[MacPorts] #46798: DV module, QImage, Title module disabled
#46798: DV module, QImage, Title module disabled --------------------------------+-------------------------------- Reporter: hemant_verma2000@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: --------------------------------+-------------------------------- Hi, I recently installed kdenlive on OS X Yesomite 10.10.2. It installed successfully. However, DV module, QImage and Title modules are disabled in the config wizard and I believe, because of that I'm facing the following issues on the "Add title" window: 1. 'Ok' button is always disabled. Only 'Cancel' is enabled. So I can't add a title clip. 2. When I click on colour section, the colour palette doesn't appear. melt: 0.9.2 Qt: 4.8.6 KDE Development Platform: 4.14.3 kde4-config: 1.0 Anyone else has faced similar issues? Thanks -- Ticket URL: <https://trac.macports.org/ticket/46798> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------- Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: kdenlive | ---------------------------------+------------------- Changes (by ryandesign@…): * owner: macports-tickets@… => mk@… * port: => kdenlive -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:1> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------- Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: kdenlive | ---------------------------------+------------------- Comment (by mk@…): Do you mean with "Add title" window actually the "Title Clip" window (which can be reached through "Add title clip")? In there at least I do see an enabled 'OK' button! Well, but there is no colour selection, so I conclude that I am not checking at the correct place. Please give more information how to reproduce what you've found. (I have only very basic knowledge of kdenlive's workflows!) -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:2> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------- Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: kdenlive | ---------------------------------+------------------- Comment (by jeff@…): I can confirm the original poster's experience: In yosemite 10.10.2, I just installed, via MacPorts, Kdenlive version 0.9.10 using KDE Development Platform 4.14.3. (A year ago or so, I had installed and then uninstalled Kdenlive. I don't know if that might have any effect.) I followed the procedure described at https://kdenlive.org /download-mac. When I launched Kdenlive, the config wizard appeared. Under Installed modules, it reports missing or disabled DV module (libdv), Image module, and Title module. Project > Add Title Clip opens the Title Clip window, but the OK button is disabled, and I've not found any way to enable it. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:3> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive | ---------------------------------+------------------ Changes (by mk@…): * version: 2.3.3 => Comment: OK, herewith I can verify that after a rebuild of the application on 10.9.5 I DO see the same symptoms. :( I have no idea how to fix this and I suggest to contact upstream for further advice. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:4> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive | ---------------------------------+------------------ Comment (by billy@…): confirmed on a clean install of macports and kdenlive. The kdenlive board reports the issue being a broken (misconfigured) MLT build, missing QImage and kdenlivetitle modules. (see https://kdenlive.org/forum/adding-title- clip-ok-button-greyed-out-cant-add ) port install libdv and port install mlt both report all is well. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:5> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive, mlt | ---------------------------------+------------------ Changes (by mk@…): * cc: dan@… (added) * port: kdenlive => kdenlive, mlt Comment: Replying to [comment:5 billy@…]:
... missing QImage and kdenlivetitle modules. (see https://kdenlive.org/forum/adding-title-clip-ok-button-greyed-out-cant-add )
yes, indeed, those are missing! Dan, do you have a clue what regarding MLT? Are you still maintaining this port? -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:6> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive, mlt | ---------------------------------+------------------ Comment (by dan@…): Yes, I am still maintaining MLT port, but not kdenlive. The DV module is not required for Kdenlive even though it has a check for it; I don't know why. DV module is very rarely needed. While MLT does not have a hard dependency on Qt, it is pretty needed by Kdenlive. MLT portfile change r72609, removed the qt4-mac dependency and added the qt4 PortGroup. I think that adds the dependency in a different way. If that does not work anymore, then I do not know why. Is the problem that the dependency is not existing and qt4 not installing before mlt? It will take me a while to update macports on my system to test this against something current. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:7> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive, mlt | ---------------------------------+------------------ Comment (by dan@…): I see the problem. qt_libs_dir needs to be changed to qt_frameworks_dir, but I am having trouble getting port to read my local Portfile changes (after running portindex) in order to fully test this. I don't know why, and frankly I am getting tired of trying to figure out why. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:8> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive, mlt | ---------------------------------+------------------ Comment (by mk@…): Replying to [comment:8 dan@…]:
qt_libs_dir needs to be changed to qt_frameworks_dir
OK, I will check that out and report back. Thanks for caring, Dan! :-D -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:9> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive, mlt | ---------------------------------+------------------ Comment (by dan@…): After giving up on my local ports Portfile, I edited the Portfile in the synced tree, but changing qt_libs_dir to qt_frameworks_dir did not work. Neither did removing --qimage-libdir and --qimage-includedir to rely upon pkg-config. Meanwhile, both approaches are working for me at the command line outside of MacPorts (cd ~/src/mlt; ./configure... against macports- installed dependencies). Still trying to figure this out. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:10> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive, mlt | ---------------------------------+------------------ Comment (by dan@…): I solved this and attached a patch for the mlt Portfile. Not only is qt_frameworks_dir needed, but the name of the MLT module changed from qimage to qt in this version of MLT, which required changing the name of the configure args. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:11> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+------------------ Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: kdenlive, mlt | ---------------------------------+------------------ Comment (by dan@…): Also, the DV module in MLT is deprecated and no longer available as part of the normal MLT build process. Like I said, it is not needed if you have the avformat (ffmpeg) module. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:12> MacPorts <https://www.macports.org/> Ports system for OS X
#46798: kdenlive: DV module, QImage, Title module disabled ---------------------------------+-------------------- Reporter: hemant_verma2000@… | Owner: mk@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: Resolution: fixed | Keywords: Port: kdenlive, mlt | ---------------------------------+-------------------- Changes (by mk@…): * status: new => closed * resolution: => fixed Comment: Thanks, Dan, I've committed your mlt patch in #47513. -- Ticket URL: <https://trac.macports.org/ticket/46798#comment:13> MacPorts <https://www.macports.org/> Ports system for OS X
participants (1)
-
MacPorts