[MacPorts] #25931: port install of ufraw interrupted and now hangs
#25931: port install of ufraw interrupted and now hangs -----------------------------------+---------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -----------------------------------+---------------------------------------- I'm a bit confused on how to get my install to resume. My laptop was shut during installation (sudo port install ufraw) and it did not resume.. I interrupted the hung command and now I can not get it to either reinstall or install. clean doesn't help... sudo port -d clean ufraw DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: Executing org.macports.main (ufraw) ---> Cleaning ufraw DEBUG: clean phase started at Mon Aug 2 21:39:02 PDT 2010 DEBUG: Executing org.macports.clean (ufraw) ---> Removing build directory for ufraw DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: No work directory found to remove at /Users/gooch/.macports/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw/work DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw/work DEBUG: Removing directory: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: delete: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw sudo port -d upgrade outdated hangs too: DEBUG: epoch: in tree: 0 installed: 0 DEBUG: iso-codes 3.19_0 exists in the ports tree DEBUG: iso-codes 3.18_0 is the latest installed DEBUG: iso-codes 3.18_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /iso-codes DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18.1.1_2 exists in the ports tree DEBUG: gettext 0.18.1.1_2 is the latest installed DEBUG: gettext 0.18.1.1_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 is the latest installed DEBUG: ncurses 5.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 is the latest installed DEBUG: ncursesw 5.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Starting logging for iso-codes -- Ticket URL: <http://trac.macports.org/ticket/25931> MacPorts <http://www.macports.org/> Ports system for Mac OS
#25931: port install of ufraw interrupted and now hangs -----------------------------------+---------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -----------------------------------+---------------------------------------- Description changed by ryandesign@…: Old description:
I'm a bit confused on how to get my install to resume. My laptop was shut during installation (sudo port install ufraw) and it did not resume.. I interrupted the hung command and now I can not get it to either reinstall or install. clean doesn't help...
sudo port -d clean ufraw DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: Executing org.macports.main (ufraw) ---> Cleaning ufraw DEBUG: clean phase started at Mon Aug 2 21:39:02 PDT 2010 DEBUG: Executing org.macports.clean (ufraw) ---> Removing build directory for ufraw DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: No work directory found to remove at /Users/gooch/.macports/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw/work DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw/work DEBUG: Removing directory: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: delete: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw
sudo port -d upgrade outdated
hangs too:
DEBUG: epoch: in tree: 0 installed: 0 DEBUG: iso-codes 3.19_0 exists in the ports tree DEBUG: iso-codes 3.18_0 is the latest installed DEBUG: iso-codes 3.18_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /iso-codes DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18.1.1_2 exists in the ports tree DEBUG: gettext 0.18.1.1_2 is the latest installed DEBUG: gettext 0.18.1.1_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 is the latest installed DEBUG: ncurses 5.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 is the latest installed DEBUG: ncursesw 5.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Starting logging for iso-codes
New description: I'm a bit confused on how to get my install to resume. My laptop was shut during installation (sudo port install ufraw) and it did not resume.. I interrupted the hung command and now I can not get it to either reinstall or install. clean doesn't help... {{{ sudo port -d clean ufraw DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: Executing org.macports.main (ufraw) ---> Cleaning ufraw DEBUG: clean phase started at Mon Aug 2 21:39:02 PDT 2010 DEBUG: Executing org.macports.clean (ufraw) ---> Removing build directory for ufraw DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: No work directory found to remove at /Users/gooch/.macports/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw/work DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw/work DEBUG: Removing directory: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw DEBUG: delete: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw }}} {{{ sudo port -d upgrade outdated }}} hangs too: {{{ DEBUG: epoch: in tree: 0 installed: 0 DEBUG: iso-codes 3.19_0 exists in the ports tree DEBUG: iso-codes 3.18_0 is the latest installed DEBUG: iso-codes 3.18_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /iso-codes DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18.1.1_2 exists in the ports tree DEBUG: gettext 0.18.1.1_2 is the latest installed DEBUG: gettext 0.18.1.1_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 is the latest installed DEBUG: ncurses 5.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 is the latest installed DEBUG: ncursesw 5.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Starting logging for iso-codes }}} -- -- Ticket URL: <http://trac.macports.org/ticket/25931#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#25931: port install of ufraw interrupted and now hangs -----------------------------------+---------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -----------------------------------+---------------------------------------- Comment(by ryandesign@…): Please use WikiFormatting when pasting shell output so it's legible. The output you showed for "sudo port -d clean ufraw" shows that MacPorts successfully cleaned it; no problem there. Was the output you showed for "sudo port -d upgrade outdated" complete? Did it really end at "Starting logging for iso-codes" or did you cut it off there? If you cut it off there, let it complete; it looks correct so far. If port did hang there, then let's clean iso-codes and try upgrading just that ("sudo port clean iso-codes", "sudo port -d upgrade iso-codes"). -- Ticket URL: <http://trac.macports.org/ticket/25931#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#25931: port install of ufraw interrupted and now hangs -----------------------------------+---------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -----------------------------------+---------------------------------------- Comment(by amy.a.gooch@…): I had pasted everything from my terminal window into the message (sorry about the lack of formating) . I did as suggested and it just hangs there too. (see below) {{{ sudo port clean iso-codes Password: ---> Cleaning iso-codes [Amy-Goochs-Computer-3:/opt/local] gooch% sudo port -d upgrade iso-codes - Hide quoted text - DEBUG: epoch: in tree: 0 installed: 0 DEBUG: iso-codes 3.19_0 exists in the ports tree DEBUG: iso-codes 3.18_0 is the latest installed DEBUG: iso-codes 3.18_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /iso-codes DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18.1.1_2 exists in the ports tree DEBUG: gettext 0.18.1.1_2 is the latest installed DEBUG: gettext 0.18.1.1_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 is the latest installed DEBUG: ncurses 5.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 is the latest installed DEBUG: ncursesw 5.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_devel_iso-codes/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /iso-codes/work DEBUG: Starting logging for iso-codes }}} -- Ticket URL: <http://trac.macports.org/ticket/25931#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#25931: port install of ufraw interrupted and now hangs -----------------------------------+---------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -----------------------------------+---------------------------------------- Comment(by macsforever2000@…): You might have lingering Macports processes. Have you rebooted since the fateful sleep incident? -- Ticket URL: <http://trac.macports.org/ticket/25931#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#25931: port install of ufraw interrupted and now hangs -----------------------------------+---------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -----------------------------------+---------------------------------------- Comment(by amy.a.gooch@…): Should have thought of the reboot.. after that was done, I"m in a "possible infinite loop". the error list is really, really long... how do upload a file to this ticket or do I just dump it all in here? the end of the error is: {{{ DEBUG: too many nested evaluations (infinite loop?) while executing "lshift args" ("catch" arm line 2) invoked from within "switch $arg { catch { set elem [lshift args] if {[llength $args] == 0 || [llength $elem] > 4} { ..." (procedure "try" line 10) invoked from within "try { seek $fd $offset gets $fd line set name [lindex $line 0] set len..." (procedure "mportlookup" line 23) invoked from within "mportlookup $dep_portname" Error: Internal error: port lookup failed: too many nested evaluations (infinite loop?) Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} I had tried to pick off a few of them and installed things like python26, gimp2,texlive, but the later two also resulted in the same "Possible Infinite loop". -- Ticket URL: <http://trac.macports.org/ticket/25931#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#25931: port install of ufraw interrupted and now hangs -----------------------------------+---------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -----------------------------------+---------------------------------------- Comment(by amy.a.gooch@…): I've also tried clean and uninstall -- Ticket URL: <http://trac.macports.org/ticket/25931#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#25931: port install of ufraw interrupted and now hangs -----------------------------------+---------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -----------------------------------+---------------------------------------- Comment(by macsforever2000@…): You need to run selfupdate. This was fixed yesterday. {{{ sudo port selfupdate }}} -- Ticket URL: <http://trac.macports.org/ticket/25931#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS
#25931: port install of ufraw interrupted and now hangs ------------------------------------+--------------------------------------- Reporter: amy.a.gooch@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: invalid | Keywords: Port: | ------------------------------------+--------------------------------------- Changes (by macsforever2000@…): * status: new => closed * resolution: => invalid -- Ticket URL: <http://trac.macports.org/ticket/25931#comment:8> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts