[MacPorts] #51306: octave-control install problem, fetch is failing
#51306: octave-control install problem, fetch is failing --------------------+-------------------------------- Reporter: gps@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: octave-control --------------------+-------------------------------- - I upgraded to El Capitan. - I completely uninstalled all mac ports, and deleted all related macports files from the system. - I've been installing selected packages from scratch. octave-control always fails. The problem appears to be with the fetch of the package. - Once it fails I try 'port clean octave-control' and always run into the same problem. - From the log (attached to the ticket). I see that the fetch is failing. :info:archivefetch ---> octave-control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from https://packages.macports.org/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from http://sea.us.packages.macports.org/macports/packages/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from http://lil.fr.packages.macports.org/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found This seems to cause other errors later in the process (see the attached log file). -- Ticket URL: <https://trac.macports.org/ticket/51306> MacPorts <https://www.macports.org/> Ports system for OS X
#51306: octave-control install problem, fetch is failing -----------------------------+---------------------------- Reporter: gps@… | Owner: mschamschula@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Resolution: | Keywords: Port: octave-control | -----------------------------+---------------------------- Changes (by mf2k@…): * owner: macports-tickets@… => mschamschula@… Comment: In the future, please use WikiFormatting and Cc the port maintainers ({{{port info --maintainers octave-control}}}), if any. -- Ticket URL: <https://trac.macports.org/ticket/51306#comment:1> MacPorts <https://www.macports.org/> Ports system for OS X
#51306: octave-control install problem, fetch is failing -----------------------------+---------------------------- Reporter: gps@… | Owner: mschamschula@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Resolution: | Keywords: Port: octave-control | -----------------------------+---------------------------- Description changed by mf2k@…: Old description:
- I upgraded to El Capitan. - I completely uninstalled all mac ports, and deleted all related macports files from the system. - I've been installing selected packages from scratch. octave-control always fails. The problem appears to be with the fetch of the package. - Once it fails I try 'port clean octave-control' and always run into the same problem. - From the log (attached to the ticket). I see that the fetch is failing.
:info:archivefetch ---> octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from https://packages.macports.org/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from http://sea.us.packages.macports.org/macports/packages/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from http://lil.fr.packages.macports.org/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found
This seems to cause other errors later in the process (see the attached log file).
New description: - I upgraded to El Capitan. - I completely uninstalled all mac ports, and deleted all related macports files from the system. - I've been installing selected packages from scratch. octave-control always fails. The problem appears to be with the fetch of the package. - Once it fails I try 'port clean octave-control' and always run into the same problem. - From the log (attached to the ticket). I see that the fetch is failing. {{{ :info:archivefetch ---> octave-control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from https://packages.macports.org/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from http://sea.us.packages.macports.org/macports/packages/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found :msg:archivefetch ---> Attempting to fetch octave- control-3.0.0_0+gcc5.darwin_15.x86_64.tbz2 from http://lil.fr.packages.macports.org/octave-control :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 Not Found }}} This seems to cause other errors later in the process (see the attached log file). -- -- Ticket URL: <https://trac.macports.org/ticket/51306#comment:2> MacPorts <https://www.macports.org/> Ports system for OS X
#51306: octave-control: configure failure -----------------------------+---------------------------- Reporter: gps@… | Owner: mschamschula@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Resolution: | Keywords: Port: octave-control | -----------------------------+---------------------------- Comment (by mf2k@…): Per your log, it fetches just fine. The problem is in the configure phase. -- Ticket URL: <https://trac.macports.org/ticket/51306#comment:3> MacPorts <https://www.macports.org/> Ports system for OS X
#51306: octave-control: configure failure -----------------------------+------------------- Reporter: gps@… | Owner: mps@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Resolution: | Keywords: Port: octave-control | -----------------------------+------------------- Changes (by mps@…): * owner: mschamschula@… => mps@… Comment: It looks like your real problem is {{{ 2098 :info:configure ld: warning: could not create compact unwind for _dhseqr_: stack subq instruction is too different from dwarf stack size 2099 :info:configure Undefined symbols for architecture x86_64: 2100 :info:configure "_dgegs_", referenced from: 2101 :info:configure _sg03ad_ in slicotlibrary.a(SG03AD.o) 2102 :info:configure _sg03bd_ in slicotlibrary.a(SG03BD.o) 2103 :info:configure "_dlatzm_", referenced from: 2104 :info:configure _ab08nx_ in slicotlibrary.a(AB08NX.o) 2105 :info:configure _ag08by_ in slicotlibrary.a(AG08BY.o) 2106 :info:configure _sb01by_ in slicotlibrary.a(SB01BY.o) 2107 :info:configure _sb01fy_ in slicotlibrary.a(SB01FY.o) 2108 :info:configure ld: symbol(s) not found for architecture x86_64 2109 :info:configure clang: error: linker command failed with exit code 1 (use -v to see invocation) 2110 :info:configure make: *** [__control_slicot_functions__.oct] Error 1 2111 :info:configure }}} Which version of octave did you install? (i.e. octave, octave-devel, octave-devel-rc or octave-devel-release) -- Ticket URL: <https://trac.macports.org/ticket/51306#comment:4> MacPorts <https://www.macports.org/> Ports system for OS X
#51306: octave-control: configure failure -----------------------------+------------------- Reporter: gps@… | Owner: mps@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Resolution: | Keywords: Port: octave-control | -----------------------------+------------------- Comment (by mps@…): I just installed octave-control against octave-devel-release (octave 4.0.1) under El Capitan and Xcode 7.3.1, w/o any problems. Try sudo port clean octave-control sudo port install octave-control as there may be remnants of a previous build. -- Ticket URL: <https://trac.macports.org/ticket/51306#comment:5> MacPorts <https://www.macports.org/> Ports system for OS X
#51306: octave-control: configure failure -----------------------------+------------------- Reporter: gps@… | Owner: mps@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Resolution: | Keywords: Port: octave-control | -----------------------------+------------------- Comment (by gps@…): Replying to [comment:5 mps@…]:
I just installed octave-control against octave-devel-release (octave 4.0.1) under El Capitan and Xcode 7.3.1, w/o any problems.
Try
sudo port clean octave-control
sudo port install octave-control
as there may be remnants of a previous build.
Thanks for you're response. This is the first ticket that I've filed and did not fully understand the formatting conventions. I apologize. I completely uninstalled macports including deleting all macports residuals per the "uninstall" page. I reinstalled macports from scratch and per your suggestion installed octave-devel-release rather than octave. I also did a "port clean octave-control" just in case. I then installed octave-control and ran into the same issue as before. I do see your notes above about the loader errors. From the log file it appears that octave-control is linking to /opt/local/lib/octave/3.8.2 rather than /opt/local/lib/octave/4.0.1. I'm not sure how to proceed here and would appreciate any suggestions. I will attempt to upload the latest log file as well. Thanks for your help. -- Ticket URL: <https://trac.macports.org/ticket/51306#comment:6> MacPorts <https://www.macports.org/> Ports system for OS X
#51306: octave-control: configure failure -----------------------------+------------------- Reporter: gps@… | Owner: mps@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Resolution: | Keywords: Port: octave-control | -----------------------------+------------------- Comment (by mps@…): If you reinstalled MacPorts, there should not be any octave 3.8.2. What does {{{port installed octave}}} show? It should print out {{{None of the specified ports are installed.}}} Otherwise, you need to uninstall octave. Also you need to run {{{sudo port select octave octave-revel-release}}} Otherwise mkoctfile won't be found. -- Ticket URL: <https://trac.macports.org/ticket/51306#comment:7> MacPorts <https://www.macports.org/> Ports system for OS X
#51306: octave-control: configure failure -----------------------------+------------------- Reporter: gps@… | Owner: mps@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Resolution: | Keywords: Port: octave-control | -----------------------------+------------------- Comment (by gps@…): I was able to install octave-control today. The source of the problem was odd. I apparently had an install of xquartz from long ago in the /opt directory. This was confusing the dependencies. I did a total uninstall of macports followed by an uninstall of xquartz, and then a re- insteall from scratch. Every is working fine now. -- Ticket URL: <https://trac.macports.org/ticket/51306#comment:8> MacPorts <https://www.macports.org/> Ports system for OS X
participants (1)
-
MacPorts