[67090] trunk/dports

Wed Apr 28 14:47:51 PDT 2010

Revision: 67090
          http://trac.macports.org/changeset/67090
Author:   portindex at macports.org
Date:     2010-04-28 14:47:48 -0700 (Wed, 28 Apr 2010)
Log Message:
-----------
Total number of ports parsed:	4 
Ports successfully parsed:	4 
Ports failed:			0 
Up-to-date ports skipped:	6844

Modified Paths:
--------------
    trunk/dports/PortIndex
    trunk/dports/PortIndex.quick

Modified: trunk/dports/PortIndex
===================================================================

--- trunk/dports/PortIndex	2010-04-28 21:25:56 UTC (rev 67089)
+++ trunk/dports/PortIndex	2010-04-28 21:47:48 UTC (rev 67090)
@@ -5918,8 +5918,8 @@
 variants universal portdir net/ipv6calc description {A small utility to manipulate (not only) IPv6 addresses.} homepage http://www.deepspace6.net/projects/ipv6calc.html epoch 0 platforms darwin name ipv6calc long_description {ipv6calc is a small utility written in programming languate C to manipulate (not only) IPv6 addresses. Intentions were convering a given IPv6 address into compressed format, convering a given IPv6 address into the same format like shown in /proc/net/if_inet6 and (because it was not difficulty) migrating the Perl program ip6_int into. Now only one utiltity is needed to do a lot.} license unknown maintainers sky.fr:cbellot categories net version 0.71.0 revision 0
 jabber 401
 variants {ssl universal} portdir net/jabber description {Online presence and instant messaging server} epoch 0 platforms darwin name jabber depends_lib {port:libiconv port:expat port:gettext lib:libpth.a:pth} long_description {The Jabber server (jabberd) is a daemon for Jabber clients to connect and communicate with.} license unknown maintainers nomaintainer categories net version 1.4.2 revision 5
-jabberd 534
-variants universal portdir net/jabberd description {Jabber messaging (XMPP) server} homepage http://codex.xiaoka.com/wiki/jabberd2:start epoch 0 platforms darwin name jabberd depends_lib {port:openssl port:expat port:libgcrypt port:libgpg-error port:libgsasl port:gss port:libiconv port:libidn port:gettext port:zlib} long_description {The Jabber server (jabberd) is a daemon for Jabber clients to connect and communicate with using the XMPP protocol.} maintainers nomaintainer license unknown categories net version 2.2.9 revision 0
+jabberd 547
+variants universal portdir net/jabberd description {Jabber messaging (XMPP) server} homepage http://codex.xiaoka.com/wiki/jabberd2:start epoch 0 platforms darwin name jabberd depends_lib {port:openssl port:expat port:libgcrypt port:libgpg-error port:libgsasl port:gss port:libiconv port:libidn port:gettext port:libudns port:zlib} long_description {The Jabber server (jabberd) is a daemon for Jabber clients to connect and communicate with using the XMPP protocol.} maintainers nomaintainer license unknown categories net version 2.2.9 revision 1
 jigdo 422
 variants universal portdir net/jigdo description {A tool designed to ease the distribution of very large files} homepage http://atterer.net/jigdo/ epoch 0 depends_run bin:wget:wget platforms darwin depends_lib {port:libwww port:gtk2 port:libiconv} name jigdo long_description {{A tool designed to ease the distribution of very large files}} maintainers nomaintainer license unknown categories net version 0.7.3 revision 0
 jlj 364
@@ -9863,7 +9863,7 @@
 py26-lint 697
 portdir python/py26-lint description {Error (and style) checking for python} homepage http://www.logilab.org/projects/pylint/ epoch 0 platforms darwin depends_lib {port:py26-logilab-common port:py26-logilab-astng} name py26-lint license unknown maintainers nomaintainer long_description {Pylint is a tool that checks for errors in python code, and tries to check that a given coding standard is respected by the coders. This is similar but nevertheless different from what pychecker_ provides, especially since pychecker explicitely does not bother with coding style. The default coding style used by pylint is close to `Guido's style guide`_.} version 0.20.0 categories {python devel} revision 0
 py26-logilab-astng 589
-portdir python/py26-logilab-astng description {Python Abstract Syntax Tree New Generation} homepage http://www.logilab.org/project/logilab-astng epoch 0 platforms darwin depends_lib {port:python26 port:py26-logilab-common} name py26-logilab-astng license unknown maintainers {dh openmaintainer} long_description {The aim of this module is to provide a common base representation of python source code for projects such as pychecker, pyreverse, pylint... Well, actually the development of this library is essentially governed by pylint's needs.} version 0.19.3 categories python revision 0
+portdir python/py26-logilab-astng description {Python Abstract Syntax Tree New Generation} homepage http://www.logilab.org/project/logilab-astng epoch 0 platforms darwin depends_lib {port:python26 port:py26-logilab-common} name py26-logilab-astng license unknown maintainers {dh openmaintainer} long_description {The aim of this module is to provide a common base representation of python source code for projects such as pychecker, pyreverse, pylint... Well, actually the development of this library is essentially governed by pylint's needs.} version 0.20.0 categories python revision 0
 py26-logilab-common 409
 portdir python/py26-logilab-common description {A number of modules used by various projects from Logilab} homepage http://www.logilab.org/project/logilab-common epoch 0 platforms darwin depends_lib port:python26 name py26-logilab-common license unknown maintainers {dh openmaintainer} long_description {{A number of modules used by various projects from Logilab}} version 0.47.0 categories python revision 0
 py26-lxml 632
@@ -10126,6 +10126,8 @@
 depends_build port:py26-distribute portdir python/py26-routes description {A Routing package for Python that matches URLs to dicts and vice versa.} homepage http://routes.groovie.org epoch 0 platforms darwin depends_lib port:python26 name py26-routes license unknown maintainers {stromnov openmaintainer} long_description {Routes is a Python re-implementation of the Rails routes system for mapping URLs to Controllers/Actions and generating URLs. Routes makes it easy to create pretty and concise URLs that are RESTful with little effort.} version 1.12.1 categories {python www} revision 0
 py26-rpncalc 528
 portdir python/py26-rpncalc description {an interpreter for Reverse Polish Notation (RPN) that easily integrates with the standard Python interpreter} homepage http://calcrpnpy.sourceforge.net/ depends_run port:py26-clnum epoch 0 platforms darwin depends_lib port:python26 name py26-rpncalc license GPL-2 maintainers {ryandesign openmaintainer} long_description {rpncalc is {an interpreter for Reverse Polish Notation (RPN) that easily integrates with the standard Python interpreter.}} version 2.7 categories python revision 0
+py26-rpy2 509
+portdir python/py26-rpy2 description {A simple and efficient access to R from Python} homepage http://rpy.sourceforge.net/rpy2.html epoch 0 platforms darwin depends_lib port:R name py26-rpy2 license unknown maintainers openmaintainer long_description {rpy2 is a redesign and rewrite of rpy. It is providing a low-level interface to R, a proposed high-level interface, including wrappers to graphical libraries, as well as R-like structures and functions.} version 2.1.1 categories {python science} revision 0
 py26-rtree 513
 depends_build port:py26-distribute portdir python/py26-rtree description {R-Tree spatial index for Python GIS} homepage http://trac.gispython.org/lab/wiki/Rtree epoch 0 platforms darwin depends_lib {port:python26 port:spatialindex} name py26-rtree license unknown maintainers {stromnov openmaintainer} long_description {Rtree is a Python library that uses ctypes and an internally built C API to wrap libspatialindex and provide very flexible spatial indexing.} version 0.6.0 categories {python devel} revision 0
 py26-scientific 440

Modified: trunk/dports/PortIndex.quick
===================================================================
(Binary files differ)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20100428/266296ac/attachment.html>
