[26135] trunk/base
source_changes at macosforge.org
source_changes at macosforge.org
Wed Jun 13 16:52:24 PDT 2007
Revision: 26135
http://trac.macosforge.org/projects/macports/changeset/26135
Author: landonf at macports.org
Date: 2007-06-13 16:52:22 -0700 (Wed, 13 Jun 2007)
Log Message:
-----------
Autoconf support for objc, foundation, and optionally-enabled -Werror
Modified Paths:
--------------
trunk/base/Mk/dports.autoconf.mk.in
trunk/base/aclocal.m4
trunk/base/configure
trunk/base/configure.ac
trunk/base/src/config.h.in
Added Paths:
-----------
trunk/base/foundation.m4
trunk/base/objc.m4
Modified: trunk/base/Mk/dports.autoconf.mk.in
===================================================================
--- trunk/base/Mk/dports.autoconf.mk.in 2007-06-13 21:08:52 UTC (rev 26134)
+++ trunk/base/Mk/dports.autoconf.mk.in 2007-06-13 23:52:22 UTC (rev 26135)
@@ -5,15 +5,21 @@
VPATH = @srcdir@
CC = @CC@
-CFLAGS = @CFLAGS@ $(CFLAGS_QUICHEEATERS) $(CFLAGS_DEBUG) $(CFLAGS_OPTIMIZE) $(CPPFLAGS) $(CFLAGS_LIBCURL)
+CFLAGS = @CFLAGS@ $(CFLAGS_QUICHEEATERS) $(CFLAGS_WERROR) $(CFLAGS_DEBUG) $(CFLAGS_OPTIMIZE) $(CPPFLAGS) $(CFLAGS_LIBCURL)
+OBJCFLAGS = @OBJCFLAGS@ $(CFLAGS_QUICHEEATERS) $(CFLAGS_WERROR) ${CFLAGS_DEBUG} $(CFLAGS_OPTIMIZE) $(CPPFLAGS) $(CFLAGS_LIBCURL)
CPPFLAGS = @CPPFLAGS@ @DEFS@ @INCLUDES@ @TCL_INCLUDES@
TCL_DEFS = @TCL_DEFS@
SHLIB_CFLAGS = @SHLIB_CFLAGS@
CFLAGS_DEBUG = @CFLAGS_DEBUG@
CFLAGS_OPTIMIZE = @CFLAGS_OPTIMIZE@
CFLAGS_QUICHEEATERS = @CFLAGS_QUICHEEATERS@
+CFLAGS_WERROR = @CFLAGS_WERROR@
CFLAGS_LIBCURL = @CFLAGS_LIBCURL@
+OBJC_RUNTIME = @OBJC_RUNTIME@
+OBJC_RUNTIME_FLAGS = @OBJC_RUNTIME_FLAGS@
+OBJC_LIBS = @OBJC_LIBS@
+
TCL_CC = @TCL_CC@
SHLIB_LD = @SHLIB_LD@
LDFLAGS_LIBCURL = @LDFLAGS_LIBCURL@
Modified: trunk/base/aclocal.m4
===================================================================
--- trunk/base/aclocal.m4 2007-06-13 21:08:52 UTC (rev 26134)
+++ trunk/base/aclocal.m4 2007-06-13 23:52:22 UTC (rev 26135)
@@ -1,4 +1,6 @@
builtin(include,tcl.m4)
+builtin(include,objc.m4)
+builtin(include,foundation.m4)
#------------------------------------------------------------------------
# OD_CHECK_FRAMEWORK_COREFOUNDATION --
@@ -840,3 +842,31 @@
AC_SUBST(READLINK_IS_NOT_P1003_1A)
])
+
+#------------------------------------------------------------------------
+# MP_WERROR --
+#
+# Enable -Werror
+#
+# Arguments:
+# None.
+#
+# Requires:
+# none
+#
+# Depends:
+# none
+#
+# Results:
+# Substitutes WERROR_CFLAGS variable
+#------------------------------------------------------------------------
+AC_DEFUN([MP_WERROR],[
+ AC_REQUIRE([AC_PROG_CC])
+ AC_ARG_ENABLE(werror, AC_HELP_STRING([--enable-werror], [Add -Werror to CFLAGS. Used for development.]), [enable_werror=${enableval}], [enable_werror=no])
+ if test x"$enable_werror" != "xno"; then
+ CFLAGS_WERROR="-Werror"
+ else
+ CFLAGS_WERROR=""
+ fi
+ AC_SUBST([CFLAGS_WERROR])
+])
Modified: trunk/base/configure
===================================================================
--- trunk/base/configure 2007-06-13 21:08:52 UTC (rev 26134)
+++ trunk/base/configure 2007-06-13 23:52:22 UTC (rev 26135)
@@ -1,57 +1,28 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for MacPorts 1.5.
+# Generated by GNU Autoconf 2.59 for MacPorts 1.5.
#
# Report bugs to <macports-dev at lists.macosforge.org>.
#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 2003 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
+# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
fi
+DUALCASE=1; export DUALCASE # for MKS sh
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
@@ -60,43 +31,8 @@
fi
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
+$as_unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '
@@ -110,19 +46,18 @@
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ $as_unset $as_var
fi
done
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
as_expr=expr
else
as_expr=false
fi
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
@@ -130,388 +65,157 @@
# Name of the executable.
-as_me=`$as_basename -- "$0" ||
+as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
-# CDPATH.
-$as_unset CDPATH
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
-if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
-else
- as_have_required=no
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- case $as_dir in
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
/*)
- for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
- done;;
- esac
-done
-IFS=$as_save_IFS
-
-
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
+ if ("$as_dir/$as_base" -c '
as_lineno_1=$LINENO
as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell autoconf at gnu.org about your system,
- echo including any error possibly output before this
- echo message
-}
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
t loop
- s/-\n.*//
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
+ chmod +x $as_me.lineno ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
# Exit status is that of the last command.
exit
}
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
+rm -f conf$$ conf$$.exe conf$$.file
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
@@ -520,28 +224,7 @@
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -550,27 +233,39 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
-exec 7<&0 </dev/null 6>&1
+# CDPATH.
+$as_unset CDPATH
+
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+exec 6>&1
+
#
# Initializations.
#
ac_default_prefix=/usr/local
-ac_clean_files=
ac_config_libobj_dir=.
-LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
# Identity of this package.
PACKAGE_NAME='MacPorts'
PACKAGE_TARNAME='macports'
@@ -579,195 +274,48 @@
PACKAGE_BUGREPORT='macports-dev at lists.macosforge.org'
ac_unique_file="src/pextlib1.0/Pextlib.c"
-ac_default_prefix=/opt/local
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
+#if HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
-#ifdef HAVE_SYS_STAT_H
+#if HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
-#ifdef STDC_HEADERS
+#if STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
-# ifdef HAVE_STDLIB_H
+# if HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#endif
-#ifdef HAVE_STRINGS_H
+#if HAVE_STRINGS_H
# include <strings.h>
#endif
-#ifdef HAVE_INTTYPES_H
+#if HAVE_INTTYPES_H
# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+# include <stdint.h>
+# endif
#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
+#if HAVE_UNISTD_H
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-target
-target_cpu
-target_vendor
-target_os
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-SET_MAKE
-LN_S
-MTREE
-CVS
-SVN
-RSYNC
-HAVE_LAUNCHD
-LAUNCHCTL
-XCODEBUILD
-BZIP2
-XAR
-OPEN
-TAR
-GNUTAR
-TAR_CMD
-CFLAGS_QUICHEEATERS
-HAVE_FRAMEWORK_COREFOUNDATION
-HAVE_FRAMEWORK_SYSTEMCONFIGURATION
-HAVE_FRAMEWORK_IOKIT
-HAVE_FUNCTION_CFNOTIFICATIONCENTERGETDARWINNOTIFYCENTER
-REPLACEMENT_PROGS
-EXTRA_PROGS
-DPORTSDIR
-PORTCONFIGDIR
-DSTUSR
-DSTGRP
-DSTMODE
-CPP
-GREP
-EGREP
-READLINK_IS_NOT_P1003_1A
-MD5_LIBS
-XMKMF
-X_CFLAGS
-X_PRE_LIBS
-X_LIBS
-X_EXTRA_LIBS
-TCL_VERSION
-TCL_BIN_DIR
-TCL_SRC_DIR
-TCL_LIB_FILE
-TCL_LIB_FLAG
-TCL_LIB_SPEC
-TCL_STUB_LIB_FILE
-TCL_STUB_LIB_FLAG
-TCL_STUB_LIB_SPEC
-TCL_INCLUDES
-TCLSH
-TCL_PACKAGE_DIR
-CURL_CONFIG
-CFLAGS_LIBCURL
-LDFLAGS_LIBCURL
-subdirs
-SQLITE3_LIBS
-SQLITE3_DIR
-OUR_INCLUDED_PACKAGES
-INCLUDES
-CFLAGS_DEBUG
-CFLAGS_OPTIMIZE
-TCL_DEFS
-STLIB_LD
-SHLIB_LD
-SHLIB_CFLAGS
-SHLIB_LDFLAGS
-SHLIB_SUFFIX
-TCL_CC
-prefix_expanded
-PORTCONFIGDIR_EXPANDED
-localstatedir_expanded
-LIBOBJS
-LTLIBOBJS'
+ac_default_prefix=/opt/local
+ac_subdirs_all="$ac_subdirs_all src/thread2.6"
+ac_subdirs_all="$ac_subdirs_all src/sqlite-3.1.3"
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT OBJC OBJCFLAGS ac_ct_OBJC INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA SET_MAKE LN_S MTREE CVS SVN RSYNC HAVE_LAUNCHD LAUNCHCTL XCODEBUILD BZIP2 XAR OPEN TAR GNUTAR TAR_CMD CFLAGS_QUICHEEATERS CFLAGS_WERROR OBJCPP EGREP OBJC_RUNTIME OBJC_RUNTIME_FLAGS OBJC_LIBS OBJC_PTHREAD_LIBS OBJC_PTHREAD_CFLAGS HAVE_FRAMEWORK_COREFOUNDATION HAVE_FRAMEWORK_SYSTEMCONFIGURATION HAVE_FRAMEWORK_IOKIT HAVE_FUNCTION_CFNOTIFICATIONCENTERGETDARWINNOTIFYCENTER REPLACEMENT_PROGS EXTRA_PROGS DPORTSDIR
PORTCONFIGDIR DSTUSR DSTGRP DSTMODE CPP READLINK_IS_NOT_P1003_1A MD5_LIBS X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS TCL_VERSION TCL_BIN_DIR TCL_SRC_DIR TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE TCL_STUB_LIB_FLAG TCL_STUB_LIB_SPEC TCL_INCLUDES TCLSH TCL_PACKAGE_DIR CURL_CONFIG CFLAGS_LIBCURL LDFLAGS_LIBCURL subdirs SQLITE3_LIBS SQLITE3_DIR OUR_INCLUDED_PACKAGES INCLUDES CFLAGS_DEBUG CFLAGS_OPTIMIZE TCL_DEFS STLIB_LD SHLIB_LD SHLIB_CFLAGS SHLIB_LDFLAGS SHLIB_SUFFIX TCL_CC prefix_expanded PORTCONFIGDIR_EXPANDED localstatedir_expanded LIBOBJS LTLIBOBJS'
ac_subst_files=''
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-MTREE
-CVS
-SVN
-RSYNC
-TAR
-GNUTAR
-BZIP2
-XAR
-OPEN
-CPP
-XMKMF'
-ac_subdirs_all='src/thread2.6
-src/sqlite-3.1.3'
# Initialize some variables set by options.
ac_init_help=
@@ -794,48 +342,34 @@
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
+datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
ac_prev=
-ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
+ eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
- case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
- esac
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
# Accept the important Cygnus configure options, so we can diagnose typos.
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
+ case $ac_option in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
@@ -857,45 +391,33 @@
--config-cache | -C)
cache_file=config.cache ;;
- -datadir | --datadir | --datadi | --datad)
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
datadir=$ac_optarg ;;
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
-disable-* | --disable-*)
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
- eval enable_$ac_feature=no ;;
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
- eval enable_$ac_feature=\$ac_optarg ;;
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_$ac_feature='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -922,12 +444,6 @@
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
@@ -952,16 +468,13 @@
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
-localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -1026,16 +539,6 @@
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
@@ -1088,20 +591,24 @@
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
- eval with_$ac_package=\$ac_optarg ;;
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_$ac_package='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
- eval with_$ac_package=no ;;
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
--x)
# Obsolete; use --with-x.
@@ -1132,7 +639,8 @@
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
- eval $ac_envvar=\$ac_optarg
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
export $ac_envvar ;;
*)
@@ -1152,21 +660,29 @@
{ (exit 1); exit 1; }; }
fi
-# Be sure to have absolute directory names.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
do
- eval ac_val=\$$ac_var
+ eval ac_val=$`echo $ac_var`
case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
esac
- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
done
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
@@ -1191,76 +707,122 @@
test "$silent" = yes && exec 6>/dev/null
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { echo "$as_me: error: Working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
-
-
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$0" ||
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$0" : 'X\(//\)[^/]' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
+ if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
{ (exit 1); exit 1; }; }
+ else
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
{ (exit 1); exit 1; }; }
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_OBJC_set=${OBJC+set}
+ac_env_OBJC_value=$OBJC
+ac_cv_env_OBJC_set=${OBJC+set}
+ac_cv_env_OBJC_value=$OBJC
+ac_env_OBJCFLAGS_set=${OBJCFLAGS+set}
+ac_env_OBJCFLAGS_value=$OBJCFLAGS
+ac_cv_env_OBJCFLAGS_set=${OBJCFLAGS+set}
+ac_cv_env_OBJCFLAGS_value=$OBJCFLAGS
+ac_env_MTREE_set=${MTREE+set}
+ac_env_MTREE_value=$MTREE
+ac_cv_env_MTREE_set=${MTREE+set}
+ac_cv_env_MTREE_value=$MTREE
+ac_env_CVS_set=${CVS+set}
+ac_env_CVS_value=$CVS
+ac_cv_env_CVS_set=${CVS+set}
+ac_cv_env_CVS_value=$CVS
+ac_env_SVN_set=${SVN+set}
+ac_env_SVN_value=$SVN
+ac_cv_env_SVN_set=${SVN+set}
+ac_cv_env_SVN_value=$SVN
+ac_env_RSYNC_set=${RSYNC+set}
+ac_env_RSYNC_value=$RSYNC
+ac_cv_env_RSYNC_set=${RSYNC+set}
+ac_cv_env_RSYNC_value=$RSYNC
+ac_env_TAR_set=${TAR+set}
+ac_env_TAR_value=$TAR
+ac_cv_env_TAR_set=${TAR+set}
+ac_cv_env_TAR_value=$TAR
+ac_env_GNUTAR_set=${GNUTAR+set}
+ac_env_GNUTAR_value=$GNUTAR
+ac_cv_env_GNUTAR_set=${GNUTAR+set}
+ac_cv_env_GNUTAR_value=$GNUTAR
+ac_env_BZIP2_set=${BZIP2+set}
+ac_env_BZIP2_value=$BZIP2
+ac_cv_env_BZIP2_set=${BZIP2+set}
+ac_cv_env_BZIP2_value=$BZIP2
+ac_env_XAR_set=${XAR+set}
+ac_env_XAR_value=$XAR
+ac_cv_env_XAR_set=${XAR+set}
+ac_cv_env_XAR_value=$XAR
+ac_env_OPEN_set=${OPEN+set}
+ac_env_OPEN_value=$OPEN
+ac_cv_env_OPEN_set=${OPEN+set}
+ac_cv_env_OPEN_value=$OPEN
+ac_env_OBJCPP_set=${OBJCPP+set}
+ac_env_OBJCPP_value=$OBJCPP
+ac_cv_env_OBJCPP_set=${OBJCPP+set}
+ac_cv_env_OBJCPP_value=$OBJCPP
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
#
# Report the --help message.
@@ -1289,6 +851,9 @@
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
+_ACEOF
+
+ cat <<_ACEOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
@@ -1306,22 +871,15 @@
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/macports]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
_ACEOF
cat <<\_ACEOF
@@ -1346,11 +904,14 @@
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-werror Add -Werror to CFLAGS. Used for development.
--enable-shared build and link with shared libraries --enable-shared
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-objc-runtime Specify either "GNU" or "apple"
+ --with-objc-foundation Specify either "GNUstep" or "apple"
--with-dports-dir=DIR Specify alternate dports directory
--with-install-user=USER
Specify user ownership of installed files
@@ -1373,9 +934,10 @@
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+ OBJC Objective C compiler command
+ OBJCFLAGS Objective C compiler flags
MTREE path to mtree command
CVS path to cvs command
SVN path to svn command
@@ -1385,94 +947,128 @@
BZIP2 path to bzip2 command
XAR path to xar command
OPEN path to open command
+ OBJCPP Objective C preprocessor
CPP C preprocessor
- XMKMF Path to xmkmf, Makefile generator for X Window System
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <macports-dev at lists.macosforge.org>.
_ACEOF
-ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" || continue
+ test -d $ac_dir || continue
ac_builddir=.
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
+if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
case $srcdir in
- .) # We are building in place.
+ .) # No --srcdir option. We are building in place.
ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
+ fi
+ cd $ac_popdir
done
fi
-test -n "$ac_init_help" && exit $ac_status
+test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
MacPorts configure 1.5
-generated by GNU Autoconf 2.61
+generated by GNU Autoconf 2.59
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+Copyright (C) 2003 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
- exit
+ exit 0
fi
-cat >config.log <<_ACEOF
+exec 5>config.log
+cat >&5 <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by MacPorts $as_me 1.5, which was
-generated by GNU Autoconf 2.61. Invocation command line was
+generated by GNU Autoconf 2.59. Invocation command line was
$ $0 $@
_ACEOF
-exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
@@ -1491,7 +1087,7 @@
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
@@ -1505,7 +1101,6 @@
test -z "$as_dir" && as_dir=.
echo "PATH: $as_dir"
done
-IFS=$as_save_IFS
} >&5
@@ -1527,6 +1122,7 @@
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
+ac_sep=
ac_must_keep_next=false
for ac_pass in 1 2
do
@@ -1537,7 +1133,7 @@
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
- *\'*)
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
@@ -1559,7 +1155,9 @@
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
;;
esac
done
@@ -1570,8 +1168,8 @@
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
@@ -1584,34 +1182,20 @@
_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
+{
(set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
*)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
;;
- esac |
- sort
-)
+ esac;
+}
echo
cat <<\_ASBOX
@@ -1622,28 +1206,22 @@
echo
for ac_var in $ac_subst_vars
do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
done | sort
echo
if test -n "$ac_subst_files"; then
cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
+## ------------- ##
+## Output files. ##
+## ------------- ##
_ASBOX
echo
for ac_var in $ac_subst_files
do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
done | sort
echo
fi
@@ -1655,24 +1233,26 @@
## ----------- ##
_ASBOX
echo
- cat confdefs.h
+ sed "/^$/d" confdefs.h | sort
echo
fi
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal"
echo "$as_me: exit $exit_status"
} >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
-' 0
+ ' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
# Predefined preprocessor variables.
@@ -1703,17 +1283,14 @@
# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
- set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
- set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
- set x "$ac_default_prefix/share/config.site" \
- "$ac_default_prefix/etc/config.site"
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
-shift
-for ac_site_file
-do
+for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
{ echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
@@ -1729,8 +1306,8 @@
{ echo "$as_me:$LINENO: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
esac
fi
else
@@ -1742,11 +1319,12 @@
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
case $ac_old_set,$ac_new_set in
set,)
{ echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
@@ -1771,7 +1349,8 @@
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
@@ -1788,6 +1367,11 @@
{ (exit 1); exit 1; }; }
fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
@@ -1812,165 +1396,111 @@
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-ac_config_headers="$ac_config_headers src/config.h"
+ ac_config_headers="$ac_config_headers src/config.h"
+
ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
- elif test -f "$ac_dir/install.sh"; then
+ elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
- elif test -f "$ac_dir/shtool"; then
+ elif test -f $ac_dir/shtool; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
{ (exit 1); exit 1; }; }
fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
{ (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
if test "${ac_cv_build+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
{ { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
{ (exit 1); exit 1; }; }
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
- { (exit 1); exit 1; }; };;
-esac
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
if test "${ac_cv_host+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
{ (exit 1); exit 1; }; }
-fi
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
- { (exit 1); exit 1; }; };;
-esac
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-{ echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test "x$target_alias" = x; then
- ac_cv_target=$ac_cv_host
-else
- ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
+ ac_cv_target_alias=$target_alias
+test "x$ac_cv_target_alias" = "x" &&
+ ac_cv_target_alias=$ac_cv_host_alias
+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
{ (exit 1); exit 1; }; }
-fi
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
-echo "$as_me: error: invalid value of canonical target" >&2;}
- { (exit 1); exit 1; }; };;
-esac
+echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6
target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
# The aliases save the names the user supplied, while $host etc.
@@ -2014,8 +1544,8 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2028,34 +1558,32 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2068,51 +1596,36 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
+ CC=$ac_ct_CC
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2125,34 +1638,74 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
- fi
fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2166,7 +1719,7 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
@@ -2177,7 +1730,6 @@
fi
done
done
-IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
@@ -2195,23 +1747,22 @@
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
+ for ac_prog in cl
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2224,38 +1775,36 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
- for ac_prog in cl.exe
+ for ac_prog in cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2268,45 +1817,29 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
test -n "$ac_ct_CC" && break
done
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
+ CC=$ac_ct_CC
fi
fi
@@ -2319,35 +1852,21 @@
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
@@ -2372,77 +1891,47 @@
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort. b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions. Remove them first so a
-# subsequent execution test works.
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link_default") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
[ab].out )
# We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
break;;
* )
break;;
esac
done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
else
- ac_file=''
-fi
-
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
-if test -z "$ac_file"; then
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
@@ -2454,21 +1943,19 @@
fi
ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
-# Check that the compiler produces executables we can run. If not, either
+# Check the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
if { ac_try='./$ac_file'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
@@ -2487,27 +1974,22 @@
fi
fi
fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
rm -f a.out a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
+# Check the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
@@ -2518,8 +2000,9 @@
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
break;;
* ) break;;
esac
@@ -2533,14 +2016,14 @@
fi
rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
if test "${ac_cv_objext+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2560,20 +2043,14 @@
}
_ACEOF
rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
@@ -2591,12 +2068,12 @@
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
if test "${ac_cv_c_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -2619,49 +2096,50 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_compiler_gnu=no
+ac_compiler_gnu=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
if test "${ac_cv_prog_cc_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -2677,118 +2155,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); }; }; then
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-
+ac_cv_prog_cc_g=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
@@ -2804,12 +2202,12 @@
CFLAGS=
fi
fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_prog_cc_c89=no
+ ac_cv_prog_cc_stdc=no
ac_save_CC=$CC
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -2843,17 +2241,12 @@
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not '\xHH' hex character constants.
These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
+ as 'x'. The following induces an error, until -std1 is added to get
proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
+ that's true only with -std1. */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
@@ -2868,63 +2261,460 @@
return 0;
}
_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_c89=$ac_arg
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-
fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
+rm -f conftest.err conftest.$ac_objext
done
-rm -f conftest.$ac_ext
+rm -f conftest.$ac_ext conftest.$ac_objext
CC=$ac_save_CC
fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
- xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
*)
- CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
esac
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_ext=m
+ac_cpp='$OBJCPP $CPPFLAGS'
+ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_objc_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in $CCC gcc cc objc
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$OBJC"; then
+ ac_cv_prog_OBJC="$OBJC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+OBJC=$ac_cv_prog_OBJC
+if test -n "$OBJC"; then
+ echo "$as_me:$LINENO: result: $OBJC" >&5
+echo "${ECHO_T}$OBJC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$OBJC" && break
+ done
+fi
+if test -z "$OBJC"; then
+ ac_ct_OBJC=$OBJC
+ for ac_prog in $CCC gcc cc objc
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_OBJC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_OBJC"; then
+ ac_cv_prog_ac_ct_OBJC="$ac_ct_OBJC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_OBJC=$ac_cv_prog_ac_ct_OBJC
+if test -n "$ac_ct_OBJC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_OBJC" >&5
+echo "${ECHO_T}$ac_ct_OBJC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_OBJC" && break
+done
+test -n "$ac_ct_OBJC" || ac_ct_OBJC="gcc"
+
+ OBJC=$ac_ct_OBJC
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for Objective C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+echo "$as_me:$LINENO: checking whether we are using the GNU Objective C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU Objective C compiler... $ECHO_C" >&6
+if test "${ac_cv_objc_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_objc_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objc_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_objc_compiler_gnu" >&6
+GOBJC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_OBJCFLAGS=${OBJCFLAGS+set}
+ac_save_OBJCFLAGS=$OBJCFLAGS
+OBJCFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $OBJC accepts -g" >&5
+echo $ECHO_N "checking whether $OBJC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_objc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_objc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_objc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_objc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_objc_g" >&6
+if test "$ac_test_OBJCFLAGS" = set; then
+ OBJCFLAGS=$ac_save_OBJCFLAGS
+elif test $ac_cv_prog_objc_g = yes; then
+ if test "$GOBJC" = yes; then
+ OBJCFLAGS="-g -O2"
+ else
+ OBJCFLAGS="-g"
+ fi
+else
+ if test "$GOBJC" = yes; then
+ OBJCFLAGS="-O2"
+ else
+ OBJCFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
@@ -2938,8 +2728,8 @@
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -2961,7 +2751,7 @@
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
@@ -2980,22 +2770,21 @@
;;
esac
done
-IFS=$as_save_IFS
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
+ # removed, or if the path is relative.
INSTALL=$ac_install_sh
fi
fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
@@ -3005,51 +2794,50 @@
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
+ @echo 'ac_maketemp="$(MAKE)"'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
rm -f conftest.make
fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
SET_MAKE=
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
SET_MAKE="MAKE=${MAKE-make}"
fi
-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
else
- { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6; }
+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
fi
# Extract the first word of "mtree", so it can be a program name with args.
set dummy mtree; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_MTREE+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3064,32 +2852,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_MTREE="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
MTREE=$ac_cv_path_MTREE
+
if test -n "$MTREE"; then
- { echo "$as_me:$LINENO: result: $MTREE" >&5
-echo "${ECHO_T}$MTREE" >&6; }
+ echo "$as_me:$LINENO: result: $MTREE" >&5
+echo "${ECHO_T}$MTREE" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "cvs", so it can be a program name with args.
set dummy cvs; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_CVS+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3104,32 +2891,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_CVS="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
CVS=$ac_cv_path_CVS
+
if test -n "$CVS"; then
- { echo "$as_me:$LINENO: result: $CVS" >&5
-echo "${ECHO_T}$CVS" >&6; }
+ echo "$as_me:$LINENO: result: $CVS" >&5
+echo "${ECHO_T}$CVS" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "svn", so it can be a program name with args.
set dummy svn; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_SVN+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3144,32 +2930,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_SVN="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
SVN=$ac_cv_path_SVN
+
if test -n "$SVN"; then
- { echo "$as_me:$LINENO: result: $SVN" >&5
-echo "${ECHO_T}$SVN" >&6; }
+ echo "$as_me:$LINENO: result: $SVN" >&5
+echo "${ECHO_T}$SVN" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "rsync", so it can be a program name with args.
set dummy rsync; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_RSYNC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3184,32 +2969,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_RSYNC="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
RSYNC=$ac_cv_path_RSYNC
+
if test -n "$RSYNC"; then
- { echo "$as_me:$LINENO: result: $RSYNC" >&5
-echo "${ECHO_T}$RSYNC" >&6; }
+ echo "$as_me:$LINENO: result: $RSYNC" >&5
+echo "${ECHO_T}$RSYNC" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "launchd", so it can be a program name with args.
set dummy launchd; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_HAVE_LAUNCHD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3222,31 +3006,29 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_HAVE_LAUNCHD="yes"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
fi
fi
HAVE_LAUNCHD=$ac_cv_prog_HAVE_LAUNCHD
if test -n "$HAVE_LAUNCHD"; then
- { echo "$as_me:$LINENO: result: $HAVE_LAUNCHD" >&5
-echo "${ECHO_T}$HAVE_LAUNCHD" >&6; }
+ echo "$as_me:$LINENO: result: $HAVE_LAUNCHD" >&5
+echo "${ECHO_T}$HAVE_LAUNCHD" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "launchctl", so it can be a program name with args.
set dummy launchctl; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_LAUNCHCTL+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3261,32 +3043,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_LAUNCHCTL="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
LAUNCHCTL=$ac_cv_path_LAUNCHCTL
+
if test -n "$LAUNCHCTL"; then
- { echo "$as_me:$LINENO: result: $LAUNCHCTL" >&5
-echo "${ECHO_T}$LAUNCHCTL" >&6; }
+ echo "$as_me:$LINENO: result: $LAUNCHCTL" >&5
+echo "${ECHO_T}$LAUNCHCTL" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "xcodebuild", so it can be a program name with args.
set dummy xcodebuild; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_XCODEBUILD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3301,32 +3082,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_XCODEBUILD="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
XCODEBUILD=$ac_cv_path_XCODEBUILD
+
if test -n "$XCODEBUILD"; then
- { echo "$as_me:$LINENO: result: $XCODEBUILD" >&5
-echo "${ECHO_T}$XCODEBUILD" >&6; }
+ echo "$as_me:$LINENO: result: $XCODEBUILD" >&5
+echo "${ECHO_T}$XCODEBUILD" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "bzip2", so it can be a program name with args.
set dummy bzip2; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_BZIP2+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3341,32 +3121,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_BZIP2="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
BZIP2=$ac_cv_path_BZIP2
+
if test -n "$BZIP2"; then
- { echo "$as_me:$LINENO: result: $BZIP2" >&5
-echo "${ECHO_T}$BZIP2" >&6; }
+ echo "$as_me:$LINENO: result: $BZIP2" >&5
+echo "${ECHO_T}$BZIP2" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "xar", so it can be a program name with args.
set dummy xar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_XAR+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3381,32 +3160,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_XAR="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
XAR=$ac_cv_path_XAR
+
if test -n "$XAR"; then
- { echo "$as_me:$LINENO: result: $XAR" >&5
-echo "${ECHO_T}$XAR" >&6; }
+ echo "$as_me:$LINENO: result: $XAR" >&5
+echo "${ECHO_T}$XAR" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "open", so it can be a program name with args.
set dummy open; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_OPEN+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3421,29 +3199,28 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_OPEN="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
OPEN=$ac_cv_path_OPEN
+
if test -n "$OPEN"; then
- { echo "$as_me:$LINENO: result: $OPEN" >&5
-echo "${ECHO_T}$OPEN" >&6; }
+ echo "$as_me:$LINENO: result: $OPEN" >&5
+echo "${ECHO_T}$OPEN" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Define some precious variables allowing user to override PATH for some programs
@@ -3458,8 +3235,8 @@
# Extract the first word of "tar", so it can be a program name with args.
set dummy tar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_TAR+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3474,32 +3251,31 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
TAR=$ac_cv_path_TAR
+
if test -n "$TAR"; then
- { echo "$as_me:$LINENO: result: $TAR" >&5
-echo "${ECHO_T}$TAR" >&6; }
+ echo "$as_me:$LINENO: result: $TAR" >&5
+echo "${ECHO_T}$TAR" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
# Extract the first word of "gnutar", so it can be a program name with args.
set dummy gnutar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_GNUTAR+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -3514,50 +3290,49 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_GNUTAR="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
GNUTAR=$ac_cv_path_GNUTAR
+
if test -n "$GNUTAR"; then
- { echo "$as_me:$LINENO: result: $GNUTAR" >&5
-echo "${ECHO_T}$GNUTAR" >&6; }
+ echo "$as_me:$LINENO: result: $GNUTAR" >&5
+echo "${ECHO_T}$GNUTAR" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
- { echo "$as_me:$LINENO: checking for which tar variant to use" >&5
-echo $ECHO_N "checking for which tar variant to use... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for which tar variant to use" >&5
+echo $ECHO_N "checking for which tar variant to use... $ECHO_C" >&6
if test -n "$GNUTAR"; then
TAR_CMD=$GNUTAR
else
TAR_CMD=$TAR
fi
- { echo "$as_me:$LINENO: result: $TAR_CMD" >&5
-echo "${ECHO_T}$TAR_CMD" >&6; }
+ echo "$as_me:$LINENO: result: $TAR_CMD" >&5
+echo "${ECHO_T}$TAR_CMD" >&6
- { echo "$as_me:$LINENO: checking for $TAR_CMD --no-same-owner support" >&5
-echo $ECHO_N "checking for $TAR_CMD --no-same-owner support... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for $TAR_CMD --no-same-owner support" >&5
+echo $ECHO_N "checking for $TAR_CMD --no-same-owner support... $ECHO_C" >&6
no_same_owner_support=`$TAR_CMD --help 2>&1 | grep no-same-owner`
if test -z "$no_same_owner_support" ; then
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
else
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
TAR_CMD="$TAR_CMD --no-same-owner"
fi
@@ -3569,9 +3344,25 @@
+ # Check whether --enable-werror or --disable-werror was given.
+if test "${enable_werror+set}" = set; then
+ enableval="$enable_werror"
+ enable_werror=${enableval}
+else
+ enable_werror=no
+fi;
+ if test x"$enable_werror" != "xno"; then
+ CFLAGS_WERROR="-Werror"
+ else
+ CFLAGS_WERROR=""
+ fi
- { echo "$as_me:$LINENO: checking how to mark unused variables" >&5
-echo $ECHO_N "checking how to mark unused variables... $ECHO_C" >&6; }
+
+
+
+
+ echo "$as_me:$LINENO: checking how to mark unused variables" >&5
+echo $ECHO_N "checking how to mark unused variables... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -3581,22 +3372,27 @@
int a __attribute__ ((unused));
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
cat >>confdefs.h <<\_ACEOF
#define UNUSED __attribute__((unused))
@@ -3606,24 +3402,1411 @@
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- cat >>confdefs.h <<\_ACEOF
+cat >>confdefs.h <<\_ACEOF
#define UNUSED
_ACEOF
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ echo "$as_me:$LINENO: result: " >&5
+echo "${ECHO_T}" >&6
- { echo "$as_me:$LINENO: result: " >&5
-echo "${ECHO_T}" >&6; }
+ echo "$as_me:$LINENO: checking for gcc symbol visibility attribute" >&5
+echo $ECHO_N "checking for gcc symbol visibility attribute... $ECHO_C" >&6
+ if test "${mp_cv_attribute_mp_private+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #if defined(__GNUC__) && defined(__APPLE__) && __GNUC__ < 4
+ # error Darwin does not support the visibility attribute with gcc releases prior to 4
+ #elif defined(WIN32) && __GNUC__ < 4
+ # error MinGW/Cygwin do not support the visibility attribute with gcc releases prior to 4.
+ #endif
+ int a __attribute__ ((visibility("hidden")));
+
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+ mp_cv_attribute_mp_private="__attribute__((visibility(\"hidden\")))"
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ mp_cv_attribute_mp_private="no"
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+
+
+ echo "$as_me:$LINENO: result: $mp_cv_attribute_mp_private" >&5
+echo "${ECHO_T}$mp_cv_attribute_mp_private" >&6
+
+ if test x"$mp_cv_attribute_mp_private" = "xno"; then
+ MP_PRIVATE=""
+ else
+ MP_PRIVATE="$mp_cv_attribute_mp_private"
+ fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define MP_PRIVATE $MP_PRIVATE
+_ACEOF
+
+
+
+# Foundation checks
+
+ac_ext=m
+ac_cpp='$OBJCPP $CPPFLAGS'
+ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_objc_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the Objective C preprocessor" >&5
+echo $ECHO_N "checking how to run the Objective C preprocessor... $ECHO_C" >&6
+if test -z "$OBJCPP"; then
+ if test "${ac_cv_prog_OBJCPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because OBJCPP needs to be expanded
+ for OBJCPP in "$OBJC -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_objc_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_objc_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_objc_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_objc_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_objc_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_OBJCPP=$OBJCPP
+
+fi
+ OBJCPP=$ac_cv_prog_OBJCPP
+else
+ ac_cv_prog_OBJCPP=$OBJCPP
+fi
+echo "$as_me:$LINENO: result: $OBJCPP" >&5
+echo "${ECHO_T}$OBJCPP" >&6
+ac_preproc_ok=false
+for ac_objc_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_objc_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_objc_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_objc_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_objc_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: Objective C preprocessor \"$OBJCPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: Objective C preprocessor \"$OBJCPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=m
+ac_cpp='$OBJCPP $CPPFLAGS'
+ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_objc_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Check whether --with-objc-runtime or --without-objc-runtime was given.
+if test "${with_objc_runtime+set}" = set; then
+ withval="$with_objc_runtime"
+ with_objc_runtime=${withval}
+fi;
+
+ if test x"${with_objc_runtime}" != x; then
+ case "${with_objc_runtime}" in
+ GNU)
+ ;;
+ apple)
+ ;;
+ *)
+ { { echo "$as_me:$LINENO: error: ${with_objc_runtime} is not a valid argument to --with-objc-runtime. Please specify either \"GNU\" or \"apple\"" >&5
+echo "$as_me: error: ${with_objc_runtime} is not a valid argument to --with-objc-runtime. Please specify either \"GNU\" or \"apple\"" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ esac
+ fi
+
+ ac_ext=m
+ac_cpp='$OBJCPP $CPPFLAGS'
+ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_objc_compiler_gnu
+
+
+ # Check for common header, objc/objc.h
+
+for ac_header in objc/objc.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_objc_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_objc_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_objc_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------------------ ##
+## Report this to macports-dev at lists.macosforge.org ##
+## ------------------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+else
+ { { echo "$as_me:$LINENO: error: Can't locate Objective C runtime headers" >&5
+echo "$as_me: error: Can't locate Objective C runtime headers" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+done
+
+
+ # Save LIBS & OBJCFLAGS
+ # depending on whether the cache is used,
+ # the variables may or may not be modified.
+ OLD_LIBS="${LIBS}"
+ OLD_OBJCFLAGS="${OBJCFLAGS}"
+
+ # Add -lobjc. The following tests will ensure that the library exists and functions with the detected Objective C compiler
+ LIBS="${LIBS} -lobjc"
+
+ # Test if pthreads are required to link against
+ # libobjc - this is the case on FreeBSD.
+
+ echo "$as_me:$LINENO: checking if linking libobjc requires pthreads" >&5
+echo $ECHO_N "checking if linking libobjc requires pthreads... $ECHO_C" >&6
+ if test "${od_cv_objc_req_pthread+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ # First, test if objc links without pthreads
+ # The following uses quadrigraphs
+ # '[' = '['
+ # ']' = ']'
+ cat >conftest.$ac_ext <<_ACEOF
+
+ /* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <objc/objc.h>
+ #include <objc/Object.h>
+
+int
+main ()
+{
+
+ Object *obj = [Object alloc];
+ puts([obj name]);
+
+ ;
+ return 0;
+}
+
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+ # Linked without -pthread
+ od_cv_objc_req_pthread="no"
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ # Failed to link without -pthread
+ od_cv_objc_req_pthread="yes"
+
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+ # If the above failed, try with pthreads
+ if test x"${od_cv_objc_req_pthread}" = x"yes"; then
+ LIBS="${LIBS} ${PTHREAD_LIBS}"
+ OBJCFLAGS="${OBJCFLAGS} ${PTHREAD_CFLAGS}"
+ cat >conftest.$ac_ext <<_ACEOF
+
+ /* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <objc/objc.h>
+ #include <objc/Object.h>
+
+int
+main ()
+{
+
+ Object *obj = [Object alloc];
+ puts([obj name]);
+
+ ;
+ return 0;
+}
+
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+ # Linked with -lpthread
+ od_cv_objc_req_pthread="yes"
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ # Failed to link against objc at all
+ # This will be caught in the runtime
+ # checks below
+ od_cv_objc_req_pthread="no"
+
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+
+fi
+
+ echo "$as_me:$LINENO: result: ${od_cv_objc_req_pthread}" >&5
+echo "${ECHO_T}${od_cv_objc_req_pthread}" >&6
+
+ if test x"${od_cv_objc_req_pthread}" = x"no"; then
+ OBJC_LIBS="-lobjc"
+ OBJC_PTHREAD_LIBS="${PTHREAD_LIBS}"
+ OBJC_PTHREAD_CFLAGS="${PTHREAD_CFLAGS}"
+ elif test x"${od_cv_objc_req_pthread}" = x"yes"; then
+ OBJC_LIBS="-lobjc ${PTHREAD_LIBS}"
+ OBJCFLAGS="${OBJCFLAGS} ${PTHREAD_CFLAGS}"
+ fi
+
+ if test x"${with_objc_runtime}" = x || test x"${with_objc_runtime}" = x"apple"; then
+ echo "$as_me:$LINENO: checking for Apple Objective-C runtime" >&5
+echo $ECHO_N "checking for Apple Objective-C runtime... $ECHO_C" >&6
+ if test "${od_cv_objc_runtime_apple+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ # The following uses quadrigraphs
+ # '[' = '['
+ # ']' = ']'
+ cat >conftest.$ac_ext <<_ACEOF
+
+ /* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <objc/objc.h>
+ #include <objc/objc-api.h>
+
+int
+main ()
+{
+
+ id class = objc_lookUpClass("Object");
+ id obj = [class alloc];
+ puts([obj name]);
+
+ ;
+ return 0;
+}
+
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+ od_cv_objc_runtime_apple="yes"
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ od_cv_objc_runtime_apple="no"
+
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+
+ echo "$as_me:$LINENO: result: ${od_cv_objc_runtime_apple}" >&5
+echo "${ECHO_T}${od_cv_objc_runtime_apple}" >&6
+ else
+ od_cv_objc_runtime_apple="no"
+ fi
+
+ if test x"${with_objc_runtime}" = x || test x"${with_objc_runtime}" = x"GNU"; then
+ echo "$as_me:$LINENO: checking for GNU Objective C runtime" >&5
+echo $ECHO_N "checking for GNU Objective C runtime... $ECHO_C" >&6
+ if test "${od_cv_objc_runtime_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ # The following uses quadrigraphs
+ # '[' = '['
+ # ']' = ']'
+ cat >conftest.$ac_ext <<_ACEOF
+
+ /* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <objc/objc.h>
+ #include <objc/objc-api.h>
+
+int
+main ()
+{
+
+ id class = objc_lookup_class("Object");
+ id obj = [class alloc];
+ puts([obj name]);
+
+ ;
+ return 0;
+}
+
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+ od_cv_objc_runtime_gnu="yes"
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ od_cv_objc_runtime_gnu="no"
+
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+
+ echo "$as_me:$LINENO: result: ${od_cv_objc_runtime_gnu}" >&5
+echo "${ECHO_T}${od_cv_objc_runtime_gnu}" >&6
+ else
+ od_cv_objc_runtime_gnu="no"
+ fi
+
+ # Apple runtime is prefered
+ if test x"${od_cv_objc_runtime_apple}" = x"yes"; then
+ OBJC_RUNTIME="APPLE_RUNTIME"
+ OBJC_RUNTIME_FLAGS="-fnext-runtime"
+ { echo "$as_me:$LINENO: Using Apple Objective-C runtime" >&5
+echo "$as_me: Using Apple Objective-C runtime" >&6;}
+
+cat >>confdefs.h <<\_ACEOF
+#define APPLE_RUNTIME 1
+_ACEOF
+
+ elif test x"${od_cv_objc_runtime_gnu}" = x"yes"; then
+ OBJC_RUNTIME="GNU_RUNTIME"
+ OBJC_RUNTIME_FLAGS="-fgnu-runtime"
+ { echo "$as_me:$LINENO: Using GNU Objective-C runtime" >&5
+echo "$as_me: Using GNU Objective-C runtime" >&6;}
+
+cat >>confdefs.h <<\_ACEOF
+#define GNU_RUNTIME 1
+_ACEOF
+
+ else
+ { { echo "$as_me:$LINENO: error: Could not locate a working Objective-C runtime.
+See \`config.log' for more details." >&5
+echo "$as_me: error: Could not locate a working Objective-C runtime.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ # Restore LIBS & OBJCFLAGS
+ LIBS="${OLD_LIBS}"
+ OBJCFLAGS="${OLD_OBJCFLAGS}"
+
+
+
+
+
+
+
+
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+# Check whether --with-objc-foundation or --without-objc-foundation was given.
+if test "${with_objc_foundation+set}" = set; then
+ withval="$with_objc_foundation"
+ with_objc_foundation=${withval}
+fi;
+
+ if test x"${with_objc_foundation}" != x; then
+ case "${with_objc_foundation}" in
+ GNUstep)
+ ;;
+ GNU)
+ with_objc_foundation="GNUstep"
+ ;;
+ apple)
+ ;;
+ *)
+ { { echo "$as_me:$LINENO: error: ${with_objc_foundation} is not a valid argument to --with-objc-foundation. Please specify either \"GNU\" or \"apple\"" >&5
+echo "$as_me: error: ${with_objc_foundation} is not a valid argument to --with-objc-foundation. Please specify either \"GNU\" or \"apple\"" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+ esac
+ fi
+
+ ac_ext=m
+ac_cpp='$OBJCPP $CPPFLAGS'
+ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_objc_compiler_gnu
+
+
+ if test x"${with_objc_foundation}" == x || test x"${with_objc_foundation}" == x"apple"; then
+ # '[' = '['
+ # ']' = ']'
+ echo "$as_me:$LINENO: checking for Apple Foundation library" >&5
+echo $ECHO_N "checking for Apple Foundation library... $ECHO_C" >&6
+
+ # Set NeXT LIBS and CFLAGS
+ APPLE_FOUNDATION_CFLAGS="-framework Foundation"
+ APPLE_FOUNDATION_LIBS="-framework Foundation"
+
+ if test "${ac_cv_objc_foundation_apple+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ # Save old LIBS and CFLAGS
+ LIBS_OLD="${LIBS}"
+ CFLAGS_OLD="${CFLAGS}"
+
+ CFLAGS="${APPLE_FOUNDATION_CFLAGS} ${CFLAGS}"
+ LIBS="${APPLE_FOUNDATION_LIBS} ${LIBS}"
+
+ cat >conftest.$ac_ext <<_ACEOF
+
+ /* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <Foundation/Foundation.h>
+
+int
+main ()
+{
+
+ NSString *string = [[NSString alloc] initWithCString: "Hello World"];
+ [NSString length];
+
+ ;
+ return 0;
+}
+
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+ ac_cv_objc_foundation_apple="yes"
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ ac_cv_objc_foundation_apple="no"
+
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ # Restore LIBS and CFLAGS
+ LIBS="${LIBS_OLD}"
+ CFLAGS="${CFLAGS_OLD}"
+
+fi
+
+ echo "$as_me:$LINENO: result: ${ac_cv_objc_foundation_apple}" >&5
+echo "${ECHO_T}${ac_cv_objc_foundation_apple}" >&6
+ else
+ ac_cv_objc_foundation_apple="no"
+ fi
+
+ if test x"${with_objc_foundation}" == x || test x${with_objc_foundation} == x"GNUstep"; then
+ if test x"${GNUSTEP_SYSTEM_ROOT}" == x; then
+ if test x"${with_objc_foundation}" == x"GNUstep"; then
+ { { echo "$as_me:$LINENO: error: GNUSTEP_SYSTEM_ROOT is not defined in your environment, preventing the use of GNUstep's Foundation library" >&5
+echo "$as_me: error: GNUSTEP_SYSTEM_ROOT is not defined in your environment, preventing the use of GNUstep's Foundation library" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ { echo "$as_me:$LINENO: WARNING: GNUSTEP_SYSTEM_ROOT is not defined in your environment, preventing the use of GNUstep's Foundation library" >&5
+echo "$as_me: WARNING: GNUSTEP_SYSTEM_ROOT is not defined in your environment, preventing the use of GNUstep's Foundation library" >&2;}
+ fi
+ else
+
+ echo "$as_me:$LINENO: checking for GNUstep Foundation library" >&5
+echo $ECHO_N "checking for GNUstep Foundation library... $ECHO_C" >&6
+
+ # Set GNUstep LDFLAGS, CPPFLAGS, and LIBS
+ GNUSTEP_LDFLAGS="-L${GNUSTEP_SYSTEM_ROOT}/Library/Libraries/"
+ GNUSTEP_CPPFLAGS="-I${GNUSTEP_SYSTEM_ROOT}/Library/Headers/"
+ GNUSTEP_LIBS="-lgnustep-base"
+
+ if test "${ac_cv_objc_foundation_gnustep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ # Save old LDFLAGS, CPPFLAGS, and LIBS
+ LDFLAGS_OLD="${LDFLAGS}"
+ CPPFLAGS_OLD="${CPPFLAGS}"
+ LIBS_OLD="${LIBS}"
+
+ LDFLAGS="${GNUSTEP_LDFLAGS} ${LDFLAGS}"
+ CPPFLAGS="${GNUSTEP_CPPFLAGS} ${CPPFLAGS}"
+ LIBS="${GNUSTEP_LIBS} ${LIBS}"
+
+ cat >conftest.$ac_ext <<_ACEOF
+
+ /* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <Foundation/Foundation.h>
+
+int
+main ()
+{
+
+ NSString *string = [[NSString alloc] initWithCString: "Hello World"];
+ [NSString length];
+
+ ;
+ return 0;
+}
+
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_objc_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+ ac_cv_objc_foundation_gnustep="yes"
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+ ac_cv_objc_foundation_gnustep="no"
+
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ # Restore LDFLAGS, CPPFLAGS, and LIBS
+ LDFLAGS="${LDFLAGS_OLD}"
+ CPPFLAGS="${CPPFLAGS_OLD}"
+ LIBS="${LIBS_OLD}"
+
+fi
+
+ echo "$as_me:$LINENO: result: ${ac_cv_objc_foundation_gnustep}" >&5
+echo "${ECHO_T}${ac_cv_objc_foundation_gnustep}" >&6
+ fi
+ else
+ ac_cv_objc_foundation_gnustep="no"
+ fi
+
+ # NeXT Foundation is prefered
+ if test x"${ac_cv_objc_foundation_apple}" == x"yes"; then
+ OBJC_FOUNDATION="Apple"
+ CPPFLAGS="${APPLE_FOUNDATION_CPPFLAGS} ${CPPFLAGS}"
+ LIBS="${APPLE_FOUNDATION_LIBS} ${LIBS}"
+
+cat >>confdefs.h <<\_ACEOF
+#define APPLE_FOUNDATION 1
+_ACEOF
+
+ { echo "$as_me:$LINENO: Using Apple Foundation library" >&5
+echo "$as_me: Using Apple Foundation library" >&6;}
+ elif test x"${ac_cv_objc_foundation_gnustep}" == x"yes"; then
+ OBJC_FOUNDATION="GNUstep"
+ CPPFLAGS="${GNUSTEP_CPPFLAGS} ${CPPFLAGS}"
+ LIBS="${GNUSTEP_LIBS} ${LIBS}"
+ LDFLAGS="${GNUSTEP_LDFLAGS} ${LDFLAGS}"
+
+cat >>confdefs.h <<\_ACEOF
+#define GNUSTEP_FOUNDATION 1
+_ACEOF
+
+ { echo "$as_me:$LINENO: Using GNUstep Foundation library" >&5
+echo "$as_me: Using GNUstep Foundation library" >&6;}
+ else
+ { { echo "$as_me:$LINENO: error: Could not find a working Foundation implementation" >&5
+echo "$as_me: error: Could not find a working Foundation implementation" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
FRAMEWORK_LIBS="-framework CoreFoundation"
- { echo "$as_me:$LINENO: checking for CoreFoundation framework" >&5
-echo $ECHO_N "checking for CoreFoundation framework... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for CoreFoundation framework" >&5
+echo $ECHO_N "checking for CoreFoundation framework... $ECHO_C" >&6
if test "${od_cv_have_framework_corefoundation+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -3655,23 +4838,27 @@
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
od_cv_have_framework_corefoundation="yes"
@@ -3684,8 +4871,7 @@
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_save_LIBS"
@@ -3693,8 +4879,8 @@
fi
- { echo "$as_me:$LINENO: result: ${od_cv_have_framework_corefoundation}" >&5
-echo "${ECHO_T}${od_cv_have_framework_corefoundation}" >&6; }
+ echo "$as_me:$LINENO: result: ${od_cv_have_framework_corefoundation}" >&5
+echo "${ECHO_T}${od_cv_have_framework_corefoundation}" >&6
if test x"${od_cv_have_framework_corefoundation}" = "xyes"; then
@@ -3709,8 +4895,8 @@
FRAMEWORK_LIBS="-framework SystemConfiguration"
- { echo "$as_me:$LINENO: checking for SystemConfiguration framework" >&5
-echo $ECHO_N "checking for SystemConfiguration framework... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for SystemConfiguration framework" >&5
+echo $ECHO_N "checking for SystemConfiguration framework... $ECHO_C" >&6
if test "${od_cv_have_framework_systemconfiguration+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -3742,23 +4928,27 @@
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
od_cv_have_framework_systemconfiguration="yes"
@@ -3771,8 +4961,7 @@
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_save_LIBS"
@@ -3780,8 +4969,8 @@
fi
- { echo "$as_me:$LINENO: result: ${od_cv_have_framework_systemconfiguration}" >&5
-echo "${ECHO_T}${od_cv_have_framework_systemconfiguration}" >&6; }
+ echo "$as_me:$LINENO: result: ${od_cv_have_framework_systemconfiguration}" >&5
+echo "${ECHO_T}${od_cv_have_framework_systemconfiguration}" >&6
if test x"${od_cv_have_framework_systemconfiguration}" = "xyes"; then
@@ -3796,8 +4985,8 @@
FRAMEWORK_LIBS="-framework IOKit"
- { echo "$as_me:$LINENO: checking for IOKit framework" >&5
-echo $ECHO_N "checking for IOKit framework... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for IOKit framework" >&5
+echo $ECHO_N "checking for IOKit framework... $ECHO_C" >&6
if test "${od_cv_have_framework_iokit+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -3829,23 +5018,27 @@
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
od_cv_have_framework_iokit="yes"
@@ -3858,8 +5051,7 @@
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_save_LIBS"
@@ -3867,8 +5059,8 @@
fi
- { echo "$as_me:$LINENO: result: ${od_cv_have_framework_iokit}" >&5
-echo "${ECHO_T}${od_cv_have_framework_iokit}" >&6; }
+ echo "$as_me:$LINENO: result: ${od_cv_have_framework_iokit}" >&5
+echo "${ECHO_T}${od_cv_have_framework_iokit}" >&6
if test x"${od_cv_have_framework_iokit}" = "xyes"; then
@@ -3883,8 +5075,8 @@
FRAMEWORK_LIBS="-framework CoreFoundation"
- { echo "$as_me:$LINENO: checking for CFNotificationCenterGetDarwinNotifyCenter" >&5
-echo $ECHO_N "checking for CFNotificationCenterGetDarwinNotifyCenter... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for CFNotificationCenterGetDarwinNotifyCenter" >&5
+echo $ECHO_N "checking for CFNotificationCenterGetDarwinNotifyCenter... $ECHO_C" >&6
if test "${od_cv_have_function_cfnotificationcentergetdarwinnotifycenter+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -3915,23 +5107,27 @@
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
od_cv_have_function_cfnotificationcentergetdarwinnotifycenter="yes"
@@ -3944,8 +5140,7 @@
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_save_LIBS"
@@ -3953,8 +5148,8 @@
fi
- { echo "$as_me:$LINENO: result: ${od_cv_have_function_cfnotificationcentergetdarwinnotifycenter}" >&5
-echo "${ECHO_T}${od_cv_have_function_cfnotificationcentergetdarwinnotifycenter}" >&6; }
+ echo "$as_me:$LINENO: result: ${od_cv_have_function_cfnotificationcentergetdarwinnotifycenter}" >&5
+echo "${ECHO_T}${od_cv_have_function_cfnotificationcentergetdarwinnotifycenter}" >&6
if test x"${od_cv_have_function_cfnotificationcentergetdarwinnotifycenter}" = "xyes"; then
@@ -3972,8 +5167,8 @@
- { echo "$as_me:$LINENO: checking for whether we will build daemondo" >&5
-echo $ECHO_N "checking for whether we will build daemondo... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for whether we will build daemondo" >&5
+echo $ECHO_N "checking for whether we will build daemondo... $ECHO_C" >&6
result=no
case $host_os in
darwin*)
@@ -3983,14 +5178,14 @@
test "x$od_cv_have_function_cfnotificationcentergetdarwinnotifycenter" == "xyes"; then
result=yes
EXTRA_PROGS="$EXTRA_PROGS daemondo"
- ac_config_files="$ac_config_files src/programs/daemondo/Makefile"
+ ac_config_files="$ac_config_files src/programs/daemondo/Makefile"
fi
;;
*)
esac
- { echo "$as_me:$LINENO: result: ${result}" >&5
-echo "${ECHO_T}${result}" >&6; }
+ echo "$as_me:$LINENO: result: ${result}" >&5
+echo "${ECHO_T}${result}" >&6
#OD_PROG_XAR
@@ -4006,15 +5201,15 @@
-# Check whether --with-dports-dir was given.
+# Check whether --with-dports-dir or --without-dports-dir was given.
if test "${with_dports_dir+set}" = set; then
- withval=$with_dports_dir; dportsdir="$withval"
-fi
+ withval="$with_dports_dir"
+ dportsdir="$withval"
+fi;
-
- { echo "$as_me:$LINENO: checking for dports tree" >&5
-echo $ECHO_N "checking for dports tree... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for dports tree" >&5
+echo $ECHO_N "checking for dports tree... $ECHO_C" >&6
if test "x$dportsdir" != "x" ; then
if test -d "$dportsdir" -a -e "$dportsdir/PortIndex" ; then
:
@@ -4032,8 +5227,8 @@
fi
if test "x$dportsdir" != "x" ; then
- { echo "$as_me:$LINENO: result: $dportsdir" >&5
-echo "${ECHO_T}$dportsdir" >&6; }
+ echo "$as_me:$LINENO: result: $dportsdir" >&5
+echo "${ECHO_T}$dportsdir" >&6
DPORTSDIR="$dportsdir"
else
@@ -4044,13 +5239,13 @@
- { echo "$as_me:$LINENO: checking for ports config directory" >&5
-echo $ECHO_N "checking for ports config directory... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for ports config directory" >&5
+echo $ECHO_N "checking for ports config directory... $ECHO_C" >&6
portconfigdir='${sysconfdir}/ports'
- { echo "$as_me:$LINENO: result: $portconfigdir" >&5
-echo "${ECHO_T}$portconfigdir" >&6; }
+ echo "$as_me:$LINENO: result: $portconfigdir" >&5
+echo "${ECHO_T}$portconfigdir" >&6
PORTCONFIGDIR="$portconfigdir"
@@ -4061,34 +5256,34 @@
-# Check whether --with-install-user was given.
+# Check whether --with-install-user or --without-install-user was given.
if test "${with_install_user+set}" = set; then
- withval=$with_install_user; DSTUSR=$withval
-fi
+ withval="$with_install_user"
+ DSTUSR=$withval
+fi;
-
- { echo "$as_me:$LINENO: checking for install user" >&5
-echo $ECHO_N "checking for install user... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for install user" >&5
+echo $ECHO_N "checking for install user... $ECHO_C" >&6
if test "x$DSTUSR" = "x" ; then
DSTUSR=root
fi
- { echo "$as_me:$LINENO: result: $DSTUSR" >&5
-echo "${ECHO_T}$DSTUSR" >&6; }
+ echo "$as_me:$LINENO: result: $DSTUSR" >&5
+echo "${ECHO_T}$DSTUSR" >&6
-# Check whether --with-install-group was given.
+# Check whether --with-install-group or --without-install-group was given.
if test "${with_install_group+set}" = set; then
- withval=$with_install_group; DSTGRP=$withval
-fi
+ withval="$with_install_group"
+ DSTGRP=$withval
+fi;
-
- { echo "$as_me:$LINENO: checking for install group" >&5
-echo $ECHO_N "checking for install group... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for install group" >&5
+echo $ECHO_N "checking for install group... $ECHO_C" >&6
if test "x$DSTGRP" = "x" ; then
case $host_os in
@@ -4101,28 +5296,28 @@
esac
fi
- { echo "$as_me:$LINENO: result: $DSTGRP" >&5
-echo "${ECHO_T}$DSTGRP" >&6; }
+ echo "$as_me:$LINENO: result: $DSTGRP" >&5
+echo "${ECHO_T}$DSTGRP" >&6
-# Check whether --with-directory-mode was given.
+# Check whether --with-directory-mode or --without-directory-mode was given.
if test "${with_directory_mode+set}" = set; then
- withval=$with_directory_mode; DSTMODE=$withval
-fi
+ withval="$with_directory_mode"
+ DSTMODE=$withval
+fi;
-
- { echo "$as_me:$LINENO: checking what permissions to use for installation directories" >&5
-echo $ECHO_N "checking what permissions to use for installation directories... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking what permissions to use for installation directories" >&5
+echo $ECHO_N "checking what permissions to use for installation directories... $ECHO_C" >&6
if test "x$DSTMODE" = "x" ; then
DSTMODE=0775
fi
- { echo "$as_me:$LINENO: result: $DSTMODE" >&5
-echo "${ECHO_T}$DSTMODE" >&6; }
+ echo "$as_me:$LINENO: result: $DSTMODE" >&5
+echo "${ECHO_T}$DSTMODE" >&6
@@ -4132,8 +5327,8 @@
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
@@ -4167,22 +5362,24 @@
#endif
Syntax error
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
:
else
echo "$as_me: failed program was:" >&5
@@ -4191,10 +5388,9 @@
# Broken: fails on valid input.
continue
fi
-
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether nonexistent headers
+ # OK, works on sane cases. Now check whether non-existent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -4204,22 +5400,24 @@
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
# Broken: success on invalid input.
continue
else
@@ -4230,7 +5428,6 @@
ac_preproc_ok=:
break
fi
-
rm -f conftest.err conftest.$ac_ext
done
@@ -4248,8 +5445,8 @@
else
ac_cv_prog_CPP=$CPP
fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
@@ -4272,22 +5469,24 @@
#endif
Syntax error
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
:
else
echo "$as_me: failed program was:" >&5
@@ -4296,10 +5495,9 @@
# Broken: fails on valid input.
continue
fi
-
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether nonexistent headers
+ # OK, works on sane cases. Now check whether non-existent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -4309,22 +5507,24 @@
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
# Broken: success on invalid input.
continue
else
@@ -4335,7 +5535,6 @@
ac_preproc_ok=:
break
fi
-
rm -f conftest.err conftest.$ac_ext
done
@@ -4358,170 +5557,8 @@
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
- # Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_GREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_GREP=$GREP
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
- # Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_EGREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
-
- fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
if test "${ac_cv_header_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4545,32 +5582,36 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_header_stdc=no
+ac_cv_header_stdc=no
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
@@ -4625,7 +5666,6 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ctype.h>
-#include <stdlib.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -4645,27 +5685,18 @@
for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i))
|| toupper (i) != TOUPPER (i))
- return 2;
- return 0;
+ exit(2);
+ exit (0);
}
_ACEOF
rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
@@ -4678,14 +5709,12 @@
( exit $ac_status )
ac_cv_header_stdc=no
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
-
fi
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
if test $ac_cv_header_stdc = yes; then
cat >>confdefs.h <<\_ACEOF
@@ -4702,9 +5731,9 @@
ac_header_dirent=no
for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
-echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
+echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
@@ -4726,35 +5755,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- eval "$as_ac_Header=no"
+eval "$as_ac_Header=no"
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
@@ -4766,12 +5798,13 @@
done
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
- { echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for library containing opendir" >&5
+echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6
if test "${ac_cv_search_opendir+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_func_search_save_LIBS=$LIBS
+ac_cv_search_opendir=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4779,83 +5812,126 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char opendir ();
int
main ()
{
-return opendir ();
+opendir ();
;
return 0;
}
_ACEOF
-for ac_lib in '' dir; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_search_opendir=$ac_res
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_opendir="none required"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-
fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test "$ac_cv_search_opendir" = no; then
+ for ac_lib in dir; do
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext
- if test "${ac_cv_search_opendir+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_opendir+set}" = set; then
- :
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir ();
+int
+main ()
+{
+opendir ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_opendir="-l$ac_lib"
+break
else
- ac_cv_search_opendir=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+fi
LIBS=$ac_func_search_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6; }
-ac_res=$ac_cv_search_opendir
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
+echo "${ECHO_T}$ac_cv_search_opendir" >&6
+if test "$ac_cv_search_opendir" != no; then
+ test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS"
fi
else
- { echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for library containing opendir" >&5
+echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6
if test "${ac_cv_search_opendir+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_func_search_save_LIBS=$LIBS
+ac_cv_search_opendir=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4863,80 +5939,122 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char opendir ();
int
main ()
{
-return opendir ();
+opendir ();
;
return 0;
}
_ACEOF
-for ac_lib in '' x; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- ac_cv_search_opendir=$ac_res
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_opendir="none required"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-
fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test "$ac_cv_search_opendir" = no; then
+ for ac_lib in x; do
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext
- if test "${ac_cv_search_opendir+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_opendir+set}" = set; then
- :
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir ();
+int
+main ()
+{
+opendir ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_opendir="-l$ac_lib"
+break
else
- ac_cv_search_opendir=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+fi
LIBS=$ac_func_search_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6; }
-ac_res=$ac_cv_search_opendir
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
+echo "${ECHO_T}$ac_cv_search_opendir" >&6
+if test "$ac_cv_search_opendir" != no; then
+ test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS"
fi
fi
-{ echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
-echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6
if test "${ac_cv_header_sys_wait_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -4949,7 +6067,7 @@
#include <sys/types.h>
#include <sys/wait.h>
#ifndef WEXITSTATUS
-# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
+# define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
#endif
#ifndef WIFEXITED
# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
@@ -4966,34 +6084,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_header_sys_wait_h=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_header_sys_wait_h=no
+ac_cv_header_sys_wait_h=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5
-echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6
if test $ac_cv_header_sys_wait_h = yes; then
cat >>confdefs.h <<\_ACEOF
@@ -5002,8 +6124,8 @@
fi
-{ echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5
-echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5
+echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6
if test "${ac_cv_header_stat_broken+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -5016,52 +6138,42 @@
#include <sys/types.h>
#include <sys/stat.h>
-#if defined S_ISBLK && defined S_IFDIR
-extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1];
+#if defined(S_ISBLK) && defined(S_IFDIR)
+# if S_ISBLK (S_IFDIR)
+You lose.
+# endif
#endif
-#if defined S_ISBLK && defined S_IFCHR
-extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1];
+#if defined(S_ISBLK) && defined(S_IFCHR)
+# if S_ISBLK (S_IFCHR)
+You lose.
+# endif
#endif
-#if defined S_ISLNK && defined S_IFREG
-extern char c3[S_ISLNK (S_IFREG) ? -1 : 1];
+#if defined(S_ISLNK) && defined(S_IFREG)
+# if S_ISLNK (S_IFREG)
+You lose.
+# endif
#endif
-#if defined S_ISSOCK && defined S_IFREG
-extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1];
+#if defined(S_ISSOCK) && defined(S_IFREG)
+# if S_ISSOCK (S_IFREG)
+You lose.
+# endif
#endif
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "You lose" >/dev/null 2>&1; then
+ ac_cv_header_stat_broken=yes
+else
ac_cv_header_stat_broken=no
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stat_broken=yes
fi
+rm -f conftest*
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5
-echo "${ECHO_T}$ac_cv_header_stat_broken" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5
+echo "${ECHO_T}$ac_cv_header_stat_broken" >&6
if test $ac_cv_header_stat_broken = yes; then
cat >>confdefs.h <<\_ACEOF
@@ -5070,7 +6182,6 @@
fi
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
@@ -5080,96 +6191,27 @@
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- eval "$as_ac_Header=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-fi
-done
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
for ac_header in limits.h paths.h sys/file.h crt_externs.h fcntl.h sys/fcntl.h sys/cdefs.h err.h libgen.h sys/socket.h \
readline/readline.h readline/history.h pwd.h sys/paths.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
else
# Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -5180,37 +6222,41 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_header_compiler=no
+ac_header_compiler=no
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -5219,22 +6265,24 @@
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
@@ -5242,10 +6290,9 @@
ac_header_preproc=no
fi
-
rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -5269,24 +6316,25 @@
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
+ (
+ cat <<\_ASBOX
## ------------------------------------------------ ##
## Report this to macports-dev at lists.macosforge.org ##
## ------------------------------------------------ ##
_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
@@ -5302,8 +6350,8 @@
INCLUDES="-I.. -I. $INCLUDES"
# Checks for library functions.
-{ echo "$as_me:$LINENO: checking whether closedir returns void" >&5
-echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether closedir returns void" >&5
+echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6
if test "${ac_cv_func_closedir_void+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -5325,28 +6373,19 @@
int
main ()
{
-return closedir (opendir (".")) != 0;
+exit (closedir (opendir (".")) != 0);
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
@@ -5359,13 +6398,11 @@
( exit $ac_status )
ac_cv_func_closedir_void=yes
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
-
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5
-echo "${ECHO_T}$ac_cv_func_closedir_void" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5
+echo "${ECHO_T}$ac_cv_func_closedir_void" >&6
if test $ac_cv_func_closedir_void = yes; then
cat >>confdefs.h <<\_ACEOF
@@ -5374,8 +6411,8 @@
fi
-{ echo "$as_me:$LINENO: checking for pid_t" >&5
-echo $ECHO_N "checking for pid_t... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for pid_t" >&5
+echo $ECHO_N "checking for pid_t... $ECHO_C" >&6
if test "${ac_cv_type_pid_t+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -5386,47 +6423,50 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
-typedef pid_t ac__type_new_;
int
main ()
{
-if ((ac__type_new_ *) 0)
+if ((pid_t *) 0)
return 0;
-if (sizeof (ac__type_new_))
+if (sizeof (pid_t))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_type_pid_t=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_type_pid_t=no
+ac_cv_type_pid_t=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
-echo "${ECHO_T}$ac_cv_type_pid_t" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
+echo "${ECHO_T}$ac_cv_type_pid_t" >&6
if test $ac_cv_type_pid_t = yes; then
:
else
@@ -5438,22 +6478,22 @@
fi
-for ac_header in vfork.h
+
+for ac_header in unistd.h vfork.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
else
# Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -5464,37 +6504,41 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_header_compiler=no
+ac_header_compiler=no
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -5503,22 +6547,24 @@
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
@@ -5526,10 +6572,9 @@
ac_header_preproc=no
fi
-
rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -5553,24 +6598,25 @@
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
+ (
+ cat <<\_ASBOX
## ------------------------------------------------ ##
## Report this to macports-dev at lists.macosforge.org ##
## ------------------------------------------------ ##
_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
@@ -5587,9 +6633,9 @@
for ac_func in fork vfork
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
@@ -5615,60 +6661,68 @@
#undef $ac_func
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char $ac_func ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
+#else
+char (*f) () = $ac_func;
#endif
+#ifdef __cplusplus
+}
+#endif
int
main ()
{
-return $ac_func ();
+return f != $ac_func;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- eval "$as_ac_var=no"
+eval "$as_ac_var=no"
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
if test `eval echo '${'$as_ac_var'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
@@ -5678,8 +6732,8 @@
done
if test "x$ac_cv_func_fork" = xyes; then
- { echo "$as_me:$LINENO: checking for working fork" >&5
-echo $ECHO_N "checking for working fork... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for working fork" >&5
+echo $ECHO_N "checking for working fork... $ECHO_C" >&6
if test "${ac_cv_func_fork_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -5687,40 +6741,27 @@
ac_cv_func_fork_works=cross
else
cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+/* By Ruediger Kuhlmann. */
+ #include <sys/types.h>
+ #if HAVE_UNISTD_H
+ # include <unistd.h>
+ #endif
+ /* Some systems only have a dummy stub for fork() */
+ int main ()
+ {
+ if (fork() < 0)
+ exit (1);
+ exit (0);
+ }
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-
- /* By Ruediger Kuhlmann. */
- return fork () < 0;
-
- ;
- return 0;
-}
-_ACEOF
rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
@@ -5733,13 +6774,11 @@
( exit $ac_status )
ac_cv_func_fork_works=no
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
-
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5
-echo "${ECHO_T}$ac_cv_func_fork_works" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5
+echo "${ECHO_T}$ac_cv_func_fork_works" >&6
else
ac_cv_func_fork_works=$ac_cv_func_fork
@@ -5759,8 +6798,8 @@
fi
ac_cv_func_vfork_works=$ac_cv_func_vfork
if test "x$ac_cv_func_vfork" = xyes; then
- { echo "$as_me:$LINENO: checking for working vfork" >&5
-echo $ECHO_N "checking for working vfork... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for working vfork" >&5
+echo $ECHO_N "checking for working vfork... $ECHO_C" >&6
if test "${ac_cv_func_vfork_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -5774,9 +6813,15 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Thanks to Paul Eggert for this test. */
-$ac_includes_default
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
#include <sys/wait.h>
-#ifdef HAVE_VFORK_H
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+#if HAVE_VFORK_H
# include <vfork.h>
#endif
/* On some sparc systems, changes by the child to local and incoming
@@ -5847,7 +6892,7 @@
while (wait(&status) != child)
;
- return (
+ exit(
/* Was there some problem with vforking? */
child < 0
@@ -5864,22 +6909,13 @@
}
_ACEOF
rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
@@ -5892,13 +6928,11 @@
( exit $ac_status )
ac_cv_func_vfork_works=no
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
-
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5
-echo "${ECHO_T}$ac_cv_func_vfork_works" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5
+echo "${ECHO_T}$ac_cv_func_vfork_works" >&6
fi;
if test "x$ac_cv_func_fork_works" = xcross; then
@@ -5928,8 +6962,8 @@
fi
-{ echo "$as_me:$LINENO: checking whether strerror_r is declared" >&5
-echo $ECHO_N "checking whether strerror_r is declared... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether strerror_r is declared" >&5
+echo $ECHO_N "checking whether strerror_r is declared... $ECHO_C" >&6
if test "${ac_cv_have_decl_strerror_r+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -5944,7 +6978,7 @@
main ()
{
#ifndef strerror_r
- (void) strerror_r;
+ char *p = (char *) strerror_r;
#endif
;
@@ -5952,34 +6986,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_have_decl_strerror_r=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_have_decl_strerror_r=no
+ac_cv_have_decl_strerror_r=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_strerror_r" >&5
-echo "${ECHO_T}$ac_cv_have_decl_strerror_r" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_strerror_r" >&5
+echo "${ECHO_T}$ac_cv_have_decl_strerror_r" >&6
if test $ac_cv_have_decl_strerror_r = yes; then
cat >>confdefs.h <<_ACEOF
@@ -6000,9 +7038,9 @@
for ac_func in strerror_r
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
@@ -6028,60 +7066,68 @@
#undef $ac_func
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char $ac_func ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
+#else
+char (*f) () = $ac_func;
#endif
+#ifdef __cplusplus
+}
+#endif
int
main ()
{
-return $ac_func ();
+return f != $ac_func;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- eval "$as_ac_var=no"
+eval "$as_ac_var=no"
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
if test `eval echo '${'$as_ac_var'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
@@ -6090,8 +7136,8 @@
fi
done
-{ echo "$as_me:$LINENO: checking whether strerror_r returns char *" >&5
-echo $ECHO_N "checking whether strerror_r returns char *... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether strerror_r returns char *" >&5
+echo $ECHO_N "checking whether strerror_r returns char *... $ECHO_C" >&6
if test "${ac_cv_func_strerror_r_char_p+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -6112,38 +7158,40 @@
char buf[100];
char x = *strerror_r (0, buf, sizeof buf);
char *p = strerror_r (0, buf, sizeof buf);
- return !p || x;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_func_strerror_r_char_p=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
else
# strerror_r is not declared. Choose between
# systems that have relatively inaccessible declarations for the
@@ -6167,28 +7215,19 @@
{
char buf[100];
char x = *strerror_r (0, buf, sizeof buf);
- return ! isalpha (x);
+ exit (!isalpha (x));
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
@@ -6199,15 +7238,13 @@
sed 's/^/| /' conftest.$ac_ext >&5
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
-
fi
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_strerror_r_char_p" >&5
-echo "${ECHO_T}$ac_cv_func_strerror_r_char_p" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_strerror_r_char_p" >&5
+echo "${ECHO_T}$ac_cv_func_strerror_r_char_p" >&6
if test $ac_cv_func_strerror_r_char_p = yes; then
cat >>confdefs.h <<\_ACEOF
@@ -6234,9 +7271,9 @@
for ac_func in bzero memset dup2 regcomp strdup strerror strtol fgetln lockf flock setmode strcasecmp strncasecmp strlcpy copyfile
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
@@ -6262,60 +7299,68 @@
#undef $ac_func
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char $ac_func ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
+#else
+char (*f) () = $ac_func;
#endif
+#ifdef __cplusplus
+}
+#endif
int
main ()
{
-return $ac_func ();
+return f != $ac_func;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- eval "$as_ac_var=no"
+eval "$as_ac_var=no"
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
if test `eval echo '${'$as_ac_var'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
@@ -6325,8 +7370,8 @@
done
- { echo "$as_me:$LINENO: checking if readlink conforms to POSIX 1003.1a" >&5
-echo $ECHO_N "checking if readlink conforms to POSIX 1003.1a... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking if readlink conforms to POSIX 1003.1a" >&5
+echo $ECHO_N "checking if readlink conforms to POSIX 1003.1a... $ECHO_C" >&6
if test "${dp_cv_readlink_is_posix_1003_1a+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -6354,22 +7399,27 @@
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
dp_cv_readlink_is_posix_1003_1a="yes"
@@ -6382,14 +7432,13 @@
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
fi
- { echo "$as_me:$LINENO: result: ${dp_cv_readlink_is_posix_1003_1a}" >&5
-echo "${ECHO_T}${dp_cv_readlink_is_posix_1003_1a}" >&6; }
+ echo "$as_me:$LINENO: result: ${dp_cv_readlink_is_posix_1003_1a}" >&5
+echo "${ECHO_T}${dp_cv_readlink_is_posix_1003_1a}" >&6
if test x"${dp_cv_readlink_is_posix_1003_1a}" = "xno"; then
@@ -6406,8 +7455,8 @@
# Check for libmd, which is prefered
- { echo "$as_me:$LINENO: checking for MD5Update in -lmd" >&5
-echo $ECHO_N "checking for MD5Update in -lmd... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for MD5Update in -lmd" >&5
+echo $ECHO_N "checking for MD5Update in -lmd... $ECHO_C" >&6
if test "${ac_cv_lib_md_MD5Update+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -6420,72 +7469,74 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char MD5Update ();
int
main ()
{
-return MD5Update ();
+MD5Update ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_md_MD5Update=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_md_MD5Update=no
+ac_cv_lib_md_MD5Update=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_md_MD5Update" >&5
-echo "${ECHO_T}$ac_cv_lib_md_MD5Update" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_md_MD5Update" >&5
+echo "${ECHO_T}$ac_cv_lib_md_MD5Update" >&6
if test $ac_cv_lib_md_MD5Update = yes; then
for ac_header in md5.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
else
# Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -6496,37 +7547,41 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_header_compiler=no
+ac_header_compiler=no
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -6535,22 +7590,24 @@
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
@@ -6558,10 +7615,9 @@
ac_header_preproc=no
fi
-
rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -6585,24 +7641,25 @@
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
+ (
+ cat <<\_ASBOX
## ------------------------------------------------ ##
## Report this to macports-dev at lists.macosforge.org ##
## ------------------------------------------------ ##
_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
@@ -6641,8 +7698,8 @@
if test "x$MD5_LIBS" = "x" ; then
# If libmd is not found, check for libcrypto from OpenSSL
- { echo "$as_me:$LINENO: checking for MD5_Update in -lcrypto" >&5
-echo $ECHO_N "checking for MD5_Update in -lcrypto... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for MD5_Update in -lcrypto" >&5
+echo $ECHO_N "checking for MD5_Update in -lcrypto... $ECHO_C" >&6
if test "${ac_cv_lib_crypto_MD5_Update+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -6655,72 +7712,74 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char MD5_Update ();
int
main ()
{
-return MD5_Update ();
+MD5_Update ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_crypto_MD5_Update=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_crypto_MD5_Update=no
+ac_cv_lib_crypto_MD5_Update=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_crypto_MD5_Update" >&5
-echo "${ECHO_T}$ac_cv_lib_crypto_MD5_Update" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_crypto_MD5_Update" >&5
+echo "${ECHO_T}$ac_cv_lib_crypto_MD5_Update" >&6
if test $ac_cv_lib_crypto_MD5_Update = yes; then
for ac_header in openssl/md5.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
else
# Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -6731,37 +7790,41 @@
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_header_compiler=no
+ac_header_compiler=no
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -6770,22 +7833,24 @@
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
@@ -6793,10 +7858,9 @@
ac_header_preproc=no
fi
-
rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -6820,24 +7884,25 @@
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
+ (
+ cat <<\_ASBOX
## ------------------------------------------------ ##
## Report this to macports-dev at lists.macosforge.org ##
## ------------------------------------------------ ##
_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
@@ -6889,49 +7954,44 @@
# Check for X11 and paraphernalia
-{ echo "$as_me:$LINENO: checking for X" >&5
-echo $ECHO_N "checking for X... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for X" >&5
+echo $ECHO_N "checking for X... $ECHO_C" >&6
-# Check whether --with-x was given.
+# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
- withval=$with_x;
-fi
+ withval="$with_x"
+fi;
# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
if test "x$with_x" = xno; then
# The user explicitly disabled X.
have_x=disabled
else
- case $x_includes,$x_libraries in #(
- *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5
-echo "$as_me: error: Cannot use X directory names containing '" >&2;}
- { (exit 1); exit 1; }; };; #(
- *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ # Both variables are already set.
+ have_x=yes
+ else
+ if test "${ac_cv_have_x+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# One or both of the vars are not set, and there is no cached value.
ac_x_includes=no ac_x_libraries=no
-rm -f -r conftest.dir
+rm -fr conftest.dir
if mkdir conftest.dir; then
cd conftest.dir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
cat >Imakefile <<'_ACEOF'
-incroot:
- @echo incroot='${INCROOT}'
-usrlibdir:
- @echo usrlibdir='${USRLIBDIR}'
-libdir:
- @echo libdir='${LIBDIR}'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
_ACEOF
- if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- for ac_var in incroot usrlibdir libdir; do
- eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
- done
+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
# Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
for ac_extension in a so sl; do
- if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" &&
- test -f "$ac_im_libdir/libX11.$ac_extension"; then
+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+ test -f $ac_im_libdir/libX11.$ac_extension; then
ac_im_usrlibdir=$ac_im_libdir; break
fi
done
@@ -6939,7 +7999,7 @@
# bogus both because they are the default anyway, and because
# using them would break gcc on systems where it needs fixed includes.
case $ac_im_incroot in
- /usr/include) ac_x_includes= ;;
+ /usr/include) ;;
*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
esac
case $ac_im_usrlibdir in
@@ -6948,7 +8008,7 @@
esac
fi
cd ..
- rm -f -r conftest.dir
+ rm -fr conftest.dir
fi
# Standard set of common directories for X headers.
@@ -6989,7 +8049,7 @@
/usr/openwin/share/include'
if test "$ac_x_includes" = no; then
- # Guess where to find include files, by looking for Xlib.h.
+ # Guess where to find include files, by looking for Intrinsic.h.
# First, try using that file with no special directory specified.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
@@ -6997,24 +8057,26 @@
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <X11/Xlib.h>
+#include <X11/Intrinsic.h>
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
# We can compile using X headers with no special include directory.
ac_x_includes=
else
@@ -7022,13 +8084,12 @@
sed 's/^/| /' conftest.$ac_ext >&5
for ac_dir in $ac_x_header_dirs; do
- if test -r "$ac_dir/X11/Xlib.h"; then
+ if test -r "$ac_dir/X11/Intrinsic.h"; then
ac_x_includes=$ac_dir
break
fi
done
fi
-
rm -f conftest.err conftest.$ac_ext
fi # $ac_x_includes = no
@@ -7037,40 +8098,44 @@
# See if we find them without any special options.
# Don't add to $LIBS permanently.
ac_save_LIBS=$LIBS
- LIBS="-lX11 $LIBS"
+ LIBS="-lXt $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <X11/Xlib.h>
+#include <X11/Intrinsic.h>
int
main ()
{
-XrmInitialize ()
+XtMalloc (0)
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
LIBS=$ac_save_LIBS
# We can link X programs with no special library path.
ac_x_libraries=
@@ -7078,54 +8143,49 @@
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- LIBS=$ac_save_LIBS
+LIBS=$ac_save_LIBS
for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
do
# Don't even attempt the hair of trying to link an X program!
for ac_extension in a so sl; do
- if test -r "$ac_dir/libX11.$ac_extension"; then
+ if test -r $ac_dir/libXt.$ac_extension; then
ac_x_libraries=$ac_dir
break 2
fi
done
done
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi # $ac_x_libraries = no
-case $ac_x_includes,$ac_x_libraries in #(
- no,* | *,no | *\'*)
- # Didn't find X, or a directory has "'" in its name.
- ac_cv_have_x="have_x=no";; #(
- *)
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes\
- ac_x_includes='$ac_x_includes'\
- ac_x_libraries='$ac_x_libraries'"
-esac
+if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then
+ # Didn't find X anywhere. Cache the known absence of X.
+ ac_cv_have_x="have_x=no"
+else
+ # Record where we found X for the cache.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
fi
-;; #(
- *) have_x=yes;;
- esac
+fi
+
+ fi
eval "$ac_cv_have_x"
fi # $with_x != no
if test "$have_x" != yes; then
- { echo "$as_me:$LINENO: result: $have_x" >&5
-echo "${ECHO_T}$have_x" >&6; }
+ echo "$as_me:$LINENO: result: $have_x" >&5
+echo "${ECHO_T}$have_x" >&6
no_x=yes
else
# If each of the values was on the command line, it overrides each guess.
test "x$x_includes" = xNONE && x_includes=$ac_x_includes
test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
# Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes\
- ac_x_includes='$x_includes'\
- ac_x_libraries='$x_libraries'"
- { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
-echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; }
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+ echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
+echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6
fi
@@ -7148,12 +8208,12 @@
X_LIBS="$X_LIBS -L$x_libraries"
# For Solaris; some versions of Sun CC require a space after -R and
# others require no space. Words are not sufficient . . . .
- { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5
-echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; }
- ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
- ac_xsave_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- cat >conftest.$ac_ext <<_ACEOF
+ case `(uname -sr) 2>/dev/null` in
+ "SunOS 5"*)
+ echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5
+echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6
+ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -7169,32 +8229,43 @@
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- X_LIBS="$X_LIBS -R$x_libraries"
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_R_nospace=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+ac_R_nospace=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test $ac_R_nospace = yes; then
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ X_LIBS="$X_LIBS -R$x_libraries"
+ else
LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -7210,42 +8281,47 @@
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- X_LIBS="$X_LIBS -R $x_libraries"
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_R_space=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- { echo "$as_me:$LINENO: result: neither works" >&5
-echo "${ECHO_T}neither works" >&6; }
+ac_R_space=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- ac_c_werror_flag=$ac_xsave_c_werror_flag
- LIBS=$ac_xsave_LIBS
+ if test $ac_R_space = yes; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ X_LIBS="$X_LIBS -R $x_libraries"
+ else
+ echo "$as_me:$LINENO: result: neither works" >&5
+echo "${ECHO_T}neither works" >&6
+ fi
+ fi
+ LIBS=$ac_xsave_LIBS
+ esac
fi
# Check for system-dependent libraries X programs must link with.
@@ -7266,46 +8342,50 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char XOpenDisplay ();
int
main ()
{
-return XOpenDisplay ();
+XOpenDisplay ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
:
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5
-echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5
+echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6
if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7318,60 +8398,63 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char dnet_ntoa ();
int
main ()
{
-return dnet_ntoa ();
+dnet_ntoa ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_dnet_dnet_ntoa=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_dnet_dnet_ntoa=no
+ac_cv_lib_dnet_dnet_ntoa=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
-echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
+echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6
if test $ac_cv_lib_dnet_dnet_ntoa = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
fi
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5
-echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5
+echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6
if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7384,61 +8467,63 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char dnet_ntoa ();
int
main ()
{
-return dnet_ntoa ();
+dnet_ntoa ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_dnet_stub_dnet_ntoa=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_dnet_stub_dnet_ntoa=no
+ac_cv_lib_dnet_stub_dnet_ntoa=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
-echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
+echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6
if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
fi
fi
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_xsave_LIBS"
@@ -7450,8 +8535,8 @@
# on Irix 5.2, according to T.E. Dickey.
# The functions gethostbyname, getservbyname, and inet_addr are
# in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking.
- { echo "$as_me:$LINENO: checking for gethostbyname" >&5
-echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for gethostbyname" >&5
+echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6
if test "${ac_cv_func_gethostbyname+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7478,63 +8563,72 @@
#undef gethostbyname
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char gethostbyname ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined __stub_gethostbyname || defined __stub___gethostbyname
+#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
choke me
+#else
+char (*f) () = gethostbyname;
#endif
+#ifdef __cplusplus
+}
+#endif
int
main ()
{
-return gethostbyname ();
+return f != gethostbyname;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_func_gethostbyname=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_func_gethostbyname=no
+ac_cv_func_gethostbyname=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
-echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6
if test $ac_cv_func_gethostbyname = no; then
- { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
-echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
+echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6
if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7547,60 +8641,63 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char gethostbyname ();
int
main ()
{
-return gethostbyname ();
+gethostbyname ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_nsl_gethostbyname=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_nsl_gethostbyname=no
+ac_cv_lib_nsl_gethostbyname=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
-echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6
if test $ac_cv_lib_nsl_gethostbyname = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
fi
if test $ac_cv_lib_nsl_gethostbyname = no; then
- { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5
-echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5
+echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6
if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7613,53 +8710,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char gethostbyname ();
int
main ()
{
-return gethostbyname ();
+gethostbyname ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_bsd_gethostbyname=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_bsd_gethostbyname=no
+ac_cv_lib_bsd_gethostbyname=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5
-echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6
if test $ac_cv_lib_bsd_gethostbyname = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
fi
@@ -7674,8 +8774,8 @@
# variants that don't use the name server (or something). -lsocket
# must be given before -lnsl if both are needed. We assume that
# if connect needs -lnsl, so does gethostbyname.
- { echo "$as_me:$LINENO: checking for connect" >&5
-echo $ECHO_N "checking for connect... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for connect" >&5
+echo $ECHO_N "checking for connect... $ECHO_C" >&6
if test "${ac_cv_func_connect+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7702,63 +8802,72 @@
#undef connect
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char connect ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined __stub_connect || defined __stub___connect
+#if defined (__stub_connect) || defined (__stub___connect)
choke me
+#else
+char (*f) () = connect;
#endif
+#ifdef __cplusplus
+}
+#endif
int
main ()
{
-return connect ();
+return f != connect;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_func_connect=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_func_connect=no
+ac_cv_func_connect=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5
-echo "${ECHO_T}$ac_cv_func_connect" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5
+echo "${ECHO_T}$ac_cv_func_connect" >&6
if test $ac_cv_func_connect = no; then
- { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5
-echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for connect in -lsocket" >&5
+echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6
if test "${ac_cv_lib_socket_connect+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7771,53 +8880,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char connect ();
int
main ()
{
-return connect ();
+connect ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_socket_connect=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_socket_connect=no
+ac_cv_lib_socket_connect=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5
-echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5
+echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6
if test $ac_cv_lib_socket_connect = yes; then
X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
fi
@@ -7825,8 +8937,8 @@
fi
# Guillermo Gomez says -lposix is necessary on A/UX.
- { echo "$as_me:$LINENO: checking for remove" >&5
-echo $ECHO_N "checking for remove... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for remove" >&5
+echo $ECHO_N "checking for remove... $ECHO_C" >&6
if test "${ac_cv_func_remove+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7853,63 +8965,72 @@
#undef remove
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char remove ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined __stub_remove || defined __stub___remove
+#if defined (__stub_remove) || defined (__stub___remove)
choke me
+#else
+char (*f) () = remove;
#endif
+#ifdef __cplusplus
+}
+#endif
int
main ()
{
-return remove ();
+return f != remove;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_func_remove=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_func_remove=no
+ac_cv_func_remove=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5
-echo "${ECHO_T}$ac_cv_func_remove" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5
+echo "${ECHO_T}$ac_cv_func_remove" >&6
if test $ac_cv_func_remove = no; then
- { echo "$as_me:$LINENO: checking for remove in -lposix" >&5
-echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for remove in -lposix" >&5
+echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6
if test "${ac_cv_lib_posix_remove+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -7922,53 +9043,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char remove ();
int
main ()
{
-return remove ();
+remove ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_posix_remove=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_posix_remove=no
+ac_cv_lib_posix_remove=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5
-echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5
+echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6
if test $ac_cv_lib_posix_remove = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
fi
@@ -7976,8 +9100,8 @@
fi
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- { echo "$as_me:$LINENO: checking for shmat" >&5
-echo $ECHO_N "checking for shmat... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for shmat" >&5
+echo $ECHO_N "checking for shmat... $ECHO_C" >&6
if test "${ac_cv_func_shmat+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8004,63 +9128,72 @@
#undef shmat
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
+{
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char shmat ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined __stub_shmat || defined __stub___shmat
+#if defined (__stub_shmat) || defined (__stub___shmat)
choke me
+#else
+char (*f) () = shmat;
#endif
+#ifdef __cplusplus
+}
+#endif
int
main ()
{
-return shmat ();
+return f != shmat;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_func_shmat=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_func_shmat=no
+ac_cv_func_shmat=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5
-echo "${ECHO_T}$ac_cv_func_shmat" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5
+echo "${ECHO_T}$ac_cv_func_shmat" >&6
if test $ac_cv_func_shmat = no; then
- { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5
-echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for shmat in -lipc" >&5
+echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6
if test "${ac_cv_lib_ipc_shmat+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8073,53 +9206,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char shmat ();
int
main ()
{
-return shmat ();
+shmat ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_ipc_shmat=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_ipc_shmat=no
+ac_cv_lib_ipc_shmat=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5
-echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5
+echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6
if test $ac_cv_lib_ipc_shmat = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
fi
@@ -8136,8 +9272,8 @@
# These have to be linked with before -lX11, unlike the other
# libraries we check for below, so use a different variable.
# John Interrante, Karl Berry
- { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5
-echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5
+echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6
if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8150,53 +9286,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char IceConnectionNumber ();
int
main ()
{
-return IceConnectionNumber ();
+IceConnectionNumber ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_ICE_IceConnectionNumber=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_ICE_IceConnectionNumber=no
+ac_cv_lib_ICE_IceConnectionNumber=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
-echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
+echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6
if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then
X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
fi
@@ -8207,8 +9346,8 @@
# Check for libX11
- { echo "$as_me:$LINENO: checking for XOpenDisplay in -lX11" >&5
-echo $ECHO_N "checking for XOpenDisplay in -lX11... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for XOpenDisplay in -lX11" >&5
+echo $ECHO_N "checking for XOpenDisplay in -lX11... $ECHO_C" >&6
if test "${ac_cv_lib_X11_XOpenDisplay+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8221,53 +9360,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char XOpenDisplay ();
int
main ()
{
-return XOpenDisplay ();
+XOpenDisplay ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_X11_XOpenDisplay=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_X11_XOpenDisplay=no
+ac_cv_lib_X11_XOpenDisplay=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XOpenDisplay" >&5
-echo "${ECHO_T}$ac_cv_lib_X11_XOpenDisplay" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XOpenDisplay" >&5
+echo "${ECHO_T}$ac_cv_lib_X11_XOpenDisplay" >&6
if test $ac_cv_lib_X11_XOpenDisplay = yes; then
has_x_runtime=yes
@@ -8361,8 +9503,8 @@
# Check for readline
-{ echo "$as_me:$LINENO: checking for readline in -lreadline" >&5
-echo $ECHO_N "checking for readline in -lreadline... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for readline in -lreadline" >&5
+echo $ECHO_N "checking for readline in -lreadline... $ECHO_C" >&6
if test "${ac_cv_lib_readline_readline+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8375,53 +9517,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char readline ();
int
main ()
{
-return readline ();
+readline ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_readline_readline=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_readline_readline=no
+ac_cv_lib_readline_readline=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_readline_readline" >&5
-echo "${ECHO_T}$ac_cv_lib_readline_readline" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_readline_readline" >&5
+echo "${ECHO_T}$ac_cv_lib_readline_readline" >&6
if test $ac_cv_lib_readline_readline = yes; then
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBREADLINE 1
@@ -8431,8 +9576,8 @@
fi
-{ echo "$as_me:$LINENO: checking whether rl_username_completion_function is declared" >&5
-echo $ECHO_N "checking whether rl_username_completion_function is declared... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether rl_username_completion_function is declared" >&5
+echo $ECHO_N "checking whether rl_username_completion_function is declared... $ECHO_C" >&6
if test "${ac_cv_have_decl_rl_username_completion_function+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8453,7 +9598,7 @@
main ()
{
#ifndef rl_username_completion_function
- (void) rl_username_completion_function;
+ char *p = (char *) rl_username_completion_function;
#endif
;
@@ -8461,34 +9606,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_have_decl_rl_username_completion_function=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_have_decl_rl_username_completion_function=no
+ac_cv_have_decl_rl_username_completion_function=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_rl_username_completion_function" >&5
-echo "${ECHO_T}$ac_cv_have_decl_rl_username_completion_function" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_rl_username_completion_function" >&5
+echo "${ECHO_T}$ac_cv_have_decl_rl_username_completion_function" >&6
if test $ac_cv_have_decl_rl_username_completion_function = yes; then
cat >>confdefs.h <<_ACEOF
@@ -8503,8 +9652,8 @@
fi
-{ echo "$as_me:$LINENO: checking whether rl_filename_completion_function is declared" >&5
-echo $ECHO_N "checking whether rl_filename_completion_function is declared... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether rl_filename_completion_function is declared" >&5
+echo $ECHO_N "checking whether rl_filename_completion_function is declared... $ECHO_C" >&6
if test "${ac_cv_have_decl_rl_filename_completion_function+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8525,7 +9674,7 @@
main ()
{
#ifndef rl_filename_completion_function
- (void) rl_filename_completion_function;
+ char *p = (char *) rl_filename_completion_function;
#endif
;
@@ -8533,34 +9682,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_have_decl_rl_filename_completion_function=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_have_decl_rl_filename_completion_function=no
+ac_cv_have_decl_rl_filename_completion_function=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_rl_filename_completion_function" >&5
-echo "${ECHO_T}$ac_cv_have_decl_rl_filename_completion_function" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_rl_filename_completion_function" >&5
+echo "${ECHO_T}$ac_cv_have_decl_rl_filename_completion_function" >&6
if test $ac_cv_have_decl_rl_filename_completion_function = yes; then
cat >>confdefs.h <<_ACEOF
@@ -8575,8 +9728,8 @@
fi
-{ echo "$as_me:$LINENO: checking whether rl_completion_matches is declared" >&5
-echo $ECHO_N "checking whether rl_completion_matches is declared... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether rl_completion_matches is declared" >&5
+echo $ECHO_N "checking whether rl_completion_matches is declared... $ECHO_C" >&6
if test "${ac_cv_have_decl_rl_completion_matches+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8597,7 +9750,7 @@
main ()
{
#ifndef rl_completion_matches
- (void) rl_completion_matches;
+ char *p = (char *) rl_completion_matches;
#endif
;
@@ -8605,34 +9758,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_have_decl_rl_completion_matches=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_have_decl_rl_completion_matches=no
+ac_cv_have_decl_rl_completion_matches=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_rl_completion_matches" >&5
-echo "${ECHO_T}$ac_cv_have_decl_rl_completion_matches" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_rl_completion_matches" >&5
+echo "${ECHO_T}$ac_cv_have_decl_rl_completion_matches" >&6
if test $ac_cv_have_decl_rl_completion_matches = yes; then
cat >>confdefs.h <<_ACEOF
@@ -8647,8 +9804,8 @@
fi
-{ echo "$as_me:$LINENO: checking whether username_completion_function is declared" >&5
-echo $ECHO_N "checking whether username_completion_function is declared... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether username_completion_function is declared" >&5
+echo $ECHO_N "checking whether username_completion_function is declared... $ECHO_C" >&6
if test "${ac_cv_have_decl_username_completion_function+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8669,7 +9826,7 @@
main ()
{
#ifndef username_completion_function
- (void) username_completion_function;
+ char *p = (char *) username_completion_function;
#endif
;
@@ -8677,34 +9834,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_have_decl_username_completion_function=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_have_decl_username_completion_function=no
+ac_cv_have_decl_username_completion_function=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_username_completion_function" >&5
-echo "${ECHO_T}$ac_cv_have_decl_username_completion_function" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_username_completion_function" >&5
+echo "${ECHO_T}$ac_cv_have_decl_username_completion_function" >&6
if test $ac_cv_have_decl_username_completion_function = yes; then
cat >>confdefs.h <<_ACEOF
@@ -8719,8 +9880,8 @@
fi
-{ echo "$as_me:$LINENO: checking whether filename_completion_function is declared" >&5
-echo $ECHO_N "checking whether filename_completion_function is declared... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether filename_completion_function is declared" >&5
+echo $ECHO_N "checking whether filename_completion_function is declared... $ECHO_C" >&6
if test "${ac_cv_have_decl_filename_completion_function+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8741,7 +9902,7 @@
main ()
{
#ifndef filename_completion_function
- (void) filename_completion_function;
+ char *p = (char *) filename_completion_function;
#endif
;
@@ -8749,34 +9910,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_have_decl_filename_completion_function=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_have_decl_filename_completion_function=no
+ac_cv_have_decl_filename_completion_function=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_filename_completion_function" >&5
-echo "${ECHO_T}$ac_cv_have_decl_filename_completion_function" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_filename_completion_function" >&5
+echo "${ECHO_T}$ac_cv_have_decl_filename_completion_function" >&6
if test $ac_cv_have_decl_filename_completion_function = yes; then
cat >>confdefs.h <<_ACEOF
@@ -8791,8 +9956,8 @@
fi
-{ echo "$as_me:$LINENO: checking whether completion_matches is declared" >&5
-echo $ECHO_N "checking whether completion_matches is declared... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether completion_matches is declared" >&5
+echo $ECHO_N "checking whether completion_matches is declared... $ECHO_C" >&6
if test "${ac_cv_have_decl_completion_matches+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8813,7 +9978,7 @@
main ()
{
#ifndef completion_matches
- (void) completion_matches;
+ char *p = (char *) completion_matches;
#endif
;
@@ -8821,34 +9986,38 @@
}
_ACEOF
rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_have_decl_completion_matches=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_have_decl_completion_matches=no
+ac_cv_have_decl_completion_matches=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_completion_matches" >&5
-echo "${ECHO_T}$ac_cv_have_decl_completion_matches" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_completion_matches" >&5
+echo "${ECHO_T}$ac_cv_have_decl_completion_matches" >&6
if test $ac_cv_have_decl_completion_matches = yes; then
cat >>confdefs.h <<_ACEOF
@@ -8890,13 +10059,13 @@
# we reset no_tcl in case something fails here
no_tcl=true
-# Check whether --with-tcl was given.
+# Check whether --with-tcl or --without-tcl was given.
if test "${with_tcl+set}" = set; then
- withval=$with_tcl; with_tclconfig=${withval}
-fi
-
- { echo "$as_me:$LINENO: checking for Tcl configuration" >&5
-echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6; }
+ withval="$with_tcl"
+ with_tclconfig=${withval}
+fi;
+ echo "$as_me:$LINENO: checking for Tcl configuration" >&5
+echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6
if test "${ac_cv_c_tclconfig+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -8972,22 +10141,22 @@
else
no_tcl=
TCL_BIN_DIR=${ac_cv_c_tclconfig}
- { echo "$as_me:$LINENO: result: found $TCL_BIN_DIR/tclConfig.sh" >&5
-echo "${ECHO_T}found $TCL_BIN_DIR/tclConfig.sh" >&6; }
+ echo "$as_me:$LINENO: result: found $TCL_BIN_DIR/tclConfig.sh" >&5
+echo "${ECHO_T}found $TCL_BIN_DIR/tclConfig.sh" >&6
fi
fi
- { echo "$as_me:$LINENO: checking for existence of $TCL_BIN_DIR/tclConfig.sh" >&5
-echo $ECHO_N "checking for existence of $TCL_BIN_DIR/tclConfig.sh... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for existence of $TCL_BIN_DIR/tclConfig.sh" >&5
+echo $ECHO_N "checking for existence of $TCL_BIN_DIR/tclConfig.sh... $ECHO_C" >&6
if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then
- { echo "$as_me:$LINENO: result: loading" >&5
-echo "${ECHO_T}loading" >&6; }
+ echo "$as_me:$LINENO: result: loading" >&5
+echo "${ECHO_T}loading" >&6
. $TCL_BIN_DIR/tclConfig.sh
else
- { echo "$as_me:$LINENO: result: file not found" >&5
-echo "${ECHO_T}file not found" >&6; }
+ echo "$as_me:$LINENO: result: file not found" >&5
+echo "${ECHO_T}file not found" >&6
fi
#
@@ -9033,16 +10202,16 @@
# Check for Tcl public headers
CYGPATH=echo
- { echo "$as_me:$LINENO: checking for Tcl public headers" >&5
-echo $ECHO_N "checking for Tcl public headers... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for Tcl public headers" >&5
+echo $ECHO_N "checking for Tcl public headers... $ECHO_C" >&6
-# Check whether --with-tclinclude was given.
+# Check whether --with-tclinclude or --without-tclinclude was given.
if test "${with_tclinclude+set}" = set; then
- withval=$with_tclinclude; with_tclinclude=${withval}
-fi
+ withval="$with_tclinclude"
+ with_tclinclude=${withval}
+fi;
-
if test x"${with_tclinclude}" != x ; then
if test -f "${with_tclinclude}/tcl.h" ; then
ac_cv_c_tclh=${with_tclinclude}
@@ -9086,8 +10255,8 @@
echo "$as_me: error: tcl.h not found. Please specify its location with --with-tclinclude" >&2;}
{ (exit 1); exit 1; }; }
else
- { echo "$as_me:$LINENO: result: ${ac_cv_c_tclh}" >&5
-echo "${ECHO_T}${ac_cv_c_tclh}" >&6; }
+ echo "$as_me:$LINENO: result: ${ac_cv_c_tclh}" >&5
+echo "${ECHO_T}${ac_cv_c_tclh}" >&6
fi
# Convert to a native path and substitute into the output files.
@@ -9109,8 +10278,8 @@
# Look for a real versioned tclsh first
# Extract the first word of "tclsh${TCL_VERSION} tclsh", so it can be a program name with args.
set dummy tclsh${TCL_VERSION} tclsh; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_TCLSH+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -9125,35 +10294,34 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_TCLSH="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
TCLSH=$ac_cv_path_TCLSH
+
if test -n "$TCLSH"; then
- { echo "$as_me:$LINENO: result: $TCLSH" >&5
-echo "${ECHO_T}$TCLSH" >&6; }
+ echo "$as_me:$LINENO: result: $TCLSH" >&5
+echo "${ECHO_T}$TCLSH" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
;;
*)
# Otherwise, look for a non-versioned tclsh
# Extract the first word of "tclsh tclsh${TCL_VERSION}", so it can be a program name with args.
set dummy tclsh tclsh${TCL_VERSION}; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_TCLSH+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -9168,28 +10336,27 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_TCLSH="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
TCLSH=$ac_cv_path_TCLSH
+
if test -n "$TCLSH"; then
- { echo "$as_me:$LINENO: result: $TCLSH" >&5
-echo "${ECHO_T}$TCLSH" >&6; }
+ echo "$as_me:$LINENO: result: $TCLSH" >&5
+echo "${ECHO_T}$TCLSH" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
;;
esac
if test "x$TCLSH" = "x" ; then
@@ -9203,16 +10370,16 @@
# Check for Tcl package path
- { echo "$as_me:$LINENO: checking for Tcl package directory" >&5
-echo $ECHO_N "checking for Tcl package directory... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for Tcl package directory" >&5
+echo $ECHO_N "checking for Tcl package directory... $ECHO_C" >&6
-# Check whether --with-tclpackage was given.
+# Check whether --with-tclpackage or --without-tclpackage was given.
if test "${with_tclpackage+set}" = set; then
- withval=$with_tclpackage; with_tclpackagedir=${withval}
-fi
+ withval="$with_tclpackage"
+ with_tclpackagedir=${withval}
+fi;
-
if test x"${with_tclpackagedir}" != x ; then
ac_cv_c_tclpkgd=${with_tclpackagedir}
else
@@ -9263,8 +10430,8 @@
echo "$as_me: error: Tcl package directory not found. Please specify its location with --with-tclpackage" >&2;}
{ (exit 1); exit 1; }; }
else
- { echo "$as_me:$LINENO: result: ${ac_cv_c_tclpkgd}" >&5
-echo "${ECHO_T}${ac_cv_c_tclpkgd}" >&6; }
+ echo "$as_me:$LINENO: result: ${ac_cv_c_tclpkgd}" >&5
+echo "${ECHO_T}${ac_cv_c_tclpkgd}" >&6
fi
# Convert to a native path and substitute into the output files.
@@ -9278,15 +10445,15 @@
# Check if thread is enabled.
- { echo "$as_me:$LINENO: checking whether tclsh was compiled with threads" >&5
-echo $ECHO_N "checking whether tclsh was compiled with threads... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking whether tclsh was compiled with threads" >&5
+echo $ECHO_N "checking whether tclsh was compiled with threads... $ECHO_C" >&6
tcl_threadenabled=`echo 'puts -nonewline [info exists tcl_platform(threaded)]' | $TCLSH`
if test "$tcl_threadenabled" = "1" ; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
{ { echo "$as_me:$LINENO: error: tcl wasn't compiled with threads enabled" >&5
echo "$as_me: error: tcl wasn't compiled with threads enabled" >&2;}
{ (exit 1); exit 1; }; }
@@ -9296,17 +10463,17 @@
## libcurl
-# Check whether --with-curlprefix was given.
+# Check whether --with-curlprefix or --without-curlprefix was given.
if test "${with_curlprefix+set}" = set; then
- withval=$with_curlprefix; curlprefix=$withval
-fi
+ withval="$with_curlprefix"
+ curlprefix=$withval
+fi;
-
if test "x$curlprefix" = "x"; then
# Extract the first word of "curl-config", so it can be a program name with args.
set dummy curl-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_CURL_CONFIG+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -9321,33 +10488,32 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_CURL_CONFIG="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
CURL_CONFIG=$ac_cv_path_CURL_CONFIG
+
if test -n "$CURL_CONFIG"; then
- { echo "$as_me:$LINENO: result: $CURL_CONFIG" >&5
-echo "${ECHO_T}$CURL_CONFIG" >&6; }
+ echo "$as_me:$LINENO: result: $CURL_CONFIG" >&5
+echo "${ECHO_T}$CURL_CONFIG" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
else
# Extract the first word of "curl-config", so it can be a program name with args.
set dummy curl-config; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_CURL_CONFIG+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -9362,28 +10528,27 @@
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_CURL_CONFIG="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
-IFS=$as_save_IFS
;;
esac
fi
CURL_CONFIG=$ac_cv_path_CURL_CONFIG
+
if test -n "$CURL_CONFIG"; then
- { echo "$as_me:$LINENO: result: $CURL_CONFIG" >&5
-echo "${ECHO_T}$CURL_CONFIG" >&6; }
+ echo "$as_me:$LINENO: result: $CURL_CONFIG" >&5
+echo "${ECHO_T}$CURL_CONFIG" >&6
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
fi
if test "x$CURL_CONFIG" = "x"; then
@@ -9404,8 +10569,8 @@
# Do we have curl_easy_strerror?
-{ echo "$as_me:$LINENO: checking for curl_easy_strerror in -lcurl" >&5
-echo $ECHO_N "checking for curl_easy_strerror in -lcurl... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for curl_easy_strerror in -lcurl" >&5
+echo $ECHO_N "checking for curl_easy_strerror in -lcurl... $ECHO_C" >&6
if test "${ac_cv_lib_curl_curl_easy_strerror+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -9418,53 +10583,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char curl_easy_strerror ();
int
main ()
{
-return curl_easy_strerror ();
+curl_easy_strerror ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_curl_curl_easy_strerror=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_curl_curl_easy_strerror=no
+ac_cv_lib_curl_curl_easy_strerror=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_curl_curl_easy_strerror" >&5
-echo "${ECHO_T}$ac_cv_lib_curl_curl_easy_strerror" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_curl_curl_easy_strerror" >&5
+echo "${ECHO_T}$ac_cv_lib_curl_curl_easy_strerror" >&6
if test $ac_cv_lib_curl_curl_easy_strerror = yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_CURL_EASY_STRERROR 1
@@ -9478,26 +10646,26 @@
## Thread package.
-# Check whether --with-included-tclthread was given.
+# Check whether --with-included-tclthread or --without-included-tclthread was given.
if test "${with_included_tclthread+set}" = set; then
- withval=$with_included_tclthread; with_included_tclthread=$withval
+ withval="$with_included_tclthread"
+ with_included_tclthread=$withval
else
with_included_tclthread="unspecified"
-fi
+fi;
-
# Check if thread package is already installed.
if test "x$with_included_tclthread" = "xunspecified" ; then
- { echo "$as_me:$LINENO: checking for Tcl Thread package" >&5
-echo $ECHO_N "checking for Tcl Thread package... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for Tcl Thread package" >&5
+echo $ECHO_N "checking for Tcl Thread package... $ECHO_C" >&6
package_present=`echo 'if {[catch {package require Thread}]} {puts -nonewline 0} else {puts -nonewline 1}' | $TCLSH`
if test "$package_present" = "1"; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }; with_included_tclthread=no
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; with_included_tclthread=no
else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }; with_included_tclthread=yes
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; with_included_tclthread=yes
fi
@@ -9506,8 +10674,10 @@
# If thread package isn't installed, configure and install thread package.
if test "$with_included_tclthread" = "yes"; then
OUR_INCLUDED_PACKAGES="$OUR_INCLUDED_PACKAGES thread2.6"
- subdirs="$subdirs src/thread2.6"
+
+subdirs="$subdirs src/thread2.6"
+
# Extract thread package
(cd src/; gzip -d < thread2.6.tar.gz | tar xf -)
# Patch thread package (so thread2.6 is the vanilla distribution directory)
@@ -9516,18 +10686,18 @@
## sqlite3 package.
-# Check whether --with-included-sqlite3 was given.
+# Check whether --with-included-sqlite3 or --without-included-sqlite3 was given.
if test "${with_included_sqlite3+set}" = set; then
- withval=$with_included_sqlite3; with_included_sqlite3=$withval
+ withval="$with_included_sqlite3"
+ with_included_sqlite3=$withval
else
with_included_sqlite3="unspecified"
-fi
+fi;
-
# Check if sqlite3 package is already installed.
if test "x$with_included_sqlite3" = "xunspecified" ; then
- { echo "$as_me:$LINENO: checking for sqlite3_open in -lsqlite3" >&5
-echo $ECHO_N "checking for sqlite3_open in -lsqlite3... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for sqlite3_open in -lsqlite3" >&5
+echo $ECHO_N "checking for sqlite3_open in -lsqlite3... $ECHO_C" >&6
if test "${ac_cv_lib_sqlite3_sqlite3_open+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -9540,53 +10710,56 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
+/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char sqlite3_open ();
int
main ()
{
-return sqlite3_open ();
+sqlite3_open ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext &&
- $as_test_x conftest$ac_exeext; then
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_lib_sqlite3_sqlite3_open=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_lib_sqlite3_sqlite3_open=no
+ac_cv_lib_sqlite3_sqlite3_open=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_sqlite3_sqlite3_open" >&5
-echo "${ECHO_T}$ac_cv_lib_sqlite3_sqlite3_open" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_lib_sqlite3_sqlite3_open" >&5
+echo "${ECHO_T}$ac_cv_lib_sqlite3_sqlite3_open" >&6
if test $ac_cv_lib_sqlite3_sqlite3_open = yes; then
with_included_sqlite3=no
else
@@ -9596,19 +10769,21 @@
fi
-# Check whether --with-tcl-sqlite3 was given.
+# Check whether --with-tcl-sqlite3 or --without-tcl-sqlite3 was given.
if test "${with_tcl_sqlite3+set}" = set; then
- withval=$with_tcl_sqlite3; od_sqlite3_dir=$withval
+ withval="$with_tcl_sqlite3"
+ od_sqlite3_dir=$withval
else
od_sqlite3_dir=/usr/lib/sqlite3
-fi
+fi;
-
# If sqlite3 package isn't installed, configure and install sqlite3 package.
if test "$with_included_sqlite3" = "yes"; then
OUR_INCLUDED_PACKAGES="$OUR_INCLUDED_PACKAGES sqlite-3.1.3"
- subdirs="$subdirs src/sqlite-3.1.3"
+
+subdirs="$subdirs src/sqlite-3.1.3"
+
# Extract sqlite3 package
(cd src/; gzip -d < sqlite-3.1.3.tar.gz | tar xf -)
# patch sqlite3 with desired configure options
@@ -9624,8 +10799,8 @@
else
SQLITE3_LIBS="-lsqlite3"
- { echo "$as_me:$LINENO: checking for Tcl sqlite3 location" >&5
-echo $ECHO_N "checking for Tcl sqlite3 location... $ECHO_C" >&6; }
+ echo "$as_me:$LINENO: checking for Tcl sqlite3 location" >&5
+echo $ECHO_N "checking for Tcl sqlite3 location... $ECHO_C" >&6
if test "${od_cv_sqlite3_dir+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
@@ -9633,8 +10808,8 @@
test -r "${od_sqlite3_dir}/pkgIndex.tcl" && od_cv_sqlite3_dir=$od_sqlite3_dir
fi
-{ echo "$as_me:$LINENO: result: $od_cv_sqlite3_dir" >&5
-echo "${ECHO_T}$od_cv_sqlite3_dir" >&6; }
+echo "$as_me:$LINENO: result: $od_cv_sqlite3_dir" >&5
+echo "${ECHO_T}$od_cv_sqlite3_dir" >&6
SQLITE3_DIR=$od_cv_sqlite3_dir
fi
@@ -9646,16 +10821,16 @@
# Allows building of shared libraries
- { echo "$as_me:$LINENO: checking how to build libraries" >&5
-echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6; }
- # Check whether --enable-shared was given.
+ echo "$as_me:$LINENO: checking how to build libraries" >&5
+echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6
+ # Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
- enableval=$enable_shared; tcl_ok=$enableval
+ enableval="$enable_shared"
+ tcl_ok=$enableval
else
tcl_ok=yes
-fi
+fi;
-
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
tcl_ok=$enableval
@@ -9664,12 +10839,12 @@
fi
if test "$tcl_ok" = "yes" ; then
- { echo "$as_me:$LINENO: result: shared" >&5
-echo "${ECHO_T}shared" >&6; }
+ echo "$as_me:$LINENO: result: shared" >&5
+echo "${ECHO_T}shared" >&6
SHARED_BUILD=1
else
- { echo "$as_me:$LINENO: result: static" >&5
-echo "${ECHO_T}static" >&6; }
+ echo "$as_me:$LINENO: result: static" >&5
+echo "${ECHO_T}static" >&6
SHARED_BUILD=0
cat >>confdefs.h <<\_ACEOF
@@ -9723,7 +10898,7 @@
# Output
-ac_config_files="$ac_config_files Makefile Mk/dports.autoconf.mk doc/prefix.mtree doc/macosx.mtree doc/ports.conf src/Makefile src/darwinports1.0/darwinports_autoconf.tcl src/port1.0/port_autoconf.tcl src/registry1.0/registry_autoconf.tcl src/programs/Makefile src/darwinports1.0/darwinports_fastload.tcl"
+ ac_config_files="$ac_config_files Makefile Mk/dports.autoconf.mk doc/prefix.mtree doc/macosx.mtree doc/ports.conf src/Makefile src/darwinports1.0/darwinports_autoconf.tcl src/port1.0/port_autoconf.tcl src/registry1.0/registry_autoconf.tcl src/programs/Makefile src/darwinports1.0/darwinports_fastload.tcl"
cat >confcache <<\_ACEOF
@@ -9744,58 +10919,39 @@
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
+# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
-
+{
(set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
+ ;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
;;
- esac |
- sort
-) |
+ esac;
+} |
sed '
- /^ac_cv_env_/b end
t clear
- :clear
+ : clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
cat confcache >$cache_file
else
- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
@@ -9804,18 +10960,32 @@
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
DEFS=-DHAVE_CONFIG_H
ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
@@ -9846,46 +11016,18 @@
## M4sh Initialization. ##
## --------------------- ##
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
+# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
fi
+DUALCASE=1; export DUALCASE # for MKS sh
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
@@ -9894,43 +11036,8 @@
fi
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
+$as_unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '
@@ -9944,19 +11051,18 @@
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ $as_unset $as_var
fi
done
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
as_expr=expr
else
as_expr=false
fi
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
@@ -9964,120 +11070,159 @@
# Name of the executable.
-as_me=`$as_basename -- "$0" ||
+as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
-# CDPATH.
-$as_unset CDPATH
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
as_lineno_1=$LINENO
as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
t loop
- s/-\n.*//
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
# Exit status is that of the last command.
exit
}
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
+rm -f conf$$ conf$$.exe conf$$.file
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
@@ -10086,28 +11231,7 @@
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -10116,14 +11240,31 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
exec 6>&1
-# Save the log message, to keep $[0] and so on meaningful, and to
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
This file was extended by MacPorts $as_me 1.5, which was
-generated by GNU Autoconf 2.61. Invocation command line was
+generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -10131,19 +11272,30 @@
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
-_ACEOF
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
cat >>$CONFIG_STATUS <<\_ACEOF
+
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
@@ -10151,7 +11303,7 @@
Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
+ -V, --version print version number, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
@@ -10167,21 +11319,19 @@
$config_headers
Report bugs to <bug-autoconf at gnu.org>."
+_ACEOF
-_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
MacPorts config.status 1.5
-configured by $0, generated by GNU Autoconf 2.61,
- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2003 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
+srcdir=$srcdir
+INSTALL="$INSTALL"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -10192,24 +11342,39 @@
do
case $1 in
--*=*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
ac_shift=:
;;
- *)
+ -*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
esac
case $ac_option in
# Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
@@ -10219,24 +11384,18 @@
$ac_shift
CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- { echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
- -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
{ (exit 1); exit 1; }; } ;;
- *) ac_config_targets="$ac_config_targets $1"
- ac_need_defaults=false ;;
+ *) ac_config_targets="$ac_config_targets $1" ;;
esac
shift
@@ -10252,54 +11411,40 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- CONFIG_SHELL=$SHELL
- export CONFIG_SHELL
- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- echo "$ac_log"
-} >&5
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-_ACEOF
+
+
+
cat >>$CONFIG_STATUS <<\_ACEOF
-
-# Handling of arguments.
for ac_config_target in $ac_config_targets
do
- case $ac_config_target in
- "src/config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
- "src/programs/daemondo/Makefile") CONFIG_FILES="$CONFIG_FILES src/programs/daemondo/Makefile" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "Mk/dports.autoconf.mk") CONFIG_FILES="$CONFIG_FILES Mk/dports.autoconf.mk" ;;
- "doc/prefix.mtree") CONFIG_FILES="$CONFIG_FILES doc/prefix.mtree" ;;
- "doc/macosx.mtree") CONFIG_FILES="$CONFIG_FILES doc/macosx.mtree" ;;
- "doc/ports.conf") CONFIG_FILES="$CONFIG_FILES doc/ports.conf" ;;
- "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
- "src/darwinports1.0/darwinports_autoconf.tcl") CONFIG_FILES="$CONFIG_FILES src/darwinports1.0/darwinports_autoconf.tcl" ;;
- "src/port1.0/port_autoconf.tcl") CONFIG_FILES="$CONFIG_FILES src/port1.0/port_autoconf.tcl" ;;
- "src/registry1.0/registry_autoconf.tcl") CONFIG_FILES="$CONFIG_FILES src/registry1.0/registry_autoconf.tcl" ;;
- "src/programs/Makefile") CONFIG_FILES="$CONFIG_FILES src/programs/Makefile" ;;
- "src/darwinports1.0/darwinports_fastload.tcl") CONFIG_FILES="$CONFIG_FILES src/darwinports1.0/darwinports_fastload.tcl" ;;
-
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "src/programs/daemondo/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/programs/daemondo/Makefile" ;;
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "Mk/dports.autoconf.mk" ) CONFIG_FILES="$CONFIG_FILES Mk/dports.autoconf.mk" ;;
+ "doc/prefix.mtree" ) CONFIG_FILES="$CONFIG_FILES doc/prefix.mtree" ;;
+ "doc/macosx.mtree" ) CONFIG_FILES="$CONFIG_FILES doc/macosx.mtree" ;;
+ "doc/ports.conf" ) CONFIG_FILES="$CONFIG_FILES doc/ports.conf" ;;
+ "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "src/darwinports1.0/darwinports_autoconf.tcl" ) CONFIG_FILES="$CONFIG_FILES src/darwinports1.0/darwinports_autoconf.tcl" ;;
+ "src/port1.0/port_autoconf.tcl" ) CONFIG_FILES="$CONFIG_FILES src/port1.0/port_autoconf.tcl" ;;
+ "src/registry1.0/registry_autoconf.tcl" ) CONFIG_FILES="$CONFIG_FILES src/registry1.0/registry_autoconf.tcl" ;;
+ "src/programs/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/programs/Makefile" ;;
+ "src/darwinports1.0/darwinports_fastload.tcl" ) CONFIG_FILES="$CONFIG_FILES src/darwinports1.0/darwinports_fastload.tcl" ;;
+ "src/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
-
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
@@ -10310,624 +11455,639 @@
fi
# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
+# simply because there is no reason to put it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
+# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
- tmp=
- trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
+
# Create a (secure) tmp directory for tmp files.
{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
} ||
{
echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
#
-# Set up the sed scripts for CONFIG_FILES section.
+# CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s, at SHELL@,$SHELL,;t t
+s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s, at exec_prefix@,$exec_prefix,;t t
+s, at prefix@,$prefix,;t t
+s, at program_transform_name@,$program_transform_name,;t t
+s, at bindir@,$bindir,;t t
+s, at sbindir@,$sbindir,;t t
+s, at libexecdir@,$libexecdir,;t t
+s, at datadir@,$datadir,;t t
+s, at sysconfdir@,$sysconfdir,;t t
+s, at sharedstatedir@,$sharedstatedir,;t t
+s, at localstatedir@,$localstatedir,;t t
+s, at libdir@,$libdir,;t t
+s, at includedir@,$includedir,;t t
+s, at oldincludedir@,$oldincludedir,;t t
+s, at infodir@,$infodir,;t t
+s, at mandir@,$mandir,;t t
+s, at build_alias@,$build_alias,;t t
+s, at host_alias@,$host_alias,;t t
+s, at target_alias@,$target_alias,;t t
+s, at DEFS@,$DEFS,;t t
+s, at ECHO_C@,$ECHO_C,;t t
+s, at ECHO_N@,$ECHO_N,;t t
+s, at ECHO_T@,$ECHO_T,;t t
+s, at LIBS@,$LIBS,;t t
+s, at build@,$build,;t t
+s, at build_cpu@,$build_cpu,;t t
+s, at build_vendor@,$build_vendor,;t t
+s, at build_os@,$build_os,;t t
+s, at host@,$host,;t t
+s, at host_cpu@,$host_cpu,;t t
+s, at host_vendor@,$host_vendor,;t t
+s, at host_os@,$host_os,;t t
+s, at target@,$target,;t t
+s, at target_cpu@,$target_cpu,;t t
+s, at target_vendor@,$target_vendor,;t t
+s, at target_os@,$target_os,;t t
+s, at CC@,$CC,;t t
+s, at CFLAGS@,$CFLAGS,;t t
+s, at LDFLAGS@,$LDFLAGS,;t t
+s, at CPPFLAGS@,$CPPFLAGS,;t t
+s, at ac_ct_CC@,$ac_ct_CC,;t t
+s, at EXEEXT@,$EXEEXT,;t t
+s, at OBJEXT@,$OBJEXT,;t t
+s, at OBJC@,$OBJC,;t t
+s, at OBJCFLAGS@,$OBJCFLAGS,;t t
+s, at ac_ct_OBJC@,$ac_ct_OBJC,;t t
+s, at INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s, at INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s, at INSTALL_DATA@,$INSTALL_DATA,;t t
+s, at SET_MAKE@,$SET_MAKE,;t t
+s, at LN_S@,$LN_S,;t t
+s, at MTREE@,$MTREE,;t t
+s, at CVS@,$CVS,;t t
+s, at SVN@,$SVN,;t t
+s, at RSYNC@,$RSYNC,;t t
+s, at HAVE_LAUNCHD@,$HAVE_LAUNCHD,;t t
+s, at LAUNCHCTL@,$LAUNCHCTL,;t t
+s, at XCODEBUILD@,$XCODEBUILD,;t t
+s, at BZIP2@,$BZIP2,;t t
+s, at XAR@,$XAR,;t t
+s, at OPEN@,$OPEN,;t t
+s, at TAR@,$TAR,;t t
+s, at GNUTAR@,$GNUTAR,;t t
+s, at TAR_CMD@,$TAR_CMD,;t t
+s, at CFLAGS_QUICHEEATERS@,$CFLAGS_QUICHEEATERS,;t t
+s, at CFLAGS_WERROR@,$CFLAGS_WERROR,;t t
+s, at OBJCPP@,$OBJCPP,;t t
+s, at EGREP@,$EGREP,;t t
+s, at OBJC_RUNTIME@,$OBJC_RUNTIME,;t t
+s, at OBJC_RUNTIME_FLAGS@,$OBJC_RUNTIME_FLAGS,;t t
+s, at OBJC_LIBS@,$OBJC_LIBS,;t t
+s, at OBJC_PTHREAD_LIBS@,$OBJC_PTHREAD_LIBS,;t t
+s, at OBJC_PTHREAD_CFLAGS@,$OBJC_PTHREAD_CFLAGS,;t t
+s, at HAVE_FRAMEWORK_COREFOUNDATION@,$HAVE_FRAMEWORK_COREFOUNDATION,;t t
+s, at HAVE_FRAMEWORK_SYSTEMCONFIGURATION@,$HAVE_FRAMEWORK_SYSTEMCONFIGURATION,;t t
+s, at HAVE_FRAMEWORK_IOKIT@,$HAVE_FRAMEWORK_IOKIT,;t t
+s, at HAVE_FUNCTION_CFNOTIFICATIONCENTERGETDARWINNOTIFYCENTER@,$HAVE_FUNCTION_CFNOTIFICATIONCENTERGETDARWINNOTIFYCENTER,;t t
+s, at REPLACEMENT_PROGS@,$REPLACEMENT_PROGS,;t t
+s, at EXTRA_PROGS@,$EXTRA_PROGS,;t t
+s, at DPORTSDIR@,$DPORTSDIR,;t t
+s, at PORTCONFIGDIR@,$PORTCONFIGDIR,;t t
+s, at DSTUSR@,$DSTUSR,;t t
+s, at DSTGRP@,$DSTGRP,;t t
+s, at DSTMODE@,$DSTMODE,;t t
+s, at CPP@,$CPP,;t t
+s, at READLINK_IS_NOT_P1003_1A@,$READLINK_IS_NOT_P1003_1A,;t t
+s, at MD5_LIBS@,$MD5_LIBS,;t t
+s, at X_CFLAGS@,$X_CFLAGS,;t t
+s, at X_PRE_LIBS@,$X_PRE_LIBS,;t t
+s, at X_LIBS@,$X_LIBS,;t t
+s, at X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t
+s, at TCL_VERSION@,$TCL_VERSION,;t t
+s, at TCL_BIN_DIR@,$TCL_BIN_DIR,;t t
+s, at TCL_SRC_DIR@,$TCL_SRC_DIR,;t t
+s, at TCL_LIB_FILE@,$TCL_LIB_FILE,;t t
+s, at TCL_LIB_FLAG@,$TCL_LIB_FLAG,;t t
+s, at TCL_LIB_SPEC@,$TCL_LIB_SPEC,;t t
+s, at TCL_STUB_LIB_FILE@,$TCL_STUB_LIB_FILE,;t t
+s, at TCL_STUB_LIB_FLAG@,$TCL_STUB_LIB_FLAG,;t t
+s, at TCL_STUB_LIB_SPEC@,$TCL_STUB_LIB_SPEC,;t t
+s, at TCL_INCLUDES@,$TCL_INCLUDES,;t t
+s, at TCLSH@,$TCLSH,;t t
+s, at TCL_PACKAGE_DIR@,$TCL_PACKAGE_DIR,;t t
+s, at CURL_CONFIG@,$CURL_CONFIG,;t t
+s, at CFLAGS_LIBCURL@,$CFLAGS_LIBCURL,;t t
+s, at LDFLAGS_LIBCURL@,$LDFLAGS_LIBCURL,;t t
+s, at subdirs@,$subdirs,;t t
+s, at SQLITE3_LIBS@,$SQLITE3_LIBS,;t t
+s, at SQLITE3_DIR@,$SQLITE3_DIR,;t t
+s, at OUR_INCLUDED_PACKAGES@,$OUR_INCLUDED_PACKAGES,;t t
+s, at INCLUDES@,$INCLUDES,;t t
+s, at CFLAGS_DEBUG@,$CFLAGS_DEBUG,;t t
+s, at CFLAGS_OPTIMIZE@,$CFLAGS_OPTIMIZE,;t t
+s, at TCL_DEFS@,$TCL_DEFS,;t t
+s, at STLIB_LD@,$STLIB_LD,;t t
+s, at SHLIB_LD@,$SHLIB_LD,;t t
+s, at SHLIB_CFLAGS@,$SHLIB_CFLAGS,;t t
+s, at SHLIB_LDFLAGS@,$SHLIB_LDFLAGS,;t t
+s, at SHLIB_SUFFIX@,$SHLIB_SUFFIX,;t t
+s, at TCL_CC@,$TCL_CC,;t t
+s, at prefix_expanded@,$prefix_expanded,;t t
+s, at PORTCONFIGDIR_EXPANDED@,$PORTCONFIGDIR_EXPANDED,;t t
+s, at localstatedir_expanded@,$localstatedir_expanded,;t t
+s, at LIBOBJS@,$LIBOBJS,;t t
+s, at LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
_ACEOF
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-target!$target$ac_delim
-target_cpu!$target_cpu$ac_delim
-target_vendor!$target_vendor$ac_delim
-target_os!$target_os$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-LN_S!$LN_S$ac_delim
-MTREE!$MTREE$ac_delim
-CVS!$CVS$ac_delim
-SVN!$SVN$ac_delim
-RSYNC!$RSYNC$ac_delim
-HAVE_LAUNCHD!$HAVE_LAUNCHD$ac_delim
-LAUNCHCTL!$LAUNCHCTL$ac_delim
-XCODEBUILD!$XCODEBUILD$ac_delim
-BZIP2!$BZIP2$ac_delim
-XAR!$XAR$ac_delim
-OPEN!$OPEN$ac_delim
-TAR!$TAR$ac_delim
-GNUTAR!$GNUTAR$ac_delim
-TAR_CMD!$TAR_CMD$ac_delim
-CFLAGS_QUICHEEATERS!$CFLAGS_QUICHEEATERS$ac_delim
-HAVE_FRAMEWORK_COREFOUNDATION!$HAVE_FRAMEWORK_COREFOUNDATION$ac_delim
-HAVE_FRAMEWORK_SYSTEMCONFIGURATION!$HAVE_FRAMEWORK_SYSTEMCONFIGURATION$ac_delim
-HAVE_FRAMEWORK_IOKIT!$HAVE_FRAMEWORK_IOKIT$ac_delim
-HAVE_FUNCTION_CFNOTIFICATIONCENTERGETDARWINNOTIFYCENTER!$HAVE_FUNCTION_CFNOTIFICATIONCENTERGETDARWINNOTIFYCENTER$ac_delim
-REPLACEMENT_PROGS!$REPLACEMENT_PROGS$ac_delim
-EXTRA_PROGS!$EXTRA_PROGS$ac_delim
-DPORTSDIR!$DPORTSDIR$ac_delim
-PORTCONFIGDIR!$PORTCONFIGDIR$ac_delim
-DSTUSR!$DSTUSR$ac_delim
-DSTGRP!$DSTGRP$ac_delim
-DSTMODE!$DSTMODE$ac_delim
-CPP!$CPP$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-READLINK_IS_NOT_P1003_1A!$READLINK_IS_NOT_P1003_1A$ac_delim
-MD5_LIBS!$MD5_LIBS$ac_delim
-XMKMF!$XMKMF$ac_delim
-X_CFLAGS!$X_CFLAGS$ac_delim
-X_PRE_LIBS!$X_PRE_LIBS$ac_delim
-X_LIBS!$X_LIBS$ac_delim
-X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim
-TCL_VERSION!$TCL_VERSION$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
fi
-done
+fi # test -n "$CONFIG_FILES"
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
-_ACEOF
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-TCL_BIN_DIR!$TCL_BIN_DIR$ac_delim
-TCL_SRC_DIR!$TCL_SRC_DIR$ac_delim
-TCL_LIB_FILE!$TCL_LIB_FILE$ac_delim
-TCL_LIB_FLAG!$TCL_LIB_FLAG$ac_delim
-TCL_LIB_SPEC!$TCL_LIB_SPEC$ac_delim
-TCL_STUB_LIB_FILE!$TCL_STUB_LIB_FILE$ac_delim
-TCL_STUB_LIB_FLAG!$TCL_STUB_LIB_FLAG$ac_delim
-TCL_STUB_LIB_SPEC!$TCL_STUB_LIB_SPEC$ac_delim
-TCL_INCLUDES!$TCL_INCLUDES$ac_delim
-TCLSH!$TCLSH$ac_delim
-TCL_PACKAGE_DIR!$TCL_PACKAGE_DIR$ac_delim
-CURL_CONFIG!$CURL_CONFIG$ac_delim
-CFLAGS_LIBCURL!$CFLAGS_LIBCURL$ac_delim
-LDFLAGS_LIBCURL!$LDFLAGS_LIBCURL$ac_delim
-subdirs!$subdirs$ac_delim
-SQLITE3_LIBS!$SQLITE3_LIBS$ac_delim
-SQLITE3_DIR!$SQLITE3_DIR$ac_delim
-OUR_INCLUDED_PACKAGES!$OUR_INCLUDED_PACKAGES$ac_delim
-INCLUDES!$INCLUDES$ac_delim
-CFLAGS_DEBUG!$CFLAGS_DEBUG$ac_delim
-CFLAGS_OPTIMIZE!$CFLAGS_OPTIMIZE$ac_delim
-TCL_DEFS!$TCL_DEFS$ac_delim
-STLIB_LD!$STLIB_LD$ac_delim
-SHLIB_LD!$SHLIB_LD$ac_delim
-SHLIB_CFLAGS!$SHLIB_CFLAGS$ac_delim
-SHLIB_LDFLAGS!$SHLIB_LDFLAGS$ac_delim
-SHLIB_SUFFIX!$SHLIB_SUFFIX$ac_delim
-TCL_CC!$TCL_CC$ac_delim
-prefix_expanded!$prefix_expanded$ac_delim
-PORTCONFIGDIR_EXPANDED!$PORTCONFIGDIR_EXPANDED$ac_delim
-localstatedir_expanded!$localstatedir_expanded$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 33; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
-_ACEOF
-
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
cat >>$CONFIG_STATUS <<\_ACEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- ac_file_inputs="$ac_file_inputs $ac_f"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input="Generated from "`IFS=:
- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- fi
-
- case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin";;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
+
ac_builddir=.
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
+if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
case $srcdir in
- .) # We are building in place.
+ .) # No --srcdir option. We are building in place.
ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
esac
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
-case `sed -n '/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+s, at configure_input@,$configure_input,;t t
+s, at srcdir@,$ac_srcdir,;t t
+s, at abs_srcdir@,$ac_abs_srcdir,;t t
+s, at top_srcdir@,$ac_top_srcdir,;t t
+s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s, at builddir@,$ac_builddir,;t t
+s, at abs_builddir@,$ac_abs_builddir,;t t
+s, at top_builddir@,$ac_top_builddir,;t t
+s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
+s, at INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
- rm -f "$tmp/stdin"
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='[ ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- -) cat "$tmp/out"; rm -f "$tmp/out";;
- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
esac
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
+
+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ # Do quote $f, to prevent DOS paths from being IFS'd.
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+ # Remove the trailing spaces.
+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
+
_ACEOF
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status. If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless. But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
-ac_dB='\\)[ (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h. The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status. Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless. Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
-uniq confdefs.h |
- sed -n '
- t rset
- :rset
- s/^[ ]*#[ ]*define[ ][ ]*//
- t ok
- d
- :ok
- s/[\\&,]/\\&/g
- s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
- s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
- ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments. This is necessary, for
+# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[ #]*u.*,/* & */,' >>conftest.defines
+cat >>conftest.undefs <<\_ACEOF
+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo ' :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
do
- # Write a here document:
- cat >>$CONFIG_STATUS <<_ACEOF
- # First, check the format of the line:
- cat >"\$tmp/defines.sed" <<\\CEOF
-/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
-/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
-b
-:def
-_ACEOF
- sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
+ # Write a limited-size here document to $tmp/defines.sed.
+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#define' lines.
+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
echo 'CEOF
- sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
- ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
- sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
- grep . conftest.tail >/dev/null || break
+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
rm -f conftest.defines
mv conftest.tail conftest.defines
done
-rm -f conftest.defines conftest.tail
+rm -f conftest.defines
+echo ' fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+ # Write a limited-size here document to $tmp/undefs.sed.
+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#undef'
+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+ rm -f conftest.undefs
+ mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
cat >>$CONFIG_STATUS <<\_ACEOF
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ echo "/* Generated by configure. */" >$tmp/config.h
+ else
+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
+ fi
+ cat $tmp/in >>$tmp/config.h
+ rm -f $tmp/in
if test x"$ac_file" != x-; then
- echo "/* $configure_input */" >"$tmp/config.h"
- cat "$ac_result" >>"$tmp/config.h"
- if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
{ echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
rm -f $ac_file
- mv "$tmp/config.h" $ac_file
+ mv $tmp/config.h $ac_file
fi
else
- echo "/* $configure_input */"
- cat "$ac_result"
+ cat $tmp/config.h
+ rm -f $tmp/config.h
fi
- rm -f "$tmp/out12"
- ;;
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
- esac
-
-done # for ac_tag
-
-
{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
@@ -10963,10 +12123,7 @@
# Remove --cache-file and --srcdir arguments so they do not pile up.
ac_sub_configure_args=
ac_prev=
- eval "set x $ac_configure_args"
- shift
- for ac_arg
- do
+ for ac_arg in $ac_configure_args; do
if test -n "$ac_prev"; then
ac_prev=
continue
@@ -10989,123 +12146,123 @@
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
;;
- *)
- case $ac_arg in
- *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;;
+ *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
esac
done
# Always prepend --prefix to ensure using the same prefix
# in subdir configurations.
- ac_arg="--prefix=$prefix"
- case $ac_arg in
- *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
+ ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args"
- # Pass --silent
- if test "$silent" = yes; then
- ac_sub_configure_args="--silent $ac_sub_configure_args"
- fi
-
ac_popdir=`pwd`
for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
- test -d "$srcdir/$ac_dir" || continue
+ test -d $srcdir/$ac_dir || continue
- ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
- echo "$as_me:$LINENO: $ac_msg" >&5
- echo "$ac_msg" >&6
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ { echo "$as_me:$LINENO: configuring in $ac_dir" >&5
+echo "$as_me: configuring in $ac_dir" >&6;}
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
+
ac_builddir=.
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
+if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
case $srcdir in
- .) # We are building in place.
+ .) # No --srcdir option. We are building in place.
ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
- cd "$ac_dir"
+ cd $ac_dir
+
# Check for guested configure; otherwise get Cygnus style configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- ac_sub_configure=$ac_srcdir/configure.gnu
- elif test -f "$ac_srcdir/configure"; then
- ac_sub_configure=$ac_srcdir/configure
- elif test -f "$ac_srcdir/configure.in"; then
- # This should be Cygnus configure.
- ac_sub_configure=$ac_aux_dir/configure
+ if test -f $ac_srcdir/configure.gnu; then
+ ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'"
+ elif test -f $ac_srcdir/configure; then
+ ac_sub_configure="$SHELL '$ac_srcdir/configure'"
+ elif test -f $ac_srcdir/configure.in; then
+ ac_sub_configure=$ac_configure
else
{ echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
@@ -11117,21 +12274,21 @@
# Make the cache file name correct relative to the subdirectory.
case $cache_file in
[\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
- *) # Relative name.
- ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
+ *) # Relative path.
+ ac_sub_cache_file=$ac_top_builddir$cache_file ;;
esac
- { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
+ { echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
+echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
# The eval makes quoting arguments work.
- eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
- --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
+ eval $ac_sub_configure $ac_sub_configure_args \
+ --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
{ { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
{ (exit 1); exit 1; }; }
fi
- cd "$ac_popdir"
+ cd $ac_popdir
done
fi
Modified: trunk/base/configure.ac
===================================================================
--- trunk/base/configure.ac 2007-06-13 21:08:52 UTC (rev 26134)
+++ trunk/base/configure.ac 2007-06-13 23:52:22 UTC (rev 26135)
@@ -10,6 +10,7 @@
# Checks for programs.
AC_PROG_CC
+AC_PROG_OBJC
AC_PROG_INSTALL
AC_PROG_MAKE_SET
AC_PROG_LN_S
@@ -42,9 +43,15 @@
CFLAGS_QUICHEEATERS='-W -Wall -pedantic'
fi
AC_SUBST(CFLAGS_QUICHEEATERS)
+MP_WERROR
OD_COMPILER_ATTRIBUTE_UNUSED
+MP_COMPILER_ATTRIBUTE_LF_PRIVATE
+# Foundation checks
+MP_OBJC_RUNTIME
+MP_OBJC_FOUNDATION
+
OD_PROG_DAEMONDO
#OD_PROG_XAR
Added: trunk/base/foundation.m4
===================================================================
--- trunk/base/foundation.m4 (rev 0)
+++ trunk/base/foundation.m4 2007-06-13 23:52:22 UTC (rev 26135)
@@ -0,0 +1,408 @@
+#------------------------------------------------------------------------
+# MP_COMPILER_ATTRIBUTE_LF_PRIVATE
+#
+# Determines whether the compiler supports the symbol
+# 'visibility("hidden")' attribute
+#
+# Arguments:
+# None.
+#
+# Requires:
+# none
+#
+# Depends:
+# none
+#
+# Results:
+#
+# Defines the following macros:
+# LF_PRIVATE
+#
+#------------------------------------------------------------------------
+
+AC_DEFUN([MP_COMPILER_ATTRIBUTE_LF_PRIVATE], [
+ AC_MSG_CHECKING([for gcc symbol visibility attribute])
+ AC_CACHE_VAL(mp_cv_attribute_mp_private, [
+ AC_COMPILE_IFELSE([
+ AC_LANG_SOURCE([
+ #if defined(__GNUC__) && defined(__APPLE__) && __GNUC__ < 4
+ # error Darwin does not support the visibility attribute with gcc releases prior to 4
+ #elif defined(WIN32) && __GNUC__ < 4
+ # error MinGW/Cygwin do not support the visibility attribute with gcc releases prior to 4.
+ #endif
+ int a __attribute__ ((visibility("hidden")));
+ ])
+ ],[
+ mp_cv_attribute_mp_private="__attribute__((visibility(\"hidden\")))"
+ ],[
+ mp_cv_attribute_mp_private="no"
+ ])
+ ])
+
+ AC_MSG_RESULT([$mp_cv_attribute_mp_private])
+
+ if test x"$mp_cv_attribute_mp_private" = "xno"; then
+ MP_PRIVATE=""
+ else
+ MP_PRIVATE="$mp_cv_attribute_mp_private"
+ fi
+
+ AC_DEFINE_UNQUOTED(MP_PRIVATE, $MP_PRIVATE, [Mark private symbols])
+])
+
+
+#------------------------------------------------------------------------
+# MP_OBJC_RUNTIME --
+#
+# Determine the default, working Objective C runtime
+#
+# Arguments:
+# None.
+#
+# Requires:
+# none
+#
+# Depends:
+# AC_PROG_OBJC from objc.m4
+#
+# Results:
+#
+# Adds a --with-objc-runtime switch to configure.
+# Result is cached.
+#
+# Defines one of the following preprocessor macros:
+# APPLE_RUNTIME GNU_RUNTIME
+#
+# Substitutes the following variables:
+# OBJC_RUNTIME OBJC_RUNTIME_FLAGS OBJC_LIBS
+# OBJC_PTHREAD_CFLAGS OBJC_PTHREAD_LIBS
+#------------------------------------------------------------------------
+AC_DEFUN([MP_OBJC_RUNTIME],[
+ AC_REQUIRE([AC_PROG_OBJC])
+ AC_ARG_WITH(objc-runtime, AC_HELP_STRING([--with-objc-runtime], [Specify either "GNU" or "apple"]), [with_objc_runtime=${withval}])
+
+ if test x"${with_objc_runtime}" != x; then
+ case "${with_objc_runtime}" in
+ GNU)
+ ;;
+ apple)
+ ;;
+ *)
+ AC_MSG_ERROR([${with_objc_runtime} is not a valid argument to --with-objc-runtime. Please specify either "GNU" or "apple"])
+ ;;
+ esac
+ fi
+
+ AC_LANG_PUSH([Objective C])
+
+ # Check for common header, objc/objc.h
+ AC_CHECK_HEADERS([objc/objc.h], ,[AC_MSG_ERROR([Can't locate Objective C runtime headers])])
+
+ # Save LIBS & OBJCFLAGS
+ # depending on whether the cache is used,
+ # the variables may or may not be modified.
+ OLD_LIBS="${LIBS}"
+ OLD_OBJCFLAGS="${OBJCFLAGS}"
+
+ # Add -lobjc. The following tests will ensure that the library exists and functions with the detected Objective C compiler
+ LIBS="${LIBS} -lobjc"
+
+ # Test if pthreads are required to link against
+ # libobjc - this is the case on FreeBSD.
+
+ AC_MSG_CHECKING([if linking libobjc requires pthreads])
+ AC_CACHE_VAL(od_cv_objc_req_pthread, [
+ # First, test if objc links without pthreads
+ # The following uses quadrigraphs
+ # '@<:@' = '['
+ # '@:>@' = ']'
+ AC_LINK_IFELSE([
+ AC_LANG_PROGRAM([
+ #include <objc/objc.h>
+ #include <objc/Object.h>
+ ], [
+ Object *obj = @<:@Object alloc@:>@;
+ puts(@<:@obj name@:>@);
+ ])
+ ], [
+ # Linked without -pthread
+ od_cv_objc_req_pthread="no"
+ ], [
+ # Failed to link without -pthread
+ od_cv_objc_req_pthread="yes"
+ ]
+ )
+
+ # If the above failed, try with pthreads
+ if test x"${od_cv_objc_req_pthread}" = x"yes"; then
+ LIBS="${LIBS} ${PTHREAD_LIBS}"
+ OBJCFLAGS="${OBJCFLAGS} ${PTHREAD_CFLAGS}"
+ AC_LINK_IFELSE([
+ AC_LANG_PROGRAM([
+ #include <objc/objc.h>
+ #include <objc/Object.h>
+ ], [
+ Object *obj = @<:@Object alloc@:>@;
+ puts(@<:@obj name@:>@);
+ ])
+ ], [
+ # Linked with -lpthread
+ od_cv_objc_req_pthread="yes"
+ ], [
+ # Failed to link against objc at all
+ # This will be caught in the runtime
+ # checks below
+ od_cv_objc_req_pthread="no"
+ ]
+ )
+ fi
+ ])
+ AC_MSG_RESULT(${od_cv_objc_req_pthread})
+
+ if test x"${od_cv_objc_req_pthread}" = x"no"; then
+ OBJC_LIBS="-lobjc"
+ OBJC_PTHREAD_LIBS="${PTHREAD_LIBS}"
+ OBJC_PTHREAD_CFLAGS="${PTHREAD_CFLAGS}"
+ elif test x"${od_cv_objc_req_pthread}" = x"yes"; then
+ OBJC_LIBS="-lobjc ${PTHREAD_LIBS}"
+ OBJCFLAGS="${OBJCFLAGS} ${PTHREAD_CFLAGS}"
+ fi
+
+ if test x"${with_objc_runtime}" = x || test x"${with_objc_runtime}" = x"apple"; then
+ AC_MSG_CHECKING([for Apple Objective-C runtime])
+ AC_CACHE_VAL(od_cv_objc_runtime_apple, [
+ # The following uses quadrigraphs
+ # '@<:@' = '['
+ # '@:>@' = ']'
+ AC_LINK_IFELSE([
+ AC_LANG_PROGRAM([
+ #include <objc/objc.h>
+ #include <objc/objc-api.h>
+ ], [
+ id class = objc_lookUpClass("Object");
+ id obj = @<:@class alloc@:>@;
+ puts(@<:@obj name@:>@);
+ ])
+ ], [
+ od_cv_objc_runtime_apple="yes"
+ ], [
+ od_cv_objc_runtime_apple="no"
+ ]
+ )
+ ])
+ AC_MSG_RESULT(${od_cv_objc_runtime_apple})
+ else
+ od_cv_objc_runtime_apple="no"
+ fi
+
+ if test x"${with_objc_runtime}" = x || test x"${with_objc_runtime}" = x"GNU"; then
+ AC_MSG_CHECKING([for GNU Objective C runtime])
+ AC_CACHE_VAL(od_cv_objc_runtime_gnu, [
+ # The following uses quadrigraphs
+ # '@<:@' = '['
+ # '@:>@' = ']'
+ AC_LINK_IFELSE([
+ AC_LANG_PROGRAM([
+ #include <objc/objc.h>
+ #include <objc/objc-api.h>
+ ], [
+ id class = objc_lookup_class("Object");
+ id obj = @<:@class alloc@:>@;
+ puts(@<:@obj name@:>@);
+ ])
+ ], [
+ od_cv_objc_runtime_gnu="yes"
+ ], [
+ od_cv_objc_runtime_gnu="no"
+ ]
+ )
+ ])
+ AC_MSG_RESULT(${od_cv_objc_runtime_gnu})
+ else
+ od_cv_objc_runtime_gnu="no"
+ fi
+
+ # Apple runtime is prefered
+ if test x"${od_cv_objc_runtime_apple}" = x"yes"; then
+ OBJC_RUNTIME="APPLE_RUNTIME"
+ OBJC_RUNTIME_FLAGS="-fnext-runtime"
+ AC_MSG_NOTICE([Using Apple Objective-C runtime])
+ AC_DEFINE([APPLE_RUNTIME], 1, [Define if using the Apple Objective-C runtime and compiler.])
+ elif test x"${od_cv_objc_runtime_gnu}" = x"yes"; then
+ OBJC_RUNTIME="GNU_RUNTIME"
+ OBJC_RUNTIME_FLAGS="-fgnu-runtime"
+ AC_MSG_NOTICE([Using GNU Objective-C runtime])
+ AC_DEFINE([GNU_RUNTIME], 1, [Define if using the GNU Objective-C runtime and compiler.])
+ else
+ AC_MSG_FAILURE([Could not locate a working Objective-C runtime.])
+ fi
+
+ # Restore LIBS & OBJCFLAGS
+ LIBS="${OLD_LIBS}"
+ OBJCFLAGS="${OLD_OBJCFLAGS}"
+
+ AC_SUBST([OBJC_RUNTIME])
+ AC_SUBST([OBJC_RUNTIME_FLAGS])
+ AC_SUBST([OBJC_LIBS])
+
+ AC_SUBST([OBJC_PTHREAD_LIBS])
+ AC_SUBST([OBJC_PTHREAD_CFLAGS])
+
+ AC_LANG_POP([Objective C])
+])
+
+#------------------------------------------------------------------------
+# MP_OBJC_FOUNDATION --
+#
+# Find a functional Foundation implementation.
+# The NeXT Foundation implementation is prefered,
+# as it is most likely to be the system provided
+# Foundation.
+#
+# Arguments:
+# None.
+#
+# Requires:
+# OBJC_RUNTIME
+#
+# Depends:
+# AC_PROG_OBJC from objc.m4
+#
+# Results:
+#
+# Adds a --with-objc-foundation switch to configure.
+# Result is cached.
+#
+# Defines one of the following preprocessor macros:
+# APPLE_FOUNDATION GNUSTEP_FOUNDATION
+#------------------------------------------------------------------------
+AC_DEFUN([MP_OBJC_FOUNDATION],[
+ AC_REQUIRE([AC_PROG_OBJC])
+ AC_ARG_WITH(objc-foundation, [ --with-objc-foundation Specify either "GNUstep" or "apple"], [with_objc_foundation=${withval}])
+
+ if test x"${with_objc_foundation}" != x; then
+ case "${with_objc_foundation}" in
+ GNUstep)
+ ;;
+ GNU)
+ with_objc_foundation="GNUstep"
+ ;;
+ apple)
+ ;;
+ *)
+ AC_MSG_ERROR([${with_objc_foundation} is not a valid argument to --with-objc-foundation. Please specify either "GNU" or "apple"])
+ ;;
+ esac
+ fi
+
+ AC_LANG_PUSH([Objective C])
+
+ if test x"${with_objc_foundation}" == x || test x"${with_objc_foundation}" == x"apple"; then
+ # '@<:@' = '['
+ # '@:>@' = ']'
+ AC_MSG_CHECKING([for Apple Foundation library])
+
+ # Set NeXT LIBS and CFLAGS
+ APPLE_FOUNDATION_CFLAGS="-framework Foundation"
+ APPLE_FOUNDATION_LIBS="-framework Foundation"
+
+ AC_CACHE_VAL(ac_cv_objc_foundation_apple, [
+ # Save old LIBS and CFLAGS
+ LIBS_OLD="${LIBS}"
+ CFLAGS_OLD="${CFLAGS}"
+
+ CFLAGS="${APPLE_FOUNDATION_CFLAGS} ${CFLAGS}"
+ LIBS="${APPLE_FOUNDATION_LIBS} ${LIBS}"
+
+ AC_LINK_IFELSE([
+ AC_LANG_PROGRAM([
+ #include <Foundation/Foundation.h>
+ ], [
+ NSString *string = @<:@@<:@NSString alloc@:>@ initWithCString: "Hello World"@:>@;
+ @<:@NSString length@:>@;
+ ])
+ ],[
+ ac_cv_objc_foundation_apple="yes"
+ ],[
+ ac_cv_objc_foundation_apple="no"
+ ]
+ )
+ # Restore LIBS and CFLAGS
+ LIBS="${LIBS_OLD}"
+ CFLAGS="${CFLAGS_OLD}"
+ ])
+ AC_MSG_RESULT(${ac_cv_objc_foundation_apple})
+ else
+ ac_cv_objc_foundation_apple="no"
+ fi
+
+ if test x"${with_objc_foundation}" == x || test x${with_objc_foundation} == x"GNUstep"; then
+ if test x"${GNUSTEP_SYSTEM_ROOT}" == x; then
+ if test x"${with_objc_foundation}" == x"GNUstep"; then
+ AC_MSG_ERROR([GNUSTEP_SYSTEM_ROOT is not defined in your environment, preventing the use of GNUstep's Foundation library])
+ else
+ AC_MSG_WARN([GNUSTEP_SYSTEM_ROOT is not defined in your environment, preventing the use of GNUstep's Foundation library])
+ fi
+ else
+
+ AC_MSG_CHECKING([for GNUstep Foundation library])
+
+ # Set GNUstep LDFLAGS, CPPFLAGS, and LIBS
+ GNUSTEP_LDFLAGS="-L${GNUSTEP_SYSTEM_ROOT}/Library/Libraries/"
+ GNUSTEP_CPPFLAGS="-I${GNUSTEP_SYSTEM_ROOT}/Library/Headers/"
+ GNUSTEP_LIBS="-lgnustep-base"
+
+ AC_CACHE_VAL(ac_cv_objc_foundation_gnustep, [
+ # Save old LDFLAGS, CPPFLAGS, and LIBS
+ LDFLAGS_OLD="${LDFLAGS}"
+ CPPFLAGS_OLD="${CPPFLAGS}"
+ LIBS_OLD="${LIBS}"
+
+ LDFLAGS="${GNUSTEP_LDFLAGS} ${LDFLAGS}"
+ CPPFLAGS="${GNUSTEP_CPPFLAGS} ${CPPFLAGS}"
+ LIBS="${GNUSTEP_LIBS} ${LIBS}"
+
+ AC_LINK_IFELSE([
+ AC_LANG_PROGRAM([
+ #include <Foundation/Foundation.h>
+ ], [
+ NSString *string = @<:@@<:@NSString alloc@:>@ initWithCString: "Hello World"@:>@;
+ @<:@NSString length@:>@;
+ ])
+ ],[
+ ac_cv_objc_foundation_gnustep="yes"
+ ],[
+ ac_cv_objc_foundation_gnustep="no"
+ ]
+ )
+ # Restore LDFLAGS, CPPFLAGS, and LIBS
+ LDFLAGS="${LDFLAGS_OLD}"
+ CPPFLAGS="${CPPFLAGS_OLD}"
+ LIBS="${LIBS_OLD}"
+ ])
+ AC_MSG_RESULT(${ac_cv_objc_foundation_gnustep})
+ fi
+ else
+ ac_cv_objc_foundation_gnustep="no"
+ fi
+
+ # NeXT Foundation is prefered
+ if test x"${ac_cv_objc_foundation_apple}" == x"yes"; then
+ OBJC_FOUNDATION="Apple"
+ CPPFLAGS="${APPLE_FOUNDATION_CPPFLAGS} ${CPPFLAGS}"
+ LIBS="${APPLE_FOUNDATION_LIBS} ${LIBS}"
+ AC_DEFINE([APPLE_FOUNDATION], 1, [Define if using the Apple Foundation framework])
+ AC_MSG_NOTICE([Using Apple Foundation library])
+ elif test x"${ac_cv_objc_foundation_gnustep}" == x"yes"; then
+ OBJC_FOUNDATION="GNUstep"
+ CPPFLAGS="${GNUSTEP_CPPFLAGS} ${CPPFLAGS}"
+ LIBS="${GNUSTEP_LIBS} ${LIBS}"
+ LDFLAGS="${GNUSTEP_LDFLAGS} ${LDFLAGS}"
+ AC_DEFINE([GNUSTEP_FOUNDATION], 1, [Define if using the GNUstep Foundation library])
+ AC_MSG_NOTICE([Using GNUstep Foundation library])
+ else
+ AC_MSG_ERROR([Could not find a working Foundation implementation])
+ fi
+
+ AC_LANG_POP([Objective C])
+])
Added: trunk/base/objc.m4
===================================================================
--- trunk/base/objc.m4 (rev 0)
+++ trunk/base/objc.m4 2007-06-13 23:52:22 UTC (rev 26135)
@@ -0,0 +1,623 @@
+# objc.m4
+# Based on c.m4 from GNU Autoconf
+# The Objective C support, added by Landon Fuller <landonf at opendarwin.org>
+# on March 10th, 2004, is heavily based on Autoconf's existing C++ support.
+#
+########### Copyright and Licensing terms ##########
+#
+# This file is part of Autoconf. -*- Autoconf -*-
+# Programming languages support.
+# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+#
+# As a special exception, the Free Software Foundation gives unlimited
+# permission to copy, distribute and modify the configure scripts that
+# are the output of Autoconf. You need not follow the terms of the GNU
+# General Public License when using or distributing such scripts, even
+# though portions of the text of Autoconf appear in them. The GNU
+# General Public License (GPL) does govern all other use of the material
+# that constitutes the Autoconf program.
+#
+# Certain portions of the Autoconf source text are designed to be copied
+# (in certain cases, depending on the input) into the output of
+# Autoconf. We call these the "data" portions. The rest of the Autoconf
+# source text consists of comments plus executable code that decides which
+# of the data portions to output in any given case. We call these
+# comments and executable code the "non-data" portions. Autoconf never
+# copies any of the non-data portions into its output.
+#
+# This special exception to the GPL applies to versions of Autoconf
+# released by the Free Software Foundation. When you make and
+# distribute a modified version of Autoconf, you may extend this special
+# exception to the GPL to apply to your modified version as well, *unless*
+# your modified version has the potential to copy into its output some
+# of the text that was the non-data portion of the version that you started
+# with. (In other words, unless your change moves or copies text from
+# the non-data portions to the data portions.) If your modification has
+# such potential, you must delete any notice of this special exception
+# to the GPL from your modified version.
+#
+# Written by David MacKenzie, with help from
+# Franc,ois Pinard, Karl Berry, Richard Pixley, Ian Lance Taylor,
+# Roland McGrath, Noah Friedman, david d zuhn, and many others.
+#
+########## GNU General Public License (GPL), version 2 ##########
+#
+# GNU GENERAL PUBLIC LICENSE
+# Version 2, June 1991
+#
+# Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+# Everyone is permitted to copy and distribute verbatim copies
+# of this license document, but changing it is not allowed.
+#
+# Preamble
+#
+# The licenses for most software are designed to take away your
+# freedom to share and change it. By contrast, the GNU General Public
+# License is intended to guarantee your freedom to share and change free
+# software--to make sure the software is free for all its users. This
+# General Public License applies to most of the Free Software
+# Foundation's software and to any other program whose authors commit to
+# using it. (Some other Free Software Foundation software is covered by
+# the GNU Library General Public License instead.) You can apply it to
+# your programs, too.
+#
+# When we speak of free software, we are referring to freedom, not
+# price. Our General Public Licenses are designed to make sure that you
+# have the freedom to distribute copies of free software (and charge for
+# this service if you wish), that you receive source code or can get it
+# if you want it, that you can change the software or use pieces of it
+# in new free programs; and that you know you can do these things.
+#
+# To protect your rights, we need to make restrictions that forbid
+# anyone to deny you these rights or to ask you to surrender the rights.
+# These restrictions translate to certain responsibilities for you if you
+# distribute copies of the software, or if you modify it.
+#
+# For example, if you distribute copies of such a program, whether
+# gratis or for a fee, you must give the recipients all the rights that
+# you have. You must make sure that they, too, receive or can get the
+# source code. And you must show them these terms so they know their
+# rights.
+#
+# We protect your rights with two steps: (1) copyright the software, and
+# (2) offer you this license which gives you legal permission to copy,
+# distribute and/or modify the software.
+#
+# Also, for each author's protection and ours, we want to make certain
+# that everyone understands that there is no warranty for this free
+# software. If the software is modified by someone else and passed on, we
+# want its recipients to know that what they have is not the original, so
+# that any problems introduced by others will not reflect on the original
+# authors' reputations.
+#
+# Finally, any free program is threatened constantly by software
+# patents. We wish to avoid the danger that redistributors of a free
+# program will individually obtain patent licenses, in effect making the
+# program proprietary. To prevent this, we have made it clear that any
+# patent must be licensed for everyone's free use or not licensed at all.
+#
+# The precise terms and conditions for copying, distribution and
+# modification follow.
+#
+# GNU GENERAL PUBLIC LICENSE
+# TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+#
+# 0. This License applies to any program or other work which contains
+# a notice placed by the copyright holder saying it may be distributed
+# under the terms of this General Public License. The "Program", below,
+# refers to any such program or work, and a "work based on the Program"
+# means either the Program or any derivative work under copyright law:
+# that is to say, a work containing the Program or a portion of it,
+# either verbatim or with modifications and/or translated into another
+# language. (Hereinafter, translation is included without limitation in
+# the term "modification".) Each licensee is addressed as "you".
+#
+# Activities other than copying, distribution and modification are not
+# covered by this License; they are outside its scope. The act of
+# running the Program is not restricted, and the output from the Program
+# is covered only if its contents constitute a work based on the
+# Program (independent of having been made by running the Program).
+# Whether that is true depends on what the Program does.
+#
+# 1. You may copy and distribute verbatim copies of the Program's
+# source code as you receive it, in any medium, provided that you
+# conspicuously and appropriately publish on each copy an appropriate
+# copyright notice and disclaimer of warranty; keep intact all the
+# notices that refer to this License and to the absence of any warranty;
+# and give any other recipients of the Program a copy of this License
+# along with the Program.
+#
+# You may charge a fee for the physical act of transferring a copy, and
+# you may at your option offer warranty protection in exchange for a fee.
+#
+# 2. You may modify your copy or copies of the Program or any portion
+# of it, thus forming a work based on the Program, and copy and
+# distribute such modifications or work under the terms of Section 1
+# above, provided that you also meet all of these conditions:
+#
+# a) You must cause the modified files to carry prominent notices
+# stating that you changed the files and the date of any change.
+#
+# b) You must cause any work that you distribute or publish, that in
+# whole or in part contains or is derived from the Program or any
+# part thereof, to be licensed as a whole at no charge to all third
+# parties under the terms of this License.
+#
+# c) If the modified program normally reads commands interactively
+# when run, you must cause it, when started running for such
+# interactive use in the most ordinary way, to print or display an
+# announcement including an appropriate copyright notice and a
+# notice that there is no warranty (or else, saying that you provide
+# a warranty) and that users may redistribute the program under
+# these conditions, and telling the user how to view a copy of this
+# License. (Exception: if the Program itself is interactive but
+# does not normally print such an announcement, your work based on
+# the Program is not required to print an announcement.)
+#
+# These requirements apply to the modified work as a whole. If
+# identifiable sections of that work are not derived from the Program,
+# and can be reasonably considered independent and separate works in
+# themselves, then this License, and its terms, do not apply to those
+# sections when you distribute them as separate works. But when you
+# distribute the same sections as part of a whole which is a work based
+# on the Program, the distribution of the whole must be on the terms of
+# this License, whose permissions for other licensees extend to the
+# entire whole, and thus to each and every part regardless of who wrote it.
+#
+# Thus, it is not the intent of this section to claim rights or contest
+# your rights to work written entirely by you; rather, the intent is to
+# exercise the right to control the distribution of derivative or
+# collective works based on the Program.
+#
+# In addition, mere aggregation of another work not based on the Program
+# with the Program (or with a work based on the Program) on a volume of
+# a storage or distribution medium does not bring the other work under
+# the scope of this License.
+#
+# 3. You may copy and distribute the Program (or a work based on it,
+# under Section 2) in object code or executable form under the terms of
+# Sections 1 and 2 above provided that you also do one of the following:
+#
+# a) Accompany it with the complete corresponding machine-readable
+# source code, which must be distributed under the terms of Sections
+# 1 and 2 above on a medium customarily used for software interchange; or,
+#
+# b) Accompany it with a written offer, valid for at least three
+# years, to give any third party, for a charge no more than your
+# cost of physically performing source distribution, a complete
+# machine-readable copy of the corresponding source code, to be
+# distributed under the terms of Sections 1 and 2 above on a medium
+# customarily used for software interchange; or,
+#
+# c) Accompany it with the information you received as to the offer
+# to distribute corresponding source code. (This alternative is
+# allowed only for noncommercial distribution and only if you
+# received the program in object code or executable form with such
+# an offer, in accord with Subsection b above.)
+#
+# The source code for a work means the preferred form of the work for
+# making modifications to it. For an executable work, complete source
+# code means all the source code for all modules it contains, plus any
+# associated interface definition files, plus the scripts used to
+# control compilation and installation of the executable. However, as a
+# special exception, the source code distributed need not include
+# anything that is normally distributed (in either source or binary
+# form) with the major components (compiler, kernel, and so on) of the
+# operating system on which the executable runs, unless that component
+# itself accompanies the executable.
+#
+# If distribution of executable or object code is made by offering
+# access to copy from a designated place, then offering equivalent
+# access to copy the source code from the same place counts as
+# distribution of the source code, even though third parties are not
+# compelled to copy the source along with the object code.
+#
+# 4. You may not copy, modify, sublicense, or distribute the Program
+# except as expressly provided under this License. Any attempt
+# otherwise to copy, modify, sublicense or distribute the Program is
+# void, and will automatically terminate your rights under this License.
+# However, parties who have received copies, or rights, from you under
+# this License will not have their licenses terminated so long as such
+# parties remain in full compliance.
+#
+# 5. You are not required to accept this License, since you have not
+# signed it. However, nothing else grants you permission to modify or
+# distribute the Program or its derivative works. These actions are
+# prohibited by law if you do not accept this License. Therefore, by
+# modifying or distributing the Program (or any work based on the
+# Program), you indicate your acceptance of this License to do so, and
+# all its terms and conditions for copying, distributing or modifying
+# the Program or works based on it.
+
+# 6. Each time you redistribute the Program (or any work based on the
+# Program), the recipient automatically receives a license from the
+# original licensor to copy, distribute or modify the Program subject to
+# these terms and conditions. You may not impose any further
+# restrictions on the recipients' exercise of the rights granted herein.
+# You are not responsible for enforcing compliance by third parties to
+# this License.
+#
+# 7. If, as a consequence of a court judgment or allegation of patent
+# infringement or for any other reason (not limited to patent issues),
+# conditions are imposed on you (whether by court order, agreement or
+# otherwise) that contradict the conditions of this License, they do not
+# excuse you from the conditions of this License. If you cannot
+# distribute so as to satisfy simultaneously your obligations under this
+# License and any other pertinent obligations, then as a consequence you
+# may not distribute the Program at all. For example, if a patent
+# license would not permit royalty-free redistribution of the Program by
+# all those who receive copies directly or indirectly through you, then
+# the only way you could satisfy both it and this License would be to
+# refrain entirely from distribution of the Program.
+#
+# If any portion of this section is held invalid or unenforceable under
+# any particular circumstance, the balance of the section is intended to
+# apply and the section as a whole is intended to apply in other
+# circumstances.
+#
+# It is not the purpose of this section to induce you to infringe any
+# patents or other property right claims or to contest validity of any
+# such claims; this section has the sole purpose of protecting the
+# integrity of the free software distribution system, which is
+# implemented by public license practices. Many people have made
+# generous contributions to the wide range of software distributed
+# through that system in reliance on consistent application of that
+# system; it is up to the author/donor to decide if he or she is willing
+# to distribute software through any other system and a licensee cannot
+# impose that choice.
+#
+# This section is intended to make thoroughly clear what is believed to
+# be a consequence of the rest of this License.
+#
+# 8. If the distribution and/or use of the Program is restricted in
+# certain countries either by patents or by copyrighted interfaces, the
+# original copyright holder who places the Program under this License
+# may add an explicit geographical distribution limitation excluding
+# those countries, so that distribution is permitted only in or among
+# countries not thus excluded. In such case, this License incorporates
+# the limitation as if written in the body of this License.
+#
+# 9. The Free Software Foundation may publish revised and/or new versions
+# of the General Public License from time to time. Such new versions will
+# be similar in spirit to the present version, but may differ in detail to
+# address new problems or concerns.
+#
+# Each version is given a distinguishing version number. If the Program
+# specifies a version number of this License which applies to it and "any
+# later version", you have the option of following the terms and conditions
+# either of that version or of any later version published by the Free
+# Software Foundation. If the Program does not specify a version number of
+# this License, you may choose any version ever published by the Free Software
+# Foundation.
+#
+# 10. If you wish to incorporate parts of the Program into other free
+# programs whose distribution conditions are different, write to the author
+# to ask for permission. For software which is copyrighted by the Free
+# Software Foundation, write to the Free Software Foundation; we sometimes
+# make exceptions for this. Our decision will be guided by the two goals
+# of preserving the free status of all derivatives of our free software and
+# of promoting the sharing and reuse of software generally.
+#
+# NO WARRANTY
+#
+# 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+# FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+# OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+# PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+# OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+# TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+# PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+# REPAIR OR CORRECTION.
+#
+# 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+# WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+# REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+# INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+# OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+# TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+# YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+# PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGES.
+#
+# END OF TERMS AND CONDITIONS
+#
+# How to Apply These Terms to Your New Programs
+#
+# If you develop a new program, and you want it to be of the greatest
+# possible use to the public, the best way to achieve this is to make it
+# free software which everyone can redistribute and change under these terms.
+#
+# To do so, attach the following notices to the program. It is safest
+# to attach them to the start of each source file to most effectively
+# convey the exclusion of warranty; and each file should have at least
+# the "copyright" line and a pointer to where the full notice is found.
+#
+# <one line to give the program's name and a brief idea of what it does.>
+# Copyright (C) <year> <name of author>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+#
+# Also add information on how to contact you by electronic and paper mail.
+#
+# If the program is interactive, make it output a short notice like this
+# when it starts in an interactive mode:
+#
+# Gnomovision version 69, Copyright (C) year name of author
+# Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+# This is free software, and you are welcome to redistribute it
+# under certain conditions; type `show c' for details.
+#
+# The hypothetical commands `show w' and `show c' should show the appropriate
+# parts of the General Public License. Of course, the commands you use may
+# be called something other than `show w' and `show c'; they could even be
+# mouse-clicks or menu items--whatever suits your program.
+#
+# You should also get your employer (if you work as a programmer) or your
+# school, if any, to sign a "copyright disclaimer" for the program, if
+# necessary. Here is a sample; alter the names:
+#
+# Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+# `Gnomovision' (which makes passes at compilers) written by James Hacker.
+#
+# <signature of Ty Coon>, 1 April 1989
+# Ty Coon, President of Vice
+#
+# This General Public License does not permit incorporating your program into
+# proprietary programs. If your program is a subroutine library, you may
+# consider it more useful to permit linking proprietary applications with the
+# library. If this is what you want to do, use the GNU Library General
+# Public License instead of this License.
+#
+########## End of GNU General Public License (GPL), version 2 ##########
+
+## ----------------------- ##
+## 1. Language selection. ##
+## ----------------------- ##
+
+
+# ------------------------------ #
+# 1d. The Objective C language. #
+# ------------------------------ #
+
+# AC_LANG(Objective C)
+# --------------------
+# OBJCFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+m4_define([AC_LANG(Objective C)],
+[ac_ext=m
+ac_cpp='$OBJCPP $CPPFLAGS'
+ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&AS_MESSAGE_LOG_FD'
+ac_link='$OBJC -o conftest$ac_exeext $OBJCFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&AS_MESSAGE_LOG_FD'
+ac_compiler_gnu=$ac_cv_objc_compiler_gnu
+])
+
+
+# AC_LANG_OBJC
+# -------------------------
+AU_DEFUN([AC_LANG_OBJC], [AC_LANG(Objective C)])
+
+
+# _AC_LANG_ABBREV(Objective C)
+# ----------------------------
+m4_define([_AC_LANG_ABBREV(Objective C)], [objc])
+
+
+# _AC_LANG_PREFIX(Objective C)
+# ----------------------------
+m4_define([_AC_LANG_PREFIX(Objective C)], [OBJC])
+
+
+
+## ---------------------- ##
+## 2.Producing programs. ##
+## ---------------------- ##
+
+
+# ------------------------- #
+# 2d. Objective C sources. #
+# ------------------------- #
+
+# AC_LANG_SOURCE(Objective C)(BODY)
+# ---------------------------------
+m4_copy([AC_LANG_SOURCE(C)], [AC_LANG_SOURCE(Objective C)])
+
+
+# AC_LANG_PROGRAM(Objective C)([PROLOGUE], [BODY])
+# ------------------------------------------------
+m4_copy([AC_LANG_PROGRAM(C)], [AC_LANG_PROGRAM(Objective C)])
+
+
+# AC_LANG_CALL(Objective C)(PROLOGUE, FUNCTION)
+# ---------------------------------------------
+m4_copy([AC_LANG_CALL(C)], [AC_LANG_CALL(Objective C)])
+
+
+# AC_LANG_FUNC_LINK_TRY(Objective C)(FUNCTION)
+# --------------------------------------------
+m4_copy([AC_LANG_FUNC_LINK_TRY(C)], [AC_LANG_FUNC_LINK_TRY(Objective C)])
+
+
+# AC_LANG_BOOL_COMPILE_TRY(Objective C)(PROLOGUE, EXPRESSION)
+# -----------------------------------------------------------
+m4_copy([AC_LANG_BOOL_COMPILE_TRY(C)], [AC_LANG_BOOL_COMPILE_TRY(Objective C)])
+
+
+# AC_LANG_INT_SAVE(Objective C)(PROLOGUE, EXPRESSION)
+# ---------------------------------------------------
+m4_copy([AC_LANG_INT_SAVE(C)], [AC_LANG_INT_SAVE(Objective C)])
+
+
+
+## -------------------------------------------- ##
+## 3. Looking for Compilers and Preprocessors. ##
+## -------------------------------------------- ##
+
+
+# ------------------------------ #
+# 3d. The Objective C compiler. #
+# ------------------------------ #
+
+
+# AC_LANG_PREPROC(Objecitve C)
+# ----------------------------
+# Find the Objective C preprocessor. Must be AC_DEFUN'd to be AC_REQUIRE'able.
+AC_DEFUN([AC_LANG_PREPROC(Objective C)],
+[AC_REQUIRE([AC_PROG_OBJCPP])])
+
+
+# AC_PROG_OBJCPP
+# --------------
+# Find a working Objective C preprocessor.
+# We shouldn't have to require AC_PROG_CC, but this is due to the concurrency
+# between the AC_LANG_COMPILER_REQUIRE family and that of AC_PROG_OBJC.
+AC_DEFUN([AC_PROG_OBJCPP],
+[AC_REQUIRE([AC_PROG_OBJC])dnl
+AC_ARG_VAR([OBJCPP], [Objective C preprocessor])dnl
+_AC_ARG_VAR_CPPFLAGS()dnl
+AC_LANG_PUSH(Objective C)dnl
+AC_MSG_CHECKING([how to run the Objective C preprocessor])
+if test -z "$OBJCPP"; then
+ AC_CACHE_VAL(ac_cv_prog_OBJCPP,
+ [dnl
+ # Double quotes because OBJCPP needs to be expanded
+ for OBJCPP in "$OBJC -E" "/lib/cpp"
+ do
+ _AC_PROG_PREPROC_WORKS_IFELSE([break])
+ done
+ ac_cv_prog_OBJCPP=$OBJCPP
+ ])dnl
+ OBJCPP=$ac_cv_prog_OBJCPP
+else
+ ac_cv_prog_OBJCPP=$OBJCPP
+fi
+AC_MSG_RESULT([$OBJCPP])
+_AC_PROG_PREPROC_WORKS_IFELSE([],
+ [AC_MSG_FAILURE([Objective C preprocessor "$OBJCPP" fails sanity check])])
+AC_SUBST(OBJCPP)dnl
+AC_LANG_POP(Objective C)dnl
+])# AC_PROG_OBJCPP
+
+
+# AC_LANG_COMPILER(Objective C)
+# -----------------------------
+# Find the Objective C compiler. Must be AC_DEFUN'd to be AC_REQUIRE'able.
+AC_DEFUN([AC_LANG_COMPILER(Objective C)],
+[AC_REQUIRE([AC_PROG_OBJC])])
+
+
+# ac_cv_prog_objc
+# ---------------
+# We used to name the cache variable this way.
+AU_DEFUN([ac_cv_prog_objc],
+[ac_cv_objc_compiler_gnu])
+
+
+# AC_PROG_OBJC([LIST-OF-COMPILERS])
+# ---------------------------------
+# LIST-OF-COMPILERS is a space separated list of Objective C compilers
+# to search for (if not specified, a default list is used). This just gives
+# the user an opportunity to specify an alternative search list for the
+# Objective C compiler.
+# cc Native compiler
+# objc David Stes' Portable Object Compiler
+AN_MAKEVAR([OBJC], [AC_PROG_OBJC])
+AN_PROGRAM([gcc], [AC_PROG_OBJC])
+AN_PROGRAM([cc], [AC_PROG_OBJC])
+AC_DEFUN([AC_PROG_OBJC],
+[AC_LANG_PUSH(Objective C)dnl
+AC_ARG_VAR([OBJC], [Objective C compiler command])dnl
+AC_ARG_VAR([OBJCFLAGS], [Objective C compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+_AC_ARG_VAR_CPPFLAGS()dnl
+AC_CHECK_TOOLS(OBJC,
+ [$CCC m4_default([$1],
+ [gcc cc objc])],
+ gcc)
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for _AC_LANG compiler version" >&AS_MESSAGE_LOG_FD
+ac_compiler=`set X $ac_compile; echo $[2]`
+_AC_EVAL([$ac_compiler --version </dev/null >&AS_MESSAGE_LOG_FD])
+_AC_EVAL([$ac_compiler -v </dev/null >&AS_MESSAGE_LOG_FD])
+_AC_EVAL([$ac_compiler -V </dev/null >&AS_MESSAGE_LOG_FD])
+
+m4_expand_once([_AC_COMPILER_EXEEXT])[]dnl
+m4_expand_once([_AC_COMPILER_OBJEXT])[]dnl
+_AC_LANG_COMPILER_GNU
+GOBJC=`test $ac_compiler_gnu = yes && echo yes`
+_AC_PROG_OBJC_G
+AC_LANG_POP(Objective C)dnl
+])# AC_PROG_OBJC
+
+
+# _AC_PROG_OBJC_G
+# ---------------
+# Check whether -g works, even if OBJCFLAGS is set, in case the package
+# plays around with OBJCFLAGS (such as to build both debugging and
+# normal versions of a library), tasteless as that idea is.
+m4_define([_AC_PROG_OBJC_G],
+[ac_test_OBJCFLAGS=${OBJCFLAGS+set}
+ac_save_OBJCFLAGS=$OBJCFLAGS
+OBJCFLAGS="-g"
+AC_CACHE_CHECK(whether $OBJC accepts -g, ac_cv_prog_objc_g,
+ [_AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
+ [ac_cv_prog_objc_g=yes],
+ [ac_cv_prog_objc_g=no])])
+if test "$ac_test_OBJCFLAGS" = set; then
+ OBJCFLAGS=$ac_save_OBJCFLAGS
+elif test $ac_cv_prog_objc_g = yes; then
+ if test "$GOBJC" = yes; then
+ OBJCFLAGS="-g -O2"
+ else
+ OBJCFLAGS="-g"
+ fi
+else
+ if test "$GOBJC" = yes; then
+ OBJCFLAGS="-O2"
+ else
+ OBJCFLAGS=
+ fi
+fi[]dnl
+])# _AC_PROG_OBJC_G
+
+
+## ------------------------------- ##
+## 4. Compilers' characteristics. ##
+## ------------------------------- ##
+
+
+# -------------------------------- #
+# 4b. C compiler characteristics. #
+# -------------------------------- #
+
+# libobjc and objc header tests shere?
Modified: trunk/base/src/config.h.in
===================================================================
--- trunk/base/src/config.h.in 2007-06-13 21:08:52 UTC (rev 26134)
+++ trunk/base/src/config.h.in 2007-06-13 23:52:22 UTC (rev 26135)
@@ -1,8 +1,20 @@
/* src/config.h.in. Generated from configure.ac by autoheader. */
+/* Define if using the Apple Foundation framework */
+#undef APPLE_FOUNDATION
+
+/* Define if using the Apple Objective-C runtime and compiler. */
+#undef APPLE_RUNTIME
+
/* Define to 1 if the `closedir' function returns void instead of `int'. */
#undef CLOSEDIR_VOID
+/* Define if using the GNUstep Foundation library */
+#undef GNUSTEP_FOUNDATION
+
+/* Define if using the GNU Objective-C runtime and compiler. */
+#undef GNU_RUNTIME
+
/* Define to 1 if you have the `bzero' function. */
#undef HAVE_BZERO
@@ -111,6 +123,9 @@
/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
#undef HAVE_NDIR_H
+/* Define to 1 if you have the <objc/objc.h> header file. */
+#undef HAVE_OBJC_OBJC_H
+
/* Define to 1 if you have the <openssl/md5.h> header file. */
#undef HAVE_OPENSSL_MD5_H
@@ -218,6 +233,9 @@
/* Lowest non-system-reserved UID. */
#undef MIN_USABLE_UID
+/* Mark private symbols */
+#undef MP_PRIVATE
+
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.macosforge.org/pipermail/macports-changes/attachments/20070613/ab0ce004/attachment.html
More information about the macports-changes
mailing list