[106796] trunk/base/doc/macports.conf.in
larryv at macports.org
larryv at macports.org
Sat Jun 8 09:05:04 PDT 2013
Revision: 106796
https://trac.macports.org/changeset/106796
Author: larryv at macports.org
Date: 2013-06-08 09:05:03 -0700 (Sat, 08 Jun 2013)
Log Message:
-----------
macports.conf.in: Add tabs to ensure alignment; remove overly-fussy editor config.
Modified Paths:
--------------
trunk/base/doc/macports.conf.in
Modified: trunk/base/doc/macports.conf.in
===================================================================
--- trunk/base/doc/macports.conf.in 2013-06-08 15:28:13 UTC (rev 106795)
+++ trunk/base/doc/macports.conf.in 2013-06-08 16:05:03 UTC (rev 106796)
@@ -1,4 +1,3 @@
-# -*- coding: utf-8; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:et:sw=4:ts=8:sts=4
# $Id$
# MacPorts system-wide configuration file.
@@ -6,40 +5,40 @@
# Directory under which MacPorts should install ports. This must be
# where MacPorts itself is installed.
-prefix @prefix_expanded@
+prefix @prefix_expanded@
# User to run operations as when MacPorts drops privileges.
-#macportsuser @RUNUSR@
+#macportsuser @RUNUSR@
# Directory for MacPorts working data.
-portdbpath @localstatedir_expanded@/macports
+portdbpath @localstatedir_expanded@/macports
# Colon-delimited list of directories to search for external tools
# (make(1), pkg-config(1), etc.). While installing ports, MacPorts uses
# this list for PATH. Changing this setting is intended for advanced
# users only and is unsupported.
-#binpath @prefix_expanded@/bin:@prefix_expanded@/sbin:/bin:/sbin:/usr/bin:/usr/sbin
+#binpath @prefix_expanded@/bin:@prefix_expanded@/sbin:/bin:/sbin:/usr/bin:/usr/sbin
# Directory containing Xcode Tools. By default, MacPorts determines this
# using xcode-select(1).
-#developer_dir @DEVELOPER_DIR@
+#developer_dir @DEVELOPER_DIR@
# Location of PackageMaker. Defaults to
# "${developer_dir}/Applications/Utilities/PackageMaker.app" with Xcode
# 4.2 and earlier and "/Applications/PackageMaker.app" with 4.3 and later.
-#packagemaker_path /Applications/PackageMaker.app
+#packagemaker_path /Applications/PackageMaker.app
# Directory for application bundles installed by ports.
-applications_dir @MPAPPLICATIONSDIR@
+applications_dir @MPAPPLICATIONSDIR@
# Directory for frameworks installed by ports.
-frameworks_dir @MPFRAMEWORKSDIR@
+frameworks_dir @MPFRAMEWORKSDIR@
# Location of the MacPorts sources list.
-sources_conf @MPCONFIGDIR_EXPANDED@/sources.conf
+sources_conf @MPCONFIGDIR_EXPANDED@/sources.conf
# Location of the MacPorts global variants definition file. Optional.
-variants_conf @MPCONFIGDIR_EXPANDED@/variants.conf
+variants_conf @MPCONFIGDIR_EXPANDED@/variants.conf
# When MacPorts should build ports from source.
# - ifneeded: Download binary archives if available; build from source
@@ -47,80 +46,80 @@
# - always: Always build from source; never try fetching archives.
# - never: Never build from source; try fetching archives and abort if
# unavailable.
-#buildfromsource ifneeded
+#buildfromsource ifneeded
# Type of archive to use for port images. Supported types are cpgz,
# cpio, tar, tbz, tbz2, tgz, tlz, txz, xar, zip.
-#portarchivetype tbz2
+#portarchivetype tbz2
# CPU architecture to target. Supported values are "ppc", "ppc64",
# "i386", and "x86_64". Defaults to:
# - OS X 10.5 and earlier: "ppc" on PowerPC, otherwise "i386".
# - OS X 10.6 and later: "x86_64" on Intel 64, otherwise "i386".
-#build_arch i386
+#build_arch i386
# Space-delimited list of CPU architectures to target when building
# universal. Defaults to "i386 ppc" on OS X 10.5 and earlier and
# "x64_64 i386" on OS X 10.6 and later.
-universal_archs @UNIVERSAL_ARCHS@
+universal_archs @UNIVERSAL_ARCHS@
# Use ccache, a compiler cache for C, C++, Objective-C, and
# Objective-C++. (See http://ccache.samba.org.) The "ccache" executable
# must exist in one of the directories in binpath.
-#configureccache no
+#configureccache no
# Directory for ccache's cached compiler output.
-#ccache_dir @localstatedir_expanded@/macports/build/.ccache
+#ccache_dir @localstatedir_expanded@/macports/build/.ccache
# Maximum size of files stored in ccache's cache. Append "G", "M", or
# "K" for gigabytes, megabytes, or kilobytes.
-#ccache_size 2G
+#ccache_size 2G
# Use distcc, a distributed compiler for C, C++, Objective-C, and
# Objective-C++. (See http://distcc.org.) The "distcc" executable must
# exist in one of the directories in binpath.
-#configuredistcc no
+#configuredistcc no
# Use pipes rather than temporary files for communication between the
# various stages of C, C++, Objective-C, and Objective-C++ compilation.
-#configurepipe yes
+#configurepipe yes
# Lowered scheduling priority to use for commands run during configure,
# build, and destroot. Accepted values are 0 (normal priority) through
# 20 (lowest priority).
-#buildnicevalue 0
+#buildnicevalue 0
# Number of simultaneous make(1) jobs to use when building ports. If set
# to 0, the number of jobs will be the lesser of:
# - number of automatically-detected CPU cores
# - gigabytes of physical memory + 1
-#buildmakejobs 0
+#buildmakejobs 0
# umask value to use when a port installs its files.
-#destroot_umask 022
+#destroot_umask 022
# Automatically execute "clean" after "install" of ports.
-#portautoclean yes
+#portautoclean yes
# Keep logs after successful installations.
-#keeplogs no
+#keeplogs no
# The rsync server for fetching MacPorts base during selfupdate. This
# setting is NOT used when downloading the ports tree; the sources for
# the ports tree are set in sources.conf. See
# https://trac.macports.org/wiki/Mirrors#MacPortsSource for a list of
# available servers.
-#rsync_server rsync.macports.org
+#rsync_server rsync.macports.org
# Location of MacPorts base sources on rsync_server. If this references
# a .tar file, a signed .rmd160 file must exist in the same directory
# and will be used to verify its integrity. See
# https://trac.macports.org/wiki/Mirrors#MacPortsSource to find the
# correct rsync_dir for a particular rsync_server.
-#rsync_dir release/tarballs/base.tar
+#rsync_dir release/tarballs/base.tar
# Options to pass to rsync when fetching MacPorts base and the ports tree.
-#rsync_options -rtzv --delete-after
+#rsync_options -rtzv --delete-after
# Type of generated StartupItems.
# - launchd: Create StartupItems for use with launchd.
@@ -129,12 +128,12 @@
# - default: Create StartupItems for launchd on OS X and for rc.d on
# other platforms.
# - none: Disable creation of StartupItems.
-#startupitem_type default
+#startupitem_type default
# Create system-level symlinks to generated StartupItems. If set to
# "no", symlinks will not be created; otherwise, symlinks will be placed
# in /Library/LaunchDaemons or /Library/LaunchAgents as appropriate.
-#startupitem_install yes
+#startupitem_install yes
# Extra environment variables to keep. MacPorts sanitizes its
# environment while processing ports, keeping:
@@ -152,7 +151,7 @@
# unsupported. (Note that sudo(8) sanitizes its environment on OS X 10.5
# and later, so it may have to be configured to pass the desired
# variables to MacPorts.)
-#extra_env KEEP_THIS THIS_TOO
+#extra_env KEEP_THIS THIS_TOO
# Override proxy-related environment variables. By default, MacPorts
# takes proxy settings from the environment, from the proxy_* options
@@ -162,39 +161,39 @@
# for rsync proxies. Also note that sudo(8) sanitizes its environment on
# OS X 10.5 and later, so it may have to be configured to pass desired
# variables to MacPorts.)
-#proxy_override_env no
+#proxy_override_env no
# Proxies. These have no default values. The analagous environment
# variables are "http_proxy", "HTTPS_PROXY", "FTP_PROXY", and
# "RSYNC_PROXY".
-#proxy_http hostname:12345
-#proxy_https hostname:12345
-#proxy_ftp hostname:12345
-#proxy_rsync hostname:12345
+#proxy_http hostname:12345
+#proxy_https hostname:12345
+#proxy_ftp hostname:12345
+#proxy_rsync hostname:12345
# Comma-delimited list of hosts that MacPorts should not access through
# the HTTP, HTTPS, and FTP proxies. This does not apply to rsync, and it
# has no default value.
-#proxy_skip internal1, internal2, internal3
+#proxy_skip internal1, internal2, internal3
# Space-delimited lists of download hosts that MacPorts should not use
# and that MacPorts should prefer, respectively, overriding the usual
# ping time checks. These have no default values.
-#host_blacklist badhost1.org badhost2.org
-#preferred_hosts preferredhost1.org preferredhost2.org
+#host_blacklist badhost1.org badhost2.org
+#preferred_hosts preferredhost1.org preferredhost2.org
# Whether MacPorts should automatically run rev-upgrade after upgrading
# ports.
-#revupgrade_autorun yes
+#revupgrade_autorun yes
# Whether rev-upgrade should automatically rebuild ports with broken
# linking or merely report the breakage. Supported values are "report"
# and "rebuild".
-#revupgrade_mode rebuild
+#revupgrade_mode rebuild
# Space-delimited list of files and directories to delete after the
# unarchive stage and before creating a pkg. Paths are interpreted
# relative to prefix, and there is no default value. This is useful for
# removing unnecessary files and directories prior to pkg or mpkg
# deployment.
-#pkg_post_unarchive_deletions include share/doc share/man
+#pkg_post_unarchive_deletions include share/doc share/man
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.macosforge.org/pipermail/macports-changes/attachments/20130608/1e492da2/attachment.html>
More information about the macports-changes
mailing list