[MacPorts] #21771: libsdl_gfx build failure under xcode 3.2
#21771: libsdl_gfx build failure under xcode 3.2 ----------------------------------+----------------------------------------- Reporter: chrisg@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: libsdl_gfx xcode 3.2 | Port: libsdl_gfx ----------------------------------+----------------------------------------- the build fails trying to build SDL_rotozoom.c I've attached the full build output in the file. SDL_rotozoom.c: In function 'transformSurfaceY': SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'rotozoomSurfaceXY': SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'zoomSurface': SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'shrinkSurface': SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named 'colorkey' -- Ticket URL: <http://trac.macports.org/ticket/21771> MacPorts <http://www.macports.org/> Ports system for Mac OS
#21771: libsdl_gfx build failure under xcode 3.2 ----------------------------------+----------------------------------------- Reporter: chrisg@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: libsdl_gfx xcode 3.2 | Port: libsdl_gfx ----------------------------------+----------------------------------------- Comment(by chrisg@…): I was unaware of the debug switch to port. Since I found it I attempted a rebuild and the following is the output. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl_gfx DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl_gfx DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libsdl_gfx. DEBUG: Requested variant i386 is not provided by port libsdl_gfx. DEBUG: Requested variant macosx is not provided by port libsdl_gfx. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13_0 exists in the ports tree DEBUG: libiconv 1.13_0 is the latest installed DEBUG: libiconv 1.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6a_0 exists in the ports tree DEBUG: libtool 2.2.6a_0 is the latest installed DEBUG: libtool 2.2.6a_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11_0 exists in the ports tree DEBUG: automake 1.11_0 is the latest installed DEBUG: automake 1.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.64_2 exists in the ports tree DEBUG: autoconf 2.64_2 is the latest installed DEBUG: autoconf 2.64_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 is the latest installed DEBUG: m4 1.4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.36.4_1 exists in the ports tree DEBUG: help2man 1.36.4_1 is the latest installed DEBUG: help2man 1.36.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree DEBUG: p5-locale-gettext 1.05_0 is the latest installed DEBUG: p5-locale-gettext 1.05_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1 DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2 DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0 DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0 ---> Computing dependencies for libsdl_gfx DEBUG: Searching for dependency: libsdl DEBUG: Didn't find receipt, going to depspec regex for: libsdl DEBUG: Found Dependency: path: /opt/local/lib/pkgconfig filename: sdl.pc regex: ^sdl.pc$ DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: libtool DEBUG: Found Dependency: receipt exists for libtool DEBUG: Executing org.macports.main (libsdl_gfx) DEBUG: Skipping completed org.macports.fetch (libsdl_gfx) DEBUG: Skipping completed org.macports.checksum (libsdl_gfx) DEBUG: Skipping completed org.macports.extract (libsdl_gfx) DEBUG: Skipping completed org.macports.patch (libsdl_gfx) DEBUG: Skipping completed org.macports.configure (libsdl_gfx) ---> Building libsdl_gfx DEBUG: Executing org.macports.build (libsdl_gfx) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl_gfx/work/SDL_gfx-2.0.20" && /usr/bin/make -j2 all LIBTOOL=glibtool' glibtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c -o SDL_rotozoom.lo SDL_rotozoom.c glibtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c -o SDL_imageFilter.lo SDL_imageFilter.c glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c SDL_rotozoom.c -fno-common -DPIC -o .libs/SDL_rotozoom.o glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c SDL_imageFilter.c -fno-common -DPIC -o .libs/SDL_imageFilter.o SDL_rotozoom.c: In function 'transformSurfaceY': SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'rotozoomSurfaceXY': SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'zoomSurface': SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'shrinkSurface': SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named 'colorkey' make: *** [SDL_rotozoom.lo] Error 1 make: *** Waiting for unfinished jobs.... glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c SDL_imageFilter.c -o SDL_imageFilter.o >/dev/null 2>&1 mv -f .deps/SDL_imageFilter.Tpo .deps/SDL_imageFilter.Plo Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl_gfx/work/SDL_gfx-2.0.20" && /usr/bin/make -j2 all LIBTOOL=glibtool " returned error 2 Command output: glibtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c -o SDL_rotozoom.lo SDL_rotozoom.c glibtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c -o SDL_imageFilter.lo SDL_imageFilter.c glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c SDL_rotozoom.c -fno-common -DPIC -o .libs/SDL_rotozoom.o glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c SDL_imageFilter.c -fno-common -DPIC -o .libs/SDL_imageFilter.o SDL_rotozoom.c: In function 'transformSurfaceY': SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'rotozoomSurfaceXY': SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'zoomSurface': SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'shrinkSurface': SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named 'colorkey' make: *** [SDL_rotozoom.lo] Error 1 make: *** Waiting for unfinished jobs.... glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c SDL_imageFilter.c -o SDL_imageFilter.o >/dev/null 2>&1 mv -f .deps/SDL_imageFilter.Tpo .deps/SDL_imageFilter.Plo DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl_gfx/work/SDL_gfx-2.0.20" && /usr/bin/make -j2 all LIBTOOL=glibtool " returned error 2 Command output: glibtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c -o SDL_rotozoom.lo SDL_rotozoom.c glibtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c -o SDL_imageFilter.lo SDL_imageFilter.c glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c SDL_rotozoom.c -fno-common -DPIC -o .libs/SDL_rotozoom.o glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c SDL_imageFilter.c -fno-common -DPIC -o .libs/SDL_imageFilter.o SDL_rotozoom.c: In function 'transformSurfaceY': SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'rotozoomSurfaceXY': SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'zoomSurface': SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'shrinkSurface': SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named 'colorkey' make: *** [SDL_rotozoom.lo] Error 1 make: *** Waiting for unfinished jobs.... glibtool: compile: /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c SDL_imageFilter.c -o SDL_imageFilter.o >/dev/null 2>&1 mv -f .deps/SDL_imageFilter.Tpo .deps/SDL_imageFilter.Plo while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for libsdl_gfx): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/21771#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#21771: libsdl_gfx build failure under xcode 3.2 ---------------------------+------------------------------------------------ Reporter: chrisg@… | Owner: mww@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: snowleopard | Port: libsdl_gfx ---------------------------+------------------------------------------------ Changes (by blb@…): * keywords: libsdl_gfx xcode 3.2 => snowleopard * owner: macports-tickets@… => mww@… Old description:
the build fails trying to build SDL_rotozoom.c I've attached the full build output in the file.
SDL_rotozoom.c: In function 'transformSurfaceY': SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'rotozoomSurfaceXY': SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'zoomSurface': SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'shrinkSurface': SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named 'colorkey'
New description: the build fails trying to build SDL_rotozoom.c I've attached the full build output in the file. {{{ SDL_rotozoom.c: In function 'transformSurfaceY': SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'rotozoomSurfaceXY': SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'zoomSurface': SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named 'colorkey' SDL_rotozoom.c: In function 'shrinkSurface': SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named 'colorkey' }}} -- -- Ticket URL: <http://trac.macports.org/ticket/21771#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#21771: libsdl_gfx build failure under xcode 3.2 ---------------------------+------------------------------------------------ Reporter: chrisg@… | Owner: mww@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: snowleopard | Port: libsdl_gfx ---------------------------+------------------------------------------------ Comment(by jmr@…): This is probably happening because you are using libsdl-devel instead of libsdl and libsdl_gfx is not yet compatible with SDL 1.3. -- Ticket URL: <http://trac.macports.org/ticket/21771#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#21771: libsdl_gfx build failure under xcode 3.2 ---------------------------+------------------------------------------------ Reporter: chrisg@… | Owner: mww@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: snowleopard | Port: libsdl_gfx ---------------------------+------------------------------------------------ Comment(by chrisg@…): Replying to [comment:3 jmr@…]:
This is probably happening because you are using libsdl-devel instead of libsdl and libsdl_gfx is not yet compatible with SDL 1.3.
using libsdl instead of libsdl-devel fixes the problem. thank you. -- Ticket URL: <http://trac.macports.org/ticket/21771#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#21771: libsdl_gfx build failure under xcode 3.2 ---------------------------+------------------------------------------------ Reporter: chrisg@… | Owner: mww@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: snowleopard | Port: libsdl_gfx ---------------------------+------------------------------------------------ Comment(by chrisg@…): I would close this now except I cannot figure out how to do so. -- Ticket URL: <http://trac.macports.org/ticket/21771#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#21771: libsdl_gfx build failure under xcode 3.2 ----------------------------+----------------------------------------------- Reporter: chrisg@… | Owner: mww@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Resolution: invalid | Keywords: snowleopard Port: libsdl_gfx | ----------------------------+----------------------------------------------- Changes (by macsforever2000@…): * status: new => closed * resolution: => invalid -- Ticket URL: <http://trac.macports.org/ticket/21771#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#21771: libsdl_gfx build failure with libsdl-devel installed ----------------------------+----------------------------------------------- Reporter: chrisg@… | Owner: mww@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Resolution: invalid | Keywords: Port: libsdl_gfx | ----------------------------+----------------------------------------------- Changes (by jmr@…): * keywords: snowleopard => -- Ticket URL: <http://trac.macports.org/ticket/21771#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts