December 2007 - macports-users - lists.macosforge.org

Re: Building static version of ImageMagick (was: Re: Building static version of glib2)
by Andrei Tchijov 01 Dec '07

01 Dec '07

Thanx again!!!! I already have tried "upgrade glib2" and it did produce static libraries! It did complained a little about libiconv (just in case, I have attached all messages at the bottom of this e-mail) Andrei On Dec 1, 2007, at 15:07 , Ryan Schmidt wrote: > > On Dec 1, 2007, at 09:44, Andrei Tchijov wrote: > >> Thanks for quick response. While you fixing it, could you do the >> same with ImageMagic? It does not install any static libraries >> either. > > ImageMagick is a bit of a different case. Its default is to build > static libraries, but the port specifically requested that static > libraries be disabled, and it has done so since the port was created > in r2591 on 2003-05-08. > > Enabling the static libraries seems to work though so I changed this > in r31651. Wait 12 hours and you should be able to install version > 6.3.7-1_1 which includes this fix. > > [local/lib] > upgrade glib2 ---> Fetching libiconv ---> Attempting to fetch libiconv-1.12.tar.gz from http://ftp.gnu.org/gnu/libiconv ---> Verifying checksum(s) for libiconv ---> Extracting libiconv ---> Applying patches to libiconv ---> Configuring libiconv ---> Building libiconv with target all ---> Staging libiconv into destroot Error: Target org.macports.destroot returned: shell command " cd "/opt/ local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/libiconv-1.12" && make install DESTDIR=/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot " returned error 2 Command output: libtool: install: warning: remember to run `libtool -- finish /opt/local/lib' case "darwin9.1.0" in \ aix*) (cd /opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot/opt/local/ lib && \ objects=`ar t libiconv.a`" "`ar t /lib/libiconv.a` && \ ar x libiconv.a && ar x /lib/libiconv.a && \ ar q libiconv.new.a $objects && \ rm -f $objects && \ mv -f libiconv.new.a libiconv.a) ;; \ esac if test -n ""; then /usr/bin/install -c -m 644 /opt/local/var/ macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot/opt/local/ lib/.new && mv /opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot/opt/local/ lib/.new /opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot/opt/local/ lib/ ; fi cd srclib && make install prefix='/opt/local' exec_prefix='/opt/local' libdir='/opt/local/lib' make install-am make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. cd src && make install prefix='/opt/local' exec_prefix='/opt/local' libdir='/opt/local/lib' test `ls -ld . | sed -e 's/^d$.........$.*/\1/'` = rwxrwxrwx || chmod 777 . if [ ! -d /opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot/opt/local/ bin ] ; then /bin/sh ../build-aux/mkinstalldirs /opt/local/var/ macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot/opt/local/ bin ; fi case "darwin9.1.0" in \ hpux*) gcc -L/opt/local/lib -O2 `if test -n ''; then /opt/local/ bin; fi` iconv.o ../srclib/libicrt.a -L/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot/opt/local/ lib -liconv `if test -n '/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot'; then echo " -Wl,+b -Wl,/opt/local/lib"; fi` -o iconv;; \ *) /bin/sh ../libtool --mode=link gcc -L/opt/local/lib -O2 `if test -n ''; then /opt/local/bin; fi` iconv.o ../srclib/libicrt.a /opt/ local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_textproc_libiconv/work/destroot/opt/local/ lib/libiconv.la -o iconv;; \ esac gcc -O2 iconv.o -o iconv -L/opt/local/lib ../srclib/libicrt.a /opt/ local/lib/libiconv.dylib Undefined symbols: "_iconv_canonicalize", referenced from: _main in iconv.o _main in iconv.o ld: symbol(s) not found collect2: ld returned 1 exit status make[1]: *** [install] Error 1 make: *** [install] Error 2 Error: Unable to upgrade port: 1 ---> Fetching expat ---> Attempting to fetch expat-2.0.1.tar.gz from http://downloads.sourceforge.net/expat ---> Verifying checksum(s) for expat ---> Extracting expat ---> Configuring expat ---> Building expat with target all ---> Staging expat into destroot ---> Deactivating expat 1.95.8_1 ---> Installing expat 2.0.1_0 ---> Activating expat 2.0.1_0 ---> Cleaning expat ---> Fetching gettext ---> Attempting to fetch gettext-0.17.tar.gz from http://ftp.gnu.org/gnu/gettext ---> Verifying checksum(s) for gettext ---> Extracting gettext ---> Applying patches to gettext ---> Configuring gettext ---> Building gettext with target all ---> Staging gettext into destroot ---> Deactivating gettext 0.14.3_1 ---> Installing gettext 0.17_1 ---> Activating gettext 0.17_1 ---> Cleaning gettext ---> Fetching glib2 ---> Attempting to fetch glib-2.14.4.tar.bz2 from ftp://ftp.gtk.org/pub/glib/2.14/ ---> Verifying checksum(s) for glib2 ---> Extracting glib2 ---> Applying patches to glib2 ---> Configuring glib2 ---> Building glib2 with target all ---> Staging glib2 into destroot ---> Deactivating glib2 2.14.3_0+darwin_9 ---> Installing glib2 2.14.4_1+darwin_9 ---> Activating glib2 2.14.4_1+darwin_9 ---> Cleaning glib2

2 1

Building static version of glib2
by Andrei Tchijov 01 Dec '07

01 Dec '07

Is it possible to instruct macports to build/install static version of glib2? Thnx, Andrei Tchijov

2 3

Problem installing redland-bindings +python (python 2.3 dependency)
by David Larlet 01 Dec '07

01 Dec '07

Hi all, I got some trouble with the python redland--binding on leopard, here is the difference with the ruby installation: $ sudo port install redland-bindings +ruby ---> Fetching redland-bindings ---> Verifying checksum(s) for redland-bindings ---> Extracting redland-bindings ---> Configuring redland-bindings ---> Building redland-bindings with target all ---> Staging redland-bindings into destroot ---> Installing redland-bindings 1.0.6.1_0+ruby ---> Activating redland-bindings 1.0.6.1_0+ruby ---> Cleaning redland-bindings $ sudo port install redland-bindings +python ---> Building python23 with target all Error: Target org.macports.build returned: shell command " cd "/opt/ local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_lang_python23/work/Python-2.3.6" && make all " returned error 2 Command output: gcc -L/opt/local/lib -u __dummy -u _PyMac_Error - framework System -framework CoreServices -framework Foundation -o python.exe \ Modules/python.o \ -L. -lpython2.3 -ldl -framework CoreServices -framework Foundation Undefined symbols: "__dummy", referenced from: ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [python.exe] Error 1 Error: The following dependencies failed to build: python23 Error: Status 1 encountered during processing. The issue seemed to be a python23 dependency so I decide to install this one but I got another problem at this point: $ sudo port install python23 ---> Building python23 with target all Error: Target org.macports.build returned: shell command " cd "/opt/ local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_lang_python23/work/Python-2.3.6" && make all " returned error 2 Command output: gcc -L/opt/local/lib -u __dummy -u _PyMac_Error - framework System -framework CoreServices -framework Foundation -o python.exe \ Modules/python.o \ -L. -lpython2.3 -ldl -framework CoreServices -framework Foundation Undefined symbols: "__dummy", referenced from: ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [python.exe] Error 1 Error: Status 1 encountered during processing. which were already reported here: http://lists.macosforge.org/pipermail/macports-users/2007-November/006972.h… Now what can I do? I think it should more interesting to depends on python24 but at least to allow me to install python23, or maybe I'm doing something wrong? Regards, David

1 1

Problems compiling dbus-glib (freezing)
by Brett Randall 01 Dec '07

01 Dec '07

Hey all I'm very new to Mac. Have been using Debian linux for years but decided to give Mac OS X a go. Trying to get a bunch of apps working in Mac OS X but the dbus-glib library is not compiling. The port install sits there for hours doing nothing, and if I try a manual "make all", it gets to this line: Making all in core ../../dbus/dbus-binding-tool --prefix=my_object --mode=glib-server --output=test-service-glib-glue.h ./test-service-glib.xml And then sits there for hours. If I control-break out of it, I get an empty test-service-glib-glue.h file. If I kill the process, it dumps out a file but its broken half way through. Does anyone know what the problem is, and how I can either fix it or work around it to get this dependency compiled? Thanks! -- Brett Randall Systems Engineer Hillsong Church 02 8846 4800 ________________________________________________________________________ The material contained in this email may be confidential, and may also be the subject of copyright and/or privileged information. If you are not the intended recipient, any use, disclosure or copying of this document is prohibited. If you have received this document in error, please advise the sender and delete the document. This email communication does not create or vary any contractual relationship between Hillsong and you. Internet communications are not secure and accordingly Hillsong does not accept any legal liability for the contents of this message. Please note that neither Hillsong nor the sender accepts any responsibility for viruses and it is your responsibility to scan the email and any attachments. Hillsong www.hillsong.com ________________________________________________________________________

2 2

Ruby Fails
by Jay Chandler 01 Dec '07

01 Dec '07

Any wisdom on this failure? bash-3.2# port install rb-rails ---> Staging rb-activesupport into destroot Error: Target org.macports.destroot returned: shell command "/opt/local/bin/gem install --local --force --install-dir /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_ruby_rb-activesupport/work/destroot/opt/local/lib/ruby/gems/1.8 /opt/local/var/macports/distfiles/ruby/activesupport-1.4.2" returned error 1 Command output: /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/custom_require.rb:27:in `gem_original_require': no such file to load -- sources (LoadError) from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/custom_require.rb:27:in `require' from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/source_info_cache.rb:6 from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/custom_require.rb:27:in `gem_original_require' from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/custom_require.rb:27:in `require' from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/remote_installer.rb:12 from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/custom_require.rb:27:in `gem_original_require' from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/custom_require.rb:27:in `require' from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems.rb:112:in `manage_gems' from /opt/local/bin/gem:10 Error: The following dependencies failed to build: rb-actionmailer rb-actionpack rb-activesupport rb-actionwebservice rb-activerecord rb-rake Error: Status 1 encountered during processing.

3 3