November 2008 - Xquartz-dev - lists.macosforge.org

Re: [Xquartz-dev] geometry regression in 2.3.2-beta3
by Peter Dyballa 18 Nov '08

18 Nov '08

Am 18.11.2008 um 06:05 schrieb Tom Lane: > (add-hook 'term-setup-hook #'(lambda () (menu-bar-mode -1))) > (add-hook 'term-setup-hook #'(lambda () (tool-bar-mode -1))) > > I'm not sure if this is still considered the optimal way to disable > menu/toolbar stuff, but it's what I've been using for awhile. (menu-bar-mode 0) (tool-bar-mode 0) should be sufficient. If these are meant for a situation without a windowing system you can put them into a clause that applies when the window-system is nil. -- Greetings Pete It's not the valleys in life I dread so much as the dips. – Garfield

1 0

meta keys with 2.3.2-beta3
by Cameron Simpson 18 Nov '08

18 Nov '08

When I start 2.3.2-beta3 The Meta_L and Meta_R keys are listed against both the mod1 and mod2 modifiers. I've added: echo clear mod2 | xmodmap - to my startup and I can happily use Command as mod1. Has anyone else noticed this? -- Cameron Simpson <cs(a)zip.com.au> DoD#743 http://www.cskk.ezoshosting.com/cs/ A good catchword can obscure analysis for fifty years.

2 4

Re: [Xquartz-dev] 2.3.2_beta3 on Tiger in X11R7.2
by Peter Dyballa 17 Nov '08

17 Nov '08

Am 17.11.2008 um 13:55 schrieb Jeremy Huddleston: > Ok... try changing the two <availability.h>s to <AvailabilityMacros.h> (A #ifdef Mac OS X is coming?) After this correction compilation now stops here: X11Controller.m: In function '-[X11Controller install_window_menu:]': X11Controller.m:156: error: 'NSUInteger' undeclared (first use in this function) X11Controller.m:156: error: (Each undeclared identifier is reported only once X11Controller.m:156: error: for each function it appears in.) X11Controller.m:156: error: parse error before ']' token X11Controller.m:166: error: parse error before ']' token The same data type is also used in: ./xserver/hw/xquartz/pbproxy/x-selection.m:664: NSUInteger length; ./xserver/hw/xquartz/pbproxy/x-selection.m:829: NSUInteger length; ./xserver/hw/xquartz/pbproxy/x-selection.m:880: NSUInteger length; ./xserver/hw/xquartz/pbproxy/x-selection.m:1196: NSUInteger length; -- Greetings Pete Never be led astray onto the path of virtue

2 1

Re: [Xquartz-dev] 2.3.2_beta3 on Tiger
by Peter Dyballa 17 Nov '08

17 Nov '08

Am 16.11.2008 um 03:44 schrieb Peter Dyballa: >> http://static.macosforge.org/xquartz/downloads/X11-2.3.2_beta3.pkg > > Jeremy, > > I managed to compile XDarwin on Tiger (10.4.11)! It even runs – > although the build shows errors for xserver: Jeremy, I was mixing up things! The error I reported happened in X11R7.2, on which I still can't compile X11.app and to which I applied your patch. The new X11.app I *could* compile happened in X11R7.1, to which I did not pay much attention, were just trying to answer your questions to my bug reports – after having updated the code basis. It's a bit surprising that -DXSERVER_VERSION=\"1.5.99.1\" stands for the last beta version, I would have assumed to find it in at least X11R7.2, not in X11R7.1. I'm going to make distclean and update X11R7.1 via git again and re-compile. And then check the output from the build process. -- Greetings Pete They're putting dimes in the hole in my head to see the change in me.

2 1

Re: [Xquartz-dev] 2.3.2_beta3
by Peter Dyballa 16 Nov '08

16 Nov '08

Am 16.11.2008 um 03:44 schrieb Jeremy Huddleston: > Name: tiger-kl.patch It removes the errors reported – and adds this one: X11Application.m:50:23: error: available.h: No such file or directory (No updated X11.app was built.) Will an update via git still work or remove the patch? -- Greetings <] Pete o __o |__ o recumbo ___o /I -\<, |o \ -\),-% ergo sum! ___/\ /\___./ \___...O/ O____.....`-O-'-()--o_________________

2 1

Re: [Xquartz-dev] 2.3.2_beta3
by Peter Dyballa 16 Nov '08

16 Nov '08

Am 16.11.2008 um 16:00 schrieb Jeremy Huddleston: > Whoops... I just noticed this in the patch... you should undo that > change. > - last_key_layout = key_layout; > CFRelease(clear); > + last_key_layout = key_layout; Right now I have in X11Application.m: 1030 if(darwinSyncKeymap) { 1031 #if MAC_OS_X_VERSION_MIN_REQUIRED >= 1050 1032 TISInputSourceRef key_layout = TISCopyCurrentKeyboardLayoutInputSource(); 1033 TISInputSourceRef clear; 1034 if (CFEqual(key_layout, last_key_layout)) { 1035 CFRelease(key_layout); 1036 } else { 1037 /* Swap/free thread-safely */ 1038 clear = last_key_layout; 1039 CFRelease(clear); 1040 last_key_layout = key_layout; 1041 #else 1042 KeyboardLayoutRef key_layout; 1043 KLGetCurrentKeyboardLayout(&key_layout); 1044 if(key_layout != last_key_layout) { 1045 last_key_layout = key_layout; 1046 #endif and I should move line #1040 before line #1039, as it was before? (Anyway, since MAC_OS_X_VERSION_MIN_REQUIRED is for me probably 1040 it would not make a difference for me right now, and Leopard might arrive at Christmas.) -- Greetings Pete "Evolution" o __o _o _ °\___o /0~ -\<, ^\___ /=\\_/-% oo~_______ /\ /\______/ \_________O/ O_______________o===>-->O--o____

1 0

Re: [Xquartz-dev] 2.3.2_beta3
by Peter Dyballa 16 Nov '08

16 Nov '08

Am 11.11.2008 um 20:22 schrieb Jeremy Huddleston: > http://static.macosforge.org/xquartz/downloads/X11-2.3.2_beta3.pkg Jeremy, I managed to compile XDarwin on Tiger (10.4.11)! It even runs – although the build shows errors for xserver: mv -f miinitext.o .libs/miinitext.o mv -f .deps/miinitext.Tpo .deps/miinitext.Plo source='X11Application.m' object='X11Application.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/sh ../../depcomp \ /bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. - I../../include -DBUILD_DATE=\"20081110\" -DXSERVER_VERSION=\"1.5.99.1 \" -DINXQUARTZ -DUSE_NEW_CLUT -DXFree86Server -I../../miext/rootless - v -no-cpp-precomp -I/usr/include/openssl -I/sw/include/pango-1.0 -I/ sw/lib/freetype219/include -I/sw/lib/freetype219/include/freetype2 -I/ sw/include/libpng12 -I/sw/include -I/usr/local/include - DHAVE_DIX_CONFIG_H -Wall -Wpointer-arith -Wstrict-prototypes - Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno- strict-aliasing -I/sw/lib/freetype219/include/freetype2 -I/sw/lib/ freetype219/include -I/sw/lib/system-openssl/include -I/usr/X11R7.2/ include -I/usr/X11R7.2/include/pixman-1 -D_BSD_SOURCE -DHAS_FCHOWN - DHAS_STICKY_DIR_BIT -I../../include -I../../include -I../../Xext - I../../damageext -I../../xfixes -I../../Xi -I../../mi -I../../miext/ shadow -I../../miext/damage -I../../render -I../../randr -I../../fb - v -pipe -fPIC -O0 -mcpu=7450 -mtune=7450 -fno-common - DROOTLESS_WORKAROUND -DNO_ALLOCA -c -o X11Application.lo X11Application.m gcc -DHAVE_CONFIG_H -I. -I../../include -DBUILD_DATE=\"20081110\" - DXSERVER_VERSION=\"1.5.99.1\" -DINXQUARTZ -DUSE_NEW_CLUT - DXFree86Server -I../../miext/rootless -v -no-cpp-precomp -I/usr/ include/openssl -I/sw/include/pango-1.0 -I/sw/lib/freetype219/include -I/sw/lib/freetype219/include/freetype2 -I/sw/include/libpng12 -I/sw/ include -I/usr/local/include -DHAVE_DIX_CONFIG_H -Wall -Wpointer- arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -I/sw/lib/freetype219/include/ freetype2 -I/sw/lib/freetype219/include -I/sw/lib/system-openssl/ include -I/usr/X11R7.2/include -I/usr/X11R7.2/include/pixman-1 - D_BSD_SOURCE -DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -I../../include - I../../include -I../../Xext -I../../damageext -I../../xfixes -I../../ Xi -I../../mi -I../../miext/shadow -I../../miext/damage -I../../ render -I../../randr -I../../fb -v -pipe -fPIC -O0 -mcpu=7450 - mtune=7450 -fno-common -DROOTLESS_WORKAROUND -DNO_ALLOCA -c X11Application.m -DPIC Using built-in specs. Target: powerpc-apple-darwin8 Configured with: /var/tmp/gcc/gcc-5370~2/src/configure --disable- checking -enable-werror --prefix=/usr --mandir=/share/man --enable- languages=c,objc,c++,obj-c++ --program-transform-name=/^[cg][^.-]*$/s/ $/-4.0/ --with-gxx-include-dir=/include/c++/4.0.0 --with-slibdir=/usr/ lib --build=powerpc-apple-darwin8 --host=powerpc-apple-darwin8 -- target=powerpc-apple-darwin8 Thread model: posix gcc version 4.0.1 (Apple Computer, Inc. build 5370) /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/cc1obj -quiet -v -v - I. -I../../include -I../../miext/rootless -I/usr/include/openssl -I/ sw/include/pango-1.0 -I/sw/lib/freetype219/include -I/sw/lib/ freetype219/include/freetype2 -I/sw/include/libpng12 -I/sw/include -I/ usr/local/include -I/sw/lib/freetype219/include/freetype2 -I/sw/lib/ freetype219/include -I/sw/lib/system-openssl/include -I/usr/X11R7.2/ include -I/usr/X11R7.2/include/pixman-1 -I../../include -I../../ include -I../../Xext -I../../damageext -I../../xfixes -I../../Xi - I../../mi -I../../miext/shadow -I../../miext/damage -I../../render - I../../randr -I../../fb -D__DYNAMIC__ -DHAVE_CONFIG_H - DBUILD_DATE="20081110" -DXSERVER_VERSION="1.5.99.1" -DINXQUARTZ - DUSE_NEW_CLUT -DXFree86Server -DHAVE_DIX_CONFIG_H -D_BSD_SOURCE - DHAS_FCHOWN -DHAS_STICKY_DIR_BIT -DROOTLESS_WORKAROUND -DNO_ALLOCA - DPIC X11Application.m -fPIC -quiet -dumpbase X11Application.m - mmacosx-version-min=10.3 -mcpu=7450 -mtune=7450 -auxbase X11Application -O0 -Wall -Wpointer-arith -Wstrict-prototypes - Wmissing-prototypes -Wmissing-declarations -Wnested-externs -version - fno-strict-aliasing -fPIC -fno-common -o - | /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/as -arch ppc -o X11Application.o ignoring nonexistent directory "/usr/lib/gcc/powerpc-apple- darwin8/4.0.1/../../../../powerpc-apple-darwin8/include" ignoring duplicate directory "/usr/local/include" as it is a non-system directory that duplicates a system directory ignoring duplicate directory "/sw/lib/freetype219/include/freetype2" ignoring duplicate directory "/sw/lib/freetype219/include" ignoring duplicate directory "../../include" ignoring duplicate directory "../../include" #include "..." search starts here: #include <...> search starts here: . ../../include ../../miext/rootless /usr/include/openssl /sw/include/pango-1.0 /sw/lib/freetype219/include /sw/lib/freetype219/include/freetype2 /sw/include/libpng12 /sw/include /sw/lib/system-openssl/include /usr/X11R7.2/include /usr/X11R7.2/include/pixman-1 ../../Xext ../../damageext ../../xfixes ../../Xi ../../mi ../../miext/shadow ../../miext/damage ../../render ../../randr ../../fb /usr/local/include /usr/lib/gcc/powerpc-apple-darwin8/4.0.1/include /usr/include /System/Library/Frameworks /Library/Frameworks End of search list. GNU Objective-C version 4.0.1 (Apple Computer, Inc. build 5370) (powerpc-apple-darwin8) compiled by GNU C version 4.0.1 (Apple Computer, Inc. build 5370). GGC heuristics: --param ggc-min-expand=100 --param ggc-min- heapsize=131072 Compiler executable checksum: 85eae8b3994a6726b58c638178e53f17 X11Application.m:65: error: parse error before ‘last_key_layout’ X11Application.m:65: warning: type defaults to ‘int’ in declaration of ‘last_key_layout’ X11Application.m:65: warning: data definition has no type or storage class X11Application.m: In function ‘X11ApplicationMain’: X11Application.m:842: warning: implicit declaration of function ‘TISCopyCurrentKeyboardLayoutInputSource’ X11Application.m:842: warning: nested extern declaration of ‘TISCopyCurrentKeyboardLayoutInputSource’ X11Application.m: In function ‘send_nsevent’: X11Application.m:1021: error: ‘TISInputSourceRef’ undeclared (first use in this function) X11Application.m:1021: error: (Each undeclared identifier is reported only once X11Application.m:1021: error: for each function it appears in.) X11Application.m:1021: error: parse error before ‘key_layout’ X11Application.m:1023: error: ‘key_layout’ undeclared (first use in this function) X11Application.m:1023: warning: passing argument 2 of ‘CFEqual’ makes pointer from integer without a cast X11Application.m:1027: error: ‘clear’ undeclared (first use in this function) make[3]: *** [X11Application.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all-recursive] Error 1 I looged off yesterday (too mann GB of swap) and was surprised with a new symbol in Dock! (The items build_driver_input and build_driver_video in build.sh seem to be useless in Mac OS X.) Congratulations! -- Greetings Pete Got Mole problems? Call Avogadro 6.02 x 10^23

3 2

Re: [Xquartz-dev] computer going to sleep error
by Peter Dyballa 15 Nov '08

15 Nov '08

Am 11.11.2008 um 20:22 schrieb Gideon Simpson: > Has anyone else found that when they put the computer to sleep and > come back to it, Xquartz doesn't quite work and may need to be > restarted? I found the reason this behaviour (now that I could compile XDarwin 2.3.2_beta3): it's a preference that was introduced into Tiger at the end of 2006 with an X11 update: when the local IP address changes the old X authority is rejected. What I don't understand is why the unchanged 127.0.0.1 or ::1 address falls into the same category ... -- Greetings Pete November, n.: The eleventh twelfth of a weariness. – Ambrose Bierce, "The Devil's Dictionary"

1 0

Re: [Xquartz-dev] Can't install beta3 package
by Jeremy Huddleston 13 Nov '08

13 Nov '08

Check the md5sum of the package against the one on the server. On Nov 13, 2008, at 01:17, Andrea D'Amore wrote: > Hello, > when trying to install 2.3.2_beta3 package Installer.app remains > stuck at "Configuring Installation", in log window there is: > > Nov 13 09:47:52 ibook installdb[4884]: Opened receipt database on > '/' with schema 17. > Nov 13 09:47:53 ibook Installer[4873]: Starting installation: > Nov 13 09:47:53 ibook Installer[4873]: Preparing volume "Macintosh > HD" for installation > Nov 13 09:47:53 ibook Installer[4873]: Configuring volume "Macintosh > HD" > Nov 13 09:47:54 ibook Installer[4873]: Preparing disk for local > booted install. > Nov 13 09:47:54 ibook Installer[4873]: Free space on "Macintosh HD": > 6,6 GB (7077974016 bytes). > Nov 13 09:47:54 ibook Installer[4873]: Create temporary directory "/ > private/tmp/X11-2.3.2_beta3.pkg.4873fwNRyj" > Nov 13 09:47:54 ibook Installer[4873]: Running install actions > Nov 13 09:47:54 ibook Installer[4873]: Processing x11: > Nov 13 09:47:54 ibook Installer[4873]: Determining files to install > Nov 13 09:48:09 ibook Installer[4873]: It took 14.58 seconds to > create the install plan for x11. > Nov 13 09:48:09 ibook Installer[4873]: Configuring deferred files > Nov 13 09:48:09 ibook Installer[4873]: Determining obsolete files > Nov 13 09:48:34 ibook Installer[4873]: Assembling temporary receipt > Nov 13 09:48:34 ibook Installer[4873]: Performing pre-extraction > actions > Nov 13 09:48:35 ibook Installer[4873]: run preupgrade script for x11 > Nov 13 09:58:36 ibook installdb[4884]: idle 10 min with 1 open > connection. > > > > This is only one attempt, I tried for more than an hour, every 10 > minutes last line is updated with actual time, i.e. "idle 20 min" > "idle 30 min" and so on. > > I'm on G4 ppc, 10.5.5 and I'm currently running beta2, I tried > rebooting and disabling extension (InputManagers) but had no luck. > > Any hint?_______________________________________________ > Do not post admin requests to the list. They will be ignored. > X11-users mailing list (X11-users(a)lists.apple.com) > Help/Unsubscribe/Update your Subscription: http://lists.apple.com/mailman/options/x11-users/jeremyhu%40freedesktop.org > > This email sent to jeremyhu(a)freedesktop.org

1 0

missing localization in 2.3.2_beta3
by Sven de Vries 12 Nov '08

12 Nov '08

Hi, > It's not localized, so you need to set your locality to US. thanks for the quick answer (I hoped, in that case it would just show the US-version). Is there a way to set the locality just for X11 and nothing else? What settings does it take to have cut-and-paste-behavior similar to the earlier versions? best sven

1 0