#29804: py27-numpy: non-matching file appears to be HTML ------------------------------------+--------------------------------------- Reporter: tun.buynsell@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: py27-numpy ------------------------------------+--------------------------------------- I am trying to install py-27 numpy on my macbook pro running 10.6.7 (Snow Leopard Mac OS) by using: {{{ sudo port install py27-numpy }}} It says that: The non-matching file appears to be HTML. See this page for possible reasons Here's the whole main.log for your enjoyment: {{{ version:1 :debug:main epoch: in tree: 2 installed: 2 :debug:main python27 2.7.1_3 exists in the ports tree :debug:main python27 2.7.1_3 +universal is the latest installed :debug:main python27 2.7.1_3 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! python27 2.7.1_3 >= python27 2.7.1_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 +universal is the latest installed :debug:main gettext 0.18.1.1_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.13.1_0 exists in the ports tree :debug:main libiconv 1.13.1_0 +universal is the latest installed :debug:main libiconv 1.13.1_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_0 exists in the ports tree :debug:main ncurses 5.9_0 +universal is the latest installed :debug:main ncurses 5.9_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 +universal is the latest installed :debug:main expat 2.0.1_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.5_0 exists in the ports tree :debug:main zlib 1.2.5_0 +universal is the latest installed :debug:main zlib 1.2.5_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0d_0 exists in the ports tree :debug:main openssl 1.0.0d_0 +universal is the latest installed :debug:main openssl 1.0.0d_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.6_0 exists in the ports tree :debug:main sqlite3 3.7.6_0 +universal is the latest installed :debug:main sqlite3 3.7.6_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main readline 6.2.000_0 exists in the ports tree :debug:main readline 6.2.000_0 +universal is the latest installed :debug:main readline 6.2.000_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main db46 4.6.21_6 exists in the ports tree :debug:main db46 4.6.21_6 +universal is the latest installed :debug:main db46 4.6.21_6 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.8.3_3 exists in the ports tree :debug:main gdbm 1.8.3_3 +universal is the latest installed :debug:main gdbm 1.8.3_3 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 +universal is the latest installed :debug:main bzip2 1.0.6_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main python_select 0.3_1 exists in the ports tree :debug:main python_select 0.3_1 is the latest installed :debug:main python_select 0.3_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main Requested variant universal is not provided by port python_select. :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main fftw-3 3.2.2_0 exists in the ports tree :debug:main fftw-3 3.2.2_0 +universal is the latest installed :debug:main fftw-3 3.2.2_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main py27-nose 1.0.0_0 exists in the ports tree :debug:main py27-nose 1.0.0_0 is the latest installed :debug:main py27-nose 1.0.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-nose :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl :debug:main only one arch supported, so not adding the default universal variant :debug:main Requested variant universal is not provided by port py27-nose. :debug:main No need to upgrade! py27-nose 1.0.0_0 >= py27-nose 1.0.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main py27-distribute 0.6.19_0 exists in the ports tree :debug:main py27-distribute 0.6.19_0 +universal is the latest installed :debug:main py27-distribute 0.6.19_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-distribute :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! py27-distribute 0.6.19_0 >= py27-distribute 0.6.19_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main gcc44 4.4.6_0 exists in the ports tree :debug:main gcc44 4.4.6_0 +universal is the latest installed :debug:main gcc44 4.4.6_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc44 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gcc44 4.4.6_0 >= gcc44 4.4.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gmp 5.0.1_1 exists in the ports tree :debug:main gmp 5.0.1_1 +universal is the latest installed :debug:main gmp 5.0.1_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gmp 5.0.1_1 >= gmp 5.0.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main mpfr 3.0.1-p3_0 exists in the ports tree :debug:main mpfr 3.0.1-p3_0 +universal is the latest installed :debug:main mpfr 3.0.1-p3_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! mpfr 3.0.1-p3_0 >= mpfr 3.0.1-p3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gcc_select 0.1_5 exists in the ports tree :debug:main gcc_select 0.1_5 is the latest installed :debug:main gcc_select 0.1_5 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/gcc_select :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main Requested variant universal is not provided by port gcc_select. :debug:main No need to upgrade! gcc_select 0.1_5 >= gcc_select 0.1_5 :debug:main epoch: in tree: 0 installed: 0 :debug:main atlas 3.9.37_0 exists in the ports tree :debug:main atlas 3.9.37_0 +gcc44+universal is the latest installed :debug:main atlas 3.9.37_0 +gcc44+universal is active :debug:main Merging existing variants '+gcc44+universal' into variants :debug:main new fully merged portvariants: universal + gcc44 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main Executing variant gcc44 provides gcc44 :debug:main No need to upgrade! atlas 3.9.37_0 >= atlas 3.9.37_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gzip 1.4_0 exists in the ports tree :debug:main gzip 1.4_0 +universal is the latest installed :debug:main gzip 1.4_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gzip 1.4_0 >= gzip 1.4_0 :msg:main ---> Computing dependencies for py27-numpy:info:main .:debug:main Searching for dependency: python27 :debug:main Found Dependency: receipt exists for python27 :debug:main Searching for dependency: fftw-3 :debug:main Found Dependency: receipt exists for fftw-3 :debug:main Searching for dependency: py27-nose :debug:main Found Dependency: receipt exists for py27-nose :debug:main Searching for dependency: gcc44 :debug:main Found Dependency: receipt exists for gcc44 :debug:main Searching for dependency: atlas :debug:main Found Dependency: receipt exists for atlas :msg:main :debug:main Executing org.macports.main (py27-numpy) :debug:main Skipping completed org.macports.fetch (py27-numpy) :msg:main ---> Verifying checksum(s) for py27-numpy :debug:checksum checksum phase started at Sun Jun 12 21:39:08 EDT 2011 :debug:checksum Executing org.macports.checksum (py27-numpy) :info:checksum ---> Checksumming numpy-1.6.0.tar.gz :error:checksum Checksum (md5) mismatch for numpy-1.6.0.tar.gz :info:checksum Portfile checksum: numpy-1.6.0.tar.gz md5 e0993c74cb8e83292e560eac1a9be8e9 :info:checksum Distfile checksum: numpy-1.6.0.tar.gz md5 ebf87808253b9892ef15bdfdbd1b7203 :error:checksum Checksum (sha1) mismatch for numpy-1.6.0.tar.gz :info:checksum Portfile checksum: numpy-1.6.0.tar.gz sha1 0692acfb5cdc55ca251aa2b950e321a662810c36 :info:checksum Distfile checksum: numpy-1.6.0.tar.gz sha1 50e024777cb712ea0aa45aa7dac2e310d9e539b6 :error:checksum Checksum (rmd160) mismatch for numpy-1.6.0.tar.gz :info:checksum Portfile checksum: numpy-1.6.0.tar.gz rmd160 29bee854e1436e0baad46150606d7a0d2d80ac61 :info:checksum Distfile checksum: numpy-1.6.0.tar.gz rmd160 dfd0eef6234b07338388bb47f43fbf90d259ab48 :info:checksum The correct checksum line may be: :info:checksum checksums md5 ebf87808253b9892ef15bdfdbd1b7203 \ sha1 50e024777cb712ea0aa45aa7dac2e310d9e539b6 \ rmd160 dfd0eef6234b07338388bb47f43fbf90d259ab48 :msg:checksum *** :msg:checksum The non-matching file appears to be HTML. See this page for possible reasons :msg:checksum for the checksum mismatch: :msg:checksum <http://trac.macports.org/wiki/MisbehavingServers> :msg:checksum *** :error:checksum Target org.macports.checksum returned: Unable to verify file checksums :debug:checksum Backtrace: Unable to verify file checksums while executing "$procedure $targetname" :info:checksum Warning: the following items did not execute (for py27-numpy): org.macports.activate org.macports.checksum org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:checksum Log for py27-numpy is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py27-numpy/main.log }}} What should I do next? -- Ticket URL: <https://trac.macports.org/ticket/29804> MacPorts <http://www.macports.org/> Ports system for Mac OS