[MacPorts] #38227: I cannot install apt with mac ports - Error: org.macports.build for port apt returned: command execution failed
#38227: I cannot install apt with mac ports - Error: org.macports.build for port apt returned: command execution failed -----------------------------+-------------------------------- Reporter: santoscandrea@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: -----------------------------+-------------------------------- OSx: 10.6.8 Xcode: 3.2.6 Mail.log ====================== version:1 :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main epoch: in tree: 0 installed: 0 :debug:main dpkg 1.14.29_4 exists in the ports tree :debug:main dpkg 1.14.29_4 is the latest installed :debug:main dpkg 1.14.29_4 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/dpkg :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! dpkg 1.14.29_4 >= dpkg 1.14.29_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.2_2 exists in the ports tree :debug:main gettext 0.18.2_2 is the latest installed :debug:main gettext 0.18.2_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main compiler clang 77 blacklisted because matches {clang < 211.10.1} :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.2_2 >= gettext 0.18.2_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.1.0_0 exists in the ports tree :debug:main expat 2.1.0_0 is the latest installed :debug:main expat 2.1.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_2 exists in the ports tree :debug:main ncurses 5.9_2 is the latest installed :debug:main ncurses 5.9_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.12.4_0 exists in the ports tree :debug:main perl5 5.12.4_0 +perl5_12 is the latest installed :debug:main perl5 5.12.4_0 +perl5_12 is active :debug:main Merging existing variants '+perl5_12' into variants :debug:main new fully merged portvariants: perl5_12 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Executing variant perl5_12 provides perl5_12 :debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.4_1 exists in the ports tree :debug:main perl5.12 5.12.4_1 is the latest installed :debug:main perl5.12 5.12.4_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.10_2 exists in the ports tree :debug:main gdbm 1.10_2 is the latest installed :debug:main gdbm 1.10_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main coreutils 8.21_0 exists in the ports tree :debug:main coreutils 8.21_0 is the latest installed :debug:main coreutils 8.21_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/coreutils :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! coreutils 8.21_0 >= coreutils 8.21_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gmp 5.0.5_0 exists in the ports tree :debug:main gmp 5.0.5_0 is the latest installed :debug:main gmp 5.0.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmp :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gmp 5.0.5_0 >= gmp 5.0.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.7_0 exists in the ports tree :debug:main zlib 1.2.7_0 is the latest installed :debug:main zlib 1.2.7_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0 :debug:main Found Dependency: path: /usr/bin filename: gnutar regex: ^gnutar$ :debug:main gnutar is *not* installed by MacPorts :debug:main Searching for dependency: gnutar :debug:main Didn't find receipt, going to depspec regex for: gnutar :debug:main Found Dependency: path: /usr/bin filename: gnutar regex: ^gnutar$ :debug:main gnutar not installed, soft dependency satisfied :debug:main epoch: in tree: 0 installed: 0 :debug:main xz 5.0.4_0 exists in the ports tree :debug:main xz 5.0.4_0 is the latest installed :debug:main xz 5.0.4_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0 :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :msg:main ---> Computing dependencies for apt:info:main .:debug:main apt has no conflicts :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main Searching for dependency: gmake :debug:main Didn't find receipt, going to depspec regex for: gmake :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main Searching for dependency: dpkg :debug:main Found Dependency: receipt exists for dpkg :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :debug:main Searching for dependency: bash :debug:main Didn't find receipt, going to depspec regex for: bash :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :debug:main Searching for dependency: gettext :debug:main Found Dependency: receipt exists for gettext :msg:main :debug:main Executing org.macports.main (apt) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 502 :debug:main Skipping completed org.macports.archivefetch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Wed Feb 27 16:54:39 GMT 2013 :notice:build ---> Building apt :debug:build Executing org.macports.build (apt) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all :info:build gnumake: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build' :info:build gnumake[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27' :info:build gnumake[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27 /apt-pkg' :info:build gnumake[2]: warning: -jN forced in submake: disabling jobserver mode. :info:build Compiling contrib/md5.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/md5.opic :info:build Compiling contrib/sha1.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/sha1.opic :info:build Compiling contrib/hashes.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/hashes.opic :info:build Compiling contrib/cdromutl.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/cdromutl.opic :info:build contrib/hashes.cc: In member function ‘bool Hashes::AddFD(int, long unsigned int)’: :info:build contrib/hashes.cc:33: error: expected primary-expression before ‘?’ token :info:build contrib/hashes.cc:33: error: expected `:' before ‘)’ token :info:build contrib/hashes.cc:33: error: expected primary-expression before ‘)’ token :info:build contrib/hashes.cc:34: error: expected primary-expression before ‘?’ token :info:build contrib/hashes.cc:34: error: expected `:' before ‘)’ token :info:build contrib/hashes.cc:34: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/hashes.opic] Error 1 :info:build gnumake[2]: *** Waiting for unfinished jobs.... :info:build contrib/md5.cc: In member function ‘bool MD5Summation::AddFD(int, long unsigned int)’: :info:build contrib/md5.cc:302: error: expected primary-expression before ‘?’ token :info:build contrib/md5.cc:302: error: expected `:' before ‘)’ token :info:build contrib/md5.cc:302: error: expected primary-expression before ‘)’ token :info:build contrib/md5.cc:303: error: expected primary-expression before ‘?’ token :info:build contrib/md5.cc:303: error: expected `:' before ‘)’ token :info:build contrib/md5.cc:303: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/md5.opic] Error 1 :info:build contrib/sha1.cc: In member function ‘bool SHA1Summation::AddFD(int, long unsigned int)’: :info:build contrib/sha1.cc:348: error: expected primary-expression before ‘?’ token :info:build contrib/sha1.cc:348: error: expected `:' before ‘)’ token :info:build contrib/sha1.cc:348: error: expected primary-expression before ‘)’ token :info:build contrib/sha1.cc:349: error: expected primary-expression before ‘?’ token :info:build contrib/sha1.cc:349: error: expected `:' before ‘)’ token :info:build contrib/sha1.cc:349: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/sha1.opic] Error 1 :info:build gnumake[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27 /apt-pkg' :info:build gnumake[1]: *** [all] Error 2 :info:build gnumake[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27' :info:build gnumake: *** [all] Error 2 :info:build gnumake: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all :info:build Exit code: 2 :error:build org.macports.build for port apt returned: command execution failed :debug:build Error code: CHILDSTATUS 18599 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: targets not executed for apt: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port apt for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/main.log -- Ticket URL: <https://trac.macports.org/ticket/38227> MacPorts <http://www.macports.org/> Ports system for Mac OS
#38227: apt: build error ------------------------------+----------------------- Reporter: santoscandrea@… | Owner: landonf@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: apt | ------------------------------+----------------------- Changes (by macsforever2000@…): * owner: macports-tickets@… => landonf@… * port: => apt Old description:
OSx: 10.6.8 Xcode: 3.2.6
Mail.log ====================== version:1 :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main epoch: in tree: 0 installed: 0 :debug:main dpkg 1.14.29_4 exists in the ports tree :debug:main dpkg 1.14.29_4 is the latest installed :debug:main dpkg 1.14.29_4 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/dpkg :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! dpkg 1.14.29_4 >= dpkg 1.14.29_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.2_2 exists in the ports tree :debug:main gettext 0.18.2_2 is the latest installed :debug:main gettext 0.18.2_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main compiler clang 77 blacklisted because matches {clang < 211.10.1} :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.2_2 >= gettext 0.18.2_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.1.0_0 exists in the ports tree :debug:main expat 2.1.0_0 is the latest installed :debug:main expat 2.1.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_2 exists in the ports tree :debug:main ncurses 5.9_2 is the latest installed :debug:main ncurses 5.9_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.12.4_0 exists in the ports tree :debug:main perl5 5.12.4_0 +perl5_12 is the latest installed :debug:main perl5 5.12.4_0 +perl5_12 is active :debug:main Merging existing variants '+perl5_12' into variants :debug:main new fully merged portvariants: perl5_12 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Executing variant perl5_12 provides perl5_12 :debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.4_1 exists in the ports tree :debug:main perl5.12 5.12.4_1 is the latest installed :debug:main perl5.12 5.12.4_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.10_2 exists in the ports tree :debug:main gdbm 1.10_2 is the latest installed :debug:main gdbm 1.10_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main coreutils 8.21_0 exists in the ports tree :debug:main coreutils 8.21_0 is the latest installed :debug:main coreutils 8.21_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/coreutils :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! coreutils 8.21_0 >= coreutils 8.21_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gmp 5.0.5_0 exists in the ports tree :debug:main gmp 5.0.5_0 is the latest installed :debug:main gmp 5.0.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmp :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gmp 5.0.5_0 >= gmp 5.0.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.7_0 exists in the ports tree :debug:main zlib 1.2.7_0 is the latest installed :debug:main zlib 1.2.7_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0 :debug:main Found Dependency: path: /usr/bin filename: gnutar regex: ^gnutar$ :debug:main gnutar is *not* installed by MacPorts :debug:main Searching for dependency: gnutar :debug:main Didn't find receipt, going to depspec regex for: gnutar :debug:main Found Dependency: path: /usr/bin filename: gnutar regex: ^gnutar$ :debug:main gnutar not installed, soft dependency satisfied :debug:main epoch: in tree: 0 installed: 0 :debug:main xz 5.0.4_0 exists in the ports tree :debug:main xz 5.0.4_0 is the latest installed :debug:main xz 5.0.4_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0 :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :msg:main ---> Computing dependencies for apt:info:main .:debug:main apt has no conflicts :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main Searching for dependency: gmake :debug:main Didn't find receipt, going to depspec regex for: gmake :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main Searching for dependency: dpkg :debug:main Found Dependency: receipt exists for dpkg :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :debug:main Searching for dependency: bash :debug:main Didn't find receipt, going to depspec regex for: bash :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :debug:main Searching for dependency: gettext :debug:main Found Dependency: receipt exists for gettext :msg:main :debug:main Executing org.macports.main (apt) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 502 :debug:main Skipping completed org.macports.archivefetch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Wed Feb 27 16:54:39 GMT 2013 :notice:build ---> Building apt :debug:build Executing org.macports.build (apt) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all :info:build gnumake: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build' :info:build gnumake[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27' :info:build gnumake[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27 /apt-pkg' :info:build gnumake[2]: warning: -jN forced in submake: disabling jobserver mode. :info:build Compiling contrib/md5.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/md5.opic :info:build Compiling contrib/sha1.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/sha1.opic :info:build Compiling contrib/hashes.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/hashes.opic :info:build Compiling contrib/cdromutl.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/cdromutl.opic :info:build contrib/hashes.cc: In member function ‘bool Hashes::AddFD(int, long unsigned int)’: :info:build contrib/hashes.cc:33: error: expected primary-expression before ‘?’ token :info:build contrib/hashes.cc:33: error: expected `:' before ‘)’ token :info:build contrib/hashes.cc:33: error: expected primary-expression before ‘)’ token :info:build contrib/hashes.cc:34: error: expected primary-expression before ‘?’ token :info:build contrib/hashes.cc:34: error: expected `:' before ‘)’ token :info:build contrib/hashes.cc:34: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/hashes.opic] Error 1 :info:build gnumake[2]: *** Waiting for unfinished jobs.... :info:build contrib/md5.cc: In member function ‘bool MD5Summation::AddFD(int, long unsigned int)’: :info:build contrib/md5.cc:302: error: expected primary-expression before ‘?’ token :info:build contrib/md5.cc:302: error: expected `:' before ‘)’ token :info:build contrib/md5.cc:302: error: expected primary-expression before ‘)’ token :info:build contrib/md5.cc:303: error: expected primary-expression before ‘?’ token :info:build contrib/md5.cc:303: error: expected `:' before ‘)’ token :info:build contrib/md5.cc:303: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/md5.opic] Error 1 :info:build contrib/sha1.cc: In member function ‘bool SHA1Summation::AddFD(int, long unsigned int)’: :info:build contrib/sha1.cc:348: error: expected primary-expression before ‘?’ token :info:build contrib/sha1.cc:348: error: expected `:' before ‘)’ token :info:build contrib/sha1.cc:348: error: expected primary-expression before ‘)’ token :info:build contrib/sha1.cc:349: error: expected primary-expression before ‘?’ token :info:build contrib/sha1.cc:349: error: expected `:' before ‘)’ token :info:build contrib/sha1.cc:349: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/sha1.opic] Error 1 :info:build gnumake[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27 /apt-pkg' :info:build gnumake[1]: *** [all] Error 2 :info:build gnumake[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27' :info:build gnumake: *** [all] Error 2 :info:build gnumake: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all :info:build Exit code: 2 :error:build org.macports.build for port apt returned: command execution failed :debug:build Error code: CHILDSTATUS 18599 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: targets not executed for apt: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port apt for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/main.log
New description: OSx: 10.6.8 Xcode: 3.2.6 Mail.log ====================== {{{ version:1 :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main epoch: in tree: 0 installed: 0 :debug:main dpkg 1.14.29_4 exists in the ports tree :debug:main dpkg 1.14.29_4 is the latest installed :debug:main dpkg 1.14.29_4 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/dpkg :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! dpkg 1.14.29_4 >= dpkg 1.14.29_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.2_2 exists in the ports tree :debug:main gettext 0.18.2_2 is the latest installed :debug:main gettext 0.18.2_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main compiler clang 77 blacklisted because matches {clang < 211.10.1} :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.2_2 >= gettext 0.18.2_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.1.0_0 exists in the ports tree :debug:main expat 2.1.0_0 is the latest installed :debug:main expat 2.1.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_2 exists in the ports tree :debug:main ncurses 5.9_2 is the latest installed :debug:main ncurses 5.9_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.12.4_0 exists in the ports tree :debug:main perl5 5.12.4_0 +perl5_12 is the latest installed :debug:main perl5 5.12.4_0 +perl5_12 is active :debug:main Merging existing variants '+perl5_12' into variants :debug:main new fully merged portvariants: perl5_12 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Executing variant perl5_12 provides perl5_12 :debug:main No need to upgrade! perl5 5.12.4_0 >= perl5 5.12.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.4_1 exists in the ports tree :debug:main perl5.12 5.12.4_1 is the latest installed :debug:main perl5.12 5.12.4_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.12 5.12.4_1 >= perl5.12 5.12.4_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.10_2 exists in the ports tree :debug:main gdbm 1.10_2 is the latest installed :debug:main gdbm 1.10_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! gdbm 1.10_2 >= gdbm 1.10_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main coreutils 8.21_0 exists in the ports tree :debug:main coreutils 8.21_0 is the latest installed :debug:main coreutils 8.21_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/coreutils :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! coreutils 8.21_0 >= coreutils 8.21_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gmp 5.0.5_0 exists in the ports tree :debug:main gmp 5.0.5_0 is the latest installed :debug:main gmp 5.0.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gmp :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gmp 5.0.5_0 >= gmp 5.0.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.7_0 exists in the ports tree :debug:main zlib 1.2.7_0 is the latest installed :debug:main zlib 1.2.7_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0 :debug:main Found Dependency: path: /usr/bin filename: gnutar regex: ^gnutar$ :debug:main gnutar is *not* installed by MacPorts :debug:main Searching for dependency: gnutar :debug:main Didn't find receipt, going to depspec regex for: gnutar :debug:main Found Dependency: path: /usr/bin filename: gnutar regex: ^gnutar$ :debug:main gnutar not installed, soft dependency satisfied :debug:main epoch: in tree: 0 installed: 0 :debug:main xz 5.0.4_0 exists in the ports tree :debug:main xz 5.0.4_0 is the latest installed :debug:main xz 5.0.4_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0 :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :msg:main ---> Computing dependencies for apt:info:main .:debug:main apt has no conflicts :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main Searching for dependency: gmake :debug:main Didn't find receipt, going to depspec regex for: gmake :debug:main Found Dependency: path: /usr/bin filename: gnumake regex: ^gnumake$ :debug:main Searching for dependency: dpkg :debug:main Found Dependency: receipt exists for dpkg :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :debug:main Searching for dependency: bash :debug:main Didn't find receipt, going to depspec regex for: bash :debug:main Found Dependency: path: /bin filename: bash regex: ^bash$ :debug:main Searching for dependency: gettext :debug:main Found Dependency: receipt exists for gettext :msg:main :debug:main Executing org.macports.main (apt) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 502 :debug:main Skipping completed org.macports.archivefetch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (apt) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Wed Feb 27 16:54:39 GMT 2013 :notice:build ---> Building apt :debug:build Executing org.macports.build (apt) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all :info:build gnumake: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build' :info:build gnumake[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27' :info:build gnumake[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27 /apt-pkg' :info:build gnumake[2]: warning: -jN forced in submake: disabling jobserver mode. :info:build Compiling contrib/md5.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/md5.opic :info:build Compiling contrib/sha1.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/sha1.opic :info:build Compiling contrib/hashes.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/hashes.opic :info:build Compiling contrib/cdromutl.cc to /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/cdromutl.opic :info:build contrib/hashes.cc: In member function ‘bool Hashes::AddFD(int, long unsigned int)’: :info:build contrib/hashes.cc:33: error: expected primary-expression before ‘?’ token :info:build contrib/hashes.cc:33: error: expected `:' before ‘)’ token :info:build contrib/hashes.cc:33: error: expected primary-expression before ‘)’ token :info:build contrib/hashes.cc:34: error: expected primary-expression before ‘?’ token :info:build contrib/hashes.cc:34: error: expected `:' before ‘)’ token :info:build contrib/hashes.cc:34: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/hashes.opic] Error 1 :info:build gnumake[2]: *** Waiting for unfinished jobs.... :info:build contrib/md5.cc: In member function ‘bool MD5Summation::AddFD(int, long unsigned int)’: :info:build contrib/md5.cc:302: error: expected primary-expression before ‘?’ token :info:build contrib/md5.cc:302: error: expected `:' before ‘)’ token :info:build contrib/md5.cc:302: error: expected primary-expression before ‘)’ token :info:build contrib/md5.cc:303: error: expected primary-expression before ‘?’ token :info:build contrib/md5.cc:303: error: expected `:' before ‘)’ token :info:build contrib/md5.cc:303: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/md5.opic] Error 1 :info:build contrib/sha1.cc: In member function ‘bool SHA1Summation::AddFD(int, long unsigned int)’: :info:build contrib/sha1.cc:348: error: expected primary-expression before ‘?’ token :info:build contrib/sha1.cc:348: error: expected `:' before ‘)’ token :info:build contrib/sha1.cc:348: error: expected primary-expression before ‘)’ token :info:build contrib/sha1.cc:349: error: expected primary-expression before ‘?’ token :info:build contrib/sha1.cc:349: error: expected `:' before ‘)’ token :info:build contrib/sha1.cc:349: error: expected primary-expression before ‘)’ token :info:build gnumake[2]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build/obj /apt-pkg/sha1.opic] Error 1 :info:build gnumake[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27 /apt-pkg' :info:build gnumake[1]: *** [all] Error 2 :info:build gnumake[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27' :info:build gnumake: *** [all] Error 2 :info:build gnumake: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/work/apt-0.5.27/build" && /usr/bin/gnumake -j2 -w all :info:build Exit code: 2 :error:build org.macports.build for port apt returned: command execution failed :debug:build Error code: CHILDSTATUS 18599 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: targets not executed for apt: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port apt for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_apt/apt/main.log }}} -- Comment: In the future, please use WikiFormatting, fill in the Port field, Cc the port maintainer(s), and attach the main.log instead of pasting the text into the description without formatting. -- Ticket URL: <https://trac.macports.org/ticket/38227#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#38227: apt: build error ------------------------------+----------------------- Reporter: santoscandrea@… | Owner: landonf@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: apt | ------------------------------+----------------------- Comment (by santoscandrea@…): Thanks for letting me know! I am newbie here and I would like your help on this issue. Best regards, Andrea -- Ticket URL: <https://trac.macports.org/ticket/38227#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#38227: apt: build error ------------------------------+----------------------- Reporter: santoscandrea@… | Owner: landonf@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: duplicate | Keywords: Port: apt | ------------------------------+----------------------- Changes (by jmr@…): * status: new => closed * resolution: => duplicate Comment: #34412 -- Ticket URL: <https://trac.macports.org/ticket/38227#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts