January 2008 - macports-users - lists.macosforge.org

Run time messages with Scribus
by Thorsten Zörner 15 Jan '08

15 Jan '08

Hi there, for the last three versions of Scribus I've been experiencing warnings or errors (cannot tell) at run time, that look like this: p5085AEFD:~ thorsten$ scribus QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QDateTime::fromString: Parameter out of range QComboBox::changeItem: (Lang) Index 0 out of range QComboBox::changeItem: (Lang) Index 0 out of range QComboBox::changeItem: (Lang) Index 0 out of range QComboBox::changeItem: (Lang) Index 0 out of range QComboBox::changeItem: (Lang) Index 0 out of range QComboBox::changeItem: (Lang) Index 0 out of range and so on. The first block of QDateTime's I get when the program starts up. Then I opened an existing file - no extra output here. Then I clicked into two text boxes and a picture box - resulting in two lines of QComboBox each... When I asked it earlier on this list, I was pointed to newer versions of X11 over at http://trac.macosforge.org/projects/xquartz Now I have the latest version 2.1.2 installed, but the messages remain. My whole setup is this: MacBook Pro, Intel Core Duo 2GHz, running MacOS 10.5.1, MacPorts 1.60, X11 2.1.2, Scribus 1.3.3.11. Thanks in advance for any pointers! Cheers, Thorsten.

2 2

sqlite3 update problem
by Garrett Reid 15 Jan '08

15 Jan '08

I've been trying to update my installed ports, but it keeps bombing out on sqlite3 and I can't figure out why. Included below is the full transcript (it's not too long). Any ideas? Thanks in advance, Garrett [myhost:~] garrett$ sudo port selfupdate MacPorts base version 1.600 installed Downloaded MacPorts base version 1.600 The MacPorts installation is not outdated and so was not updated selfupdate done! [myhost:~] garrett$ sudo port upgrade outdated ---> Building sqlite3 with target all Error: Target org.macports.build returned: shell command " cd "/opt/ local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_databases_sqlite3/work/sqlite-3.5.4" && gnumake all " returned error 2 Command output: ./libtool --mode=compile --tag=CC /usr/bin/gcc-4.0 -O2 -I. -I./src -DNDEBUG -DSQLITE_THREADSAFE=1 - DSQLITE_THREAD_OVERRIDE_LOCK=-1 -DSQLITE_OMIT_LOAD_EXTENSION=1 -c ./ src/alter.c /usr/bin/gcc-4.0 -O2 -I. -I./src -DNDEBUG -DSQLITE_THREADSAFE=1 - DSQLITE_THREAD_OVERRIDE_LOCK=-1 -DSQLITE_OMIT_LOAD_EXTENSION=1 -c ./ src/alter.c -fno-common -DPIC -o .libs/alter.o ./src/alter.c: In function 'renameTableFunc': ./src/alter.c:77: error: 'TK_SPACE' undeclared (first use in this function) ./src/alter.c:77: error: (Each undeclared identifier is reported only once ./src/alter.c:77: error: for each function it appears in.) ./src/alter.c:79: error: 'TK_LP' undeclared (first use in this function) ./src/alter.c:79: error: 'TK_USING' undeclared (first use in this function) ./src/alter.c: In function 'renameTriggerFunc': ./src/alter.c:135: error: 'TK_SPACE' undeclared (first use in this function) ./src/alter.c:148: error: 'TK_DOT' undeclared (first use in this function) ./src/alter.c:148: error: 'TK_ON' undeclared (first use in this function) ./src/alter.c:151: error: 'TK_WHEN' undeclared (first use in this function) ./src/alter.c:151: error: 'TK_FOR' undeclared (first use in this function) ./src/alter.c:151: error: 'TK_BEGIN' undeclared (first use in this function) ./src/alter.c: In function 'reloadTableSchema': ./src/alter.c:246: error: 'OP_DropTrigger' undeclared (first use in this function) ./src/alter.c:251: error: 'OP_DropTable' undeclared (first use in this function) ./src/alter.c:256: error: 'OP_ParseSchema' undeclared (first use in this function) ./src/alter.c: In function 'sqlite3AlterRenameTable': ./src/alter.c:365: error: 'OP_String8' undeclared (first use in this function) ./src/alter.c:366: error: 'OP_VRename' undeclared (first use in this function) ./src/alter.c: In function 'sqlite3AlterFinishAddColumn': ./src/alter.c:478: error: 'TK_NULL' undeclared (first use in this function) gnumake: *** [alter.lo] Error 1 Error: Unable to upgrade port: 1

4 6

Re: lbpcap - yet again - Q
by Stefmit 15 Jan '08

15 Jan '08

I have already replied to a few people who have been involved in the process, via direct email, that the workaround did not fix the problem. I am not sure if any one of them is the maintainer, or not. I will take another look at the ticket, to see if it's been updated. Thanks, Stefan On Monday 14 January 2008 14:44:56 you wrote: > On Jan 14, 2008, at 08:23, Stefmit wrote: > > I keep getting errors on this (libpcap) port, using macports. Would > > anybody be > > kind enough to tell me if this package is being maintained? I > > apologize if I > > am breaking any rules of Qs, but this is my first version (10.5.x) > > macosx > > ever trying to use macports (have used only fink up to and > > including 10.4.x): > > Only the maintainer of the libpcap port can tell you if he is > actively maintaining the port. If you get no response from the > maintainer within 72 hours, someone else can try to fix the problem. > > > $ sudo port upgrade outdated > > ---> Building libpcap with target all > > Error: Target org.macports.build returned: shell command " > > cd "/opt/local/var/macports/build/ > > _opt_local_var_macports_sources_rsync.macports.org_release_ports_net_l > > ibpcap/work/libpcap-0.9.8" > > && make all " returned error 2 > > Command output: rm -f libpcap.dylib > > /usr/bin/gcc-4.0 -dynamiclib -o libpcap.`cat VERSION`.dylib \ > > -install_name /opt/local/lib/libpcap.0.dylib \ > > -compatibility_version 1.0.0 -current_version `cat > > VERSION` \ > > pcap-bpf.o fad-getad.o pcap.o inet.o gencode.o > > optimize.o > > nametoaddr.o etherent.o savefile.o bpf_filter.o bpf_image.o bpf_dump.o > > scanner.o grammar.o version.o > > Undefined symbols: > > "_lex_init", referenced from: > > _pcap_compile in gencode.o > > "_lex_cleanup", referenced from: > > _pcap_compile in gencode.o > > _pcap_compile in gencode.o > > "_pcap_lex", referenced from: > > _pcap_parse in grammar.o > > ld: symbol(s) not found > > collect2: ld returned 1 exit status > > make: *** [libpcap.dylib] Error 1 > > As I've already told you, this bug has already been reported: > > http://trac.macports.org/projects/macports/ticket/13802 > > As you see in the ticket notes, the maintainer has been quite active > in trying to resolve this problem, a possible workaround has been > found, and he is waiting on you to confirm whether the solution works > for you. You should have been receiving email for every change made > to the ticket, since I added you to its Cc list a week ago. Please > try the workaround listed there and add a note to the ticket to let > the maintainer know whether or not it worked for you.

2 1

lbpcap - yet again - Q
by Stefmit 14 Jan '08

14 Jan '08

I keep getting errors on this (libpcap) port, using macports. Would anybody be kind enough to tell me if this package is being maintained? I apologize if I am breaking any rules of Qs, but this is my first version (10.5.x) macosx ever trying to use macports (have used only fink up to and including 10.4.x): $ sudo port upgrade outdated ---> Building libpcap with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_libpcap/work/libpcap-0.9.8" && make all " returned error 2 Command output: rm -f libpcap.dylib /usr/bin/gcc-4.0 -dynamiclib -o libpcap.`cat VERSION`.dylib \ -install_name /opt/local/lib/libpcap.0.dylib \ -compatibility_version 1.0.0 -current_version `cat VERSION` \ pcap-bpf.o fad-getad.o pcap.o inet.o gencode.o optimize.o nametoaddr.o etherent.o savefile.o bpf_filter.o bpf_image.o bpf_dump.o scanner.o grammar.o version.o Undefined symbols: "_lex_init", referenced from: _pcap_compile in gencode.o "_lex_cleanup", referenced from: _pcap_compile in gencode.o _pcap_compile in gencode.o "_pcap_lex", referenced from: _pcap_parse in grammar.o ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [libpcap.dylib] Error 1 Error: Unable to upgrade port: 1 TIA, Stefan

2 1

OS X and shared Libraries
by elabsjng＠mac.com 14 Jan '08

14 Jan '08

Hi, When macports compiles and links an application are the shared library paths hard coded into the binary? I s this the typical behaviour on OS X? Best Regards, Simon.

3 4

follow-up to early Q about package maintainers
by Stefmit 14 Jan '08

14 Jan '08

I apologize for coming back to this, but I have - I hope this time - a more constructive question: where do I find a quick tutorial on how to use and possibly help the macports process of package maintenance and updating? I am not a programmer, so I won;t be able to produce source from scratch, but I can find my way around code (having helped source code maintenance, at least as tester, for some network stuff for macosx - mostly informal) enough to lend a hand, at least with testing and ticket updates ... TIA, Stefan P.S. I am dying for the libpcap fix - my expertise is in network (and associated security) and without this one properly done majority of my tools are practically useless

2 1

Problems with python idle2.4
by erchache2000 14 Jan '08

14 Jan '08

Hi, i was trying to install python idle2.4 on my macbook pro. I'm using leopard and lastest stable version of macports. I install python idle2.4 and show this error: sh-3.2# idle2.4 Traceback (most recent call last): File "/opt/local/bin/idle2.4", line 5, in ? main() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.4/lib/python2.4/idlelib/PyShell.py", line 1350, in main root = Tk(className="Idle") File "/opt/local/Library/Frameworks/Python.framework/Versions/2.4/lib/python2.4/lib-tk/Tkinter.py", line 1571, in __init__ self._loadtk() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.4/lib/python2.4/lib-tk/Tkinter.py", line 1589, in _loadtk raise RuntimeError, \ RuntimeError: tk.h version (8.5) doesn't match libtk.a version (8.4) But worst problem is that i make a port -d syn and after port -d update outdated, when try to search idle dissapear! :-S I dont know where is, so, before to send a ticket i want to hear some opinions about this. Any sugestion? Other question, if a package dissapear but is previous installed on my system. How i can know that is deleted from repository? Thanks in advance.

1 0

All HTTP Fetches fail, only FTP working
by Tico Ballagas 14 Jan '08

14 Jan '08

Hello- I'm having a strange problem where all of the fetch attempts using HTTP fail, but all FTP work fine (see output below). Any ideas what might be going wrong? I've tried uninstalling and reinstalling MacPorts, but the problem persists. Currently, as a workaround, I have to manually download packages and place them in the /opt/local/ directory myself. Thanks -Tico ---> Fetching curl ---> Attempting to fetch curl-7.17.1.tar.bz2 from http:// curl.haxx.se/download/ ---> Attempting to fetch curl-7.17.1.tar.bz2 from ftp://ftp.sunet.se/ pub/www/utilities/curl/ ---> Verifying checksum(s) for curl ---> Extracting curl ---> Configuring curl ---> Building curl with target all ---> Staging curl into destroot ---> Installing curl 7.17.1_0+darwin_8 ---> Activating curl 7.17.1_0+darwin_8 ---> Cleaning curl ---> Fetching openssh ---> Attempting to fetch openssh-4.7p1.tar.gz from http:// mirror.roothell.org/pub/OpenBSD/OpenSSH/portable ---> Attempting to fetch openssh-4.7p1.tar.gz from http://ftp- stud.fht-esslingen.de/pub/OpenBSD/OpenSSH/portable ---> Attempting to fetch openssh-4.7p1.tar.gz from http:// mirror.paranoidbsd.org/pub/OpenBSD/OpenSSH/portable ---> Attempting to fetch openssh-4.7p1.tar.gz from ftp:// ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable ---> Verifying checksum(s) for openssh ---> Extracting openssh ---> Configuring openssh ---> Building openssh with target all ---> Staging openssh into destroot ---> Creating launchd control script ########################################################### # A startup item has been generated that will aid in # starting openssh with launchd. It is disabled # by default. Execute the following command to start it, # and to cause it to launch at startup: # # sudo launchctl load -w /Library/LaunchDaemons/ org.macports.OpenSSH.plist ########################################################### ---> Installing openssh 4.7p1_1+darwin_8 ---> Activating openssh 4.7p1_1+darwin_8 ---> Cleaning openssh ---> Fetching perl5.8 ---> Attempting to fetch perl-5.8.8.tar.bz2 from http://www.cpan.org/ src/5.0/ ---> Attempting to fetch perl-5.8.8.tar.bz2 from http:// svn.macports.org/repository/macports/distfiles/perl5.8 ---> Attempting to fetch perl-5.8.8.tar.bz2 from http:// svn.macports.org/repository/macports/distfiles/general/ ---> Attempting to fetch perl-5.8.8.tar.bz2 from http:// svn.macports.org/repository/macports/downloads/perl5.8 Error: Target org.macports.fetch returned: fetch failed Error: The following dependencies failed to build: p5-error perl5.8 rsync popt Error: Status 1 encountered during processing.

3 2

Using Leopard's ruby with Macports' ruby libraries
by Douglas Tan 14 Jan '08

14 Jan '08

-------- Original Message -------- Subject: macports-users Digest, Vol 17, Issue 59 Date: Sun, 13 Jan 2008 14:00:50 -0800 (PST) From: macports-users-request(a)lists.macosforge.org Reply-To: macports-users(a)lists.macosforge.org To: macports-users(a)lists.macosforge.org Send macports-users mailing list submissions to macports-users(a)lists.macosforge.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.macosforge.org/mailman/listinfo/macports-users or, via email, send a message with subject or body 'help' to macports-users-request(a)lists.macosforge.org You can reach the person managing the list at macports-users-owner(a)lists.macosforge.org When replying, please edit your Subject line so it is more specific than "Re: Contents of macports-users digest..." Today's Topics: 1. Re: View of non maintained packages (Rolf W?rdemann) 2. Re: View of non maintained packages (Benoit Caccinolo) 3. Re: View of non maintained packages (Rolf W?rdemann) 4. Re: [macports] The teTeX package should be phased out (Mark Wardle) 5. libffi: pyobjc-4.1 fetch failing (LeAnne Lis) 6. libffi: pyobjc-1.4 fetch failing (LeAnne Lis) 7. Re: Using Leopard's ruby with Macports' ruby libraries (paul beard) ---------------------------------------------------------------------- Message: 1 Date: Sun, 13 Jan 2008 22:17:45 +0100 From: Rolf W?rdemann <rowue(a)digitalis.org> Subject: Re: View of non maintained packages To: Benoit Caccinolo <benoit.caccinolo(a)gmail.com> Cc: macports-users(a)lists.macosforge.org Message-ID: <0046C8F1-7BC1-4AE9-983D-C232AEC62696(a)digitalis.org> Content-Type: text/plain; charset="iso-8859-1" Am 13.01.2008 um 22:09 schrieb Benoit Caccinolo: > Hello, > > Is it possible to have a view of all the non maintained ports ? try: port echo maintainer:nomaintainer reg's Rolf > > -- > Benoit > _______________________________________________ > macports-users mailing list > macports-users(a)lists.macosforge.org > http://lists.macosforge.org/mailman/listinfo/macports-users -- Security is an illusion - Datasecurity twice Rolf Würdemann - private: rowue(a)digitalis.org - office: rowue(a)crew-gmbh.de GnuPG fingerprint: 7383 348F 67D1 CD27 C90F DDD0 86A3 31B6 67F0 D02F jabber: rowue(a)digitalis.org 2F66A061 89BCA1A0 AD654827 6FD037FF 53C3E932

2 1

View of non maintained packages
by Benoit Caccinolo 14 Jan '08

14 Jan '08

Hello, Is it possible to have a view of all the non maintained ports ? -- Benoit

6 11