I had to split this into two emails since the compile output is so long... ---- Okay, before I submit these as bug reports via trac, I wanted to make sure that I am not the only one with this... I just got a new MacBookPro and am loving it, but while building a fresh install of the ports from my old PowerBook, I had these issues with the OpenSSH and Samba3 package. Plus, when I did an update a week or so ago, john would not build correctly. So....Has anyone else seen this? More details: 10.4.8 Build 8N1430, with all fixes installed. MacPorts 1.320 fully updated & sync'ed as of March 4th, 15:00 PST Xcode Tools 2.4.1 installed X11 1.1.3 installed I did not transfer over ANY of my old ports tree, just did a 'port installed' on the G4 and re-built everything in that list on the Mac Book Pro. Ideas? Scott PS> anyone been able to find RPM to install? ============================================================== 1:~/Desktop/darwin port issues sck$ date Sun Mar 4 13:14:47 PST 2007 1:~/Desktop/darwin port issues sck$ sudo port selfupdate && sudo port sync && sudo port clean --alll  openssh && sudo port -d install openshh  sh DarwinPorts base version 1.320 installed Downloaded MacPorts base version 1.320 The MacPorts installation is not outdated and so was not updated selfupdate done! Portfile changed since last build; discarding previous state. ---> Cleaning openssh ---> Fetching openssh DEBUG: Executing com.apple.fetch (openssh) ---> openssh-4.5p1.tar.gz doesn't seem to exist in /opt/local/var/db/dports/distfiles/openssh ---> Attempting to fetch openssh-4.5p1.tar.gz from ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable ---> Verifying checksum(s) for openssh DEBUG: Executing com.apple.checksum (openssh) ---> Checksumming openssh-4.5p1.tar.gz DEBUG: Correct (md5) checksum for openssh-4.5p1.tar.gz DEBUG: Correct (sha1) checksum for openssh-4.5p1.tar.gz DEBUG: Correct (rmd160) checksum for openssh-4.5p1.tar.gz ---> Extracting openssh DEBUG: Executing com.apple.extract (openssh) ---> Extracting openssh-4.5p1.tar.gz DEBUG: setting option extract.args to /opt/local/var/db/dports/distfiles/openssh/openssh-4.5p1.tar.gz DEBUG: Assembled command: 'cd "/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work" && gzip -dc /opt/local/var/db/dports/distfiles/openssh/openssh-4.5p1.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing com.apple.patch (openssh) ---> Configuring openssh DEBUG: Executing proc-pre-com.apple.configure-configure-0 DEBUG: Executing com.apple.configure (openssh) DEBUG: Assembled command: 'cd "/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/openssh-4.5p1" && CPPFLAGS="-fno-builtin -I/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/include" CC=/usr/bin/gcc-4.0 CPP=/usr/bin/cpp-4.0 ./configure --prefix=/opt/local --with-ssl-dir=/opt/local --sysconfdir=/opt/local/etc/ssh --with-privsep-path=/opt/local/var/empty --with-md5-passwords --with-pid-dir=/opt/local/var/run --with-tcp-wrappers --with-pam --disable-suid-ssh --with-random=/dev/urandom --mandir=/opt/local/share/man --with-zlib=/opt/local' checking for gcc... /usr/bin/gcc-4.0 checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... [ ... lines deleted ...] checking if your system defines WTMPX_FILE... no configure: creating ./config.status config.status: creating Makefile config.status: creating buildpkg.sh config.status: creating opensshd.init config.status: creating openssh.xml config.status: creating openbsd-compat/Makefile config.status: creating openbsd-compat/regress/Makefile config.status: creating scard/Makefile config.status: creating ssh_prng_cmds config.status: creating survey.sh config.status: creating config.h OpenSSH has been configured with the following options: User binaries: /opt/local/bin System binaries: /opt/local/sbin Configuration files: /opt/local/etc/ssh Askpass program: /opt/local/libexec/ssh-askpass Manual pages: /opt/local/share/man/manX PID file: /opt/local/var/run Privilege separation chroot path: /opt/local/var/empty sshd default user PATH: /usr/bin:/bin:/usr/sbin:/sbin:/opt/local/bin Manpage format: doc PAM support: yes OSF SIA support: no KerberosV support: no SELinux support: no Smartcard support: no S/KEY support: no TCP Wrappers support: yes MD5 password support: yes libedit support: no Solaris process contract support: no IP address in $DISPLAY hack: no Translate v4 in v6 hack: no BSD Auth support: no Random number source: OpenSSL internal ONLY Host: i686-apple-darwin8.8.5 Compiler: /usr/bin/gcc-4.0 Compiler flags: -g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wno-pointer-sign Preprocessor flags: -I/opt/local/include -I/opt/local/include -fno-builtin -I/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/include Linker flags: -L/opt/local/lib -L/opt/local/lib Libraries: -lwrap -lpam -ldl -lcrypto -lz PAM is enabled. You may need to install a PAM control file for sshd, otherwise password authentication may fail. Example PAM control files can be found in the contrib/ subdirectory ---> Building openssh with target all DEBUG: Executing com.apple.build (openssh) DEBUG: Assembled command: 'cd "/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/openssh-4.5p1" && make all' conffile=`echo sshd_config.out | sed 's/.out$//'`; \ /usr/bin/sed -e 's|/etc/ssh/ssh_prng_cmds|/opt/local/etc/ssh/ssh_prng_cmds|g' -e 's|/etc/ssh/ssh_config|/opt/local/etc/ssh/ssh_config|g' -e 's|/etc/ssh/ssh_known_hosts|/opt/local/etc/ssh/ssh_known_hosts|g' -e 's|/etc/ssh/sshd_config|/opt/local/etc/ssh/sshd_config|g' -e 's|/usr/libexec|/opt/local/libexec|g' -e 's|/etc/shosts.equiv|/opt/local/etc/ssh/shosts.equiv|g' -e 's|/etc/ssh/ssh_host_key|/opt/local/etc/ssh/ssh_host_key|g' -e 's|/etc/ssh/ssh_host_dsa_key|/opt/local/etc/ssh/ssh_host_dsa_key|g' -e 's|/etc/ssh/ssh_host_rsa_key|/opt/local/etc/ssh/ssh_host_rsa_key|g' -e 's|/var/run/sshd.pid|/opt/local/var/run/sshd.pid|g' -e 's|/etc/ssh/moduli|/opt/local/etc/ssh/moduli|g' -e 's|/etc/ssh/sshrc|/opt/local/etc/ssh/sshrc|g' -e 's|/usr/X11R6/bin/xauth|/usr/X11R6/bin/xauth|g' -e 's|/var/empty|/opt/local/var/empty|g' -e 's|/usr/bin:/bin:/usr/sbin:/sbin|/usr/bin:/bin:/usr/sbin:/sbin:/opt/local/bin|g' ./${conffile} > sshd_config.out conffile=`echo ssh_config.out | sed 's/.out$//'`; \ [ ... lines deleted ...] readconf.c: In function 'process_config_line': readconf.c:328: warning: 'scale' may be used uninitialized in this function readconf.c:328: warning: 'value' may be used uninitialized in this function /usr/bin/gcc-4.0 -g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wno-pointer-sign -I. -I. -I/opt/local/include -I/opt/local/include -fno-builtin -I/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/include -DSSHDIR=\"/opt/local/etc/ssh\" -D_PATH_SSH_PROGRAM=\"/opt/local/bin/ssh\" -D_PATH_SSH_ASKPASS_DEFAULT=\"/opt/local/libexec/ssh-askpass\" -D_PATH_SFTP_SERVER=\"/opt/local/libexec/sftp-server\" -D_PATH_SSH_KEY_SIGN=\"/opt/local/libexec/ssh-keysign\" -D_PATH_SSH_PIDDIR=\"/opt/local/var/run\" -D_PATH_PRIVSEP_CHROOT_DIR=\"/opt/local/var/empty\" -DSSH_RAND_HELPER=\"/opt/local/libexec/ssh-rand-helper\" -DHAVE_CONFIG_H -c clientloop.c /usr/bin/gcc-4.0 -g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wno-pointer-sign -I. -I. -I/opt/local/include -I/opt/local/include -fno-builtin -I/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/include -DSSHDIR=\"/opt/local/etc/ssh\" -D_PATH_SSH_PROGRAM=\"/opt/local/bin/ssh\" -D_PATH_SSH_ASKPASS_DEFAULT=\"/opt/local/libexec/ssh-askpass\" -D_PATH_SFTP_SERVER=\"/opt/local/libexec/sftp-server\" -D_PATH_SSH_KEY_SIGN=\"/opt/local/libexec/ssh-keysign\" -D_PATH_SSH_PIDDIR=\"/opt/local/var/run\" -D_PATH_PRIVSEP_CHROOT_DIR=\"/opt/local/var/empty\" -DSSH_RAND_HELPER=\"/opt/local/libexec/ssh-rand-helper\" -DHAVE_CONFIG_H -c sshtty.c /usr/bin/gcc-4.0 -g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wno-pointer-sign -I. -I. -I/opt/local/include -I/opt/local/include -fno-builtin -I/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/include -DSSHDIR=\"/opt/local/etc/ssh\" -D_PATH_SSH_PROGRAM=\"/opt/local/bin/ssh\" -D_PATH_SSH_ASKPASS_DEFAULT=\"/opt/local/libexec/ssh-askpass\" -D_PATH_SFTP_SERVER=\"/opt/local/libexec/sftp-server\" -D_PATH_SSH_KEY_SIGN=\"/opt/local/libexec/ssh-keysign\" -D_PATH_SSH_PIDDIR=\"/opt/local/var/run\" -D_PATH_PRIVSEP_CHROOT_DIR=\"/opt/local/var/empty\" -DSSH_RAND_HELPER=\"/opt/local/libexec/ssh-rand-helper\" -DHAVE_CONFIG_H -c sshconnect.c /usr/bin/gcc-4.0 -g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wno-pointer-sign -I. -I. -I/opt/local/include -I/opt/local/include -fno-builtin -I/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/include -DSSHDIR=\"/opt/local/etc/ssh\" -D_PATH_SSH_PROGRAM=\"/opt/local/bin/ssh\" -D_PATH_SSH_ASKPASS_DEFAULT=\"/opt/local/libexec/ssh-askpass\" -D_PATH_SFTP_SERVER=\"/opt/local/libexec/sftp-server\" -D_PATH_SSH_KEY_SIGN=\"/opt/local/libexec/ssh-keysign\" -D_PATH_SSH_PIDDIR=\"/opt/local/var/run\" -D_PATH_PRIVSEP_CHROOT_DIR=\"/opt/local/var/empty\" -DSSH_RAND_HELPER=\"/opt/local/libexec/ssh-rand-helper\" -DHAVE_CONFIG_H -c sshconnect1.c /usr/bin/gcc-4.0 -g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wno-pointer-sign -I. -I. -I/opt/local/include -I/opt/local/include -fno-builtin -I/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/include -DSSHDIR=\"/opt/local/etc/ssh\" -D_PATH_SSH_PROGRAM=\"/opt/local/bin/ssh\" -D_PATH_SSH_ASKPASS_DEFAULT=\"/opt/local/libexec/ssh-askpass\" -D_PATH_SFTP_SERVER=\"/opt/local/libexec/sftp-server\" -D_PATH_SSH_KEY_SIGN=\"/opt/local/libexec/ssh-keysign\" -D_PATH_SSH_PIDDIR=\"/opt/local/var/run\" -D_PATH_PRIVSEP_CHROOT_DIR=\"/opt/local/var/empty\" -DSSH_RAND_HELPER=\"/opt/local/libexec/ssh-rand-helper\" -DHAVE_CONFIG_H -c sshconnect2.c /usr/bin/gcc-4.0 -o ssh ssh.o readconf.o clientloop.o sshtty.o sshconnect.o sshconnect1.o sshconnect2.o -L. -Lopenbsd-compat/ -L/opt/local/lib -L/opt/local/lib -lssh -lopenbsd-compat -lcrypto -lz /usr/bin/ld: warning multiple definitions of symbol _ssh_connect sshconnect.o definition of _ssh_connect in section (__TEXT,__text) /opt/local/lib/libssh.dylib(client.o) definition of _ssh_connect /usr/bin/ld: Undefined symbols: _a2port _a2tun _auth_request_forwarding _buffer_append _buffer_clear _buffer_get_char _buffer_get_int _buffer_init _buffer_len _buffer_ptr _buffer_put_cstring _buffer_put_int _channel_new _channel_register_confirm _channel_register_filter _channel_request_remote_forwarding _channel_request_start _channel_send_open _channel_set_af _channel_setup_local_fwd_listener _cipher_number _ciphers_valid _cleanhostname _compat20 _datafellows _debug _debug2 _debug3 _error _fatal _hpdelim _init_rng _key_free _key_load_private_type _key_load_public _log_init _logit _mac_valid _match_pattern _mm_send_fd _packet_close _packet_disconnect _packet_get_int _packet_put_cstring _packet_put_int _packet_put_string _packet_remaining _packet_set_interactive _packet_start _packet_start_compression _packet_write_wait _percent_expand _permanently_set_uid _pwcopy _sanitise_stdfd _seed_rng _set_nonblock _ssh_agent_present _ssh_msg_recv _ssh_msg_send _tilde_expand_filename _tty_make_modes _tun_open _x11_request_forwarding_with_spoofing _xcalloc _xfree _xstrdup _convtime _key_names_valid2 _log_level_number _proto_spec _strdelim _xmalloc _ask_permission _atomicio _buffer_consume _buffer_get_string _buffer_put_char _channel_after_select _channel_cancel_cleanup _channel_connect_by_listen_address _channel_free_all _channel_input_close _channel_input_close_confirmation _channel_input_data _channel_input_extended_data _channel_input_ieof _channel_input_oclose _channel_input_open_confirmation _channel_input_open_failure _channel_input_port_open _channel_input_window_adjust _channel_lookup _channel_not_very_much_buffered_data _channel_open_message _channel_output_poll _channel_prepare_select _channel_register_cleanup _channel_request_rforward_cancel _channel_send_window_changes _channel_still_open _channel_stop_listening _compat13 _deny_input_open _dispatch_init _dispatch_protocol_error _dispatch_run _dispatch_set _kex_input_kexinit _kex_send_kexinit _max_packet_size _mm_receive_fd _packet_get_char _packet_get_connection_in _packet_get_connection_out _packet_get_string _packet_have_data_to_write _packet_need_rekeying _packet_not_very_much_data_to_write _packet_process_incoming _packet_put_char _packet_write_poll _read_passphrase _ssh_get_authentication_socket _unset_nonblock _x11_connect_display _x11_input_open _add_host_to_hostfile _check_host_in_hostfile _chop _compat_datafellows _enable_compat13 _enable_compat20 _key_equal _key_fingerprint _key_new _key_type _lookup_key_in_hostfile_by_type _packet_set_connection _packet_set_nonblocking _permanently_drop_suid _put_host_port _verify_host_key_dns _xasprintf _cipher_mask_ssh1 _cipher_name _derive_ssh1_session_id _packet_get_bignum _packet_put_bignum _packet_read_expect _packet_set_encryption_key _packet_set_protocol_flags _rsa_private_decrypt _rsa_public_encrypt _ssh_close_authentication_connection _ssh_decrypt_challenge _ssh_get_authentication_connection _ssh_get_first_identity _ssh_get_next_identity _buffer_put_string _compat_cipher_proposal _dispatch_range _get_local_name _kex_setup _kexdh_client _kexgex_client _key_from_blob _key_sign _key_ssh_name _key_to_blob _key_type_from_name _match_list _packet_add_padding _packet_put_raw _packet_set_rekey_limit _ssh_agent_sign collect2: ld returned 1 exit status make: *** [ssh] Error 1 Error: Target com.apple.build returned: shell command "cd "/opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_openssh/work/openssh-4.5p1" && make all" returned error 2 Command output: _packet_put_bignum _packet_read_expect _packet_set_encryption_key _packet_set_protocol_flags _rsa_private_decrypt _rsa_public_encrypt _ssh_close_authentication_connection _ssh_decrypt_challenge _ssh_get_authentication_connection _ssh_get_first_identity _ssh_get_next_identity _buffer_put_string _compat_cipher_proposal _dispatch_range _get_local_name _kex_setup _kexdh_client _kexgex_client _key_from_blob _key_sign _key_ssh_name _key_to_blob _key_type_from_name _match_list _packet_add_padding _packet_put_raw _packet_set_rekey_limit _ssh_agent_sign collect2: ld returned 1 exit status make: *** [ssh] Error 1 Warning: the following items did not execute (for openssh): com.apple.activate com.apple.build com.apple.destroot com.apple.install Error: Status 1 encountered during processing.