[35635] trunk/dports/PortIndex

Tue Apr 1 00:44:36 PDT 2008

Revision: 35635
          http://trac.macosforge.org/projects/macports/changeset/35635
Author:   dluke at macports.org
Date:     2008-04-01 00:44:33 -0700 (Tue, 01 Apr 2008)

Log Message:
-----------

Total number of ports parsed:	4622 
Ports successfully parsed:	4622	 
Ports failed:			0

Modified Paths:
--------------
    trunk/dports/PortIndex

Modified: trunk/dports/PortIndex
===================================================================

--- trunk/dports/PortIndex	2008-04-01 05:35:05 UTC (rev 35634)
+++ trunk/dports/PortIndex	2008-04-01 07:44:33 UTC (rev 35635)
@@ -465,7 +465,7 @@
 gerbv 533
 variants universal portdir cad/gerbv description {Gerber Viewer (gerbv) is a viewer for Gerber files} homepage http://gerbv.sourceforge.net/ epoch 0 platforms darwin name gerbv depends_lib {lib:libgtk2:gtk2 lib:libpng:libpng} maintainers darwinports at zonque.org long_description {Gerber Viewer (gerbv) is a viewer for Gerber files. Gerber files are generated from PCB CAD system and sent to PCB manufacturers as basis for the manufacturing process. The standard supported by gerbv is RS-274X.} version 1.0.1 categories cad revision 0
 gtkwave 476
-variants universal portdir cad/gtkwave description {A viewer for common electronic CAD waveform files.} homepage http://home.nc.rr.com/gtkwave epoch 0 platforms darwin name gtkwave depends_lib port:gtk2 maintainers gwright at macports.org long_description {GTKWave is a fully featured GTK+ based wave viewer for Unix and Win32 which reads LXT, LXT2, VZT, and GHW files as well as standard Verilog VCD/EVCD files and allows their viewing.} version 3.1.6 categories cad revision 0
+variants universal portdir cad/gtkwave description {A viewer for common electronic CAD waveform files.} homepage http://home.nc.rr.com/gtkwave epoch 0 platforms darwin name gtkwave depends_lib port:gtk2 maintainers gwright at macports.org long_description {GTKWave is a fully featured GTK+ based wave viewer for Unix and Win32 which reads LXT, LXT2, VZT, and GHW files as well as standard Verilog VCD/EVCD files and allows their viewing.} version 3.1.7 categories cad revision 0
 dgpsip 1614
 variants universal description {Differential GPS over IP communication device} portdir comms/dgpsip homepage http://www.wsrcc.com/wolfgang/gps/dgps-ip.html epoch 0 platforms {darwin freebsd} name dgpsip long_description {On a stationary GPS without a differential correction signal, you should see a 20 m average radius {drunken walk} pattern. On the same receiver with DGPS corrections and a good view of the sky, the error the same receiver with DGPS corrections and a good view of the sky, the error should be reduced to approximately 2 m average radius. If you've always wanted to know exactly where your house is located without that annoying GPS wander, but didn't want to spend the money for a DGPS radio, here is your big chance! I'd like to announce a fun DGPS hack. I've written a small Un*x server and client for redistributing DGPS correction signals over the Net. Basically the server grabs the serial byte stream from my DGPS radio and sends it off over a TCP connection. The
  client does the same thing but in reverse. The result is that you can receive the local DGPS corrections from absolutely anywhere by using the Internet as the world's largest extension cord. You'll still need to be within 1000 miles or so of San Francisco, California, USA for best results. However chances are better error will still be reduced if you are 2000 to 3000 miles away. Several respondents from 2000 miles away have noted that the remote differential signals have diminished the SA-induced position and velocity errors by approximately 3 times.} maintainers nomaintainer categories comms version 1.32 revision 0
 gnokii 650
@@ -3981,7 +3981,7 @@
 lp_solve 520
 variants universal description {Linear Programming Solver} portdir math/lp_solve homepage http://lpsolve.sourceforge.net/5.5/ epoch 0 platforms darwin name lp_solve long_description {Mixed Integer Linear Programming (MILP) solver. lp_solve solves pure linear, (mixed) integer/binary, semi-continuous and special ordered sets (SOS) models. lp_solve is written in ANSI C and can be compiled on many different platforms like Mac OS X, Linux and Windows.} maintainers nomaintainer categories math version 5.5.0.9 revision 0
 mathomatic 483
-variants universal portdir math/mathomatic description {small, portable symbolic math program} homepage http://mathomatic.orgserve.de/math/ epoch 0 platforms darwin name mathomatic depends_lib port:readline maintainers mww long_description {Mathomatic is a small, portable symbolic math program that can automatically solve, simplify, differentiate, combine, and compare algebraic equations, perform polynomial and complex arithmetic, etc.} version 12.9.0 categories math revision 0
+variants universal portdir math/mathomatic description {small, portable symbolic math program} homepage http://mathomatic.orgserve.de/math/ epoch 0 platforms darwin name mathomatic depends_lib port:readline maintainers mww long_description {Mathomatic is a small, portable symbolic math program that can automatically solve, simplify, differentiate, combine, and compare algebraic equations, perform polynomial and complex arithmetic, etc.} version 12.9.1 categories math revision 0
 maxima 724
 variants {universal clisp test printable_doc} portdir math/maxima description {The Maxima computer algebra system} homepage http://maxima.sourceforge.net/ epoch 0 depends_run {port:sbcl port:tk port:recode port:gnuplot} platforms darwin name maxima maintainers nomaintainer long_description {The Maxima computer algebra system is a descendant of DOE Macsyma, a version of MIT's Macsyma whose development was supported by the U.S. Department of Energy. Through the effort of the late William Shelter of the University of Texas, it was released under the GNU General Public License. It is one of the more comprehensive and powerful computer algebra systems available as open source.} version 5.14.0 categories math revision 1
 metis 621
@@ -4643,7 +4643,7 @@
 slurm 522
 variants universal description {generic network load monitor} portdir net/slurm homepage http://www.wormulon.net/slurm/ epoch 0 platforms {darwin freebsd netbsd openbsd} name slurm long_description {slurm started as a port of pppstatus to FreeBSD and now is a generic curses based network load monitor. It features three different modes with real-time ASCII graphs and interface statistics for all kinds of network interfaces on most Unix systems.} maintainers hscholz at wormulon.net categories net version 0.3.3 revision 0
 smokeping 887
-variants {universal apple_apache} portdir net/smokeping description {A deluxe latency logging and graphing system.} homepage http://oss.oetiker.ch/smokeping/ epoch 0 platforms darwin name smokeping depends_lib {port:rrdtool port:p5-libwww-perl port:p5-cgi-speedycgi port:p5-cgi port:p5-time-hires port:p5-socket6 port:p5-net-snmp port:p5-net port:p5-net-telnet port:p5-net-dns port:p5-net-radius port:p5-perl-ldap port:p5-io-socket-ssl port:p5-pathtools port:p5-snmp_session port:fping port:echoping port:curl} maintainers markd long_description {SmokePing is a deluxe latency measurement tool. It can measure, store, and display latency, latency distribution, and packet loss. SmokePing uses RRDtool to maintain a longterm data-store and to draw pretty graphs, giving up to the minute information on the state of each network connection.} version 2.3.1 categories {net perl} revision 0
+variants {universal apple_apache} portdir net/smokeping description {A deluxe latency logging and graphing system.} homepage http://oss.oetiker.ch/smokeping/ epoch 0 platforms darwin name smokeping depends_lib {port:rrdtool port:p5-libwww-perl port:p5-cgi-speedycgi port:p5-cgi port:p5-time-hires port:p5-socket6 port:p5-net-snmp port:p5-net port:p5-net-telnet port:p5-net-dns port:p5-net-radius port:p5-perl-ldap port:p5-io-socket-ssl port:p5-pathtools port:p5-snmp_session port:fping port:echoping port:curl} maintainers markd long_description {SmokePing is a deluxe latency measurement tool. It can measure, store, and display latency, latency distribution, and packet loss. SmokePing uses RRDtool to maintain a longterm data-store and to draw pretty graphs, giving up to the minute information on the state of each network connection.} version 2.3.5 categories {net perl} revision 0
 snarf 421
 variants universal description {Simple Non-interactive All-purpose Resource Fetcher} portdir net/snarf homepage http://www.xach.com/snarf/ epoch 0 platforms darwin name snarf long_description {snarf is a command line resource grabber. It can transfer files through the http, gopher, finger, and ftp protocols without user interaction. It is small and fast.} maintainers nomaintainer categories net version 7.0 revision 0
 snmptt 460
@@ -4935,7 +4935,7 @@
 p5-cgi-simple 435
 variants universal portdir perl/p5-cgi-simple description {A Simple totally OO CGI interface that is CGI.pm compliant} homepage http://search.cpan.org/dist/CGI-Simple/ epoch 0 platforms darwin name p5-cgi-simple depends_lib {{path:\${prefix}/bin/perl:perl5.8} port:p5-version} maintainers {narf_tm openmaintainer} long_description {{A Simple totally OO CGI interface that is CGI.pm compliant}} version 1.103 categories perl revision 0
 p5-cgi-speedycgi 600
-variants {universal apple_apache} portdir perl/p5-cgi-speedycgi description {Speed up perl CGI scripts by running them persistently} homepage http://search.cpan.org/dist/CGI-SpeedyCGI/ epoch 0 platforms darwin name p5-cgi-speedycgi depends_lib port:apache2 maintainers markd at macports.org long_description {SpeedyCGI is a way to run perl scripts persistently, which can make them run much more quickly. A script can be made to to run persistently by changing the interpreter line at the top of a script from: '#!/_prefix_/bin/perl' to '#!/_prefix_/bin/speedy'} version 2.22 categories perl revision 1
+variants {universal apple_apache} portdir perl/p5-cgi-speedycgi description {Speed up perl CGI scripts by running them persistently} homepage http://search.cpan.org/dist/CGI-SpeedyCGI/ epoch 0 platforms darwin name p5-cgi-speedycgi depends_lib port:apache2 maintainers markd at macports.org long_description {SpeedyCGI is a way to run perl scripts persistently, which can make them run much more quickly. A script can be made to to run persistently by changing the interpreter line at the top of a script from: '#!/_prefix_/bin/perl' to '#!/_prefix_/bin/speedy'} version 2.22 categories perl revision 2
 p5-chart 355
 variants universal portdir perl/p5-chart description {Create png/jpeg images with charts} homepage http://search.cpan.org/dist/Chart/ epoch 0 platforms darwin name p5-chart depends_lib {{path:\${prefix}/bin/perl:perl5.8} port:p5-gd} maintainers nomaintainer long_description {{Create png/jpeg images with charts}} version 2.4.1 categories perl revision 0
 p5-class-accessor 485
@@ -7436,6 +7436,8 @@
 variants universal description {Verilog Behavioral Simulator} portdir science/vbs homepage http://www.flex.com/~jching/ epoch 0 platforms darwin name vbs long_description {This is the public release of the Verilog Behavioral Simulator. Verilog is a Hardware Description Language used mostly for digital circuit design and simulation. This program is a simple implementation of a Verilog simulator. VBS tries to implement all of the Verilog behavioral constructs that are synthesizable, but still allow complex test vectors for simulation.} maintainers nomaintainer categories science version 1.4.0 revision 0
 veriwell 541
 variants universal portdir science/veriwell description {VeriWell Verilog Simulator} homepage http://sourceforge.net/projects/veriwell epoch 0 platforms darwin name veriwell depends_lib port:help2man maintainers nomaintainer long_description {VeriWell is a full Verilog simulator. It supports nearly all of the IEEE1364-1995 standard, as well as PLI 1.0. Yes, VeriWell *is* the same simulator that was sold by Wellspring Solutions in the mid-1990 and was included with the Thomas and Moorby book} version 2.8.5 categories science revision 0
+wview 1196
+variants {universal env mysql5 pgresql vpro wxt510 ws2300 sim http} variant_desc {env { Install config files and templates (first time install) } mysql5 { Includes mySQL5 database support } pgresql { Includes Postgresql database support } vpro { Support for Davis Vantage Pro WX Station } wxt510 { Support for Vaisala WXT-510 WX Station } ws2300 { Support for the La Crosse WS-2300 series stations } sim { Support for the Simulated WX Station } http { Enable support for uploading data to Weather Underground }} portdir science/wview description {Daemons that download and archive data from supported weather stations} homepage http://wviewweather.com/ epoch 0 platforms darwin name wview depends_lib {port:gd2 port:radlib} maintainers mac.com:mbrooksclark long_description {wview is a unix application for weather stations. It archives weather data from the station. Generates full html web sites with graphics. ftp/ssh export capability. MySQL/PostgreSQL archiving. International. Weathe
 r alarms. Data feed. RSS feed. Stations currently supported include: Davis Vantage Pro/Pro2, Vaisala WXT-510, La Crosse WS-2300, and a weather station simulator.} version 3.7.3 categories science revision 0
 xastir 399
 variants universal description {Amateur Radio APRS tracking software} portdir science/xastir homepage http://www.xastir.org/ epoch 0 platforms darwin depends_lib {lib:libX11.6:XFree86 port:openmotif port:libgeotiff port:freetype port:ImageMagick port:gdal port:pcre port:db44 port:tiff port:proj port:shapelib} name xastir maintainers shadow at dementia.org categories science version 1.8.4 revision 1
 xephem 717

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.macosforge.org/pipermail/macports-changes/attachments/20080401/82a38d8f/attachment.html
