URL: <https://trac.macports.org/ticket/37364#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#37364: ntfs-3g (error: C compiler cannot create executables) ----------------------+--------------------- Reporter: mkk@… | Owner: petri@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: ntfs-3g | ----------------------+--------------------- Comment (by frank_bla1@…): I can double this. I've just reinstalled my MBP from scratch, then installed xcode, including command line tools and MacPorts 2.1.2. So i started from a completely blank MacPorts instance and just did a "port install ntfs-3g". It then installed: {{{ fuse4x @0.9.2 fuse/fuse4x fuse4x-kext @0.9.2 fuse/fuse4x-kext libiconv @1.14 textproc/libiconv pkgconfig @0.27.1 devel/pkgconfig }}} and while installing ntfs-3g, the above error occured. After some fiddling around, I tried "port install autoconf" - which added the following stuff (which is pretty much, for the single purpose of mounting some ntfs disks :-( ). {{{ autoconf @2.69 devel/autoconf expat @2.1.0 textproc/expat fuse4x @0.9.2 fuse/fuse4x fuse4x-kext @0.9.2 fuse/fuse4x-kext gdbm @1.10 databases/gdbm gettext @0.18.2 devel/gettext help2man @1.40.10 textproc/help2man libiconv @1.14 textproc/libiconv m4 @1.4.16 devel/m4 ncurses @5.9 devel/ncurses ntfs-3g @2012.1.15 fuse/ntfs-3g p5.12-locale-gettext @1.50.0 perl/p5-locale-gettext perl5 @5.12.4 lang/perl5 perl5.12 @5.12.4 lang/perl5.12 pkgconfig @0.27.1 devel/pkgconfig }}} But now you can see ntfs-3g is successfully installed. "autoconf" is mentioned as a dependency for fuse4x in the ports list on the macports homepage. I don't know if this (and the other dependencies) are really needed for ntfs-3g. Hopefully someone could sort this out? Thanks, Frank -- Ticket URL: <https://trac.macports.org/ticket/37364#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#37364: ntfs-3g (error: C compiler cannot create executables) ----------------------+--------------------- Reporter: mkk@… | Owner: petri@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: ntfs-3g | ----------------------+--------------------- Comment (by frank_bla1@…): Ok, after I found http://fernandoff.posterous.com/ntfs-3g-20120115-binary-installer I could boil it down to {{{ expat @2.1.0 textproc/expat fuse4x @0.9.2 fuse/fuse4x fuse4x-kext @0.9.2 fuse/fuse4x-kext gettext @0.18.2 devel/gettext libiconv @1.14 textproc/libiconv ncurses @5.9 devel/ncurses ntfs-3g @2012.1.15 fuse/ntfs-3g pkgconfig @0.27.1 devel/pkgconfig }}} The config.log - reported a missing -lintl. This seems to be delivered with "gettext" which is part of the "autoconf" dependencies. -- Ticket URL: <https://trac.macports.org/ticket/37364#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#37364: ntfs-3g (error: C compiler cannot create executables) ----------------------+--------------------- Reporter: mkk@… | Owner: petri@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: ntfs-3g | ----------------------+--------------------- Comment (by mkk@…): I've just installed installed MacPorts on new MacBook. I can confirm that installing ntfs-3g produces the same error as before and installing "gettext" solves it. -- Ticket URL: <https://trac.macports.org/ticket/37364#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#37364: ntfs-3g (error: C compiler cannot create executables) ----------------------+--------------------- Reporter: mkk@… | Owner: petri@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: fixed | Keywords: Port: ntfs-3g | ----------------------+--------------------- Changes (by ryandesign@…): * cc: ryandesign@… (added) * status: new => closed * resolution: => fixed Old description:
{{{ :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.27.1_1 exists in the ports tree :debug:main pkgconfig 0.27.1_1 is the latest installed :debug:main pkgconfig 0.27.1_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.27.1_1 >= pkgconfig 0.27.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fuse4x 0.9.2_0 exists in the ports tree :debug:main fuse4x 0.9.2_0 is the latest installed :debug:main fuse4x 0.9.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/fuse/fuse4x :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! fuse4x 0.9.2_0 >= fuse4x 0.9.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fuse4x-kext 0.9.2_0 exists in the ports tree :debug:main fuse4x-kext 0.9.2_0 +universal is the latest installed :debug:main fuse4x-kext 0.9.2_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/fuse /fuse4x-kext :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcode-1.0.tcl :debug:main Re-registering default for use_configure :debug:main Re-registering default for universal_variant :debug:main Re-registering default for build.type :debug:main Re-registering default for build.pre_args :debug:main Re-registering default for build.target :debug:main Re-registering default for destroot.pre_args :debug:main Re-registering default for destroot.target :debug:main Re-registering default for destroot.destdir :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! fuse4x-kext 0.9.2_0 >= fuse4x-kext 0.9.2_0 :msg:main ---> Computing dependencies for ntfs-3g:info:main .:debug:main ntfs-3g has no conflicts :debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: fuse4x :debug:main Found Dependency: receipt exists for fuse4x :msg:main :debug:main Executing org.macports.main (ntfs-3g) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 501 :debug:main Skipping completed org.macports.archivefetch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:configure configure phase started at Fri Dec 21 12:43:29 CET 2012 :notice:configure ---> Configuring ntfs-3g :debug:configure Using compiler 'Mac OS X clang' :debug:configure Executing org.macports.configure (ntfs-3g) :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -framework CoreFoundation -lintl -arch x86_64' OBJC='/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external' :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external :info:configure checking build system type... i386-apple-darwin12.2.0 :info:configure checking host system type... i386-apple-darwin12.2.0 :info:configure checking target system type... i386-apple-darwin12.2.0 :info:configure checking for a BSD-compatible install... /usr/bin/install -c :info:configure checking whether build environment is sane... yes :info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d :info:configure checking for gawk... no :info:configure checking for mawk... no :info:configure checking for nawk... no :info:configure checking for awk... awk :info:configure checking whether make sets $(MAKE)... yes :info:configure checking whether to enable maintainer-specific portions of Makefiles... no :info:configure checking for C compiler default output file name... :info:configure configure: error: C compiler cannot create executables :info:configure See `config.log' for more details. :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external :info:configure Exit code: 77 :error:configure org.macports.configure for port ntfs-3g returned: configure failure: command execution failed :debug:configure Error code: NONE :debug:configure Backtrace: configure failure: command execution failed while executing "$procedure $targetname" :info:configure Warning: targets not executed for ntfs-3g: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Please see the log file for port ntfs-3g for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/main.log }}}
I was looking for similar problems ( https://trac.macports.org/ticket/35580 ) but: XCode runs well (I can compile C applications) and I have installed Command Line Tools.
New description: {{{ :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.27.1_1 exists in the ports tree :debug:main pkgconfig 0.27.1_1 is the latest installed :debug:main pkgconfig 0.27.1_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.27.1_1 >= pkgconfig 0.27.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fuse4x 0.9.2_0 exists in the ports tree :debug:main fuse4x 0.9.2_0 is the latest installed :debug:main fuse4x 0.9.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/fuse/fuse4x :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! fuse4x 0.9.2_0 >= fuse4x 0.9.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fuse4x-kext 0.9.2_0 exists in the ports tree :debug:main fuse4x-kext 0.9.2_0 +universal is the latest installed :debug:main fuse4x-kext 0.9.2_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/fuse /fuse4x-kext :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcode-1.0.tcl :debug:main Re-registering default for use_configure :debug:main Re-registering default for universal_variant :debug:main Re-registering default for build.type :debug:main Re-registering default for build.pre_args :debug:main Re-registering default for build.target :debug:main Re-registering default for destroot.pre_args :debug:main Re-registering default for destroot.target :debug:main Re-registering default for destroot.destdir :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! fuse4x-kext 0.9.2_0 >= fuse4x-kext 0.9.2_0 :msg:main ---> Computing dependencies for ntfs-3g:info:main .:debug:main ntfs-3g has no conflicts :debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: fuse4x :debug:main Found Dependency: receipt exists for fuse4x :msg:main :debug:main Executing org.macports.main (ntfs-3g) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 501 :debug:main Skipping completed org.macports.archivefetch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (ntfs-3g) :debug:main Privilege de-escalation not attempted as not running as root. :debug:configure configure phase started at Fri Dec 21 12:43:29 CET 2012 :notice:configure ---> Configuring ntfs-3g :debug:configure Using compiler 'Mac OS X clang' :debug:configure Executing org.macports.configure (ntfs-3g) :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -framework CoreFoundation -lintl -arch x86_64' OBJC='/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external' :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external :info:configure checking build system type... i386-apple-darwin12.2.0 :info:configure checking host system type... i386-apple-darwin12.2.0 :info:configure checking target system type... i386-apple-darwin12.2.0 :info:configure checking for a BSD-compatible install... /usr/bin/install -c :info:configure checking whether build environment is sane... yes :info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d :info:configure checking for gawk... no :info:configure checking for mawk... no :info:configure checking for nawk... no :info:configure checking for awk... awk :info:configure checking whether make sets $(MAKE)... yes :info:configure checking whether to enable maintainer-specific portions of Makefiles... no :info:configure checking for C compiler default output file name... :info:configure configure: error: C compiler cannot create executables :info:configure See `config.log' for more details. :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/work/ntfs- 3g_ntfsprogs-2012.1.15" && ./configure --prefix=/opt/local --exec- prefix=/opt/local --with-fuse=external :info:configure Exit code: 77 :error:configure org.macports.configure for port ntfs-3g returned: configure failure: command execution failed :debug:configure Error code: NONE :debug:configure Backtrace: configure failure: command execution failed while executing "$procedure $targetname" :info:configure Warning: targets not executed for ntfs-3g: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Please see the log file for port ntfs-3g for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_fuse_ntfs-3g/ntfs-3g/main.log }}} I was looking for similar problems (#35580) but: XCode runs well (I can compile C applications) and I have installed Command Line Tools. -- Comment: r102853 -- Ticket URL: <https://trac.macports.org/ticket/37364#comment:8> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts