[MacPorts] #31704: Install of mp4v2 failed: "Error: Status 1 encountered during processing"
#31704: Install of mp4v2 failed: "Error: Status 1 encountered during processing" ---------------------------------------+------------------------------------ Reporter: jens.is.located@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: ---------------------------------------+------------------------------------ Hi, mp4v2 installation failed with the following error message. See log file content below! ======================================
sudo port install mp4v2 ---> Computing dependencies for mp4v2 ---> Building mp4v2 Error: Target org.macports.build returned: shell command failed (see log for details) Log for mp4v2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> ======================================
version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main help2man 1.40.4_1 exists in the ports tree :debug:main help2man 1.40.4_1 +universal is the latest installed :debug:main help2man 1.40.4_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.3_2 exists in the ports tree :debug:main perl5.12 5.12.3_2 is the latest installed :debug:main perl5.12 5.12.3_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.9.1_0 exists in the ports tree :debug:main gdbm 1.9.1_0 +universal is the latest installed :debug:main gdbm 1.9.1_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree :debug:main p5.12-locale-gettext 1.50.0_6 +universal is the latest installed :debug:main p5.12-locale-gettext 1.50.0_6 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -locale-gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for livecheck.version :debug:main Re-registering default for configure.universal_args :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12 -locale-gettext 1.50.0_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 +universal is the latest installed :debug:main gettext 0.18.1.1_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 +universal is the latest installed :debug:main libiconv 1.14_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 +universal is the latest installed :debug:main ncurses 5.9_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 +universal is the latest installed :debug:main expat 2.0.1_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :msg:main ---> Computing dependencies for mp4v2:info:main .:debug:main Searching for dependency: help2man :debug:main Found Dependency: receipt exists for help2man :msg:main :debug:main Executing org.macports.main (mp4v2) :debug:main Skipping completed org.macports.archivefetch (mp4v2) :debug:main Skipping completed org.macports.fetch (mp4v2) :debug:main Skipping completed org.macports.checksum (mp4v2) :debug:main Skipping completed org.macports.extract (mp4v2) :debug:main Skipping completed org.macports.patch (mp4v2) :debug:main Skipping completed org.macports.configure (mp4v2) :debug:build build phase started at Fri Oct 21 20:49:00 CEST 2011 :notice:build ---> Building mp4v2 :debug:build Executing org.macports.build (mp4v2) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1' :info:build /bin/sh ./libtool --tag=CXX --mode=compile /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c -o src/bmff/typebmff.lo src/bmff/typebmff.cpp :info:build /bin/sh ./libtool --tag=CXX --mode=compile /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c -o src/itmf/type.lo src/itmf/type.cpp :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c src/itmf/type.cpp -fno-common -DPIC -o src/itmf/.libs/type.o :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c src/bmff/typebmff.cpp -fno-common -DPIC -o src/bmff/.libs/typebmff.o :info:build src/itmf/type.cpp:39:43: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::BasicType, 255>' :info:build const EnumBasicType::Entry EnumBasicType::data[] = { :info:build ~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:67:43: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::GenreType, 0>' :info:build const EnumGenreType::Entry EnumGenreType::data[] = { :info:build ~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:203:41: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::StikType, 255>' :info:build const EnumStikType::Entry EnumStikType::data[] = { :info:build ~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:219:47: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::AccountType, 255>' :info:build const EnumAccountType::Entry EnumAccountType::data[] = { :info:build ~~~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:229:47: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::CountryCode, 0>' :info:build const EnumCountryCode::Entry EnumCountryCode::data[] = { :info:build ~~~~~~~~~~~~~~~~~^ :info:build src/bmff/typebmff.cpp:38:49: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::bmff::LanguageCode, 0>' :info:build const EnumLanguageCode::Entry EnumLanguageCode::data[] = { :info:build ~~~~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:259:51: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::ContentRating, 255>' :info:build const EnumContentRating::Entry EnumContentRating::data[] = { :info:build ~~~~~~~~~~~~~~~~~~~^ :info:build 1 error generated. :info:build make: *** [src/bmff/typebmff.lo] Error 1 :info:build make: *** Waiting for unfinished jobs.... :info:build 6 errors generated. :info:build make: *** [src/itmf/type.lo] Error 1 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for mp4v2): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for mp4v2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log -- Ticket URL: <https://trac.macports.org/ticket/31704> MacPorts <http://www.macports.org/> Ports system for Mac OS
#31704: Install of mp4v2 failed: "Error: Status 1 encountered during processing" ----------------------------------------+----------------------------------- Reporter: jens.is.located@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Resolution: duplicate | Keywords: Port: mp4v2 | ----------------------------------------+----------------------------------- Changes (by ryandesign@…): * status: new => closed * priority: High => Normal * resolution: => duplicate * port: => mp4v2 Old description:
Hi,
mp4v2 installation failed with the following error message. See log file content below!
======================================
sudo port install mp4v2 ---> Computing dependencies for mp4v2 ---> Building mp4v2 Error: Target org.macports.build returned: shell command failed (see log for details) Log for mp4v2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> ======================================
version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main help2man 1.40.4_1 exists in the ports tree :debug:main help2man 1.40.4_1 +universal is the latest installed :debug:main help2man 1.40.4_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.3_2 exists in the ports tree :debug:main perl5.12 5.12.3_2 is the latest installed :debug:main perl5.12 5.12.3_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.9.1_0 exists in the ports tree :debug:main gdbm 1.9.1_0 +universal is the latest installed :debug:main gdbm 1.9.1_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree :debug:main p5.12-locale-gettext 1.50.0_6 +universal is the latest installed :debug:main p5.12-locale-gettext 1.50.0_6 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -locale-gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for livecheck.version :debug:main Re-registering default for configure.universal_args :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12 -locale-gettext 1.50.0_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 +universal is the latest installed :debug:main gettext 0.18.1.1_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 +universal is the latest installed :debug:main libiconv 1.14_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 +universal is the latest installed :debug:main ncurses 5.9_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 +universal is the latest installed :debug:main expat 2.0.1_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :msg:main ---> Computing dependencies for mp4v2:info:main .:debug:main Searching for dependency: help2man :debug:main Found Dependency: receipt exists for help2man :msg:main :debug:main Executing org.macports.main (mp4v2) :debug:main Skipping completed org.macports.archivefetch (mp4v2) :debug:main Skipping completed org.macports.fetch (mp4v2) :debug:main Skipping completed org.macports.checksum (mp4v2) :debug:main Skipping completed org.macports.extract (mp4v2) :debug:main Skipping completed org.macports.patch (mp4v2) :debug:main Skipping completed org.macports.configure (mp4v2) :debug:build build phase started at Fri Oct 21 20:49:00 CEST 2011 :notice:build ---> Building mp4v2 :debug:build Executing org.macports.build (mp4v2) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1' :info:build /bin/sh ./libtool --tag=CXX --mode=compile /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c -o src/bmff/typebmff.lo src/bmff/typebmff.cpp :info:build /bin/sh ./libtool --tag=CXX --mode=compile /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c -o src/itmf/type.lo src/itmf/type.cpp :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c src/itmf/type.cpp -fno-common -DPIC -o src/itmf/.libs/type.o :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c src/bmff/typebmff.cpp -fno-common -DPIC -o src/bmff/.libs/typebmff.o :info:build src/itmf/type.cpp:39:43: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::BasicType, 255>' :info:build const EnumBasicType::Entry EnumBasicType::data[] = { :info:build ~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:67:43: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::GenreType, 0>' :info:build const EnumGenreType::Entry EnumGenreType::data[] = { :info:build ~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:203:41: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::StikType, 255>' :info:build const EnumStikType::Entry EnumStikType::data[] = { :info:build ~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:219:47: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::AccountType, 255>' :info:build const EnumAccountType::Entry EnumAccountType::data[] = { :info:build ~~~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:229:47: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::CountryCode, 0>' :info:build const EnumCountryCode::Entry EnumCountryCode::data[] = { :info:build ~~~~~~~~~~~~~~~~~^ :info:build src/bmff/typebmff.cpp:38:49: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::bmff::LanguageCode, 0>' :info:build const EnumLanguageCode::Entry EnumLanguageCode::data[] = { :info:build ~~~~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:259:51: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::ContentRating, 255>' :info:build const EnumContentRating::Entry EnumContentRating::data[] = { :info:build ~~~~~~~~~~~~~~~~~~~^ :info:build 1 error generated. :info:build make: *** [src/bmff/typebmff.lo] Error 1 :info:build make: *** Waiting for unfinished jobs.... :info:build 6 errors generated. :info:build make: *** [src/itmf/type.lo] Error 1 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for mp4v2): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for mp4v2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log
New description: Hi, mp4v2 installation failed with the following error message. See log file content below! {{{
sudo port install mp4v2 ---> Computing dependencies for mp4v2 ---> Building mp4v2 Error: Target org.macports.build returned: shell command failed (see log for details) Log for mp4v2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}}
{{{ version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main help2man 1.40.4_1 exists in the ports tree :debug:main help2man 1.40.4_1 +universal is the latest installed :debug:main help2man 1.40.4_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.3_2 exists in the ports tree :debug:main perl5.12 5.12.3_2 is the latest installed :debug:main perl5.12 5.12.3_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.9.1_0 exists in the ports tree :debug:main gdbm 1.9.1_0 +universal is the latest installed :debug:main gdbm 1.9.1_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree :debug:main p5.12-locale-gettext 1.50.0_6 +universal is the latest installed :debug:main p5.12-locale-gettext 1.50.0_6 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -locale-gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for livecheck.version :debug:main Re-registering default for configure.universal_args :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12 -locale-gettext 1.50.0_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 +universal is the latest installed :debug:main gettext 0.18.1.1_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 +universal is the latest installed :debug:main libiconv 1.14_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 +universal is the latest installed :debug:main ncurses 5.9_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 +universal is the latest installed :debug:main expat 2.0.1_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :msg:main ---> Computing dependencies for mp4v2:info:main .:debug:main Searching for dependency: help2man :debug:main Found Dependency: receipt exists for help2man :msg:main :debug:main Executing org.macports.main (mp4v2) :debug:main Skipping completed org.macports.archivefetch (mp4v2) :debug:main Skipping completed org.macports.fetch (mp4v2) :debug:main Skipping completed org.macports.checksum (mp4v2) :debug:main Skipping completed org.macports.extract (mp4v2) :debug:main Skipping completed org.macports.patch (mp4v2) :debug:main Skipping completed org.macports.configure (mp4v2) :debug:build build phase started at Fri Oct 21 20:49:00 CEST 2011 :notice:build ---> Building mp4v2 :debug:build Executing org.macports.build (mp4v2) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1' :info:build /bin/sh ./libtool --tag=CXX --mode=compile /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c -o src/bmff/typebmff.lo src/bmff/typebmff.cpp :info:build /bin/sh ./libtool --tag=CXX --mode=compile /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c -o src/itmf/type.lo src/itmf/type.cpp :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c src/itmf/type.cpp -fno-common -DPIC -o src/itmf/.libs/type.o :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I./include -I./include -I. -I. -I/opt/local/include -Wall -Wformat -O2 -arch x86_64 -fvisibility=hidden -c src/bmff/typebmff.cpp -fno-common -DPIC -o src/bmff/.libs/typebmff.o :info:build src/itmf/type.cpp:39:43: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::BasicType, 255>' :info:build const EnumBasicType::Entry EnumBasicType::data[] = { :info:build ~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:67:43: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::GenreType, 0>' :info:build const EnumGenreType::Entry EnumGenreType::data[] = { :info:build ~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:203:41: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::StikType, 255>' :info:build const EnumStikType::Entry EnumStikType::data[] = { :info:build ~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:219:47: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::AccountType, 255>' :info:build const EnumAccountType::Entry EnumAccountType::data[] = { :info:build ~~~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:229:47: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::CountryCode, 0>' :info:build const EnumCountryCode::Entry EnumCountryCode::data[] = { :info:build ~~~~~~~~~~~~~~~~~^ :info:build src/bmff/typebmff.cpp:38:49: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::bmff::LanguageCode, 0>' :info:build const EnumLanguageCode::Entry EnumLanguageCode::data[] = { :info:build ~~~~~~~~~~~~~~~~~~^ :info:build src/itmf/type.cpp:259:51: error: definition or redeclaration of 'data' not in a namespace enclosing 'Enum<mp4v2::impl::itmf::ContentRating, 255>' :info:build const EnumContentRating::Entry EnumContentRating::data[] = { :info:build ~~~~~~~~~~~~~~~~~~~^ :info:build 1 error generated. :info:build make: *** [src/bmff/typebmff.lo] Error 1 :info:build make: *** Waiting for unfinished jobs.... :info:build 6 errors generated. :info:build make: *** [src/itmf/type.lo] Error 1 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/work/mp4v2-1.9.1" && /usr/bin/make -j2 -w all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for mp4v2): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for mp4v2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_multimedia_mp4v2/mp4v2/main.log }}} -- Comment: Duplicate of #31547. -- Ticket URL: <https://trac.macports.org/ticket/31704#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#31704: Install of mp4v2 failed: "Error: Status 1 encountered during processing" ----------------------------------------+----------------------------------- Reporter: jens.is.located@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Resolution: duplicate | Keywords: Port: mp4v2 | ----------------------------------------+----------------------------------- Comment(by jens.is.located@…): Yes, that did the trick :) -- Ticket URL: <https://trac.macports.org/ticket/31704#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts