[MacPorts] #32239: Error installing glib2 on a G5 xserver OS X 10.5.8
MacPorts
noreply at macports.org
Thu Nov 24 13:44:47 PST 2011
#32239: Error installing glib2 on a G5 xserver OS X 10.5.8
------------------------------+---------------------------------------------
Reporter: brad_ward@… | Owner: ryandesign@…
Type: defect | Status: assigned
Priority: Normal | Milestone:
Component: ports | Version: 2.0.3
Keywords: | Port: glib2
------------------------------+---------------------------------------------
Changes (by ryandesign@…):
* status: new => assigned
* keywords: glib2 =>
* owner: macports-tickets@… => ryandesign@…
* port: glib2 @2.30.2 => glib2
Old description:
> I am very new to using port and I am trying to install glib2 and keep
> getting the following error:
>
> Hardware = G5 Xserver
> OS = OS X 10.5.8
> Software = MacPorts base 2.0.3 PPC
>
> Error: Status 1 encountered during processing.
>
> Here is what I am getting from the main.log. (I have included the
> complete log at the bottom this message.)
>
> :info:build checking for special C compiler options needed for large
> files... no
> :info:build checking for _FILE_OFFSET_BITS value needed for large
> files... no
> :info:build ./configure: line 6969: syntax error near unexpected token
> `0.16'
> :info:build ./configure: line 6969: `PKG_PROG_PKG_CONFIG(0.16)'
> :info:build make: *** [config.status] Error 2
> :info:build make: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2'
> :info:build shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2"
> && /usr/bin/make -j2 -w all V=1 " returned error 2
> :error:build Target org.macports.build returned: shell command failed
> (see log for details)
> :debug:build Backtrace: shell command failed (see log for details)
> while executing
> "command_exec build"
> (procedure "portbuild::build_main" line 8)
> invoked from within
> "$procedure $targetname"
>
> Please let me know where to look to resolve the issue.
>
> Here is the complete log file:
>
> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main xz 5.0.3_0 exists in the ports tree
> :debug:main xz 5.0.3_0 is the latest installed
> :debug:main xz 5.0.3_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! xz 5.0.3_0 >= xz 5.0.3_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0 is the latest installed
> :debug:main libiconv 1.14_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2 is the latest installed
> :debug:main gettext 0.18.1.1_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1 is the latest installed
> :debug:main ncurses 5.9_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.0.1_1 exists in the ports tree
> :debug:main expat 2.0.1_1 is the latest installed
> :debug:main expat 2.0.1_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main autoconf 2.68_2 exists in the ports tree
> :debug:main autoconf 2.68_2 is the latest installed
> :debug:main autoconf 2.68_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.12.3_1 exists in the ports tree
> :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
> :debug:main perl5 5.12.3_1 +perl5_12 is active
> :debug:main Merging existing variants '+perl5_12' into variants
> :debug:main new fully merged portvariants: perl5_12 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Executing variant perl5_12 provides perl5_12
> :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.12 5.12.3_2 exists in the ports tree
> :debug:main perl5.12 5.12.3_2 is the latest installed
> :debug:main perl5.12 5.12.3_2 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdbm 1.10_0 exists in the ports tree
> :debug:main gdbm 1.10_0 is the latest installed
> :debug:main gdbm 1.10_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gdbm 1.10_0 >= gdbm 1.10_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main m4 1.4.16_0 exists in the ports tree
> :debug:main m4 1.4.16_0 is the latest installed
> :debug:main m4 1.4.16_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main help2man 1.40.4_1 exists in the ports tree
> :debug:main help2man 1.40.4_1 is the latest installed
> :debug:main help2man 1.40.4_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
> :debug:main p5.12-locale-gettext 1.50.0_6 is the latest installed
> :debug:main p5.12-locale-gettext 1.50.0_6 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
> -locale-gettext
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:main Re-registering default for livecheck.version
> :debug:main Re-registering default for configure.universal_args
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12
> -locale-gettext 1.50.0_6
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main automake 1.11.1_0 exists in the ports tree
> :debug:main automake 1.11.1_0 is the latest installed
> :debug:main automake 1.11.1_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libtool 2.4.2_0 exists in the ports tree
> :debug:main libtool 2.4.2_0 is the latest installed
> :debug:main libtool 2.4.2_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.5_0 exists in the ports tree
> :debug:main zlib 1.2.5_0 is the latest installed
> :debug:main zlib 1.2.5_0 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libffi 3.0.10_1 exists in the ports tree
> :debug:main libffi 3.0.10_1 is the latest installed
> :debug:main libffi 3.0.10_1 is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
> :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libffi 3.0.10_1 >= libffi 3.0.10_1
> :msg:main ---> Computing dependencies for glib2:info:main .:debug:main
> Checking for conflicts against glib2
> :debug:main Searching for dependency: glib2-devel
> :debug:main Didn't find receipt, going to depspec regex for: glib2-devel
> :debug:main Searching for dependency: xz
> :debug:main Found Dependency: receipt exists for xz
> :debug:main Searching for dependency: autoconf
> :debug:main Found Dependency: receipt exists for autoconf
> :debug:main Searching for dependency: automake
> :debug:main Found Dependency: receipt exists for automake
> :debug:main Searching for dependency: libtool
> :debug:main Found Dependency: receipt exists for libtool
> :debug:main Searching for dependency: gettext
> :debug:main Found Dependency: receipt exists for gettext
> :debug:main Searching for dependency: libiconv
> :debug:main Found Dependency: receipt exists for libiconv
> :debug:main Searching for dependency: zlib
> :debug:main Found Dependency: receipt exists for zlib
> :debug:main Searching for dependency: libffi
> :debug:main Found Dependency: receipt exists for libffi
> :debug:main Searching for dependency: perl5
> :debug:main Found Dependency: receipt exists for perl5
> :msg:main
> :debug:main Executing org.macports.main (glib2)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 506
> :debug:main euid changed to: 503
> :debug:main Skipping completed org.macports.archivefetch (glib2)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.fetch (glib2)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.checksum (glib2)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.extract (glib2)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.patch (glib2)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:main Skipping completed org.macports.configure (glib2)
> :debug:main Privilege de-escalation not attempted as not running as root.
> :debug:build build phase started at Thu Nov 24 14:25:53 EST 2011
> :notice:build ---> Building glib2
> :debug:build Executing org.macports.build (glib2)
> :debug:build Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.5'
> :debug:build Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2"
> && /usr/bin/make -j2 -w all V=1'
> :debug:build Executing command line: cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2"
> && /usr/bin/make -j2 -w all V=1
> :info:build make: Entering directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2'
> :info:build /bin/sh ./config.status --recheck
> :info:build running CONFIG_SHELL=/bin/sh /bin/sh ./configure
> --prefix=/opt/local --enable-static --disable-dtrace CC=/usr/bin/gcc-4.0
> CFLAGS=-pipe -O2 -fstrict-aliasing -arch ppc LDFLAGS=-L/opt/local/lib
> -lresolv -bind_at_load -arch ppc CPPFLAGS=-I/opt/local/include
> CXX=/usr/bin/g++-4.0 CXXFLAGS=-pipe -O2 -arch ppc PKG_CONFIG=false
> ZLIB_CFLAGS=-I/opt/local/include ZLIB_LIBS=-L/opt/local/lib -lz
> LIBFFI_CFLAGS=-I/opt/local/lib/libffi-3.0.10/include
> LIBFFI_LIBS=-L/opt/local/lib -lffi --no-create --no-recursion
> :info:build checking for a BSD-compatible install... /usr/bin/install -c
> :info:build checking whether build environment is sane... yes
> :info:build checking for a thread-safe mkdir -p... ./install-sh -c -d
> :info:build checking for gawk... no
> :info:build checking for mawk... no
> :info:build checking for nawk... no
> :info:build checking for awk... awk
> :info:build checking whether make sets $(MAKE)... yes
> :info:build checking how to create a ustar tar archive... gnutar
> :info:build checking whether to disable maintainer-specific portions of
> Makefiles... yes
> :info:build checking for gcc... /usr/bin/gcc-4.0
> :info:build checking whether the C compiler works... yes
> :info:build checking for C compiler default output file name... a.out
> :info:build checking for suffix of executables...
> :info:build checking whether we are cross compiling... no
> :info:build checking for suffix of object files... o
> :info:build checking whether we are using the GNU C compiler... yes
> :info:build checking whether /usr/bin/gcc-4.0 accepts -g... yes
> :info:build checking for /usr/bin/gcc-4.0 option to accept ISO C89...
> none needed
> :info:build checking for style of include used by make... GNU
> :info:build checking dependency style of /usr/bin/gcc-4.0... gcc3
> :info:build checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
> :info:build checking build system type... powerpc-apple-darwin9.8.0
> :info:build checking host system type... powerpc-apple-darwin9.8.0
> :info:build checking for the BeOS... no
> :info:build checking for Win32... no
> :info:build checking for Mac OS X Carbon support... yes
> :info:build checking for grep that handles long lines and -e...
> /usr/bin/grep
> :info:build checking for egrep... /usr/bin/grep -E
> :info:build checking whether we are using the GNU C Library 2.1 or
> newer... no
> :info:build checking whether to enable garbage collector friendliness...
> no
> :info:build checking whether to disable memory pools... no
> :info:build readlink: illegal option -- f
> :info:build usage: readlink [-n] [file ...]
> :info:build checking whether we are using the GNU C++ compiler... yes
> :info:build checking whether /usr/bin/g++-4.0 accepts -g... yes
> :info:build checking dependency style of /usr/bin/g++-4.0... gcc3
> :info:build checking for gcc... (cached) /usr/bin/gcc-4.0
> :info:build checking whether we are using the GNU C compiler... (cached)
> yes
> :info:build checking whether /usr/bin/gcc-4.0 accepts -g... (cached) yes
> :info:build checking for /usr/bin/gcc-4.0 option to accept ISO C89...
> (cached) none needed
> :info:build checking dependency style of /usr/bin/gcc-4.0... (cached)
> gcc3
> :info:build checking whether /usr/bin/gcc-4.0 and cc understand -c and -o
> together... yes
> :info:build checking for special C compiler options needed for large
> files... no
> :info:build checking for _FILE_OFFSET_BITS value needed for large
> files... no
> :info:build ./configure: line 6969: syntax error near unexpected token
> `0.16'
> :info:build ./configure: line 6969: `PKG_PROG_PKG_CONFIG(0.16)'
> :info:build make: *** [config.status] Error 2
> :info:build make: Leaving directory
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2'
> :info:build shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2"
> && /usr/bin/make -j2 -w all V=1 " returned error 2
> :error:build Target org.macports.build returned: shell command failed
> (see log for details)
> :debug:build Backtrace: shell command failed (see log for details)
> while executing
> "command_exec build"
> (procedure "portbuild::build_main" line 8)
> invoked from within
> "$procedure $targetname"
> :info:build Warning: the following items did not execute (for glib2):
> org.macports.activate org.macports.build org.macports.destroot
> org.macports.install
> :notice:build Log for glib2 is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/main.log
New description:
I am very new to using port and I am trying to install glib2 and keep
getting the following error:
Hardware = G5 Xserver [[br]]
OS = OS X 10.5.8 [[br]]
Software = MacPorts base 2.0.3 PPC
{{{
Error: Status 1 encountered during processing.
}}}
Here is what I am getting from the main.log. (I have included the complete
log at the bottom this message.)
{{{
:info:build checking for special C compiler options needed for large
files... no
:info:build checking for _FILE_OFFSET_BITS value needed for large files...
no
:info:build ./configure: line 6969: syntax error near unexpected token
`0.16'
:info:build ./configure: line 6969: `PKG_PROG_PKG_CONFIG(0.16)'
:info:build make: *** [config.status] Error 2
:info:build make: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2'
:info:build shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2"
&& /usr/bin/make -j2 -w all V=1 " returned error 2
:error:build Target org.macports.build returned: shell command failed (see
log for details)
:debug:build Backtrace: shell command failed (see log for details)
while executing
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
}}}
Please let me know where to look to resolve the issue.
Here is the complete log file:
{{{
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main xz 5.0.3_0 exists in the ports tree
:debug:main xz 5.0.3_0 is the latest installed
:debug:main xz 5.0.3_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xz 5.0.3_0 >= xz 5.0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0 is the latest installed
:debug:main libiconv 1.14_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 is the latest installed
:debug:main gettext 0.18.1.1_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1 is the latest installed
:debug:main ncurses 5.9_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 is the latest installed
:debug:main expat 2.0.1_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main autoconf 2.68_2 exists in the ports tree
:debug:main autoconf 2.68_2 is the latest installed
:debug:main autoconf 2.68_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.3_1 exists in the ports tree
:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
:debug:main perl5 5.12.3_1 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.3_2 exists in the ports tree
:debug:main perl5.12 5.12.3_2 is the latest installed
:debug:main perl5.12 5.12.3_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.10_0 exists in the ports tree
:debug:main gdbm 1.10_0 is the latest installed
:debug:main gdbm 1.10_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! gdbm 1.10_0 >= gdbm 1.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main m4 1.4.16_0 exists in the ports tree
:debug:main m4 1.4.16_0 is the latest installed
:debug:main m4 1.4.16_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main help2man 1.40.4_1 exists in the ports tree
:debug:main help2man 1.40.4_1 is the latest installed
:debug:main help2man 1.40.4_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
:debug:main p5.12-locale-gettext 1.50.0_6 is the latest installed
:debug:main p5.12-locale-gettext 1.50.0_6 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-locale-gettext
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for livecheck.version
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12
-locale-gettext 1.50.0_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main automake 1.11.1_0 exists in the ports tree
:debug:main automake 1.11.1_0 is the latest installed
:debug:main automake 1.11.1_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal
variant
:debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libtool 2.4.2_0 exists in the ports tree
:debug:main libtool 2.4.2_0 is the latest installed
:debug:main libtool 2.4.2_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0 is the latest installed
:debug:main zlib 1.2.5_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libffi 3.0.10_1 exists in the ports tree
:debug:main libffi 3.0.10_1 is the latest installed
:debug:main libffi 3.0.10_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default
one
:debug:main No need to upgrade! libffi 3.0.10_1 >= libffi 3.0.10_1
:msg:main ---> Computing dependencies for glib2:info:main .:debug:main
Checking for conflicts against glib2
:debug:main Searching for dependency: glib2-devel
:debug:main Didn't find receipt, going to depspec regex for: glib2-devel
:debug:main Searching for dependency: xz
:debug:main Found Dependency: receipt exists for xz
:debug:main Searching for dependency: autoconf
:debug:main Found Dependency: receipt exists for autoconf
:debug:main Searching for dependency: automake
:debug:main Found Dependency: receipt exists for automake
:debug:main Searching for dependency: libtool
:debug:main Found Dependency: receipt exists for libtool
:debug:main Searching for dependency: gettext
:debug:main Found Dependency: receipt exists for gettext
:debug:main Searching for dependency: libiconv
:debug:main Found Dependency: receipt exists for libiconv
:debug:main Searching for dependency: zlib
:debug:main Found Dependency: receipt exists for zlib
:debug:main Searching for dependency: libffi
:debug:main Found Dependency: receipt exists for libffi
:debug:main Searching for dependency: perl5
:debug:main Found Dependency: receipt exists for perl5
:msg:main
:debug:main Executing org.macports.main (glib2)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 506
:debug:main euid changed to: 503
:debug:main Skipping completed org.macports.archivefetch (glib2)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (glib2)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (glib2)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.extract (glib2)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.patch (glib2)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.configure (glib2)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Thu Nov 24 14:25:53 EST 2011
:notice:build ---> Building glib2
:debug:build Executing org.macports.build (glib2)
:debug:build Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.5'
:debug:build Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2"
&& /usr/bin/make -j2 -w all V=1'
:debug:build Executing command line: cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2"
&& /usr/bin/make -j2 -w all V=1
:info:build make: Entering directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2'
:info:build /bin/sh ./config.status --recheck
:info:build running CONFIG_SHELL=/bin/sh /bin/sh ./configure
--prefix=/opt/local --enable-static --disable-dtrace CC=/usr/bin/gcc-4.0
CFLAGS=-pipe -O2 -fstrict-aliasing -arch ppc LDFLAGS=-L/opt/local/lib
-lresolv -bind_at_load -arch ppc CPPFLAGS=-I/opt/local/include
CXX=/usr/bin/g++-4.0 CXXFLAGS=-pipe -O2 -arch ppc PKG_CONFIG=false
ZLIB_CFLAGS=-I/opt/local/include ZLIB_LIBS=-L/opt/local/lib -lz
LIBFFI_CFLAGS=-I/opt/local/lib/libffi-3.0.10/include
LIBFFI_LIBS=-L/opt/local/lib -lffi --no-create --no-recursion
:info:build checking for a BSD-compatible install... /usr/bin/install -c
:info:build checking whether build environment is sane... yes
:info:build checking for a thread-safe mkdir -p... ./install-sh -c -d
:info:build checking for gawk... no
:info:build checking for mawk... no
:info:build checking for nawk... no
:info:build checking for awk... awk
:info:build checking whether make sets $(MAKE)... yes
:info:build checking how to create a ustar tar archive... gnutar
:info:build checking whether to disable maintainer-specific portions of
Makefiles... yes
:info:build checking for gcc... /usr/bin/gcc-4.0
:info:build checking whether the C compiler works... yes
:info:build checking for C compiler default output file name... a.out
:info:build checking for suffix of executables...
:info:build checking whether we are cross compiling... no
:info:build checking for suffix of object files... o
:info:build checking whether we are using the GNU C compiler... yes
:info:build checking whether /usr/bin/gcc-4.0 accepts -g... yes
:info:build checking for /usr/bin/gcc-4.0 option to accept ISO C89... none
needed
:info:build checking for style of include used by make... GNU
:info:build checking dependency style of /usr/bin/gcc-4.0... gcc3
:info:build checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
:info:build checking build system type... powerpc-apple-darwin9.8.0
:info:build checking host system type... powerpc-apple-darwin9.8.0
:info:build checking for the BeOS... no
:info:build checking for Win32... no
:info:build checking for Mac OS X Carbon support... yes
:info:build checking for grep that handles long lines and -e...
/usr/bin/grep
:info:build checking for egrep... /usr/bin/grep -E
:info:build checking whether we are using the GNU C Library 2.1 or
newer... no
:info:build checking whether to enable garbage collector friendliness...
no
:info:build checking whether to disable memory pools... no
:info:build readlink: illegal option -- f
:info:build usage: readlink [-n] [file ...]
:info:build checking whether we are using the GNU C++ compiler... yes
:info:build checking whether /usr/bin/g++-4.0 accepts -g... yes
:info:build checking dependency style of /usr/bin/g++-4.0... gcc3
:info:build checking for gcc... (cached) /usr/bin/gcc-4.0
:info:build checking whether we are using the GNU C compiler... (cached)
yes
:info:build checking whether /usr/bin/gcc-4.0 accepts -g... (cached) yes
:info:build checking for /usr/bin/gcc-4.0 option to accept ISO C89...
(cached) none needed
:info:build checking dependency style of /usr/bin/gcc-4.0... (cached) gcc3
:info:build checking whether /usr/bin/gcc-4.0 and cc understand -c and -o
together... yes
:info:build checking for special C compiler options needed for large
files... no
:info:build checking for _FILE_OFFSET_BITS value needed for large files...
no
:info:build ./configure: line 6969: syntax error near unexpected token
`0.16'
:info:build ./configure: line 6969: `PKG_PROG_PKG_CONFIG(0.16)'
:info:build make: *** [config.status] Error 2
:info:build make: Leaving directory
`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2'
:info:build shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/work/glib-2.30.2"
&& /usr/bin/make -j2 -w all V=1 " returned error 2
:error:build Target org.macports.build returned: shell command failed (see
log for details)
:debug:build Backtrace: shell command failed (see log for details)
while executing
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for glib2):
org.macports.activate org.macports.build org.macports.destroot
org.macports.install
:notice:build Log for glib2 is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/main.log
}}}
--
--
Ticket URL: <https://trac.macports.org/ticket/32239#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list