[darwinbuild-dev] Build errors build xnu 9E17
websrvr
websrvr at macftphttp.serverbox.org
Thu Sep 11 22:00:31 PDT 2008
This has already been filed and is a missing root dependancy issue.
On Sep 11, 2008, at 16:11 PM, Clark, Bob (Mission Systems) wrote:
> I am attempting to build 9E17 xnu and receive the following error:
>
> Log file excepts
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++
> BUILDING xnu-1228.5.20~1 on Mon Sep 8 20:57:13 PDT 2008
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++
> Build configuration:
> Build host: Vakama-Tahu.local
> Build tool: make
> Build action: install
> Build number: 9E17
> Host kernel version: Darwin Kernel Version 9.4.0: Mon Jun 9
> 19:36:17 PDT 2008; root:xnu-1228.5.20~1/RELEASE_PPC
> cc version: gcc version 4.0.1 (Apple Inc. build 5465)
> cctools version: version cctools-667.3.obj, GNU assembler
> version 1.38
> make version: GNU Make 3.81
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++
>
> ...
>
> DSYMUTIL mach_kernel.sys
> if [ 1 -eq 1 ]; then \
> /usr/bin/dsymutil --arch=ppc /private/var/tmp/xnu/
> xnu-1228.5.20.obj/RELEASE_PPC/./mach_kernel.sys -o /private/var/tmp/
> xnu/xnu-1228.5.20.obj/RELEASE_PPC/./mach_kernel.sys.dSYM > /dev/
> null; \
> fi;
> /bin/sh: line 1: 48897 Segmentation fault /usr/bin/dsymutil --
> arch=ppc /private/var/tmp/xnu/xnu-1228.5.20.obj/RELEASE_PPC/./
> mach_kernel.sys -o /private/var/tmp/xnu/xnu-1228.5.20.obj/
> RELEASE_PPC/./mach_kernel.sys.dSYM > /dev/null
> make[2]: *** [do_build_mach_kernel] Error 139
> make[1]: *** [build_all] Error 2
> make: *** [all] Error 2
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++
> BUILD TIME: 0h 18m 14s
> EXIT STATUS: 2
>
>
> Here is my build environment
>
> Mach kernel version:
> Darwin Kernel Version 9.4.0: Mon Jun 9 19:36:17 PDT 2008;
> root:xnu-1228.5.20~1/RELEASE_PPC
> Kernel configured for a single processor only.
> 1 processor is physically available.
> 1 processor is logically available.
> Processor type: ppc7450 (PowerPC 7450)
> Processor active: 0
> Primary memory available: 1.00 gigabytes
> Default processor set: 69 tasks, 245 threads, 1 processors
> Load average: 0.93, Mach factor: 0.67
> Hardware:
>
> Hardware Overview:
>
> Model Name: PowerBook G4 15"
> Model Identifier: PowerBook5,6
> Processor Name: PowerPC G4 (1.2)
> Processor Speed: 1.5 GHz
> Number Of CPUs: 1
> L2 Cache (per CPU): 512 KB
> Memory: 1 GB
> Bus Speed: 167 MHz
> Boot ROM Version: 4.9.1f1
> Serial Number: W852107USQ6
> Sudden Motion Sensor:
> State: Enabled
> Version: 1.0
>
> I am using Xcode 3.1 and here are the commands I used:
>
> Vakama-Tahu:darwinbuild build$ svn co http://svn.macosforge.org/
> repository/darwinbuild/trunk darwinbuild
> Vakama-Tahu:darwinbuild build$ cd darwinbuild/
> Vakama-Tahu:darwinbuild build$ make
> Vakama-Tahu:darwinbuild build$ sudo make install
> Vakama-Tahu:darwinbuild build$ mkdir 9E17
> Vakama-Tahu:darwinbuild build$ sudo darwinbuild -init 9E17
> Vakama-Tahu:darwinbuild build$ darwinxref -b 9E17 version '*'
> Vakama-Tahu:darwinbuild build$ sudo /usr/local/share/darwinbuild/
> installXcode ./BuildRoot
> Vakama-Tahu:darwinbuild build$ sudo darwinbuild -load CF
> Vakama-Tahu:darwinbuild build$ sudo darwinbuild xnu
>
>
> Bob Clark
>
>
> _______________________________________________
> darwinbuild-dev mailing list
> darwinbuild-dev at lists.macosforge.org
> http://lists.macosforge.org/mailman/listinfo.cgi/darwinbuild-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.macosforge.org/pipermail/darwinbuild-dev/attachments/20080912/4c462ac0/attachment.html
More information about the darwinbuild-dev
mailing list