#14730: py25-libxml2 2.6.21_1 fails to build ------------------------------+--------------------------------------------- Reporter: stephan@… | Owner: sfiera@… Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: Port: | ------------------------------+--------------------------------------------- Comment(by ctempleton3@…): Replying to [comment:5 sfiera@…]:

That looks like a very different error.

Do you want me to make a new ticket? Replying to [comment:5 sfiera@…]:

* Can you make sure your version of libxml2/libiconv is up-to-date? (`sudo port selfupdate` and `sudo port upgrade libxml2 libiconv`

{{{ $ port selfupdate Password: MacPorts base version 1.700 installed Downloaded MacPorts base version 1.700 The MacPorts installation is not outdated so it was not updated $ $ port upgrade libiconv libxml2 $ }}} Replying to [comment:5 sfiera@…]:

* Can you try disabling ccache? (I know nothing about it, including how to enable/disable it; all I can say is that it has worked for me without it)

This one was harder than I thought it would be. Apparently, if you build python25 with ccache it wants to use it to build subsequent python software even if ccache is not on the system. I had to eventualy rebuild python25 from source to get it to default back to gcc. (When I uninstalled it and reinstalled it from archive it continued to point to ccache.) That aside I am still having the same problems. See below: {{{ $ port -t install py25-libxml2 Password: ---> Fetching py25-libxml2 ---> Verifying checksum(s) for py25-libxml2 ---> Extracting py25-libxml2 ---> Applying patches to py25-libxml2 ---> Configuring py25-libxml2 ---> Building py25-libxml2 trace: access denied to /opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/os.py (*unknown*) trace: access denied to /opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/os.pyc (*unknown*) trace: access denied to /opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/os.py (*unknown*) trace: access denied to /opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/os.pyc (*unknown*) trace: access denied to /opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5 /lib-dynload/strop.so (*unknown*) trace: access denied to /opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/config/Makefile (*unknown*) trace: access denied to /opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5/pyconfig.h (*unknown*) Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-libxml2/work/libxml2-python-2.6.21" && /opt/local/bin/python2.5 setup.py --no-user-cfg build " returned error 1 Command output: xmlRelaxNGValidityErrorFunc *:2 xmlXPathObjectPtr:22 const htmlEntityDesc *:2 xmlOutputMatchCallback:1 xmlElementContentPtr *:1 xmlStructuredErrorFunc:3 xmlSchematronValidCtxtPtr:2 xmlParserInputBufferCreateFilenameFunc:2 xmlSchemaValType:2 size_t:1 xmlEnumerationPtr:5 xmlSchemaWildcardPtr:1 xmlXIncludeCtxtPtr:4 xmlRelaxNGValidityErrorFunc:2 xmlSAXHandler *:4 ...:1 xmlShellReadlineFunc:1 xmlDict *:1 xmlAutomataPtr:19 xmlParserInputPtr:17 xmlCatalogAllow:2 xmlExpNodePtr:3 xmlElementContent *:1 xmlCharEncodingOutputFunc:1 xmlDictPtr:10 xmlTextWriterPtr:77 const htmlElemDesc *:1 xmlIDPtr:1 xmlSchemaValPtr:13 xmlInputMatchCallback:1 xmlElementTablePtr:2 xmlChar **:15 xmlXPathCompExprPtr:5 xmlTextReaderErrorFunc:1 xmlExternalEntityLoader:2 xmlNotationTablePtr:2 xmlXPathVariableLookupFunc:1 xmlParserNodeInfoPtr:1 xmlExpCtxtPtr:14 xmlPatternPtr:8 xmlC14NIsVisibleCallback:1 xmlDeregisterNodeFunc:2 va_list:1 xmlSchemaTypePtr:9 htmlStatus:1 xmlRegisterNodeFunc:2 xmlAttributeType:2 xmlRefPtr:1 xmlCharEncodingHandler *:4 xmlNotationPtr:3 xmlSaveCtxtPtr:8 xmlRegExecCallbacks:1 xmlNsPtr *:1 xmlLocationSetPtr:6 xmlSchemaSAXPlugPtr:1 xmlModulePtr:4 xmlEnumerationPtr *:2 xmlShellCtxtPtr:10 xlinkNodeDetectFunc:2 xmlRefTablePtr:1 xmlStreamCtxtPtr:4 xmlSchemaValidityErrorFunc *:2 xmlChRangeGroupPtr:1 xmlAttributeTablePtr:2 xmlSchematronParserCtxtPtr:5 xmlCatalogPrefer:1 xmlParserNodeInfoSeqPtr:3 xmlSchematronPtr:2 xmlNodePtr *:2 xmlInputReadCallback:7 char **:5 xmlCharEncoding:13 xmlRegExecCtxtPtr:5 xmlElementContentType:2 void *:85 xmlTextReaderErrorFunc *:1 xmlSAXHandlerPtr *:1 xmlEntityReferenceFunc:1 xmlDocPtr *:1 xmlBufferAllocationScheme:3 xmlSchemaValidityErrorFunc:2 xmlDOMWrapCtxtPtr:5 xmlOutputWriteCallback:2 xmlSchemaFacetPtr:7 xlinkHandlerPtr:2 xmlXPathFuncLookupFunc:1 htmlElemDesc *:3 xmlCharEncodingHandlerPtr:7 xmlCharEncodingInputFunc:1 xmlFeature:1 const xmlParserNodeInfo *:1 xmlNodeSetPtr:32 xmlEntitiesTablePtr:3 xmlIDTablePtr:1 xmlXPathFunction:4 xmlOutputBufferCreateFilenameFunc:2 xmlElementContentPtr:8 xmlElementTypeVal:1 xlinkType:1 xmlGenericErrorFunc *:1 running build running build_py creating build creating build/lib.macosx-10.4-fat-2.5 copying libxml2.py -> build/lib.macosx-10.4-fat-2.5 copying drv_libxml2.py -> build/lib.macosx-10.4-fat-2.5 running build_ext building 'libxml2mod' extension creating build/temp.macosx-10.4-fat-2.5 /usr/bin/gcc-4.0 -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -Wno-long-double -no- cpp-precomp -mno-fused-madd -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -D_REENTRANT=1 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/python2.5 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -c libxml2-py.c -o build/temp.macosx-10.4-fat-2.5/libxml2-py.o /usr/bin/gcc-4.0 -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -Wno-long-double -no- cpp-precomp -mno-fused-madd -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -D_REENTRANT=1 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/python2.5 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -c libxml.c -o build/temp.macosx-10.4-fat-2.5/libxml.o /usr/bin/gcc-4.0 -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -Wno-long-double -no- cpp-precomp -mno-fused-madd -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -D_REENTRANT=1 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/python2.5 -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -c types.c -o build/temp.macosx-10.4-fat-2.5/types.o /usr/bin/gcc-4.0 -arch i386 -arch ppc -isysroot /Developer/SDKs/MacOSX10.4u.sdk -L/opt/local/lib -bundle -undefined dynamic_lookup -L/opt/local/lib build/temp.macosx-10.4-fat-2.5/libxml2-py.o build/temp.macosx-10.4-fat-2.5/libxml.o build/temp.macosx-10.4-fat-2.5/types.o -L/opt/local/lib -lxml2 -lm -lz -o build/lib.macosx-10.4-fat-2.5/libxml2mod.so /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: for architecture i386 /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libiconv.2.dylib referenced from: /opt/local/lib/libxml2.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) /usr/libexec/gcc/i686-apple-darwin8/4.0.1/ld: Undefined symbols: _libiconv referenced from libxml2 expected to be defined in /opt/local/lib/libiconv.2.dylib _libiconv_close referenced from libxml2 expected to be defined in /opt/local/lib/libiconv.2.dylib _libiconv_open referenced from libxml2 expected to be defined in /opt/local/lib/libiconv.2.dylib collect2: ld returned 1 exit status /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: for architecture ppc /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: warning can't open dynamic library: /Developer/SDKs/MacOSX10.4u.sdk/opt/local/lib/libiconv.2.dylib referenced from: /opt/local/lib/libxml2.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: Undefined symbols: _libiconv referenced from libxml2 expected to be defined in /opt/local/lib/libiconv.2.dylib _libiconv_close referenced from libxml2 expected to be defined in /opt/local/lib/libiconv.2.dylib _libiconv_open referenced from libxml2 expected to be defined in /opt/local/lib/libiconv.2.dylib collect2: ld returned 1 exit status lipo: can't open input file: /var/tmp//ccnuH9aM.out (No such file or directory) error: command '/usr/bin/gcc-4.0' failed with exit status 1 Error: Status 1 encountered during processing. $ }}} What is the next thing I should do to try to fix this? Thanks, - Charles -- Ticket URL: <http://trac.macports.org/ticket/14730#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS