[144305] trunk/dports/net/wireshark/Portfile
mojca at macports.org
mojca at macports.org
Wed Jan 6 04:09:25 PST 2016
Revision: 144305
https://trac.macports.org/changeset/144305
Author: mojca at macports.org
Date: 2016-01-06 04:09:25 -0800 (Wed, 06 Jan 2016)
Log Message:
-----------
wireshark: whitespace only
Modified Paths:
--------------
trunk/dports/net/wireshark/Portfile
Modified: trunk/dports/net/wireshark/Portfile
===================================================================
--- trunk/dports/net/wireshark/Portfile 2016-01-06 03:35:11 UTC (rev 144304)
+++ trunk/dports/net/wireshark/Portfile 2016-01-06 12:09:25 UTC (rev 144305)
@@ -1,75 +1,72 @@
+# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
# $Id$
-PortSystem 1.0
-name wireshark
-version 1.12.8
-revision 1
-categories net
-license {GPL-2 GPL-3}
-maintainers darkart.com:opendarwin.org
-description Graphical network analyzer and capture tool
-homepage http://wireshark.org/
-platforms darwin
+PortSystem 1.0
+name wireshark
+version 1.12.8
+revision 1
+categories net
+license {GPL-2 GPL-3}
+maintainers darkart.com:opendarwin.org
+description Graphical network analyzer and capture tool
+homepage http://wireshark.org/
+platforms darwin
-long_description A network analyzer that lets you capture and \
- interactively browse Ethernet frames. \
- Packet data can be read from a file, or live from a local \
- network interface.
+long_description A network analyzer that lets you capture and \
+ interactively browse Ethernet frames. \
+ Packet data can be read from a file, or live from a local \
+ network interface.
-master_sites http://www.wireshark.org/download/src/ \
- http://www.wireshark.org/download/src/all-versions/
+master_sites http://www.wireshark.org/download/src/ \
+ http://www.wireshark.org/download/src/all-versions/
-checksums md5 988a4595a4a87dafb3c4870ea40e89b5 \
+checksums md5 988a4595a4a87dafb3c4870ea40e89b5 \
sha1 d8c23120525a2f3505e822b7684e7367bcd0ba70 \
rmd160 bf87fd1e3404d04f6123d09798b46ea5b2af49e9
-use_bzip2 yes
+use_bzip2 yes
-conflicts wireshark-devel
+conflicts wireshark-devel
-patchfiles patch-configure.diff
+patchfiles patch-configure.diff
-depends_build \
- port:pkgconfig
-depends_lib \
- port:c-ares \
- port:gettext \
- port:kerberos5 \
- port:libcomerr \
- port:libgpg-error \
- path:lib/pkgconfig/glib-2.0.pc:glib2 \
- port:libpcap \
- port:zlib
+depends_build port:pkgconfig
+depends_lib port:c-ares \
+ port:gettext \
+ port:kerberos5 \
+ port:libcomerr \
+ port:libgpg-error \
+ path:lib/pkgconfig/glib-2.0.pc:glib2 \
+ port:libpcap \
+ port:zlib
-configure.args \
- --disable-osx-deploy-target \
- --without-libsmi \
- --disable-usr-local \
- --without-adns \
- --with-c-ares=${prefix} \
- --without-geoip \
- --without-gnutls \
- --with-gcrypt=no \
- --without-lua \
- --disable-ipv6 \
- --with-pcap=${prefix} \
- --with-ssl=${prefix} \
- --with-zlib=${prefix} \
- --mandir=\\\${prefix}/share/man \
- --infodir=\\\${prefix}/share/info \
- --without-portaudio \
- --disable-warnings-as-errors \
- --with-krb5=${prefix} \
- --without-ssl \
- --disable-wireshark
+configure.args --disable-osx-deploy-target \
+ --without-libsmi \
+ --disable-usr-local \
+ --without-adns \
+ --with-c-ares=${prefix} \
+ --without-geoip \
+ --without-gnutls \
+ --with-gcrypt=no \
+ --without-lua \
+ --disable-ipv6 \
+ --with-pcap=${prefix} \
+ --with-ssl=${prefix} \
+ --with-zlib=${prefix} \
+ --mandir=\\\${prefix}/share/man \
+ --infodir=\\\${prefix}/share/info \
+ --without-portaudio \
+ --disable-warnings-as-errors \
+ --with-krb5=${prefix} \
+ --without-ssl \
+ --disable-wireshark
-
configure.ldflags-append "-Wl,-search_paths_first"
default_variants +gnutls +libgcrypt +ipv6 +libsmi +geoip +rtp +ssl
if {![variant_isset qt] && ![variant_isset gtk3]} {
- default_variants +x11
+ default_variants +x11
}
## 1.10.0 doesn't include python options in configure
@@ -78,156 +75,149 @@
## } elseif {[variant_isset python26]} {
## } elseif {[variant_isset python27]} {
## } else {
-## default_variants +no_python
+## default_variants +no_python
## }
pre-destroot {
- xinstall -d ${destroot}${prefix}/include/wireshark/epan/crypt/
- xinstall -d ${destroot}${prefix}/include/wireshark/epan/dfilter/
- xinstall -d ${destroot}${prefix}/include/wireshark/epan/dissectors/
- xinstall -d ${destroot}${prefix}/include/wireshark/epan/ftypes/
- xinstall -d ${destroot}${prefix}/include/wireshark/wiretap/
- xinstall -m 644 -W ${worksrcpath}/ color.h config.h register.h ${destroot}${prefix}/include/wireshark/
- eval xinstall -m 644 [glob ${worksrcpath}/epan/*.h] ${destroot}${prefix}/include/wireshark/epan/
- eval xinstall -m 644 [glob ${worksrcpath}/epan/crypt/*.h] ${destroot}${prefix}/include/wireshark/epan/crypt/
- eval xinstall -m 644 [glob ${worksrcpath}/epan/dfilter/*.h] ${destroot}${prefix}/include/wireshark/epan/dfilter/
- eval xinstall -m 644 [glob ${worksrcpath}/epan/dissectors/*.h] ${destroot}${prefix}/include/wireshark/epan/dissectors/
- eval xinstall -m 644 [glob ${worksrcpath}/epan/ftypes/*.h] ${destroot}${prefix}/include/wireshark/epan/ftypes/
- eval xinstall -m 644 [glob ${worksrcpath}/wiretap/*.h] ${destroot}${prefix}/include/wireshark/wiretap/
+ xinstall -d ${destroot}${prefix}/include/wireshark/epan/crypt/
+ xinstall -d ${destroot}${prefix}/include/wireshark/epan/dfilter/
+ xinstall -d ${destroot}${prefix}/include/wireshark/epan/dissectors/
+ xinstall -d ${destroot}${prefix}/include/wireshark/epan/ftypes/
+ xinstall -d ${destroot}${prefix}/include/wireshark/wiretap/
+ xinstall -m 644 -W ${worksrcpath}/ color.h config.h register.h ${destroot}${prefix}/include/wireshark/
+ eval xinstall -m 644 [glob ${worksrcpath}/epan/*.h] ${destroot}${prefix}/include/wireshark/epan/
+ eval xinstall -m 644 [glob ${worksrcpath}/epan/crypt/*.h] ${destroot}${prefix}/include/wireshark/epan/crypt/
+ eval xinstall -m 644 [glob ${worksrcpath}/epan/dfilter/*.h] ${destroot}${prefix}/include/wireshark/epan/dfilter/
+ eval xinstall -m 644 [glob ${worksrcpath}/epan/dissectors/*.h] ${destroot}${prefix}/include/wireshark/epan/dissectors/
+ eval xinstall -m 644 [glob ${worksrcpath}/epan/ftypes/*.h] ${destroot}${prefix}/include/wireshark/epan/ftypes/
+ eval xinstall -m 644 [glob ${worksrcpath}/wiretap/*.h] ${destroot}${prefix}/include/wireshark/wiretap/
}
if {[string match *llvm-gcc-4.2* ${configure.compiler}]} {
- # see #32386
- configure.cflags -fno-var-tracking
+ # see #32386
+ configure.cflags -fno-var-tracking
}
variant adns description {use adns library for async. dns resolution instead of the default c-ares library} {
- configure.args-delete --without-adns \
- --with-c-ares=${prefix}
- configure.args-append --with-adns=${prefix} \
- --without-c-ares
- depends_lib-append port:adns
- depends_lib-delete port:c-ares
+ configure.args-delete --without-adns \
+ --with-c-ares=${prefix}
+ configure.args-append --with-adns=${prefix} \
+ --without-c-ares
+ depends_lib-append port:adns
+ depends_lib-delete port:c-ares
}
variant gnutls {
- configure.args-delete --without-gnutls
- configure.args-append --with-gnutls=yes
- depends_lib-append port:gnutls
+ configure.args-delete --without-gnutls
+ configure.args-append --with-gnutls=yes
+ depends_lib-append port:gnutls
}
variant libgcrypt {
- configure.args-delete --with-gcrypt=no
- configure.args-append --with-libgcrypt-prefix=${prefix}
- depends_lib-append port:libgcrypt
+ configure.args-delete --with-gcrypt=no
+ configure.args-append --with-libgcrypt-prefix=${prefix}
+ depends_lib-append port:libgcrypt
}
variant ipv6 {
- configure.args-delete --disable-ipv6
- configure.args-append --enable-ipv6
+ configure.args-delete --disable-ipv6
+ configure.args-append --enable-ipv6
}
# https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=10881
#variant lua {
-# configure.args-delete --without-lua
-# configure.args-append --with-lua=${prefix}
-# depends_lib-append port:lua
+# configure.args-delete --without-lua
+# configure.args-append --with-lua=${prefix}
+# depends_lib-append port:lua
#}
variant libsmi {
- configure.args-delete --without-libsmi
- configure.args-append --with-libsmi=${prefix}
- depends_lib-append port:libsmi
+ configure.args-delete --without-libsmi
+ configure.args-append --with-libsmi=${prefix}
+ depends_lib-append port:libsmi
}
variant geoip {
- configure.args-delete --without-geoip
- configure.args-append --with-geoip=${prefix}
- depends_lib-append port:libgeoip
+ configure.args-delete --without-geoip
+ configure.args-append --with-geoip=${prefix}
+ depends_lib-append port:libgeoip
}
## 1.10.0 doesn't include python options in configure
## variant python25 description {use python25 for the experimental python interface} conflicts no_python python26 python27 {
-## configure.args-append --with-python=${prefix}
-## depends_lib-append port:python25
+## configure.args-append --with-python=${prefix}
+## depends_lib-append port:python25
## }
-##
+##
## variant python26 description {use python26 for the experimental python interface} conflicts no_python python25 python27 {
-## configure.args-append --with-python=${prefix}
-## depends_lib-append port:python26
+## configure.args-append --with-python=${prefix}
+## depends_lib-append port:python26
## }
-##
+##
## variant python27 description {use python27 for the experimental python interface} conflicts no_python python25 python26 {
-## configure.args-append --with-python=${prefix}/lib/wireshark/python/${version}
-## depends_lib-append port:python27
+## configure.args-append --with-python=${prefix}/lib/wireshark/python/${version}
+## depends_lib-append port:python27
## }
-##
+##
## variant no_python description {do not build python interface} conflicts python25 python26 python27 {
-## configure.args-append --without-python
+## configure.args-append --without-python
## }
-variant qt description {use qt for the GUI} conflicts x11 gtk3 {
+variant qt description {use qt for the GUI} conflicts x11 gtk3 {
## qt 5.3.1 doesn't work at this point, wireshark needs to be adjusted for Qt 5.
-## depends_lib-append port:qt5-mac
- PortGroup qt4 1.0
- configure.args-delete --disable-wireshark
- configure.args-append --with-qt=yes
- configure.args-append --with-gtk2=no
- configure.args-append --with-gtk3=no
+## depends_lib-append port:qt5-mac
+ PortGroup qt4 1.0
+ configure.args-delete --disable-wireshark
+ configure.args-append --with-qt=yes
+ configure.args-append --with-gtk2=no
+ configure.args-append --with-gtk3=no
}
variant rtp description {add rtp support} {
- configure.args-delete --without-portaudio
- configure.args-append --with-portaudio=${prefix}
- depends_lib-append port:portaudio
+ configure.args-delete --without-portaudio
+ configure.args-append --with-portaudio=${prefix}
+ depends_lib-append port:portaudio
}
variant ssl {
- configure.args-delete --without-ssl
- depends_lib-append path:lib/libssl.dylib:openssl
+ configure.args-delete --without-ssl
+ depends_lib-append path:lib/libssl.dylib:openssl
}
-## variant x11 conflicts qt {
-variant x11 description {use X11 (gtk2) for GUI} conflicts qt gtk3 {
- depends_lib-append port:gtk2 \
- port:atk \
- path:lib/pkgconfig/cairo.pc:cairo \
- port:fontconfig \
- port:freetype \
- port:gdk-pixbuf2 \
- path:lib/pkgconfig/pango.pc:pango \
- port:xorg-libX11 \
- port:xorg-libXcomposite \
- port:xorg-libXcursor \
- port:xorg-libXdamage \
- port:xorg-libXext \
- port:xorg-libXfixes \
- port:xorg-libXi \
- port:xorg-libXinerama \
- port:xorg-libXrandr \
- port:xrender
+## variant x11 conflicts qt {
+variant x11 description {use X11 (gtk2) for GUI} conflicts qt gtk3 {
+ depends_lib-append port:gtk2 \
+ port:atk \
+ path:lib/pkgconfig/cairo.pc:cairo \
+ port:fontconfig \
+ port:freetype \
+ port:gdk-pixbuf2 \
+ path:lib/pkgconfig/pango.pc:pango \
+ port:xorg-libX11 \
+ port:xorg-libXcomposite \
+ port:xorg-libXcursor \
+ port:xorg-libXdamage \
+ port:xorg-libXext \
+ port:xorg-libXfixes \
+ port:xorg-libXi \
+ port:xorg-libXinerama \
+ port:xorg-libXrandr \
+ port:xrender
- configure.args-delete --disable-wireshark
- configure.args-append --with-qt=no
- configure.args-append --with-gtk2=yes
- configure.args-append --with-gtk3=no
+ configure.args-delete --disable-wireshark
+ configure.args-append --with-qt=no
+ configure.args-append --with-gtk2=yes
+ configure.args-append --with-gtk3=no
}
-variant gtk3 description {use X11 (gtk3) for GUI} conflicts qt x11 {
- depends_lib-append port:gtk3
- configure.args-delete --disable-wireshark
- configure.args-append --with-qt=no
- configure.args-append --with-gtk2=no
- configure.args-append --with-gtk3=yes
+variant gtk3 description {use X11 (gtk3) for GUI} conflicts qt x11 {
+ depends_lib-append port:gtk3
+ configure.args-delete --disable-wireshark
+ configure.args-append --with-qt=no
+ configure.args-append --with-gtk2=no
+ configure.args-append --with-gtk3=yes
}
-
-livecheck.type regex
-livecheck.url ${homepage}download.html
-livecheck.regex "Stable Release \\((\\d+(?:\\.\\d+)*)"
-#
-##EOF
-
-
-#
-##EOF
+livecheck.type regex
+livecheck.url ${homepage}download.html
+livecheck.regex "Stable Release \\((\\d+(?:\\.\\d+)*)"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.macosforge.org/pipermail/macports-changes/attachments/20160106/05b311d9/attachment-0001.html>
More information about the macports-changes
mailing list