[43832] trunk/dports/print/libpaper

[devans at macports.org]

Revision: 43832
          http://trac.macports.org/changeset/43832
Author:   devans at macports.org
Date:     2008-12-15 13:05:07 -0800 (Mon, 15 Dec 2008)
Log Message:
-----------
libpaper: lint, fix livecheck, add mode line, rename patch files to conform to recommendations.

Modified Paths:
--------------
    trunk/dports/print/libpaper/Portfile

Added Paths:
-----------
    trunk/dports/print/libpaper/files/patch-Makefile.in.diff
    trunk/dports/print/libpaper/files/patch-config.guess.diff
    trunk/dports/print/libpaper/files/patch-paper.c.diff
    trunk/dports/print/libpaper/files/patch-paperconf.c.diff

Removed Paths:
-------------
    trunk/dports/print/libpaper/files/patch-Makefile.in
    trunk/dports/print/libpaper/files/patch-config.guess
    trunk/dports/print/libpaper/files/patch-paper.c
    trunk/dports/print/libpaper/files/patch-paperconf.c

Modified: trunk/dports/print/libpaper/Portfile
===================================================================
--- trunk/dports/print/libpaper/Portfile	2008-12-15 21:03:03 UTC (rev 43831)
+++ trunk/dports/print/libpaper/Portfile	2008-12-15 21:05:07 UTC (rev 43832)
@@ -1,6 +1,8 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
 # $Id$
 
 PortSystem	1.0
+
 name		libpaper
 version		1.1.21
 set base_version	1.1.21
@@ -24,13 +26,16 @@
 
 worksrcdir	${name}-${base_version}
 
-patchfiles	patch-config.guess	\
-		patch-paper.c		\
-		patch-paperconf.c	\
-		patch-Makefile.in
+patchfiles	patch-config.guess.diff	\
+		patch-paper.c.diff	\
+		patch-paperconf.c.diff	\
+		patch-Makefile.in.diff
 
 pre-configure	{ system "touch ${worksrcpath}/config.sub" }
 
 configure.args	--mandir=${prefix}/share/man	\
 		--sysconfdir=${prefix}/etc
 
+livecheck.check regex
+livecheck.url   http://ftp.us.debian.org/debian/pool/main/libp/${name}/
+livecheck.regex "${name}_(\\d+(?:\\.\\d+)*)${extract.suffix}"

Deleted: trunk/dports/print/libpaper/files/patch-Makefile.in
===================================================================
--- trunk/dports/print/libpaper/files/patch-Makefile.in	2008-12-15 21:03:03 UTC (rev 43831)
+++ trunk/dports/print/libpaper/files/patch-Makefile.in	2008-12-15 21:05:07 UTC (rev 43832)
@@ -1,11 +0,0 @@
---- lib/Makefile.in.sav	Tue Feb 22 10:19:05 2005
-+++ lib/Makefile.in	Tue Feb 22 10:20:05 2005
-@@ -543,7 +543,7 @@
- 	       if ($$4 == "mm") factor = 72.0 / 25.4; \
- 	       if ($$4 == "in") factor = 72.0; \
- 	       printf("    { \"%s\", %5f, %5f },\n", \
--		      $$1, $$2 * factor, $$3 * factor); }' < $< >> $@
-+		      $$1, $$2 * factor, $$3 * factor); }' < paperspecs >> $@
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
- # Otherwise a system limit (for SysV at least) may be exceeded.
- .NOEXPORT:

Copied: trunk/dports/print/libpaper/files/patch-Makefile.in.diff (from rev 43821, trunk/dports/print/libpaper/files/patch-Makefile.in)
===================================================================
--- trunk/dports/print/libpaper/files/patch-Makefile.in.diff	                        (rev 0)
+++ trunk/dports/print/libpaper/files/patch-Makefile.in.diff	2008-12-15 21:05:07 UTC (rev 43832)
@@ -0,0 +1,11 @@
+--- lib/Makefile.in.sav	Tue Feb 22 10:19:05 2005
++++ lib/Makefile.in	Tue Feb 22 10:20:05 2005
+@@ -543,7 +543,7 @@
+ 	       if ($$4 == "mm") factor = 72.0 / 25.4; \
+ 	       if ($$4 == "in") factor = 72.0; \
+ 	       printf("    { \"%s\", %5f, %5f },\n", \
+-		      $$1, $$2 * factor, $$3 * factor); }' < $< >> $@
++		      $$1, $$2 * factor, $$3 * factor); }' < paperspecs >> $@
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+ .NOEXPORT:


Property changes on: trunk/dports/print/libpaper/files/patch-Makefile.in.diff
___________________________________________________________________
Added: svn:mergeinfo
   + 

Deleted: trunk/dports/print/libpaper/files/patch-config.guess
===================================================================
--- trunk/dports/print/libpaper/files/patch-config.guess	2008-12-15 21:03:03 UTC (rev 43831)
+++ trunk/dports/print/libpaper/files/patch-config.guess	2008-12-15 21:05:07 UTC (rev 43832)
@@ -1,1391 +0,0 @@
---- config.guess.sav	Tue Feb 22 10:01:57 2005
-+++ config.guess	Tue Feb 22 10:00:41 2005
-@@ -0,0 +1,1388 @@
-+#! /bin/sh
-+# Attempt to guess a canonical system name.
-+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-+#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-+
-+timestamp='2003-02-22'
-+
-+# This file is free software; you can redistribute it and/or modify it
-+# under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# Originally written by Per Bothner <per at bothner.com>.
-+# Please send patches to <config-patches at gnu.org>.  Submit a context
-+# diff and a properly formatted ChangeLog entry.
-+#
-+# This script attempts to guess a canonical system name similar to
-+# config.sub.  If it succeeds, it prints the system name on stdout, and
-+# exits with 0.  Otherwise, it exits with 1.
-+#
-+# The plan is that this can be called by configure scripts if you
-+# don't specify an explicit build system type.
-+
-+me=`echo "$0" | sed -e 's,.*/,,'`
-+
-+usage="\
-+Usage: $0 [OPTION]
-+
-+Output the configuration name of the system \`$me' is run on.
-+
-+Operation modes:
-+  -h, --help         print this help, then exit
-+  -t, --time-stamp   print date of last modification, then exit
-+  -v, --version      print version number, then exit
-+
-+Report bugs and patches to <config-patches at gnu.org>."
-+
-+version="\
-+GNU config.guess ($timestamp)
-+
-+Originally written by Per Bothner.
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-+Free Software Foundation, Inc.
-+
-+This is free software; see the source for copying conditions.  There is NO
-+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-+
-+help="
-+Try \`$me --help' for more information."
-+
-+# Parse command line
-+while test $# -gt 0 ; do
-+  case $1 in
-+    --time-stamp | --time* | -t )
-+       echo "$timestamp" ; exit 0 ;;
-+    --version | -v )
-+       echo "$version" ; exit 0 ;;
-+    --help | --h* | -h )
-+       echo "$usage"; exit 0 ;;
-+    -- )     # Stop option processing
-+       shift; break ;;
-+    - )	# Use stdin as input.
-+       break ;;
-+    -* )
-+       echo "$me: invalid option $1$help" >&2
-+       exit 1 ;;
-+    * )
-+       break ;;
-+  esac
-+done
-+
-+if test $# != 0; then
-+  echo "$me: too many arguments$help" >&2
-+  exit 1
-+fi
-+
-+trap 'exit 1' 1 2 15
-+
-+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-+# compiler to aid in system detection is discouraged as it requires
-+# temporary files to be created and, as you can see below, it is a
-+# headache to deal with in a portable fashion.
-+
-+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-+# use `HOST_CC' if defined, but it is deprecated.
-+
-+# Portable tmp directory creation inspired by the Autoconf team.
-+
-+set_cc_for_build='
-+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-+: ${TMPDIR=/tmp} ;
-+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
-+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
-+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-+dummy=$tmp/dummy ;
-+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-+case $CC_FOR_BUILD,$HOST_CC,$CC in
-+ ,,)    echo "int x;" > $dummy.c ;
-+	for c in cc gcc c89 c99 ; do
-+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-+	     CC_FOR_BUILD="$c"; break ;
-+	  fi ;
-+	done ;
-+	if test x"$CC_FOR_BUILD" = x ; then
-+	  CC_FOR_BUILD=no_compiler_found ;
-+	fi
-+	;;
-+ ,,*)   CC_FOR_BUILD=$CC ;;
-+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-+esac ;'
-+
-+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-+# (ghazi at noc.rutgers.edu 1994-08-24)
-+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-+	PATH=$PATH:/.attbin ; export PATH
-+fi
-+
-+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-+
-+# Note: order is significant - the case branches are not exclusive.
-+
-+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-+    *:NetBSD:*:*)
-+	# NetBSD (nbsd) targets should (where applicable) match one or
-+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-+	# switched to ELF, *-*-netbsd* would select the old
-+	# object file format.  This provides both forward
-+	# compatibility and a consistent mechanism for selecting the
-+	# object file format.
-+	#
-+	# Note: NetBSD doesn't particularly care about the vendor
-+	# portion of the name.  We always set it to "unknown".
-+	sysctl="sysctl -n hw.machine_arch"
-+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-+	case "${UNAME_MACHINE_ARCH}" in
-+	    armeb) machine=armeb-unknown ;;
-+	    arm*) machine=arm-unknown ;;
-+	    sh3el) machine=shl-unknown ;;
-+	    sh3eb) machine=sh-unknown ;;
-+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-+	esac
-+	# The Operating System including object format, if it has switched
-+	# to ELF recently, or will in the future.
-+	case "${UNAME_MACHINE_ARCH}" in
-+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-+		eval $set_cc_for_build
-+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-+			| grep __ELF__ >/dev/null
-+		then
-+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-+		    # Return netbsd for either.  FIX?
-+		    os=netbsd
-+		else
-+		    os=netbsdelf
-+		fi
-+		;;
-+	    *)
-+	        os=netbsd
-+		;;
-+	esac
-+	# The OS release
-+	# Debian GNU/NetBSD machines have a different userland, and
-+	# thus, need a distinct triplet. However, they do not need
-+	# kernel version information, so it can be replaced with a
-+	# suitable tag, in the style of linux-gnu.
-+	case "${UNAME_VERSION}" in
-+	    Debian*)
-+		release='-gnu'
-+		;;
-+	    *)
-+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-+		;;
-+	esac
-+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-+	# contains redundant information, the shorter form:
-+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-+	echo "${machine}-${os}${release}"
-+	exit 0 ;;
-+    amiga:OpenBSD:*:*)
-+	echo m68k-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    arc:OpenBSD:*:*)
-+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    hp300:OpenBSD:*:*)
-+	echo m68k-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    mac68k:OpenBSD:*:*)
-+	echo m68k-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    macppc:OpenBSD:*:*)
-+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    mvme68k:OpenBSD:*:*)
-+	echo m68k-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    mvme88k:OpenBSD:*:*)
-+	echo m88k-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    mvmeppc:OpenBSD:*:*)
-+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    pmax:OpenBSD:*:*)
-+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    sgi:OpenBSD:*:*)
-+	echo mipseb-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    sun3:OpenBSD:*:*)
-+	echo m68k-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    wgrisc:OpenBSD:*:*)
-+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:OpenBSD:*:*)
-+	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-+	exit 0 ;;
-+    alpha:OSF1:*:*)
-+	if test $UNAME_RELEASE = "V4.0"; then
-+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-+	fi
-+	# According to Compaq, /usr/sbin/psrinfo has been available on
-+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-+	# covers most systems running today.  This code pipes the CPU
-+	# types through head -n 1, so we only detect the type of CPU 0.
-+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-+	case "$ALPHA_CPU_TYPE" in
-+	    "EV4 (21064)")
-+		UNAME_MACHINE="alpha" ;;
-+	    "EV4.5 (21064)")
-+		UNAME_MACHINE="alpha" ;;
-+	    "LCA4 (21066/21068)")
-+		UNAME_MACHINE="alpha" ;;
-+	    "EV5 (21164)")
-+		UNAME_MACHINE="alphaev5" ;;
-+	    "EV5.6 (21164A)")
-+		UNAME_MACHINE="alphaev56" ;;
-+	    "EV5.6 (21164PC)")
-+		UNAME_MACHINE="alphapca56" ;;
-+	    "EV5.7 (21164PC)")
-+		UNAME_MACHINE="alphapca57" ;;
-+	    "EV6 (21264)")
-+		UNAME_MACHINE="alphaev6" ;;
-+	    "EV6.7 (21264A)")
-+		UNAME_MACHINE="alphaev67" ;;
-+	    "EV6.8CB (21264C)")
-+		UNAME_MACHINE="alphaev68" ;;
-+	    "EV6.8AL (21264B)")
-+		UNAME_MACHINE="alphaev68" ;;
-+	    "EV6.8CX (21264D)")
-+		UNAME_MACHINE="alphaev68" ;;
-+	    "EV6.9A (21264/EV69A)")
-+		UNAME_MACHINE="alphaev69" ;;
-+	    "EV7 (21364)")
-+		UNAME_MACHINE="alphaev7" ;;
-+	    "EV7.9 (21364A)")
-+		UNAME_MACHINE="alphaev79" ;;
-+	esac
-+	# A Vn.n version is a released version.
-+	# A Tn.n version is a released field test version.
-+	# A Xn.n version is an unreleased experimental baselevel.
-+	# 1.2 uses "1.2" for uname -r.
-+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-+	exit 0 ;;
-+    Alpha\ *:Windows_NT*:*)
-+	# How do we know it's Interix rather than the generic POSIX subsystem?
-+	# Should we change UNAME_MACHINE based on the output of uname instead
-+	# of the specific Alpha model?
-+	echo alpha-pc-interix
-+	exit 0 ;;
-+    21064:Windows_NT:50:3)
-+	echo alpha-dec-winnt3.5
-+	exit 0 ;;
-+    Amiga*:UNIX_System_V:4.0:*)
-+	echo m68k-unknown-sysv4
-+	exit 0;;
-+    *:[Aa]miga[Oo][Ss]:*:*)
-+	echo ${UNAME_MACHINE}-unknown-amigaos
-+	exit 0 ;;
-+    *:[Mm]orph[Oo][Ss]:*:*)
-+	echo ${UNAME_MACHINE}-unknown-morphos
-+	exit 0 ;;
-+    *:OS/390:*:*)
-+	echo i370-ibm-openedition
-+	exit 0 ;;
-+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-+	echo arm-acorn-riscix${UNAME_RELEASE}
-+	exit 0;;
-+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-+	echo hppa1.1-hitachi-hiuxmpp
-+	exit 0;;
-+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-+	# akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-+		echo pyramid-pyramid-sysv3
-+	else
-+		echo pyramid-pyramid-bsd
-+	fi
-+	exit 0 ;;
-+    NILE*:*:*:dcosx)
-+	echo pyramid-pyramid-svr4
-+	exit 0 ;;
-+    DRS?6000:UNIX_SV:4.2*:7*)
-+	case `/usr/bin/uname -p` in
-+	    sparc) echo sparc-icl-nx7 && exit 0 ;;
-+	esac ;;
-+    sun4H:SunOS:5.*:*)
-+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit 0 ;;
-+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit 0 ;;
-+    i86pc:SunOS:5.*:*)
-+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit 0 ;;
-+    sun4*:SunOS:6*:*)
-+	# According to config.sub, this is the proper way to canonicalize
-+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-+	# it's likely to be more like Solaris than SunOS4.
-+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit 0 ;;
-+    sun4*:SunOS:*:*)
-+	case "`/usr/bin/arch -k`" in
-+	    Series*|S4*)
-+		UNAME_RELEASE=`uname -v`
-+		;;
-+	esac
-+	# Japanese Language versions have a version number like `4.1.3-JL'.
-+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-+	exit 0 ;;
-+    sun3*:SunOS:*:*)
-+	echo m68k-sun-sunos${UNAME_RELEASE}
-+	exit 0 ;;
-+    sun*:*:4.2BSD:*)
-+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-+	case "`/bin/arch`" in
-+	    sun3)
-+		echo m68k-sun-sunos${UNAME_RELEASE}
-+		;;
-+	    sun4)
-+		echo sparc-sun-sunos${UNAME_RELEASE}
-+		;;
-+	esac
-+	exit 0 ;;
-+    aushp:SunOS:*:*)
-+	echo sparc-auspex-sunos${UNAME_RELEASE}
-+	exit 0 ;;
-+    # The situation for MiNT is a little confusing.  The machine name
-+    # can be virtually everything (everything which is not
-+    # "atarist" or "atariste" at least should have a processor
-+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-+    # to the lowercase version "mint" (or "freemint").  Finally
-+    # the system name "TOS" denotes a system which is actually not
-+    # MiNT.  But MiNT is downward compatible to TOS, so this should
-+    # be no problem.
-+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-+        echo m68k-atari-mint${UNAME_RELEASE}
-+	exit 0 ;;
-+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-+	echo m68k-atari-mint${UNAME_RELEASE}
-+        exit 0 ;;
-+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-+        echo m68k-atari-mint${UNAME_RELEASE}
-+	exit 0 ;;
-+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-+        echo m68k-milan-mint${UNAME_RELEASE}
-+        exit 0 ;;
-+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-+        echo m68k-hades-mint${UNAME_RELEASE}
-+        exit 0 ;;
-+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-+        echo m68k-unknown-mint${UNAME_RELEASE}
-+        exit 0 ;;
-+    powerpc:machten:*:*)
-+	echo powerpc-apple-machten${UNAME_RELEASE}
-+	exit 0 ;;
-+    RISC*:Mach:*:*)
-+	echo mips-dec-mach_bsd4.3
-+	exit 0 ;;
-+    RISC*:ULTRIX:*:*)
-+	echo mips-dec-ultrix${UNAME_RELEASE}
-+	exit 0 ;;
-+    VAX*:ULTRIX*:*:*)
-+	echo vax-dec-ultrix${UNAME_RELEASE}
-+	exit 0 ;;
-+    2020:CLIX:*:* | 2430:CLIX:*:*)
-+	echo clipper-intergraph-clix${UNAME_RELEASE}
-+	exit 0 ;;
-+    mips:*:*:UMIPS | mips:*:*:RISCos)
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+#ifdef __cplusplus
-+#include <stdio.h>  /* for printf() prototype */
-+	int main (int argc, char *argv[]) {
-+#else
-+	int main (argc, argv) int argc; char *argv[]; {
-+#endif
-+	#if defined (host_mips) && defined (MIPSEB)
-+	#if defined (SYSTYPE_SYSV)
-+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-+	#endif
-+	#if defined (SYSTYPE_SVR4)
-+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-+	#endif
-+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-+	#endif
-+	#endif
-+	  exit (-1);
-+	}
-+EOF
-+	$CC_FOR_BUILD -o $dummy $dummy.c \
-+	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-+	  && exit 0
-+	echo mips-mips-riscos${UNAME_RELEASE}
-+	exit 0 ;;
-+    Motorola:PowerMAX_OS:*:*)
-+	echo powerpc-motorola-powermax
-+	exit 0 ;;
-+    Motorola:*:4.3:PL8-*)
-+	echo powerpc-harris-powermax
-+	exit 0 ;;
-+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-+	echo powerpc-harris-powermax
-+	exit 0 ;;
-+    Night_Hawk:Power_UNIX:*:*)
-+	echo powerpc-harris-powerunix
-+	exit 0 ;;
-+    m88k:CX/UX:7*:*)
-+	echo m88k-harris-cxux7
-+	exit 0 ;;
-+    m88k:*:4*:R4*)
-+	echo m88k-motorola-sysv4
-+	exit 0 ;;
-+    m88k:*:3*:R3*)
-+	echo m88k-motorola-sysv3
-+	exit 0 ;;
-+    AViiON:dgux:*:*)
-+        # DG/UX returns AViiON for all architectures
-+        UNAME_PROCESSOR=`/usr/bin/uname -p`
-+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-+	then
-+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-+	    then
-+		echo m88k-dg-dgux${UNAME_RELEASE}
-+	    else
-+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-+	    fi
-+	else
-+	    echo i586-dg-dgux${UNAME_RELEASE}
-+	fi
-+ 	exit 0 ;;
-+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-+	echo m88k-dolphin-sysv3
-+	exit 0 ;;
-+    M88*:*:R3*:*)
-+	# Delta 88k system running SVR3
-+	echo m88k-motorola-sysv3
-+	exit 0 ;;
-+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-+	echo m88k-tektronix-sysv3
-+	exit 0 ;;
-+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-+	echo m68k-tektronix-bsd
-+	exit 0 ;;
-+    *:IRIX*:*:*)
-+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-+	exit 0 ;;
-+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-+    i*86:AIX:*:*)
-+	echo i386-ibm-aix
-+	exit 0 ;;
-+    ia64:AIX:*:*)
-+	if [ -x /usr/bin/oslevel ] ; then
-+		IBM_REV=`/usr/bin/oslevel`
-+	else
-+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-+	fi
-+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-+	exit 0 ;;
-+    *:AIX:2:3)
-+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-+		eval $set_cc_for_build
-+		sed 's/^		//' << EOF >$dummy.c
-+		#include <sys/systemcfg.h>
-+
-+		main()
-+			{
-+			if (!__power_pc())
-+				exit(1);
-+			puts("powerpc-ibm-aix3.2.5");
-+			exit(0);
-+			}
-+EOF
-+		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
-+		echo rs6000-ibm-aix3.2.5
-+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-+		echo rs6000-ibm-aix3.2.4
-+	else
-+		echo rs6000-ibm-aix3.2
-+	fi
-+	exit 0 ;;
-+    *:AIX:*:[45])
-+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-+		IBM_ARCH=rs6000
-+	else
-+		IBM_ARCH=powerpc
-+	fi
-+	if [ -x /usr/bin/oslevel ] ; then
-+		IBM_REV=`/usr/bin/oslevel`
-+	else
-+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-+	fi
-+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-+	exit 0 ;;
-+    *:AIX:*:*)
-+	echo rs6000-ibm-aix
-+	exit 0 ;;
-+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-+	echo romp-ibm-bsd4.4
-+	exit 0 ;;
-+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-+	exit 0 ;;                           # report: romp-ibm BSD 4.3
-+    *:BOSX:*:*)
-+	echo rs6000-bull-bosx
-+	exit 0 ;;
-+    DPX/2?00:B.O.S.:*:*)
-+	echo m68k-bull-sysv3
-+	exit 0 ;;
-+    9000/[34]??:4.3bsd:1.*:*)
-+	echo m68k-hp-bsd
-+	exit 0 ;;
-+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-+	echo m68k-hp-bsd4.4
-+	exit 0 ;;
-+    9000/[34678]??:HP-UX:*:*)
-+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-+	case "${UNAME_MACHINE}" in
-+	    9000/31? )            HP_ARCH=m68000 ;;
-+	    9000/[34]?? )         HP_ARCH=m68k ;;
-+	    9000/[678][0-9][0-9])
-+		if [ -x /usr/bin/getconf ]; then
-+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-+                    case "${sc_cpu_version}" in
-+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-+                      532)                      # CPU_PA_RISC2_0
-+                        case "${sc_kernel_bits}" in
-+                          32) HP_ARCH="hppa2.0n" ;;
-+                          64) HP_ARCH="hppa2.0w" ;;
-+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-+                        esac ;;
-+                    esac
-+		fi
-+		if [ "${HP_ARCH}" = "" ]; then
-+		    eval $set_cc_for_build
-+		    sed 's/^              //' << EOF >$dummy.c
-+
-+              #define _HPUX_SOURCE
-+              #include <stdlib.h>
-+              #include <unistd.h>
-+
-+              int main ()
-+              {
-+              #if defined(_SC_KERNEL_BITS)
-+                  long bits = sysconf(_SC_KERNEL_BITS);
-+              #endif
-+                  long cpu  = sysconf (_SC_CPU_VERSION);
-+
-+                  switch (cpu)
-+              	{
-+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-+              	case CPU_PA_RISC2_0:
-+              #if defined(_SC_KERNEL_BITS)
-+              	    switch (bits)
-+              		{
-+              		case 64: puts ("hppa2.0w"); break;
-+              		case 32: puts ("hppa2.0n"); break;
-+              		default: puts ("hppa2.0"); break;
-+              		} break;
-+              #else  /* !defined(_SC_KERNEL_BITS) */
-+              	    puts ("hppa2.0"); break;
-+              #endif
-+              	default: puts ("hppa1.0"); break;
-+              	}
-+                  exit (0);
-+              }
-+EOF
-+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-+		    test -z "$HP_ARCH" && HP_ARCH=hppa
-+		fi ;;
-+	esac
-+	if [ ${HP_ARCH} = "hppa2.0w" ]
-+	then
-+	    # avoid double evaluation of $set_cc_for_build
-+	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
-+	    then
-+		HP_ARCH="hppa2.0w"
-+	    else
-+		HP_ARCH="hppa64"
-+	    fi
-+	fi
-+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-+	exit 0 ;;
-+    ia64:HP-UX:*:*)
-+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-+	echo ia64-hp-hpux${HPUX_REV}
-+	exit 0 ;;
-+    3050*:HI-UX:*:*)
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#include <unistd.h>
-+	int
-+	main ()
-+	{
-+	  long cpu = sysconf (_SC_CPU_VERSION);
-+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-+	     results, however.  */
-+	  if (CPU_IS_PA_RISC (cpu))
-+	    {
-+	      switch (cpu)
-+		{
-+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-+		}
-+	    }
-+	  else if (CPU_IS_HP_MC68K (cpu))
-+	    puts ("m68k-hitachi-hiuxwe2");
-+	  else puts ("unknown-hitachi-hiuxwe2");
-+	  exit (0);
-+	}
-+EOF
-+	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
-+	echo unknown-hitachi-hiuxwe2
-+	exit 0 ;;
-+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-+	echo hppa1.1-hp-bsd
-+	exit 0 ;;
-+    9000/8??:4.3bsd:*:*)
-+	echo hppa1.0-hp-bsd
-+	exit 0 ;;
-+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-+	echo hppa1.0-hp-mpeix
-+	exit 0 ;;
-+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-+	echo hppa1.1-hp-osf
-+	exit 0 ;;
-+    hp8??:OSF1:*:*)
-+	echo hppa1.0-hp-osf
-+	exit 0 ;;
-+    i*86:OSF1:*:*)
-+	if [ -x /usr/sbin/sysversion ] ; then
-+	    echo ${UNAME_MACHINE}-unknown-osf1mk
-+	else
-+	    echo ${UNAME_MACHINE}-unknown-osf1
-+	fi
-+	exit 0 ;;
-+    parisc*:Lites*:*:*)
-+	echo hppa1.1-hp-lites
-+	exit 0 ;;
-+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-+	echo c1-convex-bsd
-+        exit 0 ;;
-+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-+	if getsysinfo -f scalar_acc
-+	then echo c32-convex-bsd
-+	else echo c2-convex-bsd
-+	fi
-+        exit 0 ;;
-+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-+	echo c34-convex-bsd
-+        exit 0 ;;
-+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-+	echo c38-convex-bsd
-+        exit 0 ;;
-+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-+	echo c4-convex-bsd
-+        exit 0 ;;
-+    CRAY*Y-MP:*:*:*)
-+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit 0 ;;
-+    CRAY*[A-Z]90:*:*:*)
-+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-+	      -e 's/\.[^.]*$/.X/'
-+	exit 0 ;;
-+    CRAY*TS:*:*:*)
-+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit 0 ;;
-+    CRAY*T3E:*:*:*)
-+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit 0 ;;
-+    CRAY*SV1:*:*:*)
-+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-+	exit 0 ;;
-+    *:UNICOS/mp:*:*)
-+	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' 
-+	exit 0 ;;
-+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-+        exit 0 ;;
-+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-+	exit 0 ;;
-+    sparc*:BSD/OS:*:*)
-+	echo sparc-unknown-bsdi${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:BSD/OS:*:*)
-+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:FreeBSD:*:*)
-+	# Determine whether the default compiler uses glibc.
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#include <features.h>
-+	#if __GLIBC__ >= 2
-+	LIBC=gnu
-+	#else
-+	LIBC=
-+	#endif
-+EOF
-+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
-+	exit 0 ;;
-+    i*:CYGWIN*:*)
-+	echo ${UNAME_MACHINE}-pc-cygwin
-+	exit 0 ;;
-+    i*:MINGW*:*)
-+	echo ${UNAME_MACHINE}-pc-mingw32
-+	exit 0 ;;
-+    i*:PW*:*)
-+	echo ${UNAME_MACHINE}-pc-pw32
-+	exit 0 ;;
-+    x86:Interix*:3*)
-+	echo i586-pc-interix3
-+	exit 0 ;;
-+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-+	echo i${UNAME_MACHINE}-pc-mks
-+	exit 0 ;;
-+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-+	# How do we know it's Interix rather than the generic POSIX subsystem?
-+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-+	# UNAME_MACHINE based on the output of uname instead of i386?
-+	echo i586-pc-interix
-+	exit 0 ;;
-+    i*:UWIN*:*)
-+	echo ${UNAME_MACHINE}-pc-uwin
-+	exit 0 ;;
-+    p*:CYGWIN*:*)
-+	echo powerpcle-unknown-cygwin
-+	exit 0 ;;
-+    prep*:SunOS:5.*:*)
-+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit 0 ;;
-+    *:GNU:*:*)
-+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-+	exit 0 ;;
-+    i*86:Minix:*:*)
-+	echo ${UNAME_MACHINE}-pc-minix
-+	exit 0 ;;
-+    arm*:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit 0 ;;
-+    ia64:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit 0 ;;
-+    m68*:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit 0 ;;
-+    mips:Linux:*:*)
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#undef CPU
-+	#undef mips
-+	#undef mipsel
-+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-+	CPU=mipsel
-+	#else
-+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-+	CPU=mips
-+	#else
-+	CPU=
-+	#endif
-+	#endif
-+EOF
-+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-+	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
-+	;;
-+    mips64:Linux:*:*)
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#undef CPU
-+	#undef mips64
-+	#undef mips64el
-+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-+	CPU=mips64el
-+	#else
-+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-+	CPU=mips64
-+	#else
-+	CPU=
-+	#endif
-+	#endif
-+EOF
-+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-+	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
-+	;;
-+    ppc:Linux:*:*)
-+	echo powerpc-unknown-linux-gnu
-+	exit 0 ;;
-+    ppc64:Linux:*:*)
-+	echo powerpc64-unknown-linux-gnu
-+	exit 0 ;;
-+    alpha:Linux:*:*)
-+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-+	  EV5)   UNAME_MACHINE=alphaev5 ;;
-+	  EV56)  UNAME_MACHINE=alphaev56 ;;
-+	  PCA56) UNAME_MACHINE=alphapca56 ;;
-+	  PCA57) UNAME_MACHINE=alphapca56 ;;
-+	  EV6)   UNAME_MACHINE=alphaev6 ;;
-+	  EV67)  UNAME_MACHINE=alphaev67 ;;
-+	  EV68*) UNAME_MACHINE=alphaev68 ;;
-+        esac
-+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-+	exit 0 ;;
-+    parisc:Linux:*:* | hppa:Linux:*:*)
-+	# Look for CPU level
-+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-+	  *)    echo hppa-unknown-linux-gnu ;;
-+	esac
-+	exit 0 ;;
-+    parisc64:Linux:*:* | hppa64:Linux:*:*)
-+	echo hppa64-unknown-linux-gnu
-+	exit 0 ;;
-+    s390:Linux:*:* | s390x:Linux:*:*)
-+	echo ${UNAME_MACHINE}-ibm-linux
-+	exit 0 ;;
-+    sh*:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit 0 ;;
-+    sparc:Linux:*:* | sparc64:Linux:*:*)
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
-+	exit 0 ;;
-+    x86_64:Linux:*:*)
-+	echo x86_64-unknown-linux-gnu
-+	exit 0 ;;
-+    i*86:Linux:*:*)
-+	# The BFD linker knows what the default object file format is, so
-+	# first see if it will tell us. cd to the root directory to prevent
-+	# problems with other programs or directories called `ld' in the path.
-+	# Set LC_ALL=C to ensure ld outputs messages in English.
-+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-+			 | sed -ne '/supported targets:/!d
-+				    s/[ 	][ 	]*/ /g
-+				    s/.*supported targets: *//
-+				    s/ .*//
-+				    p'`
-+        case "$ld_supported_targets" in
-+	  elf32-i386)
-+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-+		;;
-+	  a.out-i386-linux)
-+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-+		exit 0 ;;
-+	  coff-i386)
-+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-+		exit 0 ;;
-+	  "")
-+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-+		# one that does not give us useful --help.
-+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-+		exit 0 ;;
-+	esac
-+	# Determine whether the default compiler is a.out or elf
-+	eval $set_cc_for_build
-+	sed 's/^	//' << EOF >$dummy.c
-+	#include <features.h>
-+	#ifdef __ELF__
-+	# ifdef __GLIBC__
-+	#  if __GLIBC__ >= 2
-+	LIBC=gnu
-+	#  else
-+	LIBC=gnulibc1
-+	#  endif
-+	# else
-+	LIBC=gnulibc1
-+	# endif
-+	#else
-+	#ifdef __INTEL_COMPILER
-+	LIBC=gnu
-+	#else
-+	LIBC=gnuaout
-+	#endif
-+	#endif
-+EOF
-+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-+	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
-+	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
-+	;;
-+    i*86:DYNIX/ptx:4*:*)
-+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-+	# earlier versions are messed up and put the nodename in both
-+	# sysname and nodename.
-+	echo i386-sequent-sysv4
-+	exit 0 ;;
-+    i*86:UNIX_SV:4.2MP:2.*)
-+        # Unixware is an offshoot of SVR4, but it has its own version
-+        # number series starting with 2...
-+        # I am not positive that other SVR4 systems won't match this,
-+	# I just have to hope.  -- rms.
-+        # Use sysv4.2uw... so that sysv4* matches it.
-+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-+	exit 0 ;;
-+    i*86:OS/2:*:*)
-+	# If we were able to find `uname', then EMX Unix compatibility
-+	# is probably installed.
-+	echo ${UNAME_MACHINE}-pc-os2-emx
-+	exit 0 ;;
-+    i*86:XTS-300:*:STOP)
-+	echo ${UNAME_MACHINE}-unknown-stop
-+	exit 0 ;;
-+    i*86:atheos:*:*)
-+	echo ${UNAME_MACHINE}-unknown-atheos
-+	exit 0 ;;
-+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-+	echo i386-unknown-lynxos${UNAME_RELEASE}
-+	exit 0 ;;
-+    i*86:*DOS:*:*)
-+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-+	exit 0 ;;
-+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-+	else
-+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-+	fi
-+	exit 0 ;;
-+    i*86:*:5:[78]*)
-+	case `/bin/uname -X | grep "^Machine"` in
-+	    *486*)	     UNAME_MACHINE=i486 ;;
-+	    *Pentium)	     UNAME_MACHINE=i586 ;;
-+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-+	esac
-+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-+	exit 0 ;;
-+    i*86:*:3.2:*)
-+	if test -f /usr/options/cb.name; then
-+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-+			&& UNAME_MACHINE=i586
-+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-+			&& UNAME_MACHINE=i686
-+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-+			&& UNAME_MACHINE=i686
-+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-+	else
-+		echo ${UNAME_MACHINE}-pc-sysv32
-+	fi
-+	exit 0 ;;
-+    pc:*:*:*)
-+	# Left here for compatibility:
-+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-+        # the processor, so we play safe by assuming i386.
-+	echo i386-pc-msdosdjgpp
-+        exit 0 ;;
-+    Intel:Mach:3*:*)
-+	echo i386-pc-mach3
-+	exit 0 ;;
-+    paragon:*:*:*)
-+	echo i860-intel-osf1
-+	exit 0 ;;
-+    i860:*:4.*:*) # i860-SVR4
-+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-+	else # Add other i860-SVR4 vendors below as they are discovered.
-+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-+	fi
-+	exit 0 ;;
-+    mini*:CTIX:SYS*5:*)
-+	# "miniframe"
-+	echo m68010-convergent-sysv
-+	exit 0 ;;
-+    mc68k:UNIX:SYSTEM5:3.51m)
-+	echo m68k-convergent-sysv
-+	exit 0 ;;
-+    M680?0:D-NIX:5.3:*)
-+	echo m68k-diab-dnix
-+	exit 0 ;;
-+    M68*:*:R3V[567]*:*)
-+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-+    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0)
-+	OS_REL=''
-+	test -r /etc/.relid \
-+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
-+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
-+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-+          && echo i486-ncr-sysv4 && exit 0 ;;
-+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-+	echo m68k-unknown-lynxos${UNAME_RELEASE}
-+	exit 0 ;;
-+    mc68030:UNIX_System_V:4.*:*)
-+	echo m68k-atari-sysv4
-+	exit 0 ;;
-+    TSUNAMI:LynxOS:2.*:*)
-+	echo sparc-unknown-lynxos${UNAME_RELEASE}
-+	exit 0 ;;
-+    rs6000:LynxOS:2.*:*)
-+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-+	exit 0 ;;
-+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-+	exit 0 ;;
-+    SM[BE]S:UNIX_SV:*:*)
-+	echo mips-dde-sysv${UNAME_RELEASE}
-+	exit 0 ;;
-+    RM*:ReliantUNIX-*:*:*)
-+	echo mips-sni-sysv4
-+	exit 0 ;;
-+    RM*:SINIX-*:*:*)
-+	echo mips-sni-sysv4
-+	exit 0 ;;
-+    *:SINIX-*:*:*)
-+	if uname -p 2>/dev/null >/dev/null ; then
-+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-+		echo ${UNAME_MACHINE}-sni-sysv4
-+	else
-+		echo ns32k-sni-sysv
-+	fi
-+	exit 0 ;;
-+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-+                      # says <Richard.M.Bartel at ccMail.Census.GOV>
-+        echo i586-unisys-sysv4
-+        exit 0 ;;
-+    *:UNIX_System_V:4*:FTX*)
-+	# From Gerald Hewes <hewes at openmarket.com>.
-+	# How about differentiating between stratus architectures? -djm
-+	echo hppa1.1-stratus-sysv4
-+	exit 0 ;;
-+    *:*:*:FTX*)
-+	# From seanf at swdc.stratus.com.
-+	echo i860-stratus-sysv4
-+	exit 0 ;;
-+    *:VOS:*:*)
-+	# From Paul.Green at stratus.com.
-+	echo hppa1.1-stratus-vos
-+	exit 0 ;;
-+    mc68*:A/UX:*:*)
-+	echo m68k-apple-aux${UNAME_RELEASE}
-+	exit 0 ;;
-+    news*:NEWS-OS:6*:*)
-+	echo mips-sony-newsos6
-+	exit 0 ;;
-+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-+	if [ -d /usr/nec ]; then
-+	        echo mips-nec-sysv${UNAME_RELEASE}
-+	else
-+	        echo mips-unknown-sysv${UNAME_RELEASE}
-+	fi
-+        exit 0 ;;
-+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-+	echo powerpc-be-beos
-+	exit 0 ;;
-+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-+	echo powerpc-apple-beos
-+	exit 0 ;;
-+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-+	echo i586-pc-beos
-+	exit 0 ;;
-+    SX-4:SUPER-UX:*:*)
-+	echo sx4-nec-superux${UNAME_RELEASE}
-+	exit 0 ;;
-+    SX-5:SUPER-UX:*:*)
-+	echo sx5-nec-superux${UNAME_RELEASE}
-+	exit 0 ;;
-+    SX-6:SUPER-UX:*:*)
-+	echo sx6-nec-superux${UNAME_RELEASE}
-+	exit 0 ;;
-+    Power*:Rhapsody:*:*)
-+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:Rhapsody:*:*)
-+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:Darwin:*:*)
-+	case `uname -p` in
-+	    *86) UNAME_PROCESSOR=i686 ;;
-+	    powerpc) UNAME_PROCESSOR=powerpc ;;
-+	esac
-+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-+	UNAME_PROCESSOR=`uname -p`
-+	if test "$UNAME_PROCESSOR" = "x86"; then
-+		UNAME_PROCESSOR=i386
-+		UNAME_MACHINE=pc
-+	fi
-+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:QNX:*:4*)
-+	echo i386-pc-qnx
-+	exit 0 ;;
-+    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
-+	echo nsr-tandem-nsk${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:NonStop-UX:*:*)
-+	echo mips-compaq-nonstopux
-+	exit 0 ;;
-+    BS2000:POSIX*:*:*)
-+	echo bs2000-siemens-sysv
-+	exit 0 ;;
-+    DS/*:UNIX_System_V:*:*)
-+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-+	exit 0 ;;
-+    *:Plan9:*:*)
-+	# "uname -m" is not consistent, so use $cputype instead. 386
-+	# is converted to i386 for consistency with other x86
-+	# operating systems.
-+	if test "$cputype" = "386"; then
-+	    UNAME_MACHINE=i386
-+	else
-+	    UNAME_MACHINE="$cputype"
-+	fi
-+	echo ${UNAME_MACHINE}-unknown-plan9
-+	exit 0 ;;
-+    *:TOPS-10:*:*)
-+	echo pdp10-unknown-tops10
-+	exit 0 ;;
-+    *:TENEX:*:*)
-+	echo pdp10-unknown-tenex
-+	exit 0 ;;
-+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-+	echo pdp10-dec-tops20
-+	exit 0 ;;
-+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-+	echo pdp10-xkl-tops20
-+	exit 0 ;;
-+    *:TOPS-20:*:*)
-+	echo pdp10-unknown-tops20
-+	exit 0 ;;
-+    *:ITS:*:*)
-+	echo pdp10-unknown-its
-+	exit 0 ;;
-+esac
-+
-+#echo '(No uname command or uname output not recognized.)' 1>&2
-+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-+
-+eval $set_cc_for_build
-+cat >$dummy.c <<EOF
-+#ifdef _SEQUENT_
-+# include <sys/types.h>
-+# include <sys/utsname.h>
-+#endif
-+main ()
-+{
-+#if defined (sony)
-+#if defined (MIPSEB)
-+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-+     I don't know....  */
-+  printf ("mips-sony-bsd\n"); exit (0);
-+#else
-+#include <sys/param.h>
-+  printf ("m68k-sony-newsos%s\n",
-+#ifdef NEWSOS4
-+          "4"
-+#else
-+	  ""
-+#endif
-+         ); exit (0);
-+#endif
-+#endif
-+
-+#if defined (__arm) && defined (__acorn) && defined (__unix)
-+  printf ("arm-acorn-riscix"); exit (0);
-+#endif
-+
-+#if defined (hp300) && !defined (hpux)
-+  printf ("m68k-hp-bsd\n"); exit (0);
-+#endif
-+
-+#if defined (NeXT)
-+#if !defined (__ARCHITECTURE__)
-+#define __ARCHITECTURE__ "m68k"
-+#endif
-+  int version;
-+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-+  if (version < 4)
-+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-+  else
-+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-+  exit (0);
-+#endif
-+
-+#if defined (MULTIMAX) || defined (n16)
-+#if defined (UMAXV)
-+  printf ("ns32k-encore-sysv\n"); exit (0);
-+#else
-+#if defined (CMU)
-+  printf ("ns32k-encore-mach\n"); exit (0);
-+#else
-+  printf ("ns32k-encore-bsd\n"); exit (0);
-+#endif
-+#endif
-+#endif
-+
-+#if defined (__386BSD__)
-+  printf ("i386-pc-bsd\n"); exit (0);
-+#endif
-+
-+#if defined (sequent)
-+#if defined (i386)
-+  printf ("i386-sequent-dynix\n"); exit (0);
-+#endif
-+#if defined (ns32000)
-+  printf ("ns32k-sequent-dynix\n"); exit (0);
-+#endif
-+#endif
-+
-+#if defined (_SEQUENT_)
-+    struct utsname un;
-+
-+    uname(&un);
-+
-+    if (strncmp(un.version, "V2", 2) == 0) {
-+	printf ("i386-sequent-ptx2\n"); exit (0);
-+    }
-+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-+	printf ("i386-sequent-ptx1\n"); exit (0);
-+    }
-+    printf ("i386-sequent-ptx\n"); exit (0);
-+
-+#endif
-+
-+#if defined (vax)
-+# if !defined (ultrix)
-+#  include <sys/param.h>
-+#  if defined (BSD)
-+#   if BSD == 43
-+      printf ("vax-dec-bsd4.3\n"); exit (0);
-+#   else
-+#    if BSD == 199006
-+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-+#    else
-+      printf ("vax-dec-bsd\n"); exit (0);
-+#    endif
-+#   endif
-+#  else
-+    printf ("vax-dec-bsd\n"); exit (0);
-+#  endif
-+# else
-+    printf ("vax-dec-ultrix\n"); exit (0);
-+# endif
-+#endif
-+
-+#if defined (alliant) && defined (i860)
-+  printf ("i860-alliant-bsd\n"); exit (0);
-+#endif
-+
-+  exit (1);
-+}
-+EOF
-+
-+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
-+
-+# Apollos put the system type in the environment.
-+
-+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-+
-+# Convex versions that predate uname can use getsysinfo(1)
-+
-+if [ -x /usr/convex/getsysinfo ]
-+then
-+    case `getsysinfo -f cpu_type` in
-+    c1*)
-+	echo c1-convex-bsd
-+	exit 0 ;;
-+    c2*)
-+	if getsysinfo -f scalar_acc
-+	then echo c32-convex-bsd
-+	else echo c2-convex-bsd
-+	fi
-+	exit 0 ;;
-+    c34*)
-+	echo c34-convex-bsd
-+	exit 0 ;;
-+    c38*)
-+	echo c38-convex-bsd
-+	exit 0 ;;
-+    c4*)
-+	echo c4-convex-bsd
-+	exit 0 ;;
-+    esac
-+fi
-+
-+cat >&2 <<EOF
-+$0: unable to guess system type
-+
-+This script, last modified $timestamp, has failed to recognize
-+the operating system you are using. It is advised that you
-+download the most up to date version of the config scripts from
-+
-+    ftp://ftp.gnu.org/pub/gnu/config/
-+
-+If the version you run ($0) is already up to date, please
-+send the following data and any information you think might be
-+pertinent to <config-patches at gnu.org> in order to provide the needed
-+information to handle your system.
-+
-+config.guess timestamp = $timestamp
-+
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-+
-+hostinfo               = `(hostinfo) 2>/dev/null`
-+/bin/universe          = `(/bin/universe) 2>/dev/null`
-+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-+/bin/arch              = `(/bin/arch) 2>/dev/null`
-+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-+
-+UNAME_MACHINE = ${UNAME_MACHINE}
-+UNAME_RELEASE = ${UNAME_RELEASE}
-+UNAME_SYSTEM  = ${UNAME_SYSTEM}
-+UNAME_VERSION = ${UNAME_VERSION}
-+EOF
-+
-+exit 1
-+
-+# Local variables:
-+# eval: (add-hook 'write-file-hooks 'time-stamp)
-+# time-stamp-start: "timestamp='"
-+# time-stamp-format: "%:y-%02m-%02d"
-+# time-stamp-end: "'"
-+# End:

Copied: trunk/dports/print/libpaper/files/patch-config.guess.diff (from rev 43821, trunk/dports/print/libpaper/files/patch-config.guess)
===================================================================
--- trunk/dports/print/libpaper/files/patch-config.guess.diff	                        (rev 0)
+++ trunk/dports/print/libpaper/files/patch-config.guess.diff	2008-12-15 21:05:07 UTC (rev 43832)
@@ -0,0 +1,1391 @@
+--- config.guess.sav	Tue Feb 22 10:01:57 2005
++++ config.guess	Tue Feb 22 10:00:41 2005
+@@ -0,0 +1,1388 @@
++#! /bin/sh
++# Attempt to guess a canonical system name.
++#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
++
++timestamp='2003-02-22'
++
++# This file is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Originally written by Per Bothner <per at bothner.com>.
++# Please send patches to <config-patches at gnu.org>.  Submit a context
++# diff and a properly formatted ChangeLog entry.
++#
++# This script attempts to guess a canonical system name similar to
++# config.sub.  If it succeeds, it prints the system name on stdout, and
++# exits with 0.  Otherwise, it exits with 1.
++#
++# The plan is that this can be called by configure scripts if you
++# don't specify an explicit build system type.
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION]
++
++Output the configuration name of the system \`$me' is run on.
++
++Operation modes:
++  -h, --help         print this help, then exit
++  -t, --time-stamp   print date of last modification, then exit
++  -v, --version      print version number, then exit
++
++Report bugs and patches to <config-patches at gnu.org>."
++
++version="\
++GNU config.guess ($timestamp)
++
++Originally written by Per Bothner.
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
++Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions.  There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++  case $1 in
++    --time-stamp | --time* | -t )
++       echo "$timestamp" ; exit 0 ;;
++    --version | -v )
++       echo "$version" ; exit 0 ;;
++    --help | --h* | -h )
++       echo "$usage"; exit 0 ;;
++    -- )     # Stop option processing
++       shift; break ;;
++    - )	# Use stdin as input.
++       break ;;
++    -* )
++       echo "$me: invalid option $1$help" >&2
++       exit 1 ;;
++    * )
++       break ;;
++  esac
++done
++
++if test $# != 0; then
++  echo "$me: too many arguments$help" >&2
++  exit 1
++fi
++
++trap 'exit 1' 1 2 15
++
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
++
++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
++# use `HOST_CC' if defined, but it is deprecated.
++
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
++case $CC_FOR_BUILD,$HOST_CC,$CC in
++ ,,)    echo "int x;" > $dummy.c ;
++	for c in cc gcc c89 c99 ; do
++	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
++	     CC_FOR_BUILD="$c"; break ;
++	  fi ;
++	done ;
++	if test x"$CC_FOR_BUILD" = x ; then
++	  CC_FOR_BUILD=no_compiler_found ;
++	fi
++	;;
++ ,,*)   CC_FOR_BUILD=$CC ;;
++ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
++esac ;'
++
++# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
++# (ghazi at noc.rutgers.edu 1994-08-24)
++if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
++	PATH=$PATH:/.attbin ; export PATH
++fi
++
++UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
++UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
++UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
++UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
++
++# Note: order is significant - the case branches are not exclusive.
++
++case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
++    *:NetBSD:*:*)
++	# NetBSD (nbsd) targets should (where applicable) match one or
++	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
++	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
++	# switched to ELF, *-*-netbsd* would select the old
++	# object file format.  This provides both forward
++	# compatibility and a consistent mechanism for selecting the
++	# object file format.
++	#
++	# Note: NetBSD doesn't particularly care about the vendor
++	# portion of the name.  We always set it to "unknown".
++	sysctl="sysctl -n hw.machine_arch"
++	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
++	case "${UNAME_MACHINE_ARCH}" in
++	    armeb) machine=armeb-unknown ;;
++	    arm*) machine=arm-unknown ;;
++	    sh3el) machine=shl-unknown ;;
++	    sh3eb) machine=sh-unknown ;;
++	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
++	esac
++	# The Operating System including object format, if it has switched
++	# to ELF recently, or will in the future.
++	case "${UNAME_MACHINE_ARCH}" in
++	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++		eval $set_cc_for_build
++		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
++			| grep __ELF__ >/dev/null
++		then
++		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
++		    # Return netbsd for either.  FIX?
++		    os=netbsd
++		else
++		    os=netbsdelf
++		fi
++		;;
++	    *)
++	        os=netbsd
++		;;
++	esac
++	# The OS release
++	# Debian GNU/NetBSD machines have a different userland, and
++	# thus, need a distinct triplet. However, they do not need
++	# kernel version information, so it can be replaced with a
++	# suitable tag, in the style of linux-gnu.
++	case "${UNAME_VERSION}" in
++	    Debian*)
++		release='-gnu'
++		;;
++	    *)
++		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++		;;
++	esac
++	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
++	# contains redundant information, the shorter form:
++	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
++	echo "${machine}-${os}${release}"
++	exit 0 ;;
++    amiga:OpenBSD:*:*)
++	echo m68k-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    arc:OpenBSD:*:*)
++	echo mipsel-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    hp300:OpenBSD:*:*)
++	echo m68k-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    mac68k:OpenBSD:*:*)
++	echo m68k-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    macppc:OpenBSD:*:*)
++	echo powerpc-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    mvme68k:OpenBSD:*:*)
++	echo m68k-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    mvme88k:OpenBSD:*:*)
++	echo m88k-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    mvmeppc:OpenBSD:*:*)
++	echo powerpc-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    pmax:OpenBSD:*:*)
++	echo mipsel-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    sgi:OpenBSD:*:*)
++	echo mipseb-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    sun3:OpenBSD:*:*)
++	echo m68k-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    wgrisc:OpenBSD:*:*)
++	echo mipsel-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    *:OpenBSD:*:*)
++	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
++	exit 0 ;;
++    alpha:OSF1:*:*)
++	if test $UNAME_RELEASE = "V4.0"; then
++		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
++	fi
++	# According to Compaq, /usr/sbin/psrinfo has been available on
++	# OSF/1 and Tru64 systems produced since 1995.  I hope that
++	# covers most systems running today.  This code pipes the CPU
++	# types through head -n 1, so we only detect the type of CPU 0.
++	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++	case "$ALPHA_CPU_TYPE" in
++	    "EV4 (21064)")
++		UNAME_MACHINE="alpha" ;;
++	    "EV4.5 (21064)")
++		UNAME_MACHINE="alpha" ;;
++	    "LCA4 (21066/21068)")
++		UNAME_MACHINE="alpha" ;;
++	    "EV5 (21164)")
++		UNAME_MACHINE="alphaev5" ;;
++	    "EV5.6 (21164A)")
++		UNAME_MACHINE="alphaev56" ;;
++	    "EV5.6 (21164PC)")
++		UNAME_MACHINE="alphapca56" ;;
++	    "EV5.7 (21164PC)")
++		UNAME_MACHINE="alphapca57" ;;
++	    "EV6 (21264)")
++		UNAME_MACHINE="alphaev6" ;;
++	    "EV6.7 (21264A)")
++		UNAME_MACHINE="alphaev67" ;;
++	    "EV6.8CB (21264C)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.8AL (21264B)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.8CX (21264D)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.9A (21264/EV69A)")
++		UNAME_MACHINE="alphaev69" ;;
++	    "EV7 (21364)")
++		UNAME_MACHINE="alphaev7" ;;
++	    "EV7.9 (21364A)")
++		UNAME_MACHINE="alphaev79" ;;
++	esac
++	# A Vn.n version is a released version.
++	# A Tn.n version is a released field test version.
++	# A Xn.n version is an unreleased experimental baselevel.
++	# 1.2 uses "1.2" for uname -r.
++	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++	exit 0 ;;
++    Alpha\ *:Windows_NT*:*)
++	# How do we know it's Interix rather than the generic POSIX subsystem?
++	# Should we change UNAME_MACHINE based on the output of uname instead
++	# of the specific Alpha model?
++	echo alpha-pc-interix
++	exit 0 ;;
++    21064:Windows_NT:50:3)
++	echo alpha-dec-winnt3.5
++	exit 0 ;;
++    Amiga*:UNIX_System_V:4.0:*)
++	echo m68k-unknown-sysv4
++	exit 0;;
++    *:[Aa]miga[Oo][Ss]:*:*)
++	echo ${UNAME_MACHINE}-unknown-amigaos
++	exit 0 ;;
++    *:[Mm]orph[Oo][Ss]:*:*)
++	echo ${UNAME_MACHINE}-unknown-morphos
++	exit 0 ;;
++    *:OS/390:*:*)
++	echo i370-ibm-openedition
++	exit 0 ;;
++    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
++	echo arm-acorn-riscix${UNAME_RELEASE}
++	exit 0;;
++    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
++	echo hppa1.1-hitachi-hiuxmpp
++	exit 0;;
++    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
++	# akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
++	if test "`(/bin/universe) 2>/dev/null`" = att ; then
++		echo pyramid-pyramid-sysv3
++	else
++		echo pyramid-pyramid-bsd
++	fi
++	exit 0 ;;
++    NILE*:*:*:dcosx)
++	echo pyramid-pyramid-svr4
++	exit 0 ;;
++    DRS?6000:UNIX_SV:4.2*:7*)
++	case `/usr/bin/uname -p` in
++	    sparc) echo sparc-icl-nx7 && exit 0 ;;
++	esac ;;
++    sun4H:SunOS:5.*:*)
++	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit 0 ;;
++    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
++	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit 0 ;;
++    i86pc:SunOS:5.*:*)
++	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit 0 ;;
++    sun4*:SunOS:6*:*)
++	# According to config.sub, this is the proper way to canonicalize
++	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
++	# it's likely to be more like Solaris than SunOS4.
++	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit 0 ;;
++    sun4*:SunOS:*:*)
++	case "`/usr/bin/arch -k`" in
++	    Series*|S4*)
++		UNAME_RELEASE=`uname -v`
++		;;
++	esac
++	# Japanese Language versions have a version number like `4.1.3-JL'.
++	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
++	exit 0 ;;
++    sun3*:SunOS:*:*)
++	echo m68k-sun-sunos${UNAME_RELEASE}
++	exit 0 ;;
++    sun*:*:4.2BSD:*)
++	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
++	case "`/bin/arch`" in
++	    sun3)
++		echo m68k-sun-sunos${UNAME_RELEASE}
++		;;
++	    sun4)
++		echo sparc-sun-sunos${UNAME_RELEASE}
++		;;
++	esac
++	exit 0 ;;
++    aushp:SunOS:*:*)
++	echo sparc-auspex-sunos${UNAME_RELEASE}
++	exit 0 ;;
++    # The situation for MiNT is a little confusing.  The machine name
++    # can be virtually everything (everything which is not
++    # "atarist" or "atariste" at least should have a processor
++    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
++    # to the lowercase version "mint" (or "freemint").  Finally
++    # the system name "TOS" denotes a system which is actually not
++    # MiNT.  But MiNT is downward compatible to TOS, so this should
++    # be no problem.
++    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
++        echo m68k-atari-mint${UNAME_RELEASE}
++	exit 0 ;;
++    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
++	echo m68k-atari-mint${UNAME_RELEASE}
++        exit 0 ;;
++    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
++        echo m68k-atari-mint${UNAME_RELEASE}
++	exit 0 ;;
++    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
++        echo m68k-milan-mint${UNAME_RELEASE}
++        exit 0 ;;
++    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
++        echo m68k-hades-mint${UNAME_RELEASE}
++        exit 0 ;;
++    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
++        echo m68k-unknown-mint${UNAME_RELEASE}
++        exit 0 ;;
++    powerpc:machten:*:*)
++	echo powerpc-apple-machten${UNAME_RELEASE}
++	exit 0 ;;
++    RISC*:Mach:*:*)
++	echo mips-dec-mach_bsd4.3
++	exit 0 ;;
++    RISC*:ULTRIX:*:*)
++	echo mips-dec-ultrix${UNAME_RELEASE}
++	exit 0 ;;
++    VAX*:ULTRIX*:*:*)
++	echo vax-dec-ultrix${UNAME_RELEASE}
++	exit 0 ;;
++    2020:CLIX:*:* | 2430:CLIX:*:*)
++	echo clipper-intergraph-clix${UNAME_RELEASE}
++	exit 0 ;;
++    mips:*:*:UMIPS | mips:*:*:RISCos)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++#ifdef __cplusplus
++#include <stdio.h>  /* for printf() prototype */
++	int main (int argc, char *argv[]) {
++#else
++	int main (argc, argv) int argc; char *argv[]; {
++#endif
++	#if defined (host_mips) && defined (MIPSEB)
++	#if defined (SYSTYPE_SYSV)
++	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
++	#endif
++	#if defined (SYSTYPE_SVR4)
++	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
++	#endif
++	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
++	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
++	#endif
++	#endif
++	  exit (-1);
++	}
++EOF
++	$CC_FOR_BUILD -o $dummy $dummy.c \
++	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
++	  && exit 0
++	echo mips-mips-riscos${UNAME_RELEASE}
++	exit 0 ;;
++    Motorola:PowerMAX_OS:*:*)
++	echo powerpc-motorola-powermax
++	exit 0 ;;
++    Motorola:*:4.3:PL8-*)
++	echo powerpc-harris-powermax
++	exit 0 ;;
++    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++	echo powerpc-harris-powermax
++	exit 0 ;;
++    Night_Hawk:Power_UNIX:*:*)
++	echo powerpc-harris-powerunix
++	exit 0 ;;
++    m88k:CX/UX:7*:*)
++	echo m88k-harris-cxux7
++	exit 0 ;;
++    m88k:*:4*:R4*)
++	echo m88k-motorola-sysv4
++	exit 0 ;;
++    m88k:*:3*:R3*)
++	echo m88k-motorola-sysv3
++	exit 0 ;;
++    AViiON:dgux:*:*)
++        # DG/UX returns AViiON for all architectures
++        UNAME_PROCESSOR=`/usr/bin/uname -p`
++	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
++	then
++	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
++	       [ ${TARGET_BINARY_INTERFACE}x = x ]
++	    then
++		echo m88k-dg-dgux${UNAME_RELEASE}
++	    else
++		echo m88k-dg-dguxbcs${UNAME_RELEASE}
++	    fi
++	else
++	    echo i586-dg-dgux${UNAME_RELEASE}
++	fi
++ 	exit 0 ;;
++    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
++	echo m88k-dolphin-sysv3
++	exit 0 ;;
++    M88*:*:R3*:*)
++	# Delta 88k system running SVR3
++	echo m88k-motorola-sysv3
++	exit 0 ;;
++    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
++	echo m88k-tektronix-sysv3
++	exit 0 ;;
++    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
++	echo m68k-tektronix-bsd
++	exit 0 ;;
++    *:IRIX*:*:*)
++	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
++	exit 0 ;;
++    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
++	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
++	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
++    i*86:AIX:*:*)
++	echo i386-ibm-aix
++	exit 0 ;;
++    ia64:AIX:*:*)
++	if [ -x /usr/bin/oslevel ] ; then
++		IBM_REV=`/usr/bin/oslevel`
++	else
++		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++	fi
++	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
++	exit 0 ;;
++    *:AIX:2:3)
++	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
++		eval $set_cc_for_build
++		sed 's/^		//' << EOF >$dummy.c
++		#include <sys/systemcfg.h>
++
++		main()
++			{
++			if (!__power_pc())
++				exit(1);
++			puts("powerpc-ibm-aix3.2.5");
++			exit(0);
++			}
++EOF
++		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
++		echo rs6000-ibm-aix3.2.5
++	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
++		echo rs6000-ibm-aix3.2.4
++	else
++		echo rs6000-ibm-aix3.2
++	fi
++	exit 0 ;;
++    *:AIX:*:[45])
++	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
++	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
++		IBM_ARCH=rs6000
++	else
++		IBM_ARCH=powerpc
++	fi
++	if [ -x /usr/bin/oslevel ] ; then
++		IBM_REV=`/usr/bin/oslevel`
++	else
++		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++	fi
++	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
++	exit 0 ;;
++    *:AIX:*:*)
++	echo rs6000-ibm-aix
++	exit 0 ;;
++    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
++	echo romp-ibm-bsd4.4
++	exit 0 ;;
++    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
++	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
++	exit 0 ;;                           # report: romp-ibm BSD 4.3
++    *:BOSX:*:*)
++	echo rs6000-bull-bosx
++	exit 0 ;;
++    DPX/2?00:B.O.S.:*:*)
++	echo m68k-bull-sysv3
++	exit 0 ;;
++    9000/[34]??:4.3bsd:1.*:*)
++	echo m68k-hp-bsd
++	exit 0 ;;
++    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
++	echo m68k-hp-bsd4.4
++	exit 0 ;;
++    9000/[34678]??:HP-UX:*:*)
++	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++	case "${UNAME_MACHINE}" in
++	    9000/31? )            HP_ARCH=m68000 ;;
++	    9000/[34]?? )         HP_ARCH=m68k ;;
++	    9000/[678][0-9][0-9])
++		if [ -x /usr/bin/getconf ]; then
++		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
++                    case "${sc_cpu_version}" in
++                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
++                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
++                      532)                      # CPU_PA_RISC2_0
++                        case "${sc_kernel_bits}" in
++                          32) HP_ARCH="hppa2.0n" ;;
++                          64) HP_ARCH="hppa2.0w" ;;
++			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
++                        esac ;;
++                    esac
++		fi
++		if [ "${HP_ARCH}" = "" ]; then
++		    eval $set_cc_for_build
++		    sed 's/^              //' << EOF >$dummy.c
++
++              #define _HPUX_SOURCE
++              #include <stdlib.h>
++              #include <unistd.h>
++
++              int main ()
++              {
++              #if defined(_SC_KERNEL_BITS)
++                  long bits = sysconf(_SC_KERNEL_BITS);
++              #endif
++                  long cpu  = sysconf (_SC_CPU_VERSION);
++
++                  switch (cpu)
++              	{
++              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
++              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
++              	case CPU_PA_RISC2_0:
++              #if defined(_SC_KERNEL_BITS)
++              	    switch (bits)
++              		{
++              		case 64: puts ("hppa2.0w"); break;
++              		case 32: puts ("hppa2.0n"); break;
++              		default: puts ("hppa2.0"); break;
++              		} break;
++              #else  /* !defined(_SC_KERNEL_BITS) */
++              	    puts ("hppa2.0"); break;
++              #endif
++              	default: puts ("hppa1.0"); break;
++              	}
++                  exit (0);
++              }
++EOF
++		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++		    test -z "$HP_ARCH" && HP_ARCH=hppa
++		fi ;;
++	esac
++	if [ ${HP_ARCH} = "hppa2.0w" ]
++	then
++	    # avoid double evaluation of $set_cc_for_build
++	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
++	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
++	    then
++		HP_ARCH="hppa2.0w"
++	    else
++		HP_ARCH="hppa64"
++	    fi
++	fi
++	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
++	exit 0 ;;
++    ia64:HP-UX:*:*)
++	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++	echo ia64-hp-hpux${HPUX_REV}
++	exit 0 ;;
++    3050*:HI-UX:*:*)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#include <unistd.h>
++	int
++	main ()
++	{
++	  long cpu = sysconf (_SC_CPU_VERSION);
++	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
++	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
++	     results, however.  */
++	  if (CPU_IS_PA_RISC (cpu))
++	    {
++	      switch (cpu)
++		{
++		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
++		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
++		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
++		  default: puts ("hppa-hitachi-hiuxwe2"); break;
++		}
++	    }
++	  else if (CPU_IS_HP_MC68K (cpu))
++	    puts ("m68k-hitachi-hiuxwe2");
++	  else puts ("unknown-hitachi-hiuxwe2");
++	  exit (0);
++	}
++EOF
++	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
++	echo unknown-hitachi-hiuxwe2
++	exit 0 ;;
++    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
++	echo hppa1.1-hp-bsd
++	exit 0 ;;
++    9000/8??:4.3bsd:*:*)
++	echo hppa1.0-hp-bsd
++	exit 0 ;;
++    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
++	echo hppa1.0-hp-mpeix
++	exit 0 ;;
++    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
++	echo hppa1.1-hp-osf
++	exit 0 ;;
++    hp8??:OSF1:*:*)
++	echo hppa1.0-hp-osf
++	exit 0 ;;
++    i*86:OSF1:*:*)
++	if [ -x /usr/sbin/sysversion ] ; then
++	    echo ${UNAME_MACHINE}-unknown-osf1mk
++	else
++	    echo ${UNAME_MACHINE}-unknown-osf1
++	fi
++	exit 0 ;;
++    parisc*:Lites*:*:*)
++	echo hppa1.1-hp-lites
++	exit 0 ;;
++    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
++	echo c1-convex-bsd
++        exit 0 ;;
++    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
++	if getsysinfo -f scalar_acc
++	then echo c32-convex-bsd
++	else echo c2-convex-bsd
++	fi
++        exit 0 ;;
++    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
++	echo c34-convex-bsd
++        exit 0 ;;
++    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
++	echo c38-convex-bsd
++        exit 0 ;;
++    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
++	echo c4-convex-bsd
++        exit 0 ;;
++    CRAY*Y-MP:*:*:*)
++	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit 0 ;;
++    CRAY*[A-Z]90:*:*:*)
++	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
++	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
++	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++	      -e 's/\.[^.]*$/.X/'
++	exit 0 ;;
++    CRAY*TS:*:*:*)
++	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit 0 ;;
++    CRAY*T3E:*:*:*)
++	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit 0 ;;
++    CRAY*SV1:*:*:*)
++	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit 0 ;;
++    *:UNICOS/mp:*:*)
++	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' 
++	exit 0 ;;
++    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
++	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
++        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++        exit 0 ;;
++    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
++	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
++	exit 0 ;;
++    sparc*:BSD/OS:*:*)
++	echo sparc-unknown-bsdi${UNAME_RELEASE}
++	exit 0 ;;
++    *:BSD/OS:*:*)
++	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
++	exit 0 ;;
++    *:FreeBSD:*:*)
++	# Determine whether the default compiler uses glibc.
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#include <features.h>
++	#if __GLIBC__ >= 2
++	LIBC=gnu
++	#else
++	LIBC=
++	#endif
++EOF
++	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
++	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
++	exit 0 ;;
++    i*:CYGWIN*:*)
++	echo ${UNAME_MACHINE}-pc-cygwin
++	exit 0 ;;
++    i*:MINGW*:*)
++	echo ${UNAME_MACHINE}-pc-mingw32
++	exit 0 ;;
++    i*:PW*:*)
++	echo ${UNAME_MACHINE}-pc-pw32
++	exit 0 ;;
++    x86:Interix*:3*)
++	echo i586-pc-interix3
++	exit 0 ;;
++    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++	echo i${UNAME_MACHINE}-pc-mks
++	exit 0 ;;
++    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
++	# How do we know it's Interix rather than the generic POSIX subsystem?
++	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
++	# UNAME_MACHINE based on the output of uname instead of i386?
++	echo i586-pc-interix
++	exit 0 ;;
++    i*:UWIN*:*)
++	echo ${UNAME_MACHINE}-pc-uwin
++	exit 0 ;;
++    p*:CYGWIN*:*)
++	echo powerpcle-unknown-cygwin
++	exit 0 ;;
++    prep*:SunOS:5.*:*)
++	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++	exit 0 ;;
++    *:GNU:*:*)
++	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
++	exit 0 ;;
++    i*86:Minix:*:*)
++	echo ${UNAME_MACHINE}-pc-minix
++	exit 0 ;;
++    arm*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit 0 ;;
++    ia64:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit 0 ;;
++    m68*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit 0 ;;
++    mips:Linux:*:*)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#undef CPU
++	#undef mips
++	#undef mipsel
++	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++	CPU=mipsel
++	#else
++	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++	CPU=mips
++	#else
++	CPU=
++	#endif
++	#endif
++EOF
++	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
++	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
++	;;
++    mips64:Linux:*:*)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#undef CPU
++	#undef mips64
++	#undef mips64el
++	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++	CPU=mips64el
++	#else
++	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++	CPU=mips64
++	#else
++	CPU=
++	#endif
++	#endif
++EOF
++	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
++	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
++	;;
++    ppc:Linux:*:*)
++	echo powerpc-unknown-linux-gnu
++	exit 0 ;;
++    ppc64:Linux:*:*)
++	echo powerpc64-unknown-linux-gnu
++	exit 0 ;;
++    alpha:Linux:*:*)
++	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++	  EV5)   UNAME_MACHINE=alphaev5 ;;
++	  EV56)  UNAME_MACHINE=alphaev56 ;;
++	  PCA56) UNAME_MACHINE=alphapca56 ;;
++	  PCA57) UNAME_MACHINE=alphapca56 ;;
++	  EV6)   UNAME_MACHINE=alphaev6 ;;
++	  EV67)  UNAME_MACHINE=alphaev67 ;;
++	  EV68*) UNAME_MACHINE=alphaev68 ;;
++        esac
++	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
++	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
++	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++	exit 0 ;;
++    parisc:Linux:*:* | hppa:Linux:*:*)
++	# Look for CPU level
++	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
++	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
++	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
++	  *)    echo hppa-unknown-linux-gnu ;;
++	esac
++	exit 0 ;;
++    parisc64:Linux:*:* | hppa64:Linux:*:*)
++	echo hppa64-unknown-linux-gnu
++	exit 0 ;;
++    s390:Linux:*:* | s390x:Linux:*:*)
++	echo ${UNAME_MACHINE}-ibm-linux
++	exit 0 ;;
++    sh*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit 0 ;;
++    sparc:Linux:*:* | sparc64:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit 0 ;;
++    x86_64:Linux:*:*)
++	echo x86_64-unknown-linux-gnu
++	exit 0 ;;
++    i*86:Linux:*:*)
++	# The BFD linker knows what the default object file format is, so
++	# first see if it will tell us. cd to the root directory to prevent
++	# problems with other programs or directories called `ld' in the path.
++	# Set LC_ALL=C to ensure ld outputs messages in English.
++	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
++			 | sed -ne '/supported targets:/!d
++				    s/[ 	][ 	]*/ /g
++				    s/.*supported targets: *//
++				    s/ .*//
++				    p'`
++        case "$ld_supported_targets" in
++	  elf32-i386)
++		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
++		;;
++	  a.out-i386-linux)
++		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
++		exit 0 ;;
++	  coff-i386)
++		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
++		exit 0 ;;
++	  "")
++		# Either a pre-BFD a.out linker (linux-gnuoldld) or
++		# one that does not give us useful --help.
++		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
++		exit 0 ;;
++	esac
++	# Determine whether the default compiler is a.out or elf
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#include <features.h>
++	#ifdef __ELF__
++	# ifdef __GLIBC__
++	#  if __GLIBC__ >= 2
++	LIBC=gnu
++	#  else
++	LIBC=gnulibc1
++	#  endif
++	# else
++	LIBC=gnulibc1
++	# endif
++	#else
++	#ifdef __INTEL_COMPILER
++	LIBC=gnu
++	#else
++	LIBC=gnuaout
++	#endif
++	#endif
++EOF
++	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
++	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
++	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
++	;;
++    i*86:DYNIX/ptx:4*:*)
++	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++	# earlier versions are messed up and put the nodename in both
++	# sysname and nodename.
++	echo i386-sequent-sysv4
++	exit 0 ;;
++    i*86:UNIX_SV:4.2MP:2.*)
++        # Unixware is an offshoot of SVR4, but it has its own version
++        # number series starting with 2...
++        # I am not positive that other SVR4 systems won't match this,
++	# I just have to hope.  -- rms.
++        # Use sysv4.2uw... so that sysv4* matches it.
++	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
++	exit 0 ;;
++    i*86:OS/2:*:*)
++	# If we were able to find `uname', then EMX Unix compatibility
++	# is probably installed.
++	echo ${UNAME_MACHINE}-pc-os2-emx
++	exit 0 ;;
++    i*86:XTS-300:*:STOP)
++	echo ${UNAME_MACHINE}-unknown-stop
++	exit 0 ;;
++    i*86:atheos:*:*)
++	echo ${UNAME_MACHINE}-unknown-atheos
++	exit 0 ;;
++    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
++	echo i386-unknown-lynxos${UNAME_RELEASE}
++	exit 0 ;;
++    i*86:*DOS:*:*)
++	echo ${UNAME_MACHINE}-pc-msdosdjgpp
++	exit 0 ;;
++    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
++	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
++	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
++		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
++	else
++		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
++	fi
++	exit 0 ;;
++    i*86:*:5:[78]*)
++	case `/bin/uname -X | grep "^Machine"` in
++	    *486*)	     UNAME_MACHINE=i486 ;;
++	    *Pentium)	     UNAME_MACHINE=i586 ;;
++	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++	esac
++	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
++	exit 0 ;;
++    i*86:*:3.2:*)
++	if test -f /usr/options/cb.name; then
++		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
++		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
++	elif /bin/uname -X 2>/dev/null >/dev/null ; then
++		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
++			&& UNAME_MACHINE=i586
++		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
++			&& UNAME_MACHINE=i686
++		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
++			&& UNAME_MACHINE=i686
++		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
++	else
++		echo ${UNAME_MACHINE}-pc-sysv32
++	fi
++	exit 0 ;;
++    pc:*:*:*)
++	# Left here for compatibility:
++        # uname -m prints for DJGPP always 'pc', but it prints nothing about
++        # the processor, so we play safe by assuming i386.
++	echo i386-pc-msdosdjgpp
++        exit 0 ;;
++    Intel:Mach:3*:*)
++	echo i386-pc-mach3
++	exit 0 ;;
++    paragon:*:*:*)
++	echo i860-intel-osf1
++	exit 0 ;;
++    i860:*:4.*:*) # i860-SVR4
++	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
++	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
++	else # Add other i860-SVR4 vendors below as they are discovered.
++	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
++	fi
++	exit 0 ;;
++    mini*:CTIX:SYS*5:*)
++	# "miniframe"
++	echo m68010-convergent-sysv
++	exit 0 ;;
++    mc68k:UNIX:SYSTEM5:3.51m)
++	echo m68k-convergent-sysv
++	exit 0 ;;
++    M680?0:D-NIX:5.3:*)
++	echo m68k-diab-dnix
++	exit 0 ;;
++    M68*:*:R3V[567]*:*)
++	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
++    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0)
++	OS_REL=''
++	test -r /etc/.relid \
++	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
++	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
++    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
++        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++          && echo i486-ncr-sysv4 && exit 0 ;;
++    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
++	echo m68k-unknown-lynxos${UNAME_RELEASE}
++	exit 0 ;;
++    mc68030:UNIX_System_V:4.*:*)
++	echo m68k-atari-sysv4
++	exit 0 ;;
++    TSUNAMI:LynxOS:2.*:*)
++	echo sparc-unknown-lynxos${UNAME_RELEASE}
++	exit 0 ;;
++    rs6000:LynxOS:2.*:*)
++	echo rs6000-unknown-lynxos${UNAME_RELEASE}
++	exit 0 ;;
++    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
++	echo powerpc-unknown-lynxos${UNAME_RELEASE}
++	exit 0 ;;
++    SM[BE]S:UNIX_SV:*:*)
++	echo mips-dde-sysv${UNAME_RELEASE}
++	exit 0 ;;
++    RM*:ReliantUNIX-*:*:*)
++	echo mips-sni-sysv4
++	exit 0 ;;
++    RM*:SINIX-*:*:*)
++	echo mips-sni-sysv4
++	exit 0 ;;
++    *:SINIX-*:*:*)
++	if uname -p 2>/dev/null >/dev/null ; then
++		UNAME_MACHINE=`(uname -p) 2>/dev/null`
++		echo ${UNAME_MACHINE}-sni-sysv4
++	else
++		echo ns32k-sni-sysv
++	fi
++	exit 0 ;;
++    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++                      # says <Richard.M.Bartel at ccMail.Census.GOV>
++        echo i586-unisys-sysv4
++        exit 0 ;;
++    *:UNIX_System_V:4*:FTX*)
++	# From Gerald Hewes <hewes at openmarket.com>.
++	# How about differentiating between stratus architectures? -djm
++	echo hppa1.1-stratus-sysv4
++	exit 0 ;;
++    *:*:*:FTX*)
++	# From seanf at swdc.stratus.com.
++	echo i860-stratus-sysv4
++	exit 0 ;;
++    *:VOS:*:*)
++	# From Paul.Green at stratus.com.
++	echo hppa1.1-stratus-vos
++	exit 0 ;;
++    mc68*:A/UX:*:*)
++	echo m68k-apple-aux${UNAME_RELEASE}
++	exit 0 ;;
++    news*:NEWS-OS:6*:*)
++	echo mips-sony-newsos6
++	exit 0 ;;
++    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
++	if [ -d /usr/nec ]; then
++	        echo mips-nec-sysv${UNAME_RELEASE}
++	else
++	        echo mips-unknown-sysv${UNAME_RELEASE}
++	fi
++        exit 0 ;;
++    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
++	echo powerpc-be-beos
++	exit 0 ;;
++    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
++	echo powerpc-apple-beos
++	exit 0 ;;
++    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
++	echo i586-pc-beos
++	exit 0 ;;
++    SX-4:SUPER-UX:*:*)
++	echo sx4-nec-superux${UNAME_RELEASE}
++	exit 0 ;;
++    SX-5:SUPER-UX:*:*)
++	echo sx5-nec-superux${UNAME_RELEASE}
++	exit 0 ;;
++    SX-6:SUPER-UX:*:*)
++	echo sx6-nec-superux${UNAME_RELEASE}
++	exit 0 ;;
++    Power*:Rhapsody:*:*)
++	echo powerpc-apple-rhapsody${UNAME_RELEASE}
++	exit 0 ;;
++    *:Rhapsody:*:*)
++	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
++	exit 0 ;;
++    *:Darwin:*:*)
++	case `uname -p` in
++	    *86) UNAME_PROCESSOR=i686 ;;
++	    powerpc) UNAME_PROCESSOR=powerpc ;;
++	esac
++	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
++	exit 0 ;;
++    *:procnto*:*:* | *:QNX:[0123456789]*:*)
++	UNAME_PROCESSOR=`uname -p`
++	if test "$UNAME_PROCESSOR" = "x86"; then
++		UNAME_PROCESSOR=i386
++		UNAME_MACHINE=pc
++	fi
++	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
++	exit 0 ;;
++    *:QNX:*:4*)
++	echo i386-pc-qnx
++	exit 0 ;;
++    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
++	echo nsr-tandem-nsk${UNAME_RELEASE}
++	exit 0 ;;
++    *:NonStop-UX:*:*)
++	echo mips-compaq-nonstopux
++	exit 0 ;;
++    BS2000:POSIX*:*:*)
++	echo bs2000-siemens-sysv
++	exit 0 ;;
++    DS/*:UNIX_System_V:*:*)
++	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
++	exit 0 ;;
++    *:Plan9:*:*)
++	# "uname -m" is not consistent, so use $cputype instead. 386
++	# is converted to i386 for consistency with other x86
++	# operating systems.
++	if test "$cputype" = "386"; then
++	    UNAME_MACHINE=i386
++	else
++	    UNAME_MACHINE="$cputype"
++	fi
++	echo ${UNAME_MACHINE}-unknown-plan9
++	exit 0 ;;
++    *:TOPS-10:*:*)
++	echo pdp10-unknown-tops10
++	exit 0 ;;
++    *:TENEX:*:*)
++	echo pdp10-unknown-tenex
++	exit 0 ;;
++    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
++	echo pdp10-dec-tops20
++	exit 0 ;;
++    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
++	echo pdp10-xkl-tops20
++	exit 0 ;;
++    *:TOPS-20:*:*)
++	echo pdp10-unknown-tops20
++	exit 0 ;;
++    *:ITS:*:*)
++	echo pdp10-unknown-its
++	exit 0 ;;
++esac
++
++#echo '(No uname command or uname output not recognized.)' 1>&2
++#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
++
++eval $set_cc_for_build
++cat >$dummy.c <<EOF
++#ifdef _SEQUENT_
++# include <sys/types.h>
++# include <sys/utsname.h>
++#endif
++main ()
++{
++#if defined (sony)
++#if defined (MIPSEB)
++  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
++     I don't know....  */
++  printf ("mips-sony-bsd\n"); exit (0);
++#else
++#include <sys/param.h>
++  printf ("m68k-sony-newsos%s\n",
++#ifdef NEWSOS4
++          "4"
++#else
++	  ""
++#endif
++         ); exit (0);
++#endif
++#endif
++
++#if defined (__arm) && defined (__acorn) && defined (__unix)
++  printf ("arm-acorn-riscix"); exit (0);
++#endif
++
++#if defined (hp300) && !defined (hpux)
++  printf ("m68k-hp-bsd\n"); exit (0);
++#endif
++
++#if defined (NeXT)
++#if !defined (__ARCHITECTURE__)
++#define __ARCHITECTURE__ "m68k"
++#endif
++  int version;
++  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
++  if (version < 4)
++    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
++  else
++    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
++  exit (0);
++#endif
++
++#if defined (MULTIMAX) || defined (n16)
++#if defined (UMAXV)
++  printf ("ns32k-encore-sysv\n"); exit (0);
++#else
++#if defined (CMU)
++  printf ("ns32k-encore-mach\n"); exit (0);
++#else
++  printf ("ns32k-encore-bsd\n"); exit (0);
++#endif
++#endif
++#endif
++
++#if defined (__386BSD__)
++  printf ("i386-pc-bsd\n"); exit (0);
++#endif
++
++#if defined (sequent)
++#if defined (i386)
++  printf ("i386-sequent-dynix\n"); exit (0);
++#endif
++#if defined (ns32000)
++  printf ("ns32k-sequent-dynix\n"); exit (0);
++#endif
++#endif
++
++#if defined (_SEQUENT_)
++    struct utsname un;
++
++    uname(&un);
++
++    if (strncmp(un.version, "V2", 2) == 0) {
++	printf ("i386-sequent-ptx2\n"); exit (0);
++    }
++    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
++	printf ("i386-sequent-ptx1\n"); exit (0);
++    }
++    printf ("i386-sequent-ptx\n"); exit (0);
++
++#endif
++
++#if defined (vax)
++# if !defined (ultrix)
++#  include <sys/param.h>
++#  if defined (BSD)
++#   if BSD == 43
++      printf ("vax-dec-bsd4.3\n"); exit (0);
++#   else
++#    if BSD == 199006
++      printf ("vax-dec-bsd4.3reno\n"); exit (0);
++#    else
++      printf ("vax-dec-bsd\n"); exit (0);
++#    endif
++#   endif
++#  else
++    printf ("vax-dec-bsd\n"); exit (0);
++#  endif
++# else
++    printf ("vax-dec-ultrix\n"); exit (0);
++# endif
++#endif
++
++#if defined (alliant) && defined (i860)
++  printf ("i860-alliant-bsd\n"); exit (0);
++#endif
++
++  exit (1);
++}
++EOF
++
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
++
++# Apollos put the system type in the environment.
++
++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
++
++# Convex versions that predate uname can use getsysinfo(1)
++
++if [ -x /usr/convex/getsysinfo ]
++then
++    case `getsysinfo -f cpu_type` in
++    c1*)
++	echo c1-convex-bsd
++	exit 0 ;;
++    c2*)
++	if getsysinfo -f scalar_acc
++	then echo c32-convex-bsd
++	else echo c2-convex-bsd
++	fi
++	exit 0 ;;
++    c34*)
++	echo c34-convex-bsd
++	exit 0 ;;
++    c38*)
++	echo c38-convex-bsd
++	exit 0 ;;
++    c4*)
++	echo c4-convex-bsd
++	exit 0 ;;
++    esac
++fi
++
++cat >&2 <<EOF
++$0: unable to guess system type
++
++This script, last modified $timestamp, has failed to recognize
++the operating system you are using. It is advised that you
++download the most up to date version of the config scripts from
++
++    ftp://ftp.gnu.org/pub/gnu/config/
++
++If the version you run ($0) is already up to date, please
++send the following data and any information you think might be
++pertinent to <config-patches at gnu.org> in order to provide the needed
++information to handle your system.
++
++config.guess timestamp = $timestamp
++
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
++/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
++
++hostinfo               = `(hostinfo) 2>/dev/null`
++/bin/universe          = `(/bin/universe) 2>/dev/null`
++/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
++/bin/arch              = `(/bin/arch) 2>/dev/null`
++/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
++
++UNAME_MACHINE = ${UNAME_MACHINE}
++UNAME_RELEASE = ${UNAME_RELEASE}
++UNAME_SYSTEM  = ${UNAME_SYSTEM}
++UNAME_VERSION = ${UNAME_VERSION}
++EOF
++
++exit 1
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:


Property changes on: trunk/dports/print/libpaper/files/patch-config.guess.diff
___________________________________________________________________
Added: svn:mergeinfo
   + 

Deleted: trunk/dports/print/libpaper/files/patch-paper.c
===================================================================
--- trunk/dports/print/libpaper/files/patch-paper.c	2008-12-15 21:03:03 UTC (rev 43831)
+++ trunk/dports/print/libpaper/files/patch-paper.c	2008-12-15 21:05:07 UTC (rev 43832)
@@ -1,10 +0,0 @@
---- lib/paper.c.sav	Tue Feb 22 10:03:44 2005
-+++ lib/paper.c	Tue Feb 22 10:03:55 2005
-@@ -14,7 +14,6 @@
- #include <sys/stat.h>
- 
- #include <stdio.h>
--#include <malloc.h>
- #include <string.h>
- #include <ctype.h>
- 

Copied: trunk/dports/print/libpaper/files/patch-paper.c.diff (from rev 43821, trunk/dports/print/libpaper/files/patch-paper.c)
===================================================================
--- trunk/dports/print/libpaper/files/patch-paper.c.diff	                        (rev 0)
+++ trunk/dports/print/libpaper/files/patch-paper.c.diff	2008-12-15 21:05:07 UTC (rev 43832)
@@ -0,0 +1,10 @@
+--- lib/paper.c.sav	Tue Feb 22 10:03:44 2005
++++ lib/paper.c	Tue Feb 22 10:03:55 2005
+@@ -14,7 +14,6 @@
+ #include <sys/stat.h>
+ 
+ #include <stdio.h>
+-#include <malloc.h>
+ #include <string.h>
+ #include <ctype.h>
+ 


Property changes on: trunk/dports/print/libpaper/files/patch-paper.c.diff
___________________________________________________________________
Added: svn:mergeinfo
   + 

Deleted: trunk/dports/print/libpaper/files/patch-paperconf.c
===================================================================
--- trunk/dports/print/libpaper/files/patch-paperconf.c	2008-12-15 21:03:03 UTC (rev 43831)
+++ trunk/dports/print/libpaper/files/patch-paperconf.c	2008-12-15 21:05:07 UTC (rev 43832)
@@ -1,10 +0,0 @@
---- src/paperconf.c.org	2004-10-23 13:53:15.000000000 +0400
-+++ src/paperconf.c	2005-09-16 23:18:59.000000000 +0400
-@@ -10,6 +10,7 @@
- #include <stdio.h>
- #include <string.h>
- #include <errno.h>
-+#include <stdlib.h>
- 
- #include <paper.h>
- 

Copied: trunk/dports/print/libpaper/files/patch-paperconf.c.diff (from rev 43821, trunk/dports/print/libpaper/files/patch-paperconf.c)
===================================================================
--- trunk/dports/print/libpaper/files/patch-paperconf.c.diff	                        (rev 0)
+++ trunk/dports/print/libpaper/files/patch-paperconf.c.diff	2008-12-15 21:05:07 UTC (rev 43832)
@@ -0,0 +1,10 @@
+--- src/paperconf.c.org	2004-10-23 13:53:15.000000000 +0400
++++ src/paperconf.c	2005-09-16 23:18:59.000000000 +0400
+@@ -10,6 +10,7 @@
+ #include <stdio.h>
+ #include <string.h>
+ #include <errno.h>
++#include <stdlib.h>
+ 
+ #include <paper.h>
+ 


Property changes on: trunk/dports/print/libpaper/files/patch-paperconf.c.diff
___________________________________________________________________
Added: svn:mergeinfo
   + 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20081215/c209bf0b/attachment-0001.html>