March 2007 - macports-users - lists.macosforge.org

Hacking libsdl
by Nathan Brazil 08 Mar '07

08 Mar '07

Hi. I am trying to hack the Portfile for libsdl so that I can add the following argument to CC: -D-Dmain=SDL_main Can someone please show me how to do this? Thanks!

1 0

Re: gramps and python issues
by Paul Beard 08 Mar '07

08 Mar '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Mar 5, 2007, at 12:10 PM, Richard Taylor wrote: > I had exactly the same problem. I eventually came to the conclusion > that the > pygtk build on Mac OSX is broken. I don't believe that it is > anything to do > with gramps. I think that it is a combination of the gcc/gtk/pygtk > versions > but I was unable to verify the exact problem. > I have gone round and round on this. No closer to resolution. > In the end I abandoned trying to get it to work (after a 4 complete > uninstall/rebuild everything sessions with darwinports and fink) > with either > fink or darwinports and worked out a way to make it work with a > native gtk > build. If you are the maintainer, can that be rolled into a Portfile? It would be a lot better of the py-gtk2/py-gnome stuff could be resolved but I don't know how to get that going. It looks like gramps is crapping on a failed test for py-gnome, but the actual failure is a failure to run the test. checking for sh... /bin/sh checking Python bindings for gtk2.4 (pygtk2>=2.3.4)... ok checking Python bindings for gnome... ./configure: line 2324: 2894 Bus error $PYTHON conftest.py cat: conftest.out: No such file or directory configure: error: **** The python bindings for gnome 2.0 (gnome-python2) could not be found. Line 2324 is the first line of this block: $PYTHON conftest.py has_pygnome=`cat conftest.out` rm -f conftest.out conftest.py if test YES != "$has_pygnome" then { { echo "$as_me:$LINENO: error: **** The python bindings for gnome 2.0 (gnome-python2) could not be found." >&5 echo "$as_me: error: **** The python bindings for gnome 2.0 (gnome-python2) could not be found." >&2;} { (exit 1); exit 1; }; } fi The conftest.py file doesn't exist in the ported version (2.0.10) or the latest stable version (2.2.6): is it reasonable to expect it there or should it part of some other tarball? - -- Paul Beard contact info: www.paulbeard.org/paulbeard.vcf pictures: http://www.flickr.com/photos/pdb206/ Are you trying to win an argument or solve a problem? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (Darwin) iD8DBQFF7zQufHLPwpj1/JQRAhIpAKC8HWg1nfQu8uYqBMxXNo/fzBiUaQCcCdDI qGRoJ5DvsuDuD4haLY6COwA= =DWos -----END PGP SIGNATURE-----

2 4

py-gnome breaks ports that depend on it (was Re: gramps and python issues)
by Paul Beard 08 Mar '07

08 Mar '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Mar 7, 2007, at 10:18 PM, Richard Taylor wrote: > The problem here is the "Bus error". It is not a gramps issue. I > believe that > the "Bus error" is caused by a problem with gtk2/pygtk2 not gramps. > Yeah, I figured that out. Frustrating that no other port uses py- gnome or py-gtk2 in such a way as to make this more widely-known. > Try just running python from the command line and 'import gnome/ > import gtk' I > think that you will find that you get the same 'Bus error'. > I'm not that clever but I was able to provoke a bus error and capture the results with ktrace. > There is an issue with the configure scripts not working quite > right on OS X, > a work around is described on the gramps wiki. But this work around > will not > solve the problem that the version of gtk/pygtk is broken in macports. I have passed this on to the gramps developers, in the event they have any advice, though I know it isn't the result of anything they're doing. - -- Paul Beard contact info: www.paulbeard.org/paulbeard.vcf pictures: http://www.flickr.com/photos/pdb206/ Are you trying to win an argument or solve a problem? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (Darwin) iD8DBQFF76vEfHLPwpj1/JQRAvi9AJ0a8uMEcODotwVuKJ7EwtYHX1YiOQCbB3ic bZJuUvLvnMK7aOF/NWwCtgM= =SPND -----END PGP SIGNATURE-----

2 1

Re: gramps and python issues
by Yves de Champlain 08 Mar '07

08 Mar '07

Le 07-03-08 à 01:18, Richard Taylor a écrit : > On Thursday 08 March 2007 02:37, Yves de Champlain wrote: >> Le 07-03-07 à 16:52, Paul Beard a écrit : >>> -----BEGIN PGP SIGNED MESSAGE----- >>> Hash: SHA1 >>> >>> On Mar 5, 2007, at 12:10 PM, Richard Taylor wrote: >>>> I had exactly the same problem. I eventually came to the >>>> conclusion that the >>>> pygtk build on Mac OSX is broken. I don't believe that it is >>>> anything to do >>>> with gramps. I think that it is a combination of the gcc/gtk/pygtk >>>> versions >>>> but I was unable to verify the exact problem. >>> >>> I have gone round and round on this. No closer to resolution. >>> >>>> In the end I abandoned trying to get it to work (after a 4 complete >>>> uninstall/rebuild everything sessions with darwinports and fink) >>>> with either >>>> fink or darwinports and worked out a way to make it work with a >>>> native gtk >>>> build. >>> >>> If you are the maintainer, can that be rolled into a Portfile? It >>> would be a lot better of the py-gtk2/py-gnome stuff could be >>> resolved but I don't know how to get that going. It looks like >>> gramps is crapping on a failed test for py-gnome, but the actual >>> failure is a failure to run the test. >>> >>> checking for sh... /bin/sh >>> checking Python bindings for gtk2.4 (pygtk2>=2.3.4)... ok >>> checking Python bindings for gnome... ./configure: line 2324: 2894 >>> Bus error $PYTHON conftest.py >>> cat: conftest.out: No such file or directory >>> configure: error: >>> **** The python bindings for gnome 2.0 (gnome-python2) could not be >>> found. >>> >>> Line 2324 is the first line of this block: >>> $PYTHON conftest.py >>> has_pygnome=`cat conftest.out` >>> rm -f conftest.out conftest.py >>> if test YES != "$has_pygnome" >>> then >>> { { echo "$as_me:$LINENO: error: >>> **** The python bindings for gnome 2.0 (gnome-python2) could not be >>> found." >&5 >>> echo "$as_me: error: >>> **** The python bindings for gnome 2.0 (gnome-python2) could not be >>> found." >&2;} >>> { (exit 1); exit 1; }; } >>> fi >>> >>> The conftest.py file doesn't exist in the ported version (2.0.10) >>> or the latest stable version (2.2.6): is it reasonable to expect it >>> there or should it part of some other tarball? >> >> the conftest stuff is not a file, the code is in configure. If you >> look around, in configure or config.log, you should find how the >> check for py-gnome is done. >> >> At this point, it might be a good idea to notify the gramps >> developers. They are the ones who actually wrote that stuff and >> developers usually welcome the opportunity to make their software >> easier to use for everyone. >> > > The problem here is the "Bus error". It is not a gramps issue. I > believe that > the "Bus error" is caused by a problem with gtk2/pygtk2 not gramps. > > Try just running python from the command line and 'import gnome/ > import gtk' I > think that you will find that you get the same 'Bus error'. I don't have py-gnome but I just tried : Bilbo:~ yves$ python Python 2.4.3 (#1, Sep 29 2006, 07:22:43) [GCC 4.0.1 (Apple Computer, Inc. build 5363)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import gtk (.:845): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. /opt/local/lib/python2.4/site-packages/gtk-2.0/gtk/__init__.py:69: GtkWarning: could not open display warnings.warn(str(e), _gtk.Warning) >>> So i tried in an xterm : Bilbo:~/Documents/budget yves$ python Python 2.4.3 (#1, Sep 29 2006, 07:22:43) [GCC 4.0.1 (Apple Computer, Inc. build 5363)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import gtk (.:861): Gtk-WARNING **: Locale not supported by C library. Using the fallback C locale. >>> and that's all. No crash. But could the problem be solved by compiling in an xterm instead of a regular Terminal.app ? yves

1 0

Error compiling libsndfile
by jofivigo＠gmail.com 08 Mar '07

08 Mar '07

Hello. i'm trying to compile libsndfile 1.0.17 from the latest MacPorts but I'm getting this error: /usr/bin/libtool: can't locate file for: -lFLAC /usr/bin/libtool: file: -lFLAC is not an object file (not allowed in a library) make[3]: *** [libsndfile.la] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all] Error 2 make: *** [all-recursive] Error 1 Warning: the following items did not execute (for libsndfile): com.apple.activate com.apple.build com.apple.destroot com.apple.install Error: Status 1 encountered during processing. I've installed FLAC through MacPorts but it still doesn't compile, spitting the same errors. Should I install FLAC directly from source, even if I don't need it? Thank you.

2 1

gcc41 on Intel based iMac
by Zoltán Nagy 07 Mar '07

07 Mar '07

Hello, I installed the gcc 4.1.2 ant it went up without any problem. When I use this compile I usually receive something like : gcc-dp-4.1 -DHAVE_CONFIG_H -I. -I.. -I../../lhpdf-1.0.0/lhpdf -O2 - Wall -MT lhpdf.lo -MD -MP -MF .deps/lhpdf.Tpo -c ../../lhpdf-1.0.0/ lhpdf/lhpdf.c -fno-common -DPIC -o .libs/lhpdf.o /var/tmp//cctytpfJ.s:967:indirect jmp without `*' /var/tmp//cctytpfJ.s:982:indirect jmp without `*' /var/tmp//cctytpfJ.s:997:indirect jmp without `*' /var/tmp//cctytpfJ.s:1012:indirect jmp without `*' /var/tmp//cctytpfJ.s:1027:indirect jmp without `*' /var/tmp//cctytpfJ.s:1049:indirect jmp without `*' /var/tmp//cctytpfJ.s:1068:indirect jmp without `*' /var/tmp//cctytpfJ.s:1083:indirect jmp without `*' Of course the generated code doesn't work. The gcc-4.2 look OK but that is not a stable release. This compile (version 4.1.2) works on PowerPC based Mac. Is it possible to solve this problem? Thanks any help in advance, Zoltan

1 0

gdm build fails
by Peter Schneider 07 Mar '07

07 Mar '07

Hello, Some questions concerning gnome-desktop-suite or gnome meta-port occurred to my mind: Why is Gnome's display manager (gdm) in the dependencies list, what is it needed for on a computer that runs Gnome on top of MacOS X + XDarwin? I know what gdm usually does or is supposed to do. It doesn't build anyway. I've built Gnome twice, with $ sudo port -v install gnome and (after removing /opt and reinstalling macports) $ sudo port -v install gnome-desktop-suite It always stopped when it was about building gdm, always at keymouselistener.c (gdm-2.16.5/gui/modules/keymouselistener.c) I removed the gdm dependency entry from the Portfile, and the rest of gnome-desktop-suite (148 packages) built fine. I suspect it might be related to the X11-libs, just a guess. I have got XDarwin (xorg 6.8.2 from fink). Any idea is welcome, best regards, Petr ######## gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I. -I.. -DGDMCONFDIR=\"/opt/local/etc/gdm\" -DGNOMELOCALEDIR=\"/opt/local/share/locale\" -DXTHREADS -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11R6/include -I/opt/local/include/libglade-2.0 -I/opt/local/include/libxml2 -I/opt/local/include -L/opt/local/lib -g -O2 -Wall -Wmissing-prototypes -MT keymouselistener.lo -MD -MP -MF .deps/keymouselistener.Tpo -c keymouselistener.c -fno-common -DPIC -o .libs/keymouselistener.o keymouselistener.c: In function 'event_time': keymouselistener.c:544: error: 'XDeviceKeyEvent' undeclared (first use in this function) keymouselistener.c:544: error: (Each undeclared identifier is reported only once keymouselistener.c:544: error: for each function it appears in.) keymouselistener.c:544: error: parse error before ')' token keymouselistener.c:547: error: 'XDeviceButtonEvent' undeclared (first use in this function) keymouselistener.c:547: error: parse error before ')' token keymouselistener.c: In function 'keycodes_equal': keymouselistener.c:570: error: 'XDeviceKeyEvent' undeclared (first use in this function) keymouselistener.c:570: error: parse error before ')' token keymouselistener.c:570: error: parse error before ')' token keymouselistener.c: In function 'key_gesture_compare_func': keymouselistener.c:603: error: 'XDeviceButtonEvent' undeclared (first use in this function) keymouselistener.c:603: error: parse error before ')' token keymouselistener.c: In function 'gestures_filter': keymouselistener.c:626: warning: unused variable 'xinput_device' make[3]: *** [keymouselistener.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 ####### ___________________________________________________________ All New Yahoo! Mail Tired of unwanted email come-ons? Let our SpamGuard protect you. http://uk.docs.yahoo.com/nowyoucan.html

2 2

Hello. MacPorts variants Question.
by Park Jin Hyung 07 Mar '07

07 Mar '07

Hello. Before, I have asked about this problem, but no one answered.. was there any problem about my question? If it was, please let me know. and.. my problem is below: I have configured in /opt/local/etc/ports/ports.conf like 20 # Where to find global variants definition file (optional) 21 variants_conf /opt/local/etc/ports/variants.conf And, I added two variants, +multibyte, +ruby in /opt/local/etc/ports/ variants.conf 12 # Example: 13 # +ipv6 +no_x11 14 +multibyte +ruby BUT, I cannot see that variants are used. For example, when I try to build VIM, if i type "port -vd install vim", the result is --------------------------------------- Coffee:~ jenix$ sudo port -vd install vim Password: DEBUG: Found port in file:///opt/local/var/db/dports/sources/ rsync.rsync.darwinports.org_dpupdate_dports/editors/vim DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/ rsync.rsync.darwinports.org_dpupdate_dports/editors/vim DEBUG: Requested variant darwin is not provided by port vim. DEBUG: Requested variant i386 is not provided by port vim. DEBUG: Requested variant macosx is not provided by port vim. DEBUG: Executing variant darwin_i386 provides darwin_i386 DEBUG: Found port in file:///opt/local/var/db/dports/sources/ rsync.rsync.darwinports.org_dpupdate_dports/devel/gettext --------------------------------------- there is no any variants used as you can see. BUT, when I try to build VIM with "port -vd install vim +multibyte +ruby", --------------------------------------- Coffee:~ jenix$ sudo port -vd install vim +multibyte +ruby DEBUG: Found port in file:///opt/local/var/db/dports/sources/ rsync.rsync.darwinports.org_dpupdate_dports/editors/vim DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/ rsync.rsync.darwinports.org_dpupdate_dports/editors/vim DEBUG: Requested variant darwin is not provided by port vim. DEBUG: Requested variant i386 is not provided by port vim. DEBUG: Requested variant macosx is not provided by port vim. DEBUG: Executing variant multibyte provides multibyte DEBUG: Executing variant ruby provides ruby DEBUG: Executing variant darwin_i386 provides darwin_i386 --------------------------------------- You can see that ruby and multibyte variants have been activated. What's wrong with me? Could you give me any advice? --------------------------------------- Park, Jin Hyung jenix(a)jinhyung.org http://jinhyung.org

2 1

The python bindings for gtk 2.4 (pygtk2>=2.3.4) could not be found.
by Paul Beard 07 Mar '07

07 Mar '07

checking Python bindings for gtk2.4 (pygtk2>=2.3.4)... configure: error: **** The python bindings for gtk 2.4 (pygtk2>=2.3.4) could not be found. Warning: the following items did not execute (for gramps): com.apple.build com.apple.configure any idea what's going wrong here? -- Paul Beard contact info: www.paulbeard.org/paulbeard.vcf pictures: http://www.flickr.com/photos/pdb206/ Are you trying to win an argument or solve a problem?

2 9

mysql5 checksum failures
by Lorin Rivers 07 Mar '07

07 Mar '07

Something odd appears to be going on with the mysql port, ca. mysql-5.0.36. The checksums (md5 and sha1) are reported to be different in the portfile and in the distfile. If I replace the values in the portfile with those reported in the error message for the distfiles, I subsequently get a message about the downloaded file not being in gzip format. Inspecting the download sites listed in the porfile, the highest version number I see is 5.0.27. There's a 5.1.16 and a 5.2.3 (in other directories). I'm not sure what to do to get mysql installed, though, which I would like to do... Thanks!

2 2