[launchd-dev] A few pointers at a launchd script

[Panagiotis Atmatzidis]

Hello,

On 13 Νοε 2009, at 7:52 μ.μ., Brent Gulanowski wrote:

> OnDemand has been replaced with KeepAlive, which can be a boolean  
> (inverse of what OnDemand would be) or a dictionary. So I think you  
> should remove the OnDemand and RunAtLoad keys and replace them with:
>
> <key>KeepAlive</key>
> <dictionary>
> <NetworkState><true/>
> </dictionary>
>
> In any case, the NetworkState key is not meaningful except in a  
> KeepAlive dictionary, based on my reading of the man page for  
> launchd.plist.


Thanks for pointing that out. I'll take a look when I have the time  
and change it.

>
>
> On Fri, Oct 30, 2009 at 5:31 PM, Panagiotis Atmatzidis <atma at convalesco.org 
> > wrote:
> I'm forwarding a message that I posted a few minutes ago at users- 
> macports ML because I just found this mailing list and I think that  
> it's more apropriate... (and a good one to keep an eye to avoid  
> launchd adventures..)
>
> --
> Greetings,
>
> I've created my first launchd script. It's for OpenVPN2. Here are  
> the files I've created so far:
>
> devo:/opt/local/etc/LaunchDaemons root# ls -l org.macports.OpenVPN2/
> total 16
> -rwxr-xr-x   1 root  admin   957 Oct 30 23:06 OpenVPN2.wrapper
> -rw-r--r--   1 root  admin  1026 Oct 30 23:39  
> org.macports.OpenVPN2.plist
>
> The Wrapper
> -----
> #!/bin/sh
>
> . /etc/rc.common
>
> load() {
>               if [ -d /System/Library/Extensions/tun.kext ]; then
>                       kextload -q /System/Library/Extensions/tun.kext;
>               else
>                       echo "tun.kext not found in /System/Library/ 
> Extensions/"
>               fi
>       }
>
> StartService() {
>               load; # first load the module
>               if [[ $( kextstat -l | grep -q 'tun' )$? == 0 ]]; then
>               /opt/local/sbin/openvpn2 --config /opt/local/etc/ovpn/ 
> server.conf --writepid /opt/local/etc/ovpn/ovpn.pid --daemon OpenVPN2
>                               /usr/bin/logger "OpenVPN is loaded"
>       else
>                               /usr/bin/logger "tun extensions is not  
> loaded."
>               fi
> }
>
> StopService() {
>  if [[ $( kextstat -l | grep -q 'tun' )$? == 0 ]]; then
>       kextunload /System/Library/Extensions/tun.kext # first unload  
> the module
>  fi
>
>  pid=`cat /opt/local/etc/ovpn/ovpn.pid` # get the pid number
>  if [ $? -eq 0 ]; then
>   kill $pid
>  fi
> }
>
> RestartService() {
>  StopService "$@"
>  StartService "$@"
> }
>
> RunService "$1"
>
>
> the .plist which is an: ln -sf /opt/local/etc/LaunchDaemons/ 
> org.macports.OpenVPN2/org.macports.OpenVPN2.plist /Library/ 
> LaunchDaemons/....
> ------------------------
> <?xml version='1.0' encoding='UTF-8'?>
> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
> "http://www.apple.com/DTDs/PropertyList-1.0.dtd" >
> <plist version='1.0'>
> <dict>
> <key>Label</key><string>org.macports.OpenVPN2</string>
> <key>ProgramArguments</key>
> <array>
>       <string>/opt/local/bin/daemondo</string>
>       <string>--label=OpenVPN2</string>
>       <string>--start-cmd</string>
>       <string>/opt/local/etc/LaunchDaemons/org.macports.OpenVPN2/ 
> OpenVPN2.wrapper</string>
>       <string>start</string>
>       <string>;</string>
>       <string>--stop-cmd</string>
>       <string>/opt/local/etc/LaunchDaemons/org.macports.OpenVPN2/ 
> OpenVPN2.wrapper</string>
>       <string>stop</string>
>       <string>;</string>
>       <string>--restart-cmd</string>
>       <string>/opt/local/etc/LaunchDaemons/org.macports.OpenVPN2/ 
> OpenVPN2.wrapper</string>
>       <string>restart</string>
>       <string>;</string>
>       <string>--pid=none</string>
> </array>
> <key>Debug</key><false/>
> <key>Disabled</key><false/>
> <key>OnDemand</key><false/>
> <key>RunAtLoad</key><true/>
> <key>NetworkState</key><true/>
> </dict>
> </plist>
>
>
>
>
> However, there are two issues that I can't seem to be able to manage  
> right now.
>
> The first is that OpenVPN does not start at boot while the module is  
> loaded succesfully. When I login to the system and kill daemondo, it  
> relaunches itself and ovpn works fine. I suspect that the problem is  
> en0. Launchd tries to launchd openvpn before en0 comes up. That's  
> why I put the NetworkState keyword, but it does not seem to effect  
> *any* startup script. I had issues with dnsmasq also in the recent  
> past.
>
> The second problem with this script is that when I unload it via  
> launchd it does not kill the process. Launchd unloads the script and  
> (probably) will not be launchd (if -w is added) in the next boot but  
> daemondo keeps running the process nevertheless. Is this a normal  
> behaviour?
>
> I'm not *that* worried about the second. I'd prefer to have a  
> solution about the first one, which is the most important for me.
>
> Best regards & thanks in advance
> Panagiotis (atmosx) Atmatzidis
>
> email:  atma at convalesco.org
> URL:    http://www.convalesco.org
> GnuPG key id: 0xFC4E8BB4
> --
> The wise man said: "Never argue with an idiot. They bring you down  
> to their level and beat you with experience."
>
> _______________________________________________
> launchd-dev mailing list
> launchd-dev at lists.macosforge.org
> http://lists.macosforge.org/mailman/listinfo.cgi/launchd-dev
>
>
>
> -- 
> Brent Gulanowski

Panagiotis (atmosx) Atmatzidis

email:	atma at convalesco.org
URL:	http://www.convalesco.org
GnuPG key id: 0xFC4E8BB4
--
The wise man said: "Never argue with an idiot. They bring you down to  
their level and beat you with experience."

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/launchd-dev/attachments/20091113/8a72a17d/attachment-0001.html>