Go to the following page and follow the instructions there: http://trac.macosforge.org/projects/macports/wiki/ProblemHotlist And then try again. CC any replies or further question to the mailing list, as I'm going offline for the day. On 10 Nov 2006, at 08:25, massimodisasha wrote:
hi Randall, after a long compiling... i've a numerous errors... see this long log-file:
powerbook-g4-12-di-epifanio:~ epifanio$ sudo port upgrade outdated ---> Deactivating pkgconfig 0.20_0 ---> Fetching pkgconfig ---> Attempting to fetch pkg-config-0.21.tar.gz from http:// pkgconfig.freedesktop.org/releases/ ---> Verifying checksum(s) for pkgconfig ---> Extracting pkgconfig ---> Configuring pkgconfig ---> Building pkgconfig with target all ---> Staging pkgconfig into destroot ---> Packaging tgz archive for pkgconfig 0.21_0 ---> Installing pkgconfig 0.21_0 ---> Activating pkgconfig 0.21_0 ---> Cleaning pkgconfig ---> Deactivating libiconv 1.10_1+darwin_8 ---> Fetching libiconv ---> Attempting to fetch libiconv-1.11.tar.gz from ftp:// ftp.gnu.org/gnu/libiconv ---> Verifying checksum(s) for libiconv ---> Extracting libiconv ---> Configuring libiconv ---> Building libiconv with target all ---> Staging libiconv into destroot ---> Packaging tgz archive for libiconv 1.11_0+darwin_8 ---> Installing libiconv 1.11_0+darwin_8 ---> Activating libiconv 1.11_0+darwin_8 ---> Cleaning libiconv ---> Deactivating gettext 0.14.5_1 ---> Fetching gettext ---> Attempting to fetch gettext-0.15.tar.gz from ftp:// ftp.gnu.org/gnu/gettext ---> Verifying checksum(s) for gettext ---> Extracting gettext ---> Applying patches to gettext ---> Configuring gettext ---> Building gettext with target all ---> Staging gettext into destroot ---> Packaging tgz archive for gettext 0.15_0 ---> Installing gettext 0.15_0 ---> Activating gettext 0.15_0 ---> Cleaning gettext ---> Deactivating atk 1.11.4_0 ---> Fetching atk ---> Attempting to fetch atk-1.12.2.tar.bz2 from http:// ftp.rpmfind.net/linux/gnome.org/sources/atk/1.12 ---> Attempting to fetch atk-1.12.2.tar.bz2 from http:// archive.progeny.com/GNOME/sources/atk/1.12 ---> Attempting to fetch atk-1.12.2.tar.bz2 from http:// mirror.clarkson.edu/pub/gnome/sources/atk/1.12 ---> Attempting to fetch atk-1.12.2.tar.bz2 from http:// mirror.aarnet.edu.au/pub/GNOME/sources/atk/1.12 ---> Attempting to fetch atk-1.12.2.tar.bz2 from http:// www.download-ftp-center.com/mirrors/gnome.org/sources/atk/1.12 ---> Attempting to fetch atk-1.12.2.tar.bz2 from http:// ftp.unina.it/pub/linux/GNOMEsources/atk/1.12 ---> Attempting to fetch atk-1.12.2.tar.bz2 from http:// fr.rpmfind.net/linux/gnome.org/sources/atk/1.12 ---> Attempting to fetch atk-1.12.2.tar.bz2 from http:// fr2.rpmfind.net/linux/gnome.org/sources/atk/1.12 ---> Verifying checksum(s) for atk ---> Extracting atk ---> Configuring atk Error: Target com.apple.configure returned: configure failure: shell command "cd "/opt/local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ dports_devel_atk/work/atk-1.12.2" && LDFLAGS="-L/opt/local/lib -no- undefined" CPPFLAGS="-I/opt/local/include -no-cpp-precomp" CFLAGS="- O3 -funroll-loops -fstrict-aliasing" ./configure --prefix=/opt/ local --disable-gtk-doc" returned error 1 Command output: checking for aclocal flags... checking for pkg-config... /opt/local/bin/pkg-config checking for GLIB - version >= 2.5.7... no *** Could not run GLIB test program, checking why... *** The test program compiled, but did not run. This usually means *** that the run-time linker is not finding GLIB or finding the wrong *** version of GLIB. If it is not finding GLIB, you'll need to set your *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point *** to the installed location Also, make sure you have run ldconfig if that *** is required on your system *** *** If you have an old version installed, it is best to remove it, although *** you may also be able to get things to work by modifying LD_LIBRARY_PATH checking for pkg-config... (cached) /opt/local/bin/pkg-config checking for GLIB - version >= 2.0.0... no *** Could not run GLIB test program, checking why... *** The test program compiled, but did not run. This usually means *** that the run-time linker is not finding GLIB or finding the wrong *** version of GLIB. If it is not finding GLIB, you'll need to set your *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point *** to the installed location Also, make sure you have run ldconfig if that *** is required on your system *** *** If you have an old version installed, it is best to remove it, although *** you may also be able to get things to work by modifying LD_LIBRARY_PATH configure: error: *** GLIB 2.0.0 or better is required. The latest version of *** GLIB is always available from ftp://ftp.gtk.org/. If GLIB is installed *** but not in the same location as pkg-config add the location of the file *** glib-2.0.pc to the environment variable PKG_CONFIG_PATH.
---> Deactivating fontconfig 2.3.2_0 ---> Fetching fontconfig ---> Verifying checksum(s) for fontconfig ---> Extracting fontconfig ---> Configuring fontconfig ---> Building fontconfig with target all ---> Staging fontconfig into destroot ---> Packaging tgz archive for fontconfig 2.3.2_2+macosx ---> Installing fontconfig 2.3.2_2+macosx ---> Activating fontconfig 2.3.2_2+macosx ---> Cleaning fontconfig ---> Deactivating libpng 1.2.8_2+darwin_8 ---> Fetching libpng ---> Attempting to fetch libpng-1.2.10.tar.bz2 from http:// easynews.dl.sourceforge.net/libpng ---> Verifying checksum(s) for libpng ---> Extracting libpng ---> Configuring libpng ---> Building libpng with target all ---> Staging libpng into destroot ---> Packaging tgz archive for libpng 1.2.10_2+darwin_8 ---> Installing libpng 1.2.10_2+darwin_8 ---> Activating libpng 1.2.10_2+darwin_8 ---> Cleaning libpng ---> Deactivating cairo 1.0.4_0 ---> Fetching cairo ---> Attempting to fetch cairo-1.2.6.tar.gz from http:// cairographics.org/releases/ ---> Verifying checksum(s) for cairo ---> Extracting cairo ---> Configuring cairo ---> Building cairo with target all ---> Staging cairo into destroot ---> Packaging tgz archive for cairo 1.2.6_0 ---> Installing cairo 1.2.6_0 ---> Activating cairo 1.2.6_0 ---> Cleaning cairo ---> Activating gtk2 2.8.19_0+darwin_8 Error: Activating gtk2 2.8.19_0 failed: Image error: Another version of gtk2 (2.8.17_0+darwin_8) is already active. ---> Deactivating libtool 1.5.20_0 ---> Fetching libtool ---> Attempting to fetch libtool-1.5.22.tar.gz from ftp:// ftp.gnu.org/gnu/libtool ---> Verifying checksum(s) for libtool ---> Extracting libtool ---> Configuring libtool ---> Building libtool with target all ---> Staging libtool into destroot ---> Packaging tgz archive for libtool 1.5.22_0 ---> Installing libtool 1.5.22_0 ---> Activating libtool 1.5.22_0 ---> Cleaning libtool ---> Deactivating pango 1.12.1_0 ---> Fetching pango ---> Attempting to fetch pango-1.14.3.tar.bz2 from http:// ftp.rpmfind.net/linux/gnome.org/sources/pango/1.14 ---> Attempting to fetch pango-1.14.3.tar.bz2 from http:// archive.progeny.com/GNOME/sources/pango/1.14 ---> Attempting to fetch pango-1.14.3.tar.bz2 from http:// mirror.clarkson.edu/pub/gnome/sources/pango/1.14 ---> Attempting to fetch pango-1.14.3.tar.bz2 from http:// mirror.aarnet.edu.au/pub/GNOME/sources/pango/1.14 ---> Attempting to fetch pango-1.14.3.tar.bz2 from http:// www.download-ftp-center.com/mirrors/gnome.org/sources/pango/1.14 ---> Attempting to fetch pango-1.14.3.tar.bz2 from http:// ftp.unina.it/pub/linux/GNOMEsources/pango/1.14 ---> Attempting to fetch pango-1.14.3.tar.bz2 from http:// fr.rpmfind.net/linux/gnome.org/sources/pango/1.14 ---> Attempting to fetch pango-1.14.3.tar.bz2 from http:// fr2.rpmfind.net/linux/gnome.org/sources/pango/1.14 ---> Verifying checksum(s) for pango ---> Extracting pango ---> Applying patches to pango ---> Configuring pango ---> Building pango with target all Error: Target com.apple.build returned: shell command "cd "/opt/ local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ dports_x11_pango/work/pango-1.14.3" && make all" returned error 2 Command output: /usr/bin/ld: warning -prebind has no effect with - bundle /usr/bin/ld: warning can't open dynamic library: /opt/local/lib/ libintl.3.dylib referenced from: /opt/local/lib/ libgobject-2.0.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) nmedit -s .libs/pango-thai-fc-symbols.expsym .libs/pango-thai-fc.so creating pango-thai-fc.la (cd .libs && rm -f pango-thai-fc.la && ln -s ../pango-thai-fc.la pango-thai-fc.la) Making all in tibetan if /bin/sh ../../libtool --tag=CC --mode=compile gcc - DHAVE_CONFIG_H -I. -I. -I../.. -DG_LOG_DOMAIN=\"Pango\" - DPANGO_ENABLE_ENGINE -DG_DISABLE_CAST_CHECKS -I../.. -I../../pango - D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/ include -I/opt/local/include -I/opt/local/include -I/opt/local/ include/freetype2 -I/opt/local/include -no-cpp-precomp -g -O2 - Wall -MT tibetan-fc.lo -MD -MP -MF ".deps/tibetan-fc.Tpo" -c -o tibetan-fc.lo tibetan-fc.c; \ then mv -f ".deps/tibetan-fc.Tpo" ".deps/tibetan-fc.Plo"; else rm - f ".deps/tibetan-fc.Tpo"; exit 1; fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I../.. -DG_LOG_DOMAIN=\"Pango\" - DPANGO_ENABLE_ENGINE -DG_DISABLE_CAST_CHECKS -I../.. -I../../pango - D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/ include -I/opt/local/include -I/opt/local/include -I/opt/local/ include/freetype2 -I/opt/local/include -no-cpp-precomp -g -O2 -Wall -MT tibetan-fc.lo -MD -MP -MF .deps/tibetan-fc.Tpo -c tibetan-fc.c -fno-common -DPIC -o .libs/tibetan-fc.o /bin/sh ../../libtool --tag=CC --mode=link gcc -g -O2 -Wall -no- undefined -bind_at_load -o pango-tibetan-fc.la -rpath /opt/local/ lib/pango/1.5.0/modules -module -export-dynamic -avoid-version - export-symbols-regex "^script_engine_.*" tibetan-fc.lo -L/opt/local/ lib -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl -liconv ../../ pango/libpango-1.0.la ../../pango/libpangoft2-1.0.la -L/opt/local/ lib -lfontconfig -L/opt/local/lib -lfreetype -lz generating symbol list for `pango-tibetan-fc.la' /usr/bin/nm -p .libs/tibetan-fc.o | sed -n -e 's/^.*[ ]\ ([BCDEGRST][BCDEGRST]*\)[ ][ ]*_\([_A-Za-z][_A-Za-z0-9]*\) $/\1 _\2 \2/p' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/pango- tibetan-fc.exp grep -E -e "^script_engine_.*" ".libs/pango-tibetan-fc.exp" > ".libs/pango-tibetan-fc.expT" mv -f ".libs/pango-tibetan-fc.expT" ".libs/pango-tibetan-fc.exp" sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < .libs/pango- tibetan-fc.exp > .libs/pango-tibetan-fc-symbols.expsym gcc -o .libs/pango-tibetan-fc.so -bundle .libs/tibetan-fc.o -L/ opt/local/lib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/ libgmodule-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/ lib/libintl.dylib /opt/local/lib/libiconv.dylib ../../pango/.libs/ libpango-1.0.dylib ../../pango/.libs/libpangoft2-1.0.dylib /opt/ local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ dports_x11_pango/work/pango-1.14.3/pango/.libs/libpango-1.0.dylib / opt/local/lib/libexpat.dylib /opt/local/lib/libz.dylib /opt/local/ lib/libfontconfig.dylib /opt/local/lib/libfreetype.dylib -lz /usr/bin/ld: warning -prebind has no effect with -bundle /usr/bin/ld: warning can't open dynamic library: /opt/local/lib/ libintl.3.dylib referenced from: /opt/local/lib/ libgobject-2.0.dylib (checking for undefined symbols may be affected) (No such file or directory, errno = 2) nmedit -s .libs/pango-tibetan-fc-symbols.expsym .libs/pango-tibetan- fc.so creating pango-tibetan-fc.la (cd .libs && rm -f pango-tibetan-fc.la && ln -s ../pango-tibetan- fc.la pango-tibetan-fc.la) Writing a pango.modules file to use with tests/examples. dyld: Library not loaded: /opt/local/lib/libintl.3.dylib Referenced from: /opt/local/lib/libgobject-2.0.0.dylib Reason: image not found make[3]: *** [pango.modules] Error 133 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2
---> Deactivating py-gobject 2.10.1_0 ---> Fetching py-gobject ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http:// ftp.rpmfind.net/linux/gnome.org/sources/pygobject/2.12/ ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http:// archive.progeny.com/GNOME/sources/pygobject/2.12/ ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http:// mirror.clarkson.edu/pub/gnome/sources/pygobject/2.12/ ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http:// mirror.aarnet.edu.au/pub/GNOME/sources/pygobject/2.12/ ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http:// www.download-ftp-center.com/mirrors/gnome.org/sources/pygobject/2.12/ ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http:// ftp.unina.it/pub/linux/GNOMEsources/pygobject/2.12/ ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http:// fr.rpmfind.net/linux/gnome.org/sources/pygobject/2.12/ ---> Attempting to fetch pygobject-2.12.1.tar.bz2 from http:// fr2.rpmfind.net/linux/gnome.org/sources/pygobject/2.12/ ---> Verifying checksum(s) for py-gobject ---> Extracting py-gobject ---> Configuring py-gobject Error: Target com.apple.configure returned: configure failure: shell command "cd "/opt/local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ dports_python_py-gobject/work/pygobject-2.12.1" && ./configure -- prefix=/opt/local" returned error 1 Command output: checking dynamic linker characteristics... darwin8.8.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool checking for a Python interpreter with version >= 2.3.5... python checking for python... /opt/local/bin/python checking for python version... 2.4 checking for python platform... darwin checking for python script directory... ${prefix}/lib/python2.4/ site-packages checking for python extension module directory... ${exec_prefix}/ lib/python2.4/site-packages checking for headers required to compile python extensions... found checking for xsltproc... /usr/bin/xsltproc checking for python module thread... yes checking whether to enable threading in pygobject... yes checking for pkg-config... /opt/local/bin/pkg-config checking for GLIB - version >= 2.8.0... no *** Could not run GLIB test program, checking why... *** The test program compiled, but did not run. This usually means *** that the run-time linker is not finding GLIB or finding the wrong *** version of GLIB. If it is not finding GLIB, you'll need to set your *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point *** to the installed location Also, make sure you have run ldconfig if that *** is required on your system *** *** If you have an old version installed, it is best to remove it, although *** you may also be able to get things to work by modifying LD_LIBRARY_PATH configure: error: maybe you want the pygobject-2-4 branch?
---> Activating gtk2 2.8.19_0+darwin_8 Error: Activating gtk2 2.8.19_0 failed: Image error: Another version of gtk2 (2.8.17_0+darwin_8) is already active. ---> Fetching libglade2 ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http:// ftp.rpmfind.net/linux/gnome.org/sources/libglade/2.6/ ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http:// archive.progeny.com/GNOME/sources/libglade/2.6/ ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http:// mirror.clarkson.edu/pub/gnome/sources/libglade/2.6/ ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http:// mirror.aarnet.edu.au/pub/GNOME/sources/libglade/2.6/ ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http:// www.download-ftp-center.com/mirrors/gnome.org/sources/libglade/2.6/ ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http:// ftp.unina.it/pub/linux/GNOMEsources/libglade/2.6/ ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http:// fr.rpmfind.net/linux/gnome.org/sources/libglade/2.6/ ---> Attempting to fetch libglade-2.6.0.tar.bz2 from http:// fr2.rpmfind.net/linux/gnome.org/sources/libglade/2.6/ ---> Verifying checksum(s) for libglade2 ---> Extracting libglade2 ---> Configuring libglade2 Error: Target com.apple.configure returned: configure failure: shell command "cd "/opt/local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ dports_gnome_libglade2/work/libglade-2.6.0" && CPPFLAGS="-L/opt/ local/lib -I/opt/local/include" ./configure --prefix=/opt/local -- mandir=/opt/local/share/man" returned error 1 Command output: checking dynamic linker characteristics... darwin8.8.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool checking for pkg-config... /opt/local/bin/pkg-config checking for GTK+ - version >= 2.5.0... no *** Could not run GTK+ test program, checking why... *** The test program failed to compile or link. See the file config.log for the *** exact error that occured. This usually means GTK+ is incorrectly installed. checking for gtk_plug_get_type... no checking for pkg-config... (cached) /opt/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBGLADE... configure: error: Package requirements ( libxml-2.0 >= 2.4.10 atk >= 1.9.0 gtk+-2.0 >= 2.5.0 glib-2.0 >= 2.5.0) were not met:
No package 'atk' found Package pango was not found in the pkg-config search path. Perhaps you should add the directory containing `pango.pc' to the PKG_CONFIG_PATH environment variable Package 'pango', required by 'GDK', not found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables LIBGLADE_CFLAGS and LIBGLADE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
---> Fetching py-cairo ---> Attempting to fetch pycairo-1.2.2.tar.gz from http:// cairographics.org/releases/ ---> Verifying checksum(s) for py-cairo ---> Extracting py-cairo ---> Configuring py-cairo ---> Building py-cairo with target all ---> Staging py-cairo into destroot ---> Packaging tgz archive for py-cairo 1.2.2_0 ---> Installing py-cairo 1.2.2_0 ---> Activating py-cairo 1.2.2_0 ---> Cleaning py-cairo ---> Activating py-gobject 2.10.1_0 ---> Deactivating py-gobject 2.10.1_0 ---> Configuring py-gobject Error: Target com.apple.configure returned: configure failure: shell command "cd "/opt/local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ dports_python_py-gobject/work/pygobject-2.12.1" && ./configure -- prefix=/opt/local" returned error 1 Command output: checking dynamic linker characteristics... darwin8.8.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool checking for a Python interpreter with version >= 2.3.5... python checking for python... /opt/local/bin/python checking for python version... 2.4 checking for python platform... darwin checking for python script directory... ${prefix}/lib/python2.4/ site-packages checking for python extension module directory... ${exec_prefix}/ lib/python2.4/site-packages checking for headers required to compile python extensions... found checking for xsltproc... /usr/bin/xsltproc checking for python module thread... yes checking whether to enable threading in pygobject... yes checking for pkg-config... /opt/local/bin/pkg-config checking for GLIB - version >= 2.8.0... no *** Could not run GLIB test program, checking why... *** The test program compiled, but did not run. This usually means *** that the run-time linker is not finding GLIB or finding the wrong *** version of GLIB. If it is not finding GLIB, you'll need to set your *** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point *** to the installed location Also, make sure you have run ldconfig if that *** is required on your system *** *** If you have an old version installed, it is best to remove it, although *** you may also be able to get things to work by modifying LD_LIBRARY_PATH configure: error: maybe you want the pygobject-2-4 branch?
---> Deactivating py-gtk2 2.8.6_0 ---> Configuring libglade2 Error: Target com.apple.configure returned: configure failure: shell command "cd "/opt/local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_ dports_gnome_libglade2/work/libglade-2.6.0" && CPPFLAGS="-L/opt/ local/lib -I/opt/local/include" ./configure --prefix=/opt/local -- mandir=/opt/local/share/man" returned error 1 Command output: checking dynamic linker characteristics... darwin8.8.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool checking for pkg-config... /opt/local/bin/pkg-config checking for GTK+ - version >= 2.5.0... no *** Could not run GTK+ test program, checking why... *** The test program failed to compile or link. See the file config.log for the *** exact error that occured. This usually means GTK+ is incorrectly installed. checking for gtk_plug_get_type... no checking for pkg-config... (cached) /opt/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBGLADE... configure: error: Package requirements ( libxml-2.0 >= 2.4.10 atk >= 1.9.0 gtk+-2.0 >= 2.5.0 glib-2.0 >= 2.5.0) were not met:
No package 'atk' found Package pango was not found in the pkg-config search path. Perhaps you should add the directory containing `pango.pc' to the PKG_CONFIG_PATH environment variable Package 'pango', required by 'GDK', not found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables LIBGLADE_CFLAGS and LIBGLADE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
Error: The following dependencies failed to build: libglade2 ---> Deactivating tiff 3.8.0_0+darwin_8 ---> Fetching tiff ---> Attempting to fetch tiff-3.8.2.tar.gz from ftp:// ftp.remotesensing.org/pub/libtiff/ ---> Verifying checksum(s) for tiff ---> Extracting tiff ---> Configuring tiff ---> Building tiff with target all ---> Staging tiff into destroot ---> Packaging tgz archive for tiff 3.8.2_0+darwin_8 ---> Installing tiff 3.8.2_0+darwin_8 ---> Activating tiff 3.8.2_0+darwin_8 ---> Cleaning tiff owerbook-g4-12-di-epifanio:~ epifanio$
then i tryed to run GGOBI, but now it fails!
powerbook-g4-12-di-epifanio:~ epifanio$ ggobi dyld: Library not loaded: /opt/local/lib/libatk-1.0.0.dylib Referenced from: /usr/local/bin/ggobi Reason: image not found Trace/BPT trap powerbook-g4-12-di-epifanio:~ epifanio$
Il giorno 10/nov/06, alle ore 13:12, Randall Wood ha scritto:
At this point, we should step back and try:
sudo port sync; sudo port upgrade outdated
and then try cleaning and installing gtk2 again. It seems that you have a number of older ports on your system that need to be updated before installing gtk2.
If you begin getting strange "libintl not found" type messages, see http://trac.macosforge.org/projects/macports/wiki/ProblemHotlist
On 10 Nov 2006, at 07:07, massimodisasha wrote:
thanks for your help!!!
now i've:
powerbook-g4-12-di-epifanio:~ epifanio$ sudo port clean --all gtk2 Password: ---> Cleaning gtk2 powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install gtk2 ---> Fetching gtk2 ---> Attempting to fetch gtk+-2.10.6.tar.bz2 from ftp:// ftp.gtk.org/pub/gtk/v2.10 ---> Verifying checksum(s) for gtk2 ---> Extracting gtk2 ---> Configuring gtk2 Error: Target com.apple.configure returned: configure failure: shell command "cd "/opt/local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdat e_dports_x11_gtk2/work/gtk+-2.10.6" && LDFLAGS="-L/opt/local/lib - lpango-1.0" CPPFLAGS="-I/opt/local/include -no-cpp-precomp - DX_LOCALE" CFLAGS="-O3 -funroll-loops -fstrict-aliasing" ./ configure --prefix=/opt/local --disable-shm --disable-gtk-doc -- with-included-loaders --mandir=/opt/local/share/man" returned error 1 Command output: checking if g++ static flag -static works... no checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin8.8.0 dyld checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for _LARGE_FILES value needed for large files... no checking for nm... /usr/bin/nm -p checking whether to enable maintainer-specific portions of Makefiles... no checking for some Win32 platform... no checking whether build environment is sane... yes checking for strerror in -lcposix... no checking for gcc option to accept ANSI C... none needed checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... (cached) yes checking for pkg-config... /opt/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for BASE_DEPENDENCIES... configure: error: Package requirements (glib-2.0 >= 2.12.0 atk >= 1.9.0 pango >= 1.12.0 cairo >= 1.2.0) were not met:
Requested 'cairo >= 1.2.0' but version of cairo is 1.0.4
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables BASE_DEPENDENCIES_CFLAGS and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
Error: Status 1 encountered during processing. powerbook-g4-12-di-epifanio:~ epifanio$
Il giorno 10/nov/06, alle ore 12:49, Randall Wood ha scritto:
At this point, it seems we are suffering from the prior failure to build gtk2, so try:
sudo port clean --all gtk2; sudo port install gtk2
On 10 Nov 2006, at 06:52, massimodisasha wrote:
i've tryed:
Last login: Fri Nov 10 08:36:08 on ttyp2 Welcome to Darwin! powerbook-g4-12-di-epifanio:~ epifanio$ sudo port deactivate glib2 ---> Deactivating glib2 powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install glib2---> Activating glib2 2.12.4_0---> Cleaning glib2powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install gtk2 ---> Configuring gtk2 Error: Target com.apple.configure returned: configure failure: shell command "cd "/opt/local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupd ate_dports_x11_gtk2/work/gtk+-2.10.6" && LDFLAGS="-L/opt/local/ lib -lpango-1.0" CPPFLAGS="-I/opt/local/include -no-cpp-precomp -DX_LOCALE" CFLAGS="-O3 -funroll-loops -fstrict-aliasing" ./ configure --prefix=/opt/local --disable-shm --disable-gtk-doc -- with-included-loaders --mandir=/opt/local/share/man" returned error 1 Command output: sh: line 1: cd: /opt/local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupd ate_dports_x11_gtk2/work/gtk+-2.10.6: No such file or directory
Error: Status 1 encountered during processing. powerbook-g4-12-di-epifanio:~ epifanio$
Il giorno 10/nov/06, alle ore 12:44, Randall Wood ha scritto:
Try then "sudo port deactivate glib2; sudo port install glib2"
On 10 Nov 2006, at 06:47, massimodisasha wrote:
> i've tryed, but i've this: > > powerbook-g4-12-di-epifanio:~ epifanio$ sudo port upgrade glib2 > Password: > ---> Activating glib2 2.12.4_0 > Error: Activating glib2 2.12.4_0 failed: Image error: Another > version of glib2 (2.10.2_0) is already active. > powerbook-g4-12-di-epifanio:~ epifanio$ > > Il giorno 10/nov/06, alle ore 12:36, Randall Wood ha scritto: > >> Try "sudo port upgrade glib2" and then try installing gtk2. >> >> On 10 Nov 2006, at 06:14, massimodisasha wrote: >> >>> hi, >>> i'm trying to install GTK2 with "darwinports" >>> but i've some problems: >>> when i try to do: >>> sudo port install gtk2 >>> i've this error: >>>>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install >>>>> gtk2 >>>>> Password: >>>>> Portfile changed since last build; discarding previous >>>>> state. >>>>> ---> Fetching gtk2 >>>>> ---> Attempting to fetch gtk+-2.10.3.tar.bz2 from ftp:// >>>>> ftp.gtk.org/ >>>>> pub/gtk/v2.10 >>>>> ---> Verifying checksum(s) for gtk2 >>>>> ---> Extracting gtk2 >>>>> ---> Configuring gtk2 >>>>> Error: Target com.apple.configure returned: configure >>>>> failure: shell >>>>> command "cd "/opt/local/var/db/dports/build/ >>>>> _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org >>>>> _dpupdate_dp >>>>> orts_x11_gtk2/work/gtk+-2.10.3" && LDFLAGS="-L/opt/local/ >>>>> lib - >>>>> lpango-1.0" CPPFLAGS="-I/opt/local/include -no-cpp-precomp - >>>>> DX_LOCALE" CFLAGS="-O3 -funroll-loops -fstrict- >>>>> aliasing" ./configure >>>>> --prefix=/opt/local --disable-shm --disable-gtk-doc -- >>>>> with-included- >>>>> loaders --mandir=/opt/local/share/man" returned error 1 >>>>> Command output: checking if the linker (/usr/bin/ld) is >>>>> GNU ld... no >>>>> checking whether the g++ linker (/usr/bin/ld) supports >>>>> shared >>>>> libraries... yes >>>>> checking for g++ option to produce PIC... -fno-common >>>>> checking if g++ PIC flag -fno-common works... yes >>>>> checking if g++ supports -c -o file.o... yes >>>>> checking whether the g++ linker (/usr/bin/ld) supports >>>>> shared >>>>> libraries... yes >>>>> checking dynamic linker characteristics... darwin8.8.0 dyld >>>>> checking how to hardcode library paths into programs... >>>>> immediate >>>>> checking whether stripping libraries is possible... yes >>>>> appending configuration tag "F77" to libtool >>>>> checking for special C compiler options needed for large >>>>> files... no >>>>> checking for _FILE_OFFSET_BITS value needed for large >>>>> files... no >>>>> checking for _LARGE_FILES value needed for large files... no >>>>> checking for nm... /usr/bin/nm -p >>>>> checking whether to enable maintainer-specific portions of >>>>> Makefiles... no >>>>> checking for some Win32 platform... no >>>>> checking whether build environment is sane... yes >>>>> checking for strerror in -lcposix... no >>>>> checking for gcc option to accept ANSI C... none needed >>>>> checking for a BSD-compatible install... /usr/bin/install -c >>>>> checking whether make sets $(MAKE)... (cached) yes >>>>> checking for pkg-config... /opt/local/bin/pkg-config >>>>> checking pkg-config is at least version 0.9.0... yes >>>>> checking for BASE_DEPENDENCIES... configure: error: Package >>>>> requirements (glib-2.0 >= 2.12.0 atk >= 1.9.0 pango >= >>>>> 1.12.0 cairo >= 1.2.0) were not met. >>>>> Consider adjusting the PKG_CONFIG_PATH environment >>>>> variable if you >>>>> installed software in a non-standard prefix. >>>>> >>>>> Alternatively you may set the BASE_DEPENDENCIES_CFLAGS and >>>>> BASE_DEPENDENCIES_LIBS environment variables >>>>> to avoid the need to call pkg-config. See the pkg-config >>>>> man page for >>>>> more details. >>>>> >>>>> Error: Status 1 encountered during processing. >>>>> powerbook-g4-12-di-epifanio:~ epifanio$ >>> >>> >>> i've tryed to update "glib" >>> but: >>> powerbook-g4-12-di-epifanio:~ epifanio$ sudo port install >>> glib2 >>> Portfile changed since last build; discarding previous state. >>> ---> Fetching glib2 >>> ---> Attempting to fetch glib-2.12.4.tar.bz2 from ftp:// >>> ftp.gtk.org/pub/gtk/v2.12 >>> ........... >>> ---> Verifying checksum(s) for glib2 >>> ---> Extracting glib2 >>> ---> Applying patches to glib2 >>> ---> Configuring glib2 >>> ---> Building glib2 with target all >>> ---> Staging glib2 into destroot >>> ---> Packaging tgz archive for glib2 2.12.4_0 >>> ---> Installing glib2 2.12.4_0 >>> ---> Activating glib2 2.12.4_0 >>> Error: Target com.apple.activate returned: Image error: >>> Another version of glib2 (2.10.2_0) is already active. >>> Error: Status 1 encountered during processing. >>> >>> how can i do??? >>> >>> i must update to GTK2 >>> beacouse it is a dependence for an R-Cran package (RGTK2, >>> Rggobi) >>> >>> can you help me? >>> very thanks! >>> Massimo >>> _______________________________________________ >>> macports-users mailing list >>> macports-users@lists.macosforge.org >>> http://lists.macosforge.org/mailman/listinfo/macports-users >> >> >> Randall Wood >> rhwood@mac.com >> >> "The rules are simple: The ball is round. The game lasts 90 >> minutes. All the >> rest is just philosophy." >> >> >
Randall Wood rhwood@mac.com
"The rules are simple: The ball is round. The game lasts 90 minutes. All the rest is just philosophy."
Randall Wood rhwood@mac.com
"The rules are simple: The ball is round. The game lasts 90 minutes. All the rest is just philosophy."
Randall Wood rhwood@mac.com
"The rules are simple: The ball is round. The game lasts 90 minutes. All the rest is just philosophy."
Randall Wood rhwood@mac.com "The rules are simple: The ball is round. The game lasts 90 minutes. All the rest is just philosophy."
participants (1)
-
Randall Wood