[MacPorts] #32768: did not install ntop.

Thu Jan 5 03:36:07 PST 2012

#32768: did not install ntop.
-------------------------------+--------------------------------------------
  Reporter:  anfojp@…          |       Owner:  macports-tickets@…                   
      Type:  defect            |      Status:  closed                               
  Priority:  Normal            |   Milestone:                                       
 Component:  ports             |     Version:  2.0.3                                
Resolution:  invalid           |    Keywords:                                       
      Port:  ntop              |  
-------------------------------+--------------------------------------------
Changes (by cal@…):

  * status:  new => closed
 * cc: markd@… (added)
  * resolution:  => invalid
  * milestone:  MacPorts 2.0.4 =>

Old description:

> Below a log for ntop.
>

> version:1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libevent 2.0.16_0 exists in the ports tree
> :debug:main libevent 2.0.16_0  is the latest installed
> :debug:main libevent 2.0.16_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libevent
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libevent 2.0.16_0 >= libevent 2.0.16_0
> :debug:main epoch: in tree: 1 installed: 1
> :debug:main autoconf 2.68_2 exists in the ports tree
> :debug:main autoconf 2.68_2  is the latest installed
> :debug:main autoconf 2.68_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5 5.12.3_1 exists in the ports tree
> :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
> :debug:main perl5 5.12.3_1 +perl5_12 is active
> :debug:main Merging existing variants '+perl5_12' into variants
> :debug:main new fully merged portvariants: perl5_12 +
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main universal_variant is false, so not adding the default
> universal variant
> :debug:main Executing variant perl5_12 provides perl5_12
> :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main perl5.12 5.12.3_3 exists in the ports tree
> :debug:main perl5.12 5.12.3_3  is the latest installed
> :debug:main perl5.12 5.12.3_3  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gdbm 1.10_1 exists in the ports tree
> :debug:main gdbm 1.10_1  is the latest installed
> :debug:main gdbm 1.10_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main gettext 0.18.1.1_2 exists in the ports tree
> :debug:main gettext 0.18.1.1_2  is the latest installed
> :debug:main gettext 0.18.1.1_2  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libiconv 1.14_0 exists in the ports tree
> :debug:main libiconv 1.14_0  is the latest installed
> :debug:main libiconv 1.14_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main ncurses 5.9_1 exists in the ports tree
> :debug:main ncurses 5.9_1  is the latest installed
> :debug:main ncurses 5.9_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main expat 2.0.1_1 exists in the ports tree
> :debug:main expat 2.0.1_1  is the latest installed
> :debug:main expat 2.0.1_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main m4 1.4.16_0 exists in the ports tree
> :debug:main m4 1.4.16_0  is the latest installed
> :debug:main m4 1.4.16_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main help2man 1.40.4_1 exists in the ports tree
> :debug:main help2man 1.40.4_1  is the latest installed
> :debug:main help2man 1.40.4_1  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
> :debug:main p5.12-locale-gettext 1.50.0_6  is the latest installed
> :debug:main p5.12-locale-gettext 1.50.0_6  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
> -locale-gettext
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
> :debug:main Re-registering default for livecheck.version
> :debug:main Re-registering default for configure.universal_args
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12
> -locale-gettext 1.50.0_6
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main automake 1.11.2_0 exists in the ports tree
> :debug:main automake 1.11.2_0  is the latest installed
> :debug:main automake 1.11.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main only one arch supported, so not adding the default universal
> variant
> :debug:main No need to upgrade! automake 1.11.2_0 >= automake 1.11.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libtool 2.4.2_0 exists in the ports tree
> :debug:main libtool 2.4.2_0  is the latest installed
> :debug:main libtool 2.4.2_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main libpng 1.4.8_0 exists in the ports tree
> :debug:main libpng 1.4.8_0  is the latest installed
> :debug:main libpng 1.4.8_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0
> :debug:main epoch: in tree: 0 installed: 0
> :debug:main zlib 1.2.5_0 exists in the ports tree
> :debug:main zlib 1.2.5_0  is the latest installed
> :debug:main zlib 1.2.5_0  is active
> :debug:main Merging existing variants '' into variants
> :debug:main new fully merged portvariants:
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
> :msg:main --->  Computing dependencies for ntop:info:main .:debug:main
> Searching for dependency: gawk
> :debug:main Didn't find receipt, going to depspec regex for: gawk
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Searching for dependency: wget
> :debug:main Didn't find receipt, going to depspec regex for: wget
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/wget
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Executing variant ssl provides ssl
> :debug:main Searching for dependency: rrdtool
> :debug:main Didn't find receipt, going to depspec regex for: rrdtool
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rrdtool
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Searching for dependency: libevent
> :debug:main Found Dependency: receipt exists for libevent
> :debug:main Searching for dependency: autoconf
> :debug:main Found Dependency: receipt exists for autoconf
> :debug:main Searching for dependency: automake
> :debug:main Found Dependency: receipt exists for automake
> :debug:main Searching for dependency: libtool
> :debug:main Found Dependency: receipt exists for libtool
> :debug:main Searching for dependency: libpcap
> :debug:main Didn't find receipt, going to depspec regex for: libpcap
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Searching for dependency: gd2
> :debug:main Didn't find receipt, going to depspec regex for: gd2
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
> :debug:main Using group file
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main universal variant already exists, so not adding the default
> one
> :debug:main Searching for dependency: libpng
> :debug:main Found Dependency: receipt exists for libpng
> :debug:main Searching for dependency: gdbm
> :debug:main Found Dependency: receipt exists for gdbm
> :debug:main Searching for dependency: libgeoip
> :debug:main Didn't find receipt, going to depspec regex for: libgeoip
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgeoip
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :info:main .:debug:main Searching for dependency: readline
> :debug:main Found Dependency: receipt exists for readline
> :debug:main Searching for dependency: gettext
> :debug:main Found Dependency: receipt exists for gettext
> :info:main .:debug:main Searching for dependency: texinfo
> :debug:main Found Dependency: receipt exists for texinfo
> :debug:main Searching for dependency: perl5
> :debug:main Found Dependency: receipt exists for perl5
> :debug:main Searching for dependency: pkgconfig
> :debug:main Found Dependency: receipt exists for pkgconfig
> :debug:main Searching for dependency: libidn
> :debug:main Found Dependency: receipt exists for libidn
> :debug:main Searching for dependency: gnutls
> :debug:main Found Dependency: receipt exists for gnutls
> :info:main .:debug:main Searching for dependency: expat
> :debug:main Found Dependency: receipt exists for expat
> :debug:main Searching for dependency: glib2
> :debug:main Found Dependency: receipt exists for glib2
> :debug:main Searching for dependency: libiconv
> :debug:main Found Dependency: receipt exists for libiconv
> :debug:main Searching for dependency: pango
> :debug:main Found Dependency: receipt exists for pango
> :debug:main Searching for dependency: perl5
> :debug:main Found Dependency: receipt exists for perl5
> :debug:main Searching for dependency: tcl
> :debug:main Didn't find receipt, going to depspec regex for: tcl
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :debug:main Searching for dependency: zlib
> :debug:main Found Dependency: receipt exists for zlib
> :debug:main Searching for dependency: libxml2
> :debug:main Found Dependency: receipt exists for libxml2
> :debug:main Searching for dependency: intltool
> :debug:main Found Dependency: receipt exists for intltool
> :info:main .:info:main .:info:main .:debug:main Searching for dependency:
> jpeg
> :debug:main Found Dependency: receipt exists for jpeg
> :debug:main Searching for dependency: freetype
> :debug:main Found Dependency: receipt exists for freetype
> :debug:main Searching for dependency: fontconfig
> :debug:main Found Dependency: receipt exists for fontconfig
> :debug:main Searching for dependency: xpm
> :debug:main Didn't find receipt, going to depspec regex for: xpm
> :debug:main Changing to port directory:
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
> :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
> :debug:main org.macports.load registered provides 'load', a pre-existing
> procedure. Target override will not be provided
> :debug:main org.macports.unload registered provides 'unload', a pre-
> existing procedure. Target override will not be provided
> :debug:main org.macports.distfiles registered provides 'distfiles', a
> pre-existing procedure. Target override will not be provided
> :debug:main adding the default universal variant
> :debug:main Reading variant descriptions from
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
> :info:main .:debug:main Searching for dependency: xorg-xproto
> :debug:main Found Dependency: receipt exists for xorg-xproto
> :debug:main Searching for dependency: xorg-libXt
> :debug:main Found Dependency: receipt exists for xorg-libXt
> :debug:main Searching for dependency: xorg-libXext
> :debug:main Found Dependency: receipt exists for xorg-libXext
> :info:main .:msg:main
> :msg:main --->  Dependencies to be installed: gawk gd2 xpm libgeoip
> libpcap rrdtool tcl wget
> :debug:main Starting logging for gawk
> :debug:clean Starting logging for xpm
> :debug:clean Starting logging for gd2
> :debug:clean Starting logging for libgeoip
> :debug:clean Starting logging for libpcap
> :debug:clean Starting logging for tcl
> :debug:clean Starting logging for rrdtool
> :debug:clean Starting logging for wget
> :debug:main Executing org.macports.main (ntop)
> :debug:main changing euid/egid - current euid: 0 - current egid: 0
> :debug:main egid changed to: 502
> :debug:main euid changed to: 505
> :debug:archivefetch archivefetch phase started at Thu Jan  5 12:11:53 JST
> 2012
> :msg:archivefetch --->  Fetching archive for ntop
> :debug:archivefetch Executing org.macports.archivefetch (ntop)
> :debug:archivefetch Can't run archivefetch on this port without elevated
> privileges. Escalating privileges back to root.
> :debug:archivefetch euid changed to: 0. egid changed to: 0.
> :debug:archivefetch changing euid/egid - current euid: 0 - current egid:
> 0
> :debug:archivefetch egid changed to: 502
> :debug:archivefetch euid changed to: 505
> :info:archivefetch --->  ntop-3.3.10_5.darwin_10.x86_64.tbz2 doesn't seem
> to exist in /opt/local/var/macports/software/ntop
> :msg:archivefetch --->  Attempting to fetch
> ntop-3.3.10_5.darwin_10.x86_64.tbz2 from
> http://packages.macports.org/ntop
> :debug:archivefetch Fetching archive failed:: The requested URL returned
> error: 404
> :debug:archivefetch Privilege de-escalation not attempted as not running
> as root.
> :debug:fetch fetch phase started at Thu Jan  5 12:11:53 JST 2012
> :notice:fetch --->  Fetching ntop
> :debug:fetch Can't run fetch on this port without elevated privileges.
> Escalating privileges back to root.
> :debug:fetch euid changed to: 0. egid changed to: 0.
> :debug:fetch changing euid/egid - current euid: 0 - current egid: 0
> :debug:fetch egid changed to: 502
> :debug:fetch euid changed to: 505
> :debug:fetch Executing org.macports.fetch (ntop)
> :info:fetch --->  ntop-3.3.10.tar.gz doesn't seem to exist in
> /opt/local/var/macports/distfiles/ntop
> :debug:fetch Pinging downloads.sourceforge.net...
> :debug:fetch Pinging aarnet.dl.sourceforge.net...
> :debug:fetch Pinging biznetnetworks.dl.sourceforge.net...
> :debug:fetch Pinging cdnetworks-us-1.dl.sourceforge.net...
> :debug:fetch Pinging cdnetworks-us-2.dl.sourceforge.net...
> :debug:fetch Pinging cdnetworks-kr-1.dl.sourceforge.net...
> :debug:fetch Pinging cdnetworks-kr-2.dl.sourceforge.net...
> :debug:fetch Pinging citylan.dl.sourceforge.net...
> :debug:fetch Pinging dfn.dl.sourceforge.net...
> :debug:fetch Pinging fastbull.dl.sourceforge.net...
> :debug:fetch Pinging freefr.dl.sourceforge.net...
> :debug:fetch Pinging garr.dl.sourceforge.net...
> :debug:fetch Pinging heanet.dl.sourceforge.net...
> :debug:fetch Pinging hivelocity.dl.sourceforge.net...
> :debug:fetch Pinging ignum.dl.sourceforge.net...
> :debug:fetch Pinging internode.dl.sourceforge.net...
> :debug:fetch Pinging iweb.dl.sourceforge.net...
> :debug:fetch Pinging jaist.dl.sourceforge.net...
> :debug:fetch Pinging kent.dl.sourceforge.net...
> :debug:fetch Pinging mesh.dl.sourceforge.net...
> :debug:fetch Pinging nchc.dl.sourceforge.net...
> :debug:fetch Pinging ncu.dl.sourceforge.net...
> :debug:fetch Pinging netcologne.dl.sourceforge.net...
> :debug:fetch Pinging puzzle.dl.sourceforge.net...
> :debug:fetch Pinging softlayer.dl.sourceforge.net...
> :debug:fetch Pinging space.dl.sourceforge.net...
> :debug:fetch Pinging sunet.dl.sourceforge.net...
> :debug:fetch Pinging surfnet.dl.sourceforge.net...
> :debug:fetch Pinging switch.dl.sourceforge.net...
> :debug:fetch Pinging transact.dl.sourceforge.net...
> :debug:fetch Pinging ufpr.dl.sourceforge.net...
> :debug:fetch Pinging voxel.dl.sourceforge.net...
> :debug:fetch Pinging waix.dl.sourceforge.net...
> :debug:fetch Pinging distfiles.macports.org...
> :debug:fetch Pinging aarnet.au.distfiles.macports.org...
> :debug:fetch Pinging her.gr.distfiles.macports.org...
> :debug:fetch Pinging jog.id.distfiles.macports.org...
> :debug:fetch Pinging lil.fr.distfiles.macports.org...
> :debug:fetch Pinging sea.us.distfiles.macports.org...
> :debug:fetch Pinging ykf.ca.distfiles.macports.org...
> :debug:fetch downloads.sourceforge.net ping time is 177.235
> :debug:fetch aarnet.dl.sourceforge.net ping time is 323.167
> :debug:fetch biznetnetworks.dl.sourceforge.net ping time is 124.251
> :debug:fetch cdnetworks-us-1.dl.sourceforge.net ping time is 156.548
> :debug:fetch cdnetworks-us-2.dl.sourceforge.net ping time is 153.061
> :debug:fetch cdnetworks-kr-1.dl.sourceforge.net ping time is 71.562
> :debug:fetch cdnetworks-kr-2.dl.sourceforge.net ping time is 75.122
> :debug:fetch citylan.dl.sourceforge.net ping time is 319.386
> :debug:fetch dfn.dl.sourceforge.net ping time is 296.413
> :debug:fetch fastbull.dl.sourceforge.net ping time is 305.353
> :debug:fetch freefr.dl.sourceforge.net ping time is 283.765
> :debug:fetch garr.dl.sourceforge.net ping time is 289.900
> :debug:fetch heanet.dl.sourceforge.net ping time is 297.861
> :debug:fetch hivelocity.dl.sourceforge.net ping time is 203.171
> :debug:fetch ignum.dl.sourceforge.net ping time is 311.838
> :debug:fetch internode.dl.sourceforge.net ping time is 287.285
> :debug:fetch iweb.dl.sourceforge.net ping time is 215.624
> :debug:fetch jaist.dl.sourceforge.net ping time is 56.043
> :debug:fetch kent.dl.sourceforge.net ping time is 270.223
> :debug:fetch mesh.dl.sourceforge.net ping time is 288.895
> :debug:fetch nchc.dl.sourceforge.net ping time is 68.106
> :debug:fetch ncu.dl.sourceforge.net ping time is 10000
> :debug:fetch netcologne.dl.sourceforge.net ping time is 10000
> :debug:fetch puzzle.dl.sourceforge.net ping time is 270.460
> :debug:fetch softlayer.dl.sourceforge.net ping time is 175.226
> :debug:fetch space.dl.sourceforge.net ping time is 427.125
> :debug:fetch sunet.dl.sourceforge.net ping time is 303.011
> :debug:fetch surfnet.dl.sourceforge.net ping time is 270.697
> :debug:fetch switch.dl.sourceforge.net ping time is 258.306
> :debug:fetch transact.dl.sourceforge.net ping time is 274.263
> :debug:fetch ufpr.dl.sourceforge.net ping time is 298.331
> :debug:fetch voxel.dl.sourceforge.net ping time is 116.466
> :debug:fetch waix.dl.sourceforge.net ping time is 327.959
> :debug:fetch distfiles.macports.org ping time is 152.150
> :debug:fetch aarnet.au.distfiles.macports.org ping time is 217.484
> :debug:fetch her.gr.distfiles.macports.org ping time is 319.450
> :debug:fetch jog.id.distfiles.macports.org ping time is 184.146
> :debug:fetch lil.fr.distfiles.macports.org ping time is 257.124
> :debug:fetch sea.us.distfiles.macports.org ping time is 10000
> :debug:fetch ykf.ca.distfiles.macports.org ping time is 187.266
> :notice:fetch --->  Attempting to fetch ntop-3.3.10.tar.gz from
> http://jaist.dl.sourceforge.net/ntop
> :debug:fetch Privilege de-escalation not attempted as not running as
> root.
> :debug:checksum checksum phase started at Thu Jan  5 12:13:20 JST 2012
> :notice:checksum --->  Verifying checksum(s) for ntop
> :debug:checksum Executing org.macports.checksum (ntop)
> :info:checksum --->  Checksumming ntop-3.3.10.tar.gz
> :debug:checksum Correct (md5) checksum for ntop-3.3.10.tar.gz
> :debug:checksum Privilege de-escalation not attempted as not running as
> root.
> :debug:extract extract phase started at Thu Jan  5 12:13:20 JST 2012
> :notice:extract --->  Extracting ntop
> :debug:extract Executing org.macports.extract (ntop)
> :info:extract --->  Extracting ntop-3.3.10.tar.gz
> :debug:extract setting option extract.args to
> '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz'
> :debug:extract Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.6'
> :debug:extract Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work"
> && /usr/bin/gzip -dc
> '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz' |
> /usr/bin/gnutar --no-same-owner -xf -'
> :debug:extract Executing command line:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work"
> && /usr/bin/gzip -dc
> '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz' |
> /usr/bin/gnutar --no-same-owner -xf -
> :debug:extract euid/egid changed to: 0/0
> :debug:extract chowned
> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work
> to macports
> :debug:extract euid/egid changed to: 505/502
> :debug:extract Privilege de-escalation not attempted as not running as
> root.
> :debug:patch patch phase started at Thu Jan  5 12:13:21 JST 2012
> :debug:patch Executing org.macports.patch (ntop)
> :notice:patch --->  Applying patches to ntop
> :info:patch --->  Applying
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files
> /patch-external-geoip.diff
> :debug:patch Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.6'
> :debug:patch Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && /usr/bin/patch -p0'
> :debug:patch Executing command line:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && /usr/bin/patch -p0 <
> '/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files
> /patch-external-geoip.diff'
> :info:patch patching file configure.in
> :info:patch --->  Applying
> /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files
> /patch-Makefile.am.diff
> :debug:patch Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.6'
> :debug:patch Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && /usr/bin/patch -p0'
> :debug:patch Executing command line:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && /usr/bin/patch -p0 <
> '/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files
> /patch-Makefile.am.diff'
> :info:patch patching file Makefile.am
> :debug:patch Privilege de-escalation not attempted as not running as
> root.
> :debug:configure configure phase started at Thu Jan  5 12:13:21 JST 2012
> :notice:configure --->  Configuring ntop
> :debug:configure Using compiler 'Mac OS X clang'
> :debug:configure Executing proc-pre-org.macports.configure-configure-0
> :info:configure
> :info:configure Starting ntop automatic configuration system v.0.2.3
> :info:configure
> :info:configure   Please be patient, there is a lot to do...
> :info:configure
> :info:configure ....Adding fix for OSX
> :info:configure 1. Testing gnu tools....
> :info:configure     libtool ..... 2.4.2
> :info:configure         .... ok
> :info:configure     automake .... 1.11.2
> :info:configure         .... ok
> :info:configure     autoconf .... 2.68
> :info:configure         .... ok
> :info:configure
> :info:configure 2. Preparing for libtool ....
> :info:configure glibtoolize: putting auxiliary files in
> AC_CONFIG_AUX_DIR, `.'.
> :info:configure glibtoolize: copying file `./ltmain.sh'
> :info:configure glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
> :info:configure glibtoolize: copying file `m4/libtool.m4'
> :info:configure glibtoolize: copying file `m4/ltoptions.m4'
> :info:configure glibtoolize: copying file `m4/ltsugar.m4'
> :info:configure glibtoolize: copying file `m4/ltversion.m4'
> :info:configure glibtoolize: copying file `m4/lt~obsolete.m4'
> :info:configure glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS
> in Makefile.am.
> :info:configure     Finding libtool.m4.in
> :info:configure         .... found /usr/share/aclocal/libtool.m4
> :info:configure         .... done
> :info:configure
> :info:configure 3. Create acinclude.m4, local definitions for automake
> ...
> :info:configure         .... done
> :info:configure
> :info:configure 4. Running aclocal to create aclocal.m4 ...
> :info:configure acinclude.m4:238: the serial number must appear before
> any macro definition
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
> from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure         .... done
> :info:configure
> :info:configure 5. Running autoheader to create config.h.in ...
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
> from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure         .... done
> :info:configure
> :info:configure 6. Running automake to create Makefile.in ...
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
> from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure configure.in:105: installing `./config.guess'
> :info:configure Makefile.am:119: compiling `main.c' with per-target flags
> requires `AM_PROG_CC_C_O' in `configure.in'
> :info:configure         .... done
> :info:configure
> :info:configure 7. Running autoconf to create configure ...
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
> from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure         .... done
> :info:configure
> :info:configure 8. Skipping ./configure
> :info:configure Run ./configure and then make to compile ntop
> :info:configure
> :debug:configure Executing org.macports.configure (ntop)
> :debug:configure Environment: CPATH='/opt/local/include'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
> LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
> MACOSX_DEPLOYMENT_TARGET='10.6'
> :debug:configure Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && autoconf'
> :debug:configure Executing command line:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && autoconf
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
> from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
> AC_LANG_SOURCE call detected in body
> :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
> expanded from...
> :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
> expanded from...
> :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
> :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
> :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
> :info:configure acinclude.m4:265: LT_INIT is expanded from...
> :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
> :info:configure configure.in:169: the top level
> :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe
> -O2 -I/opt/local/include -arch x86_64' CPPFLAGS='-I/opt/local/include'
> CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib'
> MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/Developer/usr/bin/clang++'
> CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
> F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
> OBJC='/Developer/usr/bin/clang' FCFLAGS='-pipe -O2 -m64'
> INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64'
> FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES'
> CC='/Developer/usr/bin/clang'
> :debug:configure Assembled command: 'cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-
> localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-
> ssl'
> :debug:configure Executing command line:  cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-
> localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-
> ssl
> :info:configure configure: WARNING: unrecognized options: --with-
> localedir
> :info:configure
> :info:configure Welcome to ntop, Version 3.3.10
> :info:configure   copyright (c) 1998-2009 Luca Deri <deri at ntop.org>
> :info:configure
> :info:configure Configuration script version v3.3.10-06-01-2009
> :info:configure
> :info:configure
> ************************************************************************
> :info:configure *
> *
> :info:configure * NOTICE:  I know you're used to ignoring output from
> ./configure      *
> :info:configure *
> *
> :info:configure *          ntop has a lot of complexity and
> interdependences.          *
> :info:configure *
> *
> :info:configure *          Please, please AT LEAST read the stuff in
> these boxes!      *
> :info:configure *
> *
> :info:configure *>>> The ACTION taken by ./configure is shown prefixed
> with '>>>'      *
> :info:configure *
> *
> :info:configure *    If that ACTION is unacceptable,
> *
> :info:configure *??? Steps to take to fix the problem are shown, prefixed
> with '???'   *
> :info:configure *
> *
> :info:configure
> ************************************************************************
> :info:configure
> :info:configure NOTE:
> :info:configure
> :info:configure        To enable additional, debugging messages during
> the ./configure
> :info:configure        execution, do this before running ./configure:
> :info:configure
> :info:configure $ export NTOPCONFIGDEBUG=yes
> :info:configure
> :info:configure
> :info:configure Configuring ntop according to your request(s):
> :info:configure    ./configure --prefix=/opt/local
> --mandir=/opt/local/share/man --with-localedir=/opt/local/share/locale
> --with-rrd-home=/opt/local --without-ssl
> :info:configure
> :info:configure checking build system type... x86_64-apple-darwin10.8.0
> :info:configure checking host system type... x86_64-apple-darwin10.8.0
> :info:configure checking target system type... x86_64-apple-darwin10.8.0
> :info:configure checking for a BSD-compatible install... /usr/bin/install
> -c
> :info:configure checking whether build environment is sane... yes
> :info:configure checking for a thread-safe mkdir -p...
> /opt/local/bin/gmkdir -p
> :info:configure checking for gawk... gawk
> :info:configure checking whether make sets $(MAKE)... yes
> :info:configure checking for style of include used by make... GNU
> :info:configure checking for gcc... /Developer/usr/bin/clang
> :info:configure checking whether the C compiler works... yes
> :info:configure checking for C compiler default output file name... a.out
> :info:configure checking for suffix of executables...
> :info:configure checking whether we are cross compiling... no
> :info:configure checking for suffix of object files... o
> :info:configure checking whether we are using the GNU C compiler... yes
> :info:configure checking whether /Developer/usr/bin/clang accepts -g...
> yes
> :info:configure checking for /Developer/usr/bin/clang option to accept
> ISO C89... none needed
> :info:configure checking dependency style of /Developer/usr/bin/clang...
> gcc3
> :info:configure checking how to run the C preprocessor...
> /Developer/usr/bin/clang -E
> :info:configure checking for gcc... (cached) /Developer/usr/bin/clang
> :info:configure checking whether we are using the GNU C compiler...
> (cached) yes
> :info:configure checking whether /Developer/usr/bin/clang accepts -g...
> (cached) yes
> :info:configure checking for /Developer/usr/bin/clang option to accept
> ISO C89... (cached) none needed
> :info:configure checking dependency style of /Developer/usr/bin/clang...
> (cached) gcc3
> :info:configure checking whether ln -s works... yes
> :info:configure checking whether make sets $(MAKE)... (cached) yes
> :info:configure checking how to print strings... printf
> :info:configure checking for a sed that does not truncate output...
> /usr/bin/sed
> :info:configure checking for grep that handles long lines and -e...
> /usr/bin/grep
> :info:configure checking for egrep... /usr/bin/grep -E
> :info:configure checking for fgrep... /usr/bin/grep -F
> :info:configure checking for ld used by /Developer/usr/bin/clang...
> /Developer/usr/bin/ld
> :info:configure checking if the linker (/Developer/usr/bin/ld) is GNU
> ld... no
> :info:configure checking for BSD- or MS-compatible name lister (nm)...
> /usr/bin/nm
> :info:configure checking the name lister (/usr/bin/nm) interface... BSD
> nm
> :info:configure checking the maximum length of command line arguments...
> 196608
> :info:configure checking whether the shell understands some XSI
> constructs... yes
> :info:configure checking whether the shell understands "+="... yes
> :info:configure checking for /Developer/usr/bin/ld option to reload
> object files... -r
> :info:configure checking for objdump... no
> :info:configure checking how to recognize dependent libraries... pass_all
> :info:configure checking for ar... ar
> :info:configure checking for strip... strip
> :info:configure checking for ranlib... ranlib
> :info:configure checking command to parse /usr/bin/nm output from
> /Developer/usr/bin/clang object... ok
> :info:configure checking for dsymutil... dsymutil
> :info:configure checking for nmedit... nmedit
> :info:configure checking for lipo... lipo
> :info:configure checking for otool... otool
> :info:configure checking for otool64... otool64
> :info:configure checking for -single_module linker flag... yes
> :info:configure checking for -exported_symbols_list linker flag... yes
> :info:configure checking for -force_load linker flag... yes
> :info:configure checking for ANSI C header files... yes
> :info:configure checking for sys/types.h... yes
> :info:configure checking for sys/stat.h... yes
> :info:configure checking for stdlib.h... yes
> :info:configure checking for string.h... yes
> :info:configure checking for memory.h... yes
> :info:configure checking for strings.h... yes
> :info:configure checking for inttypes.h... yes
> :info:configure checking for stdint.h... yes
> :info:configure checking for unistd.h... yes
> :info:configure checking for dlfcn.h... yes
> :info:configure checking for objdir... .libs
> :info:configure checking if /Developer/usr/bin/clang supports -fno-rtti
> -fno-exceptions... yes
> :info:configure checking for /Developer/usr/bin/clang option to produce
> PIC... -fno-common -DPIC
> :info:configure checking if /Developer/usr/bin/clang PIC flag -fno-common
> -DPIC works... yes
> :info:configure checking if /Developer/usr/bin/clang static flag -static
> works... no
> :info:configure checking if /Developer/usr/bin/clang supports -c -o
> file.o... yes
> :info:configure checking if /Developer/usr/bin/clang supports -c -o
> file.o... (cached) yes
> :info:configure checking whether the /Developer/usr/bin/clang linker
> (/Developer/usr/bin/ld) supports shared libraries... yes
> :info:configure checking dynamic linker characteristics... darwin10.8.0
> dyld
> :info:configure checking how to hardcode library paths into programs...
> immediate
> :info:configure checking whether stripping libraries is possible... yes
> :info:configure checking if libtool supports shared libraries... yes
> :info:configure checking whether to build shared libraries... yes
> :info:configure checking whether to build static libraries... yes
> :info:configure checking for aclocal.m4... yes
> :info:configure checking for depcomp... yes
> :info:configure checking for library containing gethostbyname... none
> required
> :info:configure checking for library containing socket... none required
> :info:configure
> :info:configure Checking C compiler program and features...
> :info:configure
> :info:configure checking for gcc... (cached) /Developer/usr/bin/clang
> :info:configure checking whether we are using the GNU C compiler...
> (cached) yes
> :info:configure checking whether /Developer/usr/bin/clang accepts -g...
> (cached) yes
> :info:configure checking for /Developer/usr/bin/clang option to accept
> ISO C89... (cached) none needed
> :info:configure checking dependency style of /Developer/usr/bin/clang...
> (cached) gcc3
> :info:configure
> :info:configure
> *******************************************************************
> :info:configure *
> :info:configure * Checking for unique options for x86_64-apple-
> darwin10.8.0, /Developer/usr/bin/clang...
> :info:configure *
> :info:configure * This appears to be DARWIN (MacOSX)
> :info:configure *
> :info:configure *   Testing for extra configuration options for DARWIN
> :info:configure *
> :info:configure *    Executing configureextra/DARWIN
> :info:configure         Setting Darwin (Mac OS X) specific flag values
> :info:configure *
> :info:configure
> *******************************************************************
> :info:configure
> :info:configure Test the compiler and setup CFLAGS...
> :info:configure
> :info:configure checking if compiler accepts -g (debugging
> information)... yes
> :info:configure checking if compiler accepts -W (warning flags)... yes
> :info:configure
> :info:configure Critical library/include tests...
> :info:configure
> :info:configure found in standard OSX installation
> :info:configure checking for pcap_next_ex in -lpcap... yes
> :info:configure checking for gdbm...
> :info:configure checking gdbm.h usability... yes
> :info:configure checking gdbm.h presence... yes
> :info:configure checking for gdbm.h... yes
> :info:configure checking for gdbm_open in -lgdbm... yes
> :info:configure checking for pcre_refcount in -lpcre... yes
> :info:configure
> :info:configure
> -------------------------------------------------------------------
> :info:configure
> :info:configure    **Handling your --enable and --disable requests**
> :info:configure
> :info:configure
> :info:configure SSL?
> :info:configure     ...Disabled via ./configure command line option
> --without-ssl
> :info:configure
> :info:configure TCP Wrappers?
> :info:configure     ...(Default) Disabled. Request via ./configure
> command line option --with-tcpwrap.
> :info:configure
> :info:configure Plugins?
> :info:configure     ...(Default) Requested. Disable via ./configure
> command line option --disable-plugins.
> :info:configure
> :info:configure Jumbo (9k) Ethernet Frames?
> :info:configure     ...(Default) Disabled. Request via ./configure
> command line option --enable-jumbo-frames.
> :info:configure
> :info:configure Processing the rest of the ROOT/DIRECTORY entries
> :info:configure
> :info:configure
> :info:configure
> *******************************************************************
> :info:configure *
> :info:configure * WARNING:  You specified a non-existent directory for
> locale files
> :info:configure *                  --with-localedir=/usr/lib/locale
> :info:configure *
> :info:configure *>>> Since we just pass this through to the run-time,
> we're only
> :info:configure *>>> going to warn you here, but ntop might or might not
> function
> :info:configure *>>> as expected.
> :info:configure *
> :info:configure *???     1. Correct the --with-localedir option and rerun
> :info:configure *???        ./configure
> :info:configure *
> :info:configure
> *******************************************************************
> :info:configure
> :info:configure checking for an ANSI C-conforming const... yes
> :info:configure checking for working volatile... yes
> :info:configure checking for inline... inline
> :info:configure checking whether char is unsigned... no
> :info:configure checking for long double with more range or precision
> than double... yes
> :info:configure checking whether byte ordering is bigendian... no
> :info:configure
> :info:configure Testing headers and functions...
> :info:configure
> :info:configure checking for ANSI C header files... (cached) yes
> :info:configure checking for dirent.h that defines DIR... yes
> :info:configure checking for library containing opendir... none required
> :info:configure checking for sys/wait.h that is POSIX.1 compatible... yes
> :info:configure checking whether time.h and sys/time.h may both be
> included... yes
> :info:configure checking float.h usability... yes
> :info:configure checking float.h presence... yes
> :info:configure checking for float.h... yes
> :info:configure checking stddef.h usability... yes
> :info:configure checking stddef.h presence... yes
> :info:configure checking for stddef.h... yes
> :info:configure checking for stdlib.h... (cached) yes
> :info:configure checking for string.h... (cached) yes
> :info:configure checking pcre.h usability... yes
> :info:configure checking pcre.h presence... yes
> :info:configure checking for pcre.h... yes
> :info:configure checking errno.h usability... yes
> :info:configure checking errno.h presence... yes
> :info:configure checking for errno.h... yes
> :info:configure checking fcntl.h usability... yes
> :info:configure checking fcntl.h presence... yes
> :info:configure checking for fcntl.h... yes
> :info:configure checking limits.h usability... yes
> :info:configure checking limits.h presence... yes
> :info:configure checking for limits.h... yes
> :info:configure checking math.h usability... yes
> :info:configure checking math.h presence... yes
> :info:configure checking for math.h... yes
> :info:configure checking signal.h usability... yes
> :info:configure checking signal.h presence... yes
> :info:configure checking for signal.h... yes
> :info:configure checking stdarg.h usability... yes
> :info:configure checking stdarg.h presence... yes
> :info:configure checking for stdarg.h... yes
> :info:configure checking for unistd.h... (cached) yes
> :info:configure checking stdio.h usability... yes
> :info:configure checking stdio.h presence... yes
> :info:configure checking for stdio.h... yes
> :info:configure checking for strings.h... (cached) yes
> :info:configure checking sys/ioctl.h usability... yes
> :info:configure checking sys/ioctl.h presence... yes
> :info:configure checking for sys/ioctl.h... yes
> :info:configure checking sys/socket.h usability... yes
> :info:configure checking sys/socket.h presence... yes
> :info:configure checking for sys/socket.h... yes
> :info:configure checking sys/time.h usability... yes
> :info:configure checking sys/time.h presence... yes
> :info:configure checking for sys/time.h... yes
> :info:configure checking for sys/types.h... (cached) yes
> :info:configure checking setjmp.h usability... yes
> :info:configure checking setjmp.h presence... yes
> :info:configure checking for setjmp.h... yes
> :info:configure checking ieeefp.h usability... no
> :info:configure checking ieeefp.h presence... no
> :info:configure checking for ieeefp.h... no
> :info:configure checking shadow.h usability... no
> :info:configure checking shadow.h presence... no
> :info:configure checking for shadow.h... no
> :info:configure checking sys/utsname.h usability... yes
> :info:configure checking sys/utsname.h presence... yes
> :info:configure checking for sys/utsname.h... yes
> :info:configure checking netinet/in.h usability... yes
> :info:configure checking netinet/in.h presence... yes
> :info:configure checking for netinet/in.h... yes
> :info:configure checking arpa/inet.h usability... yes
> :info:configure checking arpa/inet.h presence... yes
> :info:configure checking for arpa/inet.h... yes
> :info:configure checking arpa/nameser.h usability... yes
> :info:configure checking arpa/nameser.h presence... yes
> :info:configure checking for arpa/nameser.h... yes
> :info:configure checking net/ethernet.h usability... yes
> :info:configure checking net/ethernet.h presence... yes
> :info:configure checking for net/ethernet.h... yes
> :info:configure checking for zlibVersion in -lz... yes
> :info:configure checking for event_get_version in -levent... yes
> :info:configure checking for RRD home... yes
> :info:configure checking for rrdtool... yes
> :info:configure checking for net/if.h... yes
> :info:configure checking net/if_dl.h usability... yes
> :info:configure checking net/if_dl.h presence... yes
> :info:configure checking for net/if_dl.h... yes
> :info:configure checking for netinet/if_ether.h... yes
> :info:configure checking netinet/in_systm.h usability... yes
> :info:configure checking netinet/in_systm.h presence... yes
> :info:configure checking for netinet/in_systm.h... yes
> :info:configure checking for netinet/ip.h... yes
> :info:configure checking for netinet/ip_icmp.h... yes
> :info:configure checking netinet/tcp.h usability... yes
> :info:configure checking netinet/tcp.h presence... yes
> :info:configure checking for netinet/tcp.h... yes
> :info:configure checking for netinet/udp.h... yes
> :info:configure checking sys/param.h usability... yes
> :info:configure checking sys/param.h presence... yes
> :info:configure checking for sys/param.h... yes
> :info:configure checking for net/if_dl.h... (cached) yes
> :info:configure checking for sys/sysctl.h... yes
> :info:configure checking for net/route.h... yes
> :info:configure checking ethertype.h usability... no
> :info:configure checking ethertype.h presence... no
> :info:configure checking for ethertype.h... no
> :info:configure checking net/ppp_defs.h usability... no
> :info:configure checking net/ppp_defs.h presence... no
> :info:configure checking for net/ppp_defs.h... no
> :info:configure checking for linux/if_pppox.h... no
> :info:configure checking crypt.h usability... no
> :info:configure checking crypt.h presence... no
> :info:configure checking for crypt.h... no
> :info:configure checking pwd.h usability... yes
> :info:configure checking pwd.h presence... yes
> :info:configure checking for pwd.h... yes
> :info:configure checking security/pam_appl.h usability... yes
> :info:configure checking security/pam_appl.h presence... yes
> :info:configure checking for security/pam_appl.h... yes
> :info:configure checking for shadow.h... (cached) no
> :info:configure checking dirent.h usability... yes
> :info:configure checking dirent.h presence... yes
> :info:configure checking for dirent.h... yes
> :info:configure checking for dlfcn.h... (cached) yes
> :info:configure checking dl.h usability... no
> :info:configure checking dl.h presence... no
> :info:configure checking for dl.h... no
> :info:configure checking getopt.h usability... yes
> :info:configure checking getopt.h presence... yes
> :info:configure checking for getopt.h... yes
> :info:configure checking if.h usability... no
> :info:configure checking if.h presence... no
> :info:configure checking for if.h... no
> :info:configure checking for inttypes.h... (cached) yes
> :info:configure checking for memory.h... (cached) yes
> :info:configure checking sys/ldr.h usability... no
> :info:configure checking sys/ldr.h presence... no
> :info:configure checking for sys/ldr.h... no
> :info:configure checking for sys/param.h... (cached) yes
> :info:configure checking sys/select.h usability... yes
> :info:configure checking sys/select.h presence... yes
> :info:configure checking for sys/select.h... yes
> :info:configure checking sys/sockio.h usability... yes
> :info:configure checking sys/sockio.h presence... yes
> :info:configure checking for sys/sockio.h... yes
> :info:configure checking for sys/stat.h... (cached) yes
> :info:configure checking sys/un.h usability... yes
> :info:configure checking sys/un.h presence... yes
> :info:configure checking for sys/un.h... yes
> :info:configure checking for sys/wait.h... (cached) yes
> :info:configure checking zlib.h usability... yes
> :info:configure checking zlib.h presence... yes
> :info:configure checking for zlib.h... yes
> :info:configure checking sched.h usability... yes
> :info:configure checking sched.h presence... yes
> :info:configure checking for sched.h... yes
> :info:configure checking sys/sched.h usability... no
> :info:configure checking sys/sched.h presence... no
> :info:configure checking for sys/sched.h... no
> :info:configure checking pthread.h usability... yes
> :info:configure checking pthread.h presence... yes
> :info:configure checking for pthread.h... yes
> :info:configure checking sys/syslog.h usability... yes
> :info:configure checking sys/syslog.h presence... yes
> :info:configure checking for sys/syslog.h... yes
> :info:configure checking syslog.h usability... yes
> :info:configure checking syslog.h presence... yes
> :info:configure checking for syslog.h... yes
> :info:configure checking tcpd.h usability... yes
> :info:configure checking tcpd.h presence... yes
> :info:configure checking for tcpd.h... yes
> :info:configure checking ip6.h usability... no
> :info:configure checking ip6.h presence... no
> :info:configure checking for ip6.h... no
> :info:configure checking icmp6.h usability... no
> :info:configure checking icmp6.h presence... no
> :info:configure checking for icmp6.h... no
> :info:configure checking for netinet/ip6.h... yes
> :info:configure checking for netinet/icmp6.h... yes
> :info:configure checking for sysctl... yes
> :info:configure checking for finite... yes
> :info:configure checking for isinf... yes
> :info:configure checking for pid_t... yes
> :info:configure checking for size_t... yes
> :info:configure checking whether time.h and sys/time.h may both be
> included... (cached) yes
> :info:configure checking whether struct tm is in sys/time.h or time.h...
> time.h
> :info:configure checking for struct tm.tm_zone... yes
> :info:configure checking for typedef u_int64_t... yes
> :info:configure checking for typedef uint64_t... no
> :info:configure checking for typedef u_int32_t... yes
> :info:configure checking for typedef u_int16_t... yes
> :info:configure checking for typedef u_int8_t... yes
> :info:configure checking for typedef int64_t... yes
> :info:configure checking for typedef int32_t... yes
> :info:configure checking for typedef int16_t... yes
> :info:configure checking for typedef int8_t... yes
> :info:configure checking for backtrace in -lc... yes
> :info:configure checking for crypt in -lc... yes
> :info:configure checking for crypt_get_format_get_format in -lc... no
> :info:configure checking for crypt_get_format in -lcrypt... no
> :info:configure checking for getopt_long in -lc... yes
> :info:configure checking for dlopen in -lc... yes
> :info:configure checking for dladdr (GNU extension)... yes
> :info:configure checking for sin in -lc... yes
> :info:configure checking for ceil in -lc... yes
> :info:configure checking for pthread_create in -lpthread... yes
> :info:configure checking for sem_init in -lposix4... no
> :info:configure checking vfork.h usability... no
> :info:configure checking vfork.h presence... no
> :info:configure checking for vfork.h... no
> :info:configure checking for fork... yes
> :info:configure checking for vfork... yes
> :info:configure checking for working fork... yes
> :info:configure checking for working vfork... (cached) yes
> :info:configure checking whether /Developer/usr/bin/clang needs
> -traditional... no
> :info:configure checking for working memcmp... yes
> :info:configure checking return type of signal handlers... void
> :info:configure checking whether lstat correctly handles trailing
> slash... no
> :info:configure checking whether stat accepts an empty string... no
> :info:configure checking for strftime... yes
> :info:configure checking for alarm... yes
> :info:configure checking for endpwent... yes
> :info:configure checking for gethostbyaddr... yes
> :info:configure checking for gethostbyname... yes
> :info:configure checking for gethostname... yes
> :info:configure checking for gethostbyaddr_r... no
> :info:configure checking for getpass... yes
> :info:configure checking for gettimeofday... yes
> :info:configure checking for localtime_r... yes
> :info:configure checking for memchr... yes
> :info:configure checking for memset... yes
> :info:configure checking for putenv... yes
> :info:configure checking for sched_yield... yes
> :info:configure checking for select... yes
> :info:configure checking for socket... yes
> :info:configure checking for snprintf... yes
> :info:configure checking for sqrtf... yes
> :info:configure checking for strcasecmp... yes
> :info:configure checking for strncasecmp... yes
> :info:configure checking for strcasestr... yes
> :info:configure checking for strchr... yes
> :info:configure checking for strrchr... yes
> :info:configure checking for strcspn... yes
> :info:configure checking for strdup... yes
> :info:configure checking for strerror... yes
> :info:configure checking for strpbrk... yes
> :info:configure checking for strsignal... yes
> :info:configure checking for strspn... yes
> :info:configure checking for strstr... yes
> :info:configure checking for strtoul... yes
> :info:configure checking for uname... yes
> :info:configure checking for strtok_r... yes
> :info:configure
> :info:configure Now, let's check for problems with what we've found...
> :info:configure
> :info:configure    Testing Required libraries and headers**
> :info:configure
> :info:configure checking for required C headers... ok
> :info:configure checking for crypt... ok
> :info:configure checking for dynamic load module... skipping - ntop
> emulates function in ntop_darwin.c
> :info:configure
> :info:configure
> -------------------------------------------------------------------
> :info:configure
> :info:configure    **Testing Optional libraries and headers**
> :info:configure
> :info:configure checking for Multithreading... ok
> :info:configure checking for zlib... ok
> :info:configure checking for perl... perl
> :info:configure checking whether perl development environment is
> present... yes
> :info:configure --2012-01-05 12:13:39--
> http://www.lua.org/ftp/lua-5.1.4.tar.gz
> :info:configure Resolving www.lua.org (www.lua.org)... 2a02:40:41::5
> :info:configure Connecting to www.lua.org
> (www.lua.org)|2a02:40:41::5|:80... failed: No route to host.
> :info:configure tar: Error opening archive: Failed to open
> 'lua-5.1.4.tar.gz': No such file or directory
> :info:configure cat: lua-5.1.4/src/Makefile: No such file or directory
> :info:configure ./configure: line 18318: lua-5.1.4/src/Makefile: No such
> file or directory
> :info:configure ./configure: line 18320: cd: lua-5.1.4: No such file or
> directory
> :info:configure make: *** No rule to make target `posix'.  Stop.
> :info:configure checking sctp... no
> :info:configure checking pthread_atfork... no
> :info:configure
> :info:configure Miscelaneous settings...
> :info:configure
> :info:configure checking for gcc backtrace... found - automatic SIGSEGV
> backtrace enabled via -K
> :info:configure checking for gcc getopt_long... found - long command line
> options are enabled
> :info:configure checking for facilitynames - define SYSLOG_NAMES
> option... unavailable
> :info:configure checking if ether_header uses ether_addr structs... no
> :info:configure checking if in6_addr is defined for sFlowPlugin... yes
> :info:configure
> :info:configure
> -------------------------------------------------------------------
> :info:configure
> :info:configure Removing dups and misplaced entries from LIBS and INCS...
> :info:configure checking GeoIP.h usability... yes
> :info:configure checking GeoIP.h presence... yes
> :info:configure checking for GeoIP.h... yes
> :info:configure checking for GeoIP_open in -lGeoIP... no
> :info:configure configure: error: in
> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10':
> :info:configure configure: error: GeoIP library is missing
> :info:configure See `config.log' for more details
> :info:configure shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
> && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-
> localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-
> ssl " returned error 1
> :error:configure Target org.macports.configure returned: configure
> failure: shell command failed (see log for details)
> :debug:configure Backtrace: configure failure: shell command failed (see
> log for details)
>     while executing
> "$procedure $targetname"
> :info:configure Warning: the following items did not execute (for ntop):
> org.macports.activate org.macports.configure org.macports.build
> org.macports.destroot org.macports.install
> :notice:configure Log for ntop is at:
> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/main.log

New description:

 Below a log for ntop.

 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libevent 2.0.16_0 exists in the ports tree
 :debug:main libevent 2.0.16_0  is the latest installed
 :debug:main libevent 2.0.16_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libevent
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libevent 2.0.16_0 >= libevent 2.0.16_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main autoconf 2.68_2 exists in the ports tree
 :debug:main autoconf 2.68_2  is the latest installed
 :debug:main autoconf 2.68_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.12.3_1 exists in the ports tree
 :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
 :debug:main perl5 5.12.3_1 +perl5_12 is active
 :debug:main Merging existing variants '+perl5_12' into variants
 :debug:main new fully merged portvariants: perl5_12 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Executing variant perl5_12 provides perl5_12
 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.12 5.12.3_3 exists in the ports tree
 :debug:main perl5.12 5.12.3_3  is the latest installed
 :debug:main perl5.12 5.12.3_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.10_1 exists in the ports tree
 :debug:main gdbm 1.10_1  is the latest installed
 :debug:main gdbm 1.10_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2  is the latest installed
 :debug:main gettext 0.18.1.1_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.14_0 exists in the ports tree
 :debug:main libiconv 1.14_0  is the latest installed
 :debug:main libiconv 1.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_1 exists in the ports tree
 :debug:main ncurses 5.9_1  is the latest installed
 :debug:main ncurses 5.9_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_1 exists in the ports tree
 :debug:main expat 2.0.1_1  is the latest installed
 :debug:main expat 2.0.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main m4 1.4.16_0 exists in the ports tree
 :debug:main m4 1.4.16_0  is the latest installed
 :debug:main m4 1.4.16_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main help2man 1.40.4_1 exists in the ports tree
 :debug:main help2man 1.40.4_1  is the latest installed
 :debug:main help2man 1.40.4_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
 :debug:main p5.12-locale-gettext 1.50.0_6  is the latest installed
 :debug:main p5.12-locale-gettext 1.50.0_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for livecheck.version
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12
 -locale-gettext 1.50.0_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main automake 1.11.2_0 exists in the ports tree
 :debug:main automake 1.11.2_0  is the latest installed
 :debug:main automake 1.11.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! automake 1.11.2_0 >= automake 1.11.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libtool 2.4.2_0 exists in the ports tree
 :debug:main libtool 2.4.2_0  is the latest installed
 :debug:main libtool 2.4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpng 1.4.8_0 exists in the ports tree
 :debug:main libpng 1.4.8_0  is the latest installed
 :debug:main libpng 1.4.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.5_0 exists in the ports tree
 :debug:main zlib 1.2.5_0  is the latest installed
 :debug:main zlib 1.2.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 :msg:main --->  Computing dependencies for ntop:info:main .:debug:main
 Searching for dependency: gawk
 :debug:main Didn't find receipt, going to depspec regex for: gawk
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Searching for dependency: wget
 :debug:main Didn't find receipt, going to depspec regex for: wget
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/wget
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant ssl provides ssl
 :debug:main Searching for dependency: rrdtool
 :debug:main Didn't find receipt, going to depspec regex for: rrdtool
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rrdtool
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Searching for dependency: libevent
 :debug:main Found Dependency: receipt exists for libevent
 :debug:main Searching for dependency: autoconf
 :debug:main Found Dependency: receipt exists for autoconf
 :debug:main Searching for dependency: automake
 :debug:main Found Dependency: receipt exists for automake
 :debug:main Searching for dependency: libtool
 :debug:main Found Dependency: receipt exists for libtool
 :debug:main Searching for dependency: libpcap
 :debug:main Didn't find receipt, going to depspec regex for: libpcap
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Searching for dependency: gd2
 :debug:main Didn't find receipt, going to depspec regex for: gd2
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Searching for dependency: libpng
 :debug:main Found Dependency: receipt exists for libpng
 :debug:main Searching for dependency: gdbm
 :debug:main Found Dependency: receipt exists for gdbm
 :debug:main Searching for dependency: libgeoip
 :debug:main Didn't find receipt, going to depspec regex for: libgeoip
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgeoip
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :info:main .:debug:main Searching for dependency: readline
 :debug:main Found Dependency: receipt exists for readline
 :debug:main Searching for dependency: gettext
 :debug:main Found Dependency: receipt exists for gettext
 :info:main .:debug:main Searching for dependency: texinfo
 :debug:main Found Dependency: receipt exists for texinfo
 :debug:main Searching for dependency: perl5
 :debug:main Found Dependency: receipt exists for perl5
 :debug:main Searching for dependency: pkgconfig
 :debug:main Found Dependency: receipt exists for pkgconfig
 :debug:main Searching for dependency: libidn
 :debug:main Found Dependency: receipt exists for libidn
 :debug:main Searching for dependency: gnutls
 :debug:main Found Dependency: receipt exists for gnutls
 :info:main .:debug:main Searching for dependency: expat
 :debug:main Found Dependency: receipt exists for expat
 :debug:main Searching for dependency: glib2
 :debug:main Found Dependency: receipt exists for glib2
 :debug:main Searching for dependency: libiconv
 :debug:main Found Dependency: receipt exists for libiconv
 :debug:main Searching for dependency: pango
 :debug:main Found Dependency: receipt exists for pango
 :debug:main Searching for dependency: perl5
 :debug:main Found Dependency: receipt exists for perl5
 :debug:main Searching for dependency: tcl
 :debug:main Didn't find receipt, going to depspec regex for: tcl
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Searching for dependency: zlib
 :debug:main Found Dependency: receipt exists for zlib
 :debug:main Searching for dependency: libxml2
 :debug:main Found Dependency: receipt exists for libxml2
 :debug:main Searching for dependency: intltool
 :debug:main Found Dependency: receipt exists for intltool
 :info:main .:info:main .:info:main .:debug:main Searching for dependency:
 jpeg
 :debug:main Found Dependency: receipt exists for jpeg
 :debug:main Searching for dependency: freetype
 :debug:main Found Dependency: receipt exists for freetype
 :debug:main Searching for dependency: fontconfig
 :debug:main Found Dependency: receipt exists for fontconfig
 :debug:main Searching for dependency: xpm
 :debug:main Didn't find receipt, going to depspec regex for: xpm
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :info:main .:debug:main Searching for dependency: xorg-xproto
 :debug:main Found Dependency: receipt exists for xorg-xproto
 :debug:main Searching for dependency: xorg-libXt
 :debug:main Found Dependency: receipt exists for xorg-libXt
 :debug:main Searching for dependency: xorg-libXext
 :debug:main Found Dependency: receipt exists for xorg-libXext
 :info:main .:msg:main
 :msg:main --->  Dependencies to be installed: gawk gd2 xpm libgeoip
 libpcap rrdtool tcl wget
 :debug:main Starting logging for gawk
 :debug:clean Starting logging for xpm
 :debug:clean Starting logging for gd2
 :debug:clean Starting logging for libgeoip
 :debug:clean Starting logging for libpcap
 :debug:clean Starting logging for tcl
 :debug:clean Starting logging for rrdtool
 :debug:clean Starting logging for wget
 :debug:main Executing org.macports.main (ntop)
 :debug:main changing euid/egid - current euid: 0 - current egid: 0
 :debug:main egid changed to: 502
 :debug:main euid changed to: 505
 :debug:archivefetch archivefetch phase started at Thu Jan  5 12:11:53 JST
 2012
 :msg:archivefetch --->  Fetching archive for ntop
 :debug:archivefetch Executing org.macports.archivefetch (ntop)
 :debug:archivefetch Can't run archivefetch on this port without elevated
 privileges. Escalating privileges back to root.
 :debug:archivefetch euid changed to: 0. egid changed to: 0.
 :debug:archivefetch changing euid/egid - current euid: 0 - current egid: 0
 :debug:archivefetch egid changed to: 502
 :debug:archivefetch euid changed to: 505
 :info:archivefetch --->  ntop-3.3.10_5.darwin_10.x86_64.tbz2 doesn't seem
 to exist in /opt/local/var/macports/software/ntop
 :msg:archivefetch --->  Attempting to fetch
 ntop-3.3.10_5.darwin_10.x86_64.tbz2 from http://packages.macports.org/ntop
 :debug:archivefetch Fetching archive failed:: The requested URL returned
 error: 404
 :debug:archivefetch Privilege de-escalation not attempted as not running
 as root.
 :debug:fetch fetch phase started at Thu Jan  5 12:11:53 JST 2012
 :notice:fetch --->  Fetching ntop
 :debug:fetch Can't run fetch on this port without elevated privileges.
 Escalating privileges back to root.
 :debug:fetch euid changed to: 0. egid changed to: 0.
 :debug:fetch changing euid/egid - current euid: 0 - current egid: 0
 :debug:fetch egid changed to: 502
 :debug:fetch euid changed to: 505
 :debug:fetch Executing org.macports.fetch (ntop)
 :info:fetch --->  ntop-3.3.10.tar.gz doesn't seem to exist in
 /opt/local/var/macports/distfiles/ntop
 :debug:fetch Pinging downloads.sourceforge.net...
 :debug:fetch Pinging aarnet.dl.sourceforge.net...
 :debug:fetch Pinging biznetnetworks.dl.sourceforge.net...
 :debug:fetch Pinging cdnetworks-us-1.dl.sourceforge.net...
 :debug:fetch Pinging cdnetworks-us-2.dl.sourceforge.net...
 :debug:fetch Pinging cdnetworks-kr-1.dl.sourceforge.net...
 :debug:fetch Pinging cdnetworks-kr-2.dl.sourceforge.net...
 :debug:fetch Pinging citylan.dl.sourceforge.net...
 :debug:fetch Pinging dfn.dl.sourceforge.net...
 :debug:fetch Pinging fastbull.dl.sourceforge.net...
 :debug:fetch Pinging freefr.dl.sourceforge.net...
 :debug:fetch Pinging garr.dl.sourceforge.net...
 :debug:fetch Pinging heanet.dl.sourceforge.net...
 :debug:fetch Pinging hivelocity.dl.sourceforge.net...
 :debug:fetch Pinging ignum.dl.sourceforge.net...
 :debug:fetch Pinging internode.dl.sourceforge.net...
 :debug:fetch Pinging iweb.dl.sourceforge.net...
 :debug:fetch Pinging jaist.dl.sourceforge.net...
 :debug:fetch Pinging kent.dl.sourceforge.net...
 :debug:fetch Pinging mesh.dl.sourceforge.net...
 :debug:fetch Pinging nchc.dl.sourceforge.net...
 :debug:fetch Pinging ncu.dl.sourceforge.net...
 :debug:fetch Pinging netcologne.dl.sourceforge.net...
 :debug:fetch Pinging puzzle.dl.sourceforge.net...
 :debug:fetch Pinging softlayer.dl.sourceforge.net...
 :debug:fetch Pinging space.dl.sourceforge.net...
 :debug:fetch Pinging sunet.dl.sourceforge.net...
 :debug:fetch Pinging surfnet.dl.sourceforge.net...
 :debug:fetch Pinging switch.dl.sourceforge.net...
 :debug:fetch Pinging transact.dl.sourceforge.net...
 :debug:fetch Pinging ufpr.dl.sourceforge.net...
 :debug:fetch Pinging voxel.dl.sourceforge.net...
 :debug:fetch Pinging waix.dl.sourceforge.net...
 :debug:fetch Pinging distfiles.macports.org...
 :debug:fetch Pinging aarnet.au.distfiles.macports.org...
 :debug:fetch Pinging her.gr.distfiles.macports.org...
 :debug:fetch Pinging jog.id.distfiles.macports.org...
 :debug:fetch Pinging lil.fr.distfiles.macports.org...
 :debug:fetch Pinging sea.us.distfiles.macports.org...
 :debug:fetch Pinging ykf.ca.distfiles.macports.org...
 :debug:fetch downloads.sourceforge.net ping time is 177.235
 :debug:fetch aarnet.dl.sourceforge.net ping time is 323.167
 :debug:fetch biznetnetworks.dl.sourceforge.net ping time is 124.251
 :debug:fetch cdnetworks-us-1.dl.sourceforge.net ping time is 156.548
 :debug:fetch cdnetworks-us-2.dl.sourceforge.net ping time is 153.061
 :debug:fetch cdnetworks-kr-1.dl.sourceforge.net ping time is 71.562
 :debug:fetch cdnetworks-kr-2.dl.sourceforge.net ping time is 75.122
 :debug:fetch citylan.dl.sourceforge.net ping time is 319.386
 :debug:fetch dfn.dl.sourceforge.net ping time is 296.413
 :debug:fetch fastbull.dl.sourceforge.net ping time is 305.353
 :debug:fetch freefr.dl.sourceforge.net ping time is 283.765
 :debug:fetch garr.dl.sourceforge.net ping time is 289.900
 :debug:fetch heanet.dl.sourceforge.net ping time is 297.861
 :debug:fetch hivelocity.dl.sourceforge.net ping time is 203.171
 :debug:fetch ignum.dl.sourceforge.net ping time is 311.838
 :debug:fetch internode.dl.sourceforge.net ping time is 287.285
 :debug:fetch iweb.dl.sourceforge.net ping time is 215.624
 :debug:fetch jaist.dl.sourceforge.net ping time is 56.043
 :debug:fetch kent.dl.sourceforge.net ping time is 270.223
 :debug:fetch mesh.dl.sourceforge.net ping time is 288.895
 :debug:fetch nchc.dl.sourceforge.net ping time is 68.106
 :debug:fetch ncu.dl.sourceforge.net ping time is 10000
 :debug:fetch netcologne.dl.sourceforge.net ping time is 10000
 :debug:fetch puzzle.dl.sourceforge.net ping time is 270.460
 :debug:fetch softlayer.dl.sourceforge.net ping time is 175.226
 :debug:fetch space.dl.sourceforge.net ping time is 427.125
 :debug:fetch sunet.dl.sourceforge.net ping time is 303.011
 :debug:fetch surfnet.dl.sourceforge.net ping time is 270.697
 :debug:fetch switch.dl.sourceforge.net ping time is 258.306
 :debug:fetch transact.dl.sourceforge.net ping time is 274.263
 :debug:fetch ufpr.dl.sourceforge.net ping time is 298.331
 :debug:fetch voxel.dl.sourceforge.net ping time is 116.466
 :debug:fetch waix.dl.sourceforge.net ping time is 327.959
 :debug:fetch distfiles.macports.org ping time is 152.150
 :debug:fetch aarnet.au.distfiles.macports.org ping time is 217.484
 :debug:fetch her.gr.distfiles.macports.org ping time is 319.450
 :debug:fetch jog.id.distfiles.macports.org ping time is 184.146
 :debug:fetch lil.fr.distfiles.macports.org ping time is 257.124
 :debug:fetch sea.us.distfiles.macports.org ping time is 10000
 :debug:fetch ykf.ca.distfiles.macports.org ping time is 187.266
 :notice:fetch --->  Attempting to fetch ntop-3.3.10.tar.gz from
 http://jaist.dl.sourceforge.net/ntop
 :debug:fetch Privilege de-escalation not attempted as not running as root.
 :debug:checksum checksum phase started at Thu Jan  5 12:13:20 JST 2012
 :notice:checksum --->  Verifying checksum(s) for ntop
 :debug:checksum Executing org.macports.checksum (ntop)
 :info:checksum --->  Checksumming ntop-3.3.10.tar.gz
 :debug:checksum Correct (md5) checksum for ntop-3.3.10.tar.gz
 :debug:checksum Privilege de-escalation not attempted as not running as
 root.
 :debug:extract extract phase started at Thu Jan  5 12:13:20 JST 2012
 :notice:extract --->  Extracting ntop
 :debug:extract Executing org.macports.extract (ntop)
 :info:extract --->  Extracting ntop-3.3.10.tar.gz
 :debug:extract setting option extract.args to
 '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz'
 :debug:extract Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:extract Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work"
 && /usr/bin/gzip -dc
 '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz' |
 /usr/bin/gnutar --no-same-owner -xf -'
 :debug:extract Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work"
 && /usr/bin/gzip -dc
 '/opt/local/var/macports/distfiles/ntop/ntop-3.3.10.tar.gz' |
 /usr/bin/gnutar --no-same-owner -xf -
 :debug:extract euid/egid changed to: 0/0
 :debug:extract chowned
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work
 to macports
 :debug:extract euid/egid changed to: 505/502
 :debug:extract Privilege de-escalation not attempted as not running as
 root.
 :debug:patch patch phase started at Thu Jan  5 12:13:21 JST 2012
 :debug:patch Executing org.macports.patch (ntop)
 :notice:patch --->  Applying patches to ntop
 :info:patch --->  Applying
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files
 /patch-external-geoip.diff
 :debug:patch Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:patch Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && /usr/bin/patch -p0'
 :debug:patch Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && /usr/bin/patch -p0 <
 '/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files
 /patch-external-geoip.diff'
 :info:patch patching file configure.in
 :info:patch --->  Applying
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files
 /patch-Makefile.am.diff
 :debug:patch Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:patch Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && /usr/bin/patch -p0'
 :debug:patch Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && /usr/bin/patch -p0 <
 '/opt/local/var/macports/sources/rsync.macports.org/release/ports/net/ntop/files
 /patch-Makefile.am.diff'
 :info:patch patching file Makefile.am
 :debug:patch Privilege de-escalation not attempted as not running as root.
 :debug:configure configure phase started at Thu Jan  5 12:13:21 JST 2012
 :notice:configure --->  Configuring ntop
 :debug:configure Using compiler 'Mac OS X clang'
 :debug:configure Executing proc-pre-org.macports.configure-configure-0
 :info:configure
 :info:configure Starting ntop automatic configuration system v.0.2.3
 :info:configure
 :info:configure   Please be patient, there is a lot to do...
 :info:configure
 :info:configure ....Adding fix for OSX
 :info:configure 1. Testing gnu tools....
 :info:configure     libtool ..... 2.4.2
 :info:configure         .... ok
 :info:configure     automake .... 1.11.2
 :info:configure         .... ok
 :info:configure     autoconf .... 2.68
 :info:configure         .... ok
 :info:configure
 :info:configure 2. Preparing for libtool ....
 :info:configure glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR,
 `.'.
 :info:configure glibtoolize: copying file `./ltmain.sh'
 :info:configure glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
 :info:configure glibtoolize: copying file `m4/libtool.m4'
 :info:configure glibtoolize: copying file `m4/ltoptions.m4'
 :info:configure glibtoolize: copying file `m4/ltsugar.m4'
 :info:configure glibtoolize: copying file `m4/ltversion.m4'
 :info:configure glibtoolize: copying file `m4/lt~obsolete.m4'
 :info:configure glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in
 Makefile.am.
 :info:configure     Finding libtool.m4.in
 :info:configure         .... found /usr/share/aclocal/libtool.m4
 :info:configure         .... done
 :info:configure
 :info:configure 3. Create acinclude.m4, local definitions for automake ...
 :info:configure         .... done
 :info:configure
 :info:configure 4. Running aclocal to create aclocal.m4 ...
 :info:configure acinclude.m4:238: the serial number must appear before any
 macro definition
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
 from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure         .... done
 :info:configure
 :info:configure 5. Running autoheader to create config.h.in ...
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
 from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure         .... done
 :info:configure
 :info:configure 6. Running automake to create Makefile.in ...
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
 from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure configure.in:105: installing `./config.guess'
 :info:configure Makefile.am:119: compiling `main.c' with per-target flags
 requires `AM_PROG_CC_C_O' in `configure.in'
 :info:configure         .... done
 :info:configure
 :info:configure 7. Running autoconf to create configure ...
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
 from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure         .... done
 :info:configure
 :info:configure 8. Skipping ./configure
 :info:configure Run ./configure and then make to compile ntop
 :info:configure
 :debug:configure Executing org.macports.configure (ntop)
 :debug:configure Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:configure Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && autoconf'
 :debug:configure Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && autoconf
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:1280: _LT_SYS_MODULE_PATH_AIX is expanded
 from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :info:configure configure.in:169: warning: AC_LANG_CONFTEST: no
 AC_LANG_SOURCE call detected in body
 :info:configure ../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is
 expanded from...
 :info:configure ../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is
 expanded from...
 :info:configure acinclude.m4:4403: _LT_LINKER_SHLIBS is expanded from...
 :info:configure acinclude.m4:5535: _LT_LANG_C_CONFIG is expanded from...
 :info:configure acinclude.m4:339: _LT_SETUP is expanded from...
 :info:configure acinclude.m4:265: LT_INIT is expanded from...
 :info:configure acinclude.m4:304: AM_PROG_LIBTOOL is expanded from...
 :info:configure configure.in:169: the top level
 :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2
 -I/opt/local/include -arch x86_64' CPPFLAGS='-I/opt/local/include'
 CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib'
 MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/Developer/usr/bin/clang++'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/.CC_PRINT_OPTIONS'
 F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
 OBJC='/Developer/usr/bin/clang' FCFLAGS='-pipe -O2 -m64'
 INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64'
 FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES'
 CC='/Developer/usr/bin/clang'
 :debug:configure Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-
 localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-
 ssl'
 :debug:configure Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-
 localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-ssl
 :info:configure configure: WARNING: unrecognized options: --with-localedir
 :info:configure
 :info:configure Welcome to ntop, Version 3.3.10
 :info:configure   copyright (c) 1998-2009 Luca Deri <deri at ntop.org>
 :info:configure
 :info:configure Configuration script version v3.3.10-06-01-2009
 :info:configure
 :info:configure
 ************************************************************************
 :info:configure *
 *
 :info:configure * NOTICE:  I know you're used to ignoring output from
 ./configure      *
 :info:configure *
 *
 :info:configure *          ntop has a lot of complexity and
 interdependences.          *
 :info:configure *
 *
 :info:configure *          Please, please AT LEAST read the stuff in these
 boxes!      *
 :info:configure *
 *
 :info:configure *>>> The ACTION taken by ./configure is shown prefixed
 with '>>>'      *
 :info:configure *
 *
 :info:configure *    If that ACTION is unacceptable,
 *
 :info:configure *??? Steps to take to fix the problem are shown, prefixed
 with '???'   *
 :info:configure *
 *
 :info:configure
 ************************************************************************
 :info:configure
 :info:configure NOTE:
 :info:configure
 :info:configure        To enable additional, debugging messages during the
 ./configure
 :info:configure        execution, do this before running ./configure:
 :info:configure
 :info:configure $ export NTOPCONFIGDEBUG=yes
 :info:configure
 :info:configure
 :info:configure Configuring ntop according to your request(s):
 :info:configure    ./configure --prefix=/opt/local
 --mandir=/opt/local/share/man --with-localedir=/opt/local/share/locale
 --with-rrd-home=/opt/local --without-ssl
 :info:configure
 :info:configure checking build system type... x86_64-apple-darwin10.8.0
 :info:configure checking host system type... x86_64-apple-darwin10.8.0
 :info:configure checking target system type... x86_64-apple-darwin10.8.0
 :info:configure checking for a BSD-compatible install... /usr/bin/install
 -c
 :info:configure checking whether build environment is sane... yes
 :info:configure checking for a thread-safe mkdir -p...
 /opt/local/bin/gmkdir -p
 :info:configure checking for gawk... gawk
 :info:configure checking whether make sets $(MAKE)... yes
 :info:configure checking for style of include used by make... GNU
 :info:configure checking for gcc... /Developer/usr/bin/clang
 :info:configure checking whether the C compiler works... yes
 :info:configure checking for C compiler default output file name... a.out
 :info:configure checking for suffix of executables...
 :info:configure checking whether we are cross compiling... no
 :info:configure checking for suffix of object files... o
 :info:configure checking whether we are using the GNU C compiler... yes
 :info:configure checking whether /Developer/usr/bin/clang accepts -g...
 yes
 :info:configure checking for /Developer/usr/bin/clang option to accept ISO
 C89... none needed
 :info:configure checking dependency style of /Developer/usr/bin/clang...
 gcc3
 :info:configure checking how to run the C preprocessor...
 /Developer/usr/bin/clang -E
 :info:configure checking for gcc... (cached) /Developer/usr/bin/clang
 :info:configure checking whether we are using the GNU C compiler...
 (cached) yes
 :info:configure checking whether /Developer/usr/bin/clang accepts -g...
 (cached) yes
 :info:configure checking for /Developer/usr/bin/clang option to accept ISO
 C89... (cached) none needed
 :info:configure checking dependency style of /Developer/usr/bin/clang...
 (cached) gcc3
 :info:configure checking whether ln -s works... yes
 :info:configure checking whether make sets $(MAKE)... (cached) yes
 :info:configure checking how to print strings... printf
 :info:configure checking for a sed that does not truncate output...
 /usr/bin/sed
 :info:configure checking for grep that handles long lines and -e...
 /usr/bin/grep
 :info:configure checking for egrep... /usr/bin/grep -E
 :info:configure checking for fgrep... /usr/bin/grep -F
 :info:configure checking for ld used by /Developer/usr/bin/clang...
 /Developer/usr/bin/ld
 :info:configure checking if the linker (/Developer/usr/bin/ld) is GNU
 ld... no
 :info:configure checking for BSD- or MS-compatible name lister (nm)...
 /usr/bin/nm
 :info:configure checking the name lister (/usr/bin/nm) interface... BSD nm
 :info:configure checking the maximum length of command line arguments...
 196608
 :info:configure checking whether the shell understands some XSI
 constructs... yes
 :info:configure checking whether the shell understands "+="... yes
 :info:configure checking for /Developer/usr/bin/ld option to reload object
 files... -r
 :info:configure checking for objdump... no
 :info:configure checking how to recognize dependent libraries... pass_all
 :info:configure checking for ar... ar
 :info:configure checking for strip... strip
 :info:configure checking for ranlib... ranlib
 :info:configure checking command to parse /usr/bin/nm output from
 /Developer/usr/bin/clang object... ok
 :info:configure checking for dsymutil... dsymutil
 :info:configure checking for nmedit... nmedit
 :info:configure checking for lipo... lipo
 :info:configure checking for otool... otool
 :info:configure checking for otool64... otool64
 :info:configure checking for -single_module linker flag... yes
 :info:configure checking for -exported_symbols_list linker flag... yes
 :info:configure checking for -force_load linker flag... yes
 :info:configure checking for ANSI C header files... yes
 :info:configure checking for sys/types.h... yes
 :info:configure checking for sys/stat.h... yes
 :info:configure checking for stdlib.h... yes
 :info:configure checking for string.h... yes
 :info:configure checking for memory.h... yes
 :info:configure checking for strings.h... yes
 :info:configure checking for inttypes.h... yes
 :info:configure checking for stdint.h... yes
 :info:configure checking for unistd.h... yes
 :info:configure checking for dlfcn.h... yes
 :info:configure checking for objdir... .libs
 :info:configure checking if /Developer/usr/bin/clang supports -fno-rtti
 -fno-exceptions... yes
 :info:configure checking for /Developer/usr/bin/clang option to produce
 PIC... -fno-common -DPIC
 :info:configure checking if /Developer/usr/bin/clang PIC flag -fno-common
 -DPIC works... yes
 :info:configure checking if /Developer/usr/bin/clang static flag -static
 works... no
 :info:configure checking if /Developer/usr/bin/clang supports -c -o
 file.o... yes
 :info:configure checking if /Developer/usr/bin/clang supports -c -o
 file.o... (cached) yes
 :info:configure checking whether the /Developer/usr/bin/clang linker
 (/Developer/usr/bin/ld) supports shared libraries... yes
 :info:configure checking dynamic linker characteristics... darwin10.8.0
 dyld
 :info:configure checking how to hardcode library paths into programs...
 immediate
 :info:configure checking whether stripping libraries is possible... yes
 :info:configure checking if libtool supports shared libraries... yes
 :info:configure checking whether to build shared libraries... yes
 :info:configure checking whether to build static libraries... yes
 :info:configure checking for aclocal.m4... yes
 :info:configure checking for depcomp... yes
 :info:configure checking for library containing gethostbyname... none
 required
 :info:configure checking for library containing socket... none required
 :info:configure
 :info:configure Checking C compiler program and features...
 :info:configure
 :info:configure checking for gcc... (cached) /Developer/usr/bin/clang
 :info:configure checking whether we are using the GNU C compiler...
 (cached) yes
 :info:configure checking whether /Developer/usr/bin/clang accepts -g...
 (cached) yes
 :info:configure checking for /Developer/usr/bin/clang option to accept ISO
 C89... (cached) none needed
 :info:configure checking dependency style of /Developer/usr/bin/clang...
 (cached) gcc3
 :info:configure
 :info:configure
 *******************************************************************
 :info:configure *
 :info:configure * Checking for unique options for x86_64-apple-
 darwin10.8.0, /Developer/usr/bin/clang...
 :info:configure *
 :info:configure * This appears to be DARWIN (MacOSX)
 :info:configure *
 :info:configure *   Testing for extra configuration options for DARWIN
 :info:configure *
 :info:configure *    Executing configureextra/DARWIN
 :info:configure         Setting Darwin (Mac OS X) specific flag values
 :info:configure *
 :info:configure
 *******************************************************************
 :info:configure
 :info:configure Test the compiler and setup CFLAGS...
 :info:configure
 :info:configure checking if compiler accepts -g (debugging information)...
 yes
 :info:configure checking if compiler accepts -W (warning flags)... yes
 :info:configure
 :info:configure Critical library/include tests...
 :info:configure
 :info:configure found in standard OSX installation
 :info:configure checking for pcap_next_ex in -lpcap... yes
 :info:configure checking for gdbm...
 :info:configure checking gdbm.h usability... yes
 :info:configure checking gdbm.h presence... yes
 :info:configure checking for gdbm.h... yes
 :info:configure checking for gdbm_open in -lgdbm... yes
 :info:configure checking for pcre_refcount in -lpcre... yes
 :info:configure
 :info:configure
 -------------------------------------------------------------------
 :info:configure
 :info:configure    **Handling your --enable and --disable requests**
 :info:configure
 :info:configure
 :info:configure SSL?
 :info:configure     ...Disabled via ./configure command line option
 --without-ssl
 :info:configure
 :info:configure TCP Wrappers?
 :info:configure     ...(Default) Disabled. Request via ./configure command
 line option --with-tcpwrap.
 :info:configure
 :info:configure Plugins?
 :info:configure     ...(Default) Requested. Disable via ./configure
 command line option --disable-plugins.
 :info:configure
 :info:configure Jumbo (9k) Ethernet Frames?
 :info:configure     ...(Default) Disabled. Request via ./configure command
 line option --enable-jumbo-frames.
 :info:configure
 :info:configure Processing the rest of the ROOT/DIRECTORY entries
 :info:configure
 :info:configure
 :info:configure
 *******************************************************************
 :info:configure *
 :info:configure * WARNING:  You specified a non-existent directory for
 locale files
 :info:configure *                  --with-localedir=/usr/lib/locale
 :info:configure *
 :info:configure *>>> Since we just pass this through to the run-time,
 we're only
 :info:configure *>>> going to warn you here, but ntop might or might not
 function
 :info:configure *>>> as expected.
 :info:configure *
 :info:configure *???     1. Correct the --with-localedir option and rerun
 :info:configure *???        ./configure
 :info:configure *
 :info:configure
 *******************************************************************
 :info:configure
 :info:configure checking for an ANSI C-conforming const... yes
 :info:configure checking for working volatile... yes
 :info:configure checking for inline... inline
 :info:configure checking whether char is unsigned... no
 :info:configure checking for long double with more range or precision than
 double... yes
 :info:configure checking whether byte ordering is bigendian... no
 :info:configure
 :info:configure Testing headers and functions...
 :info:configure
 :info:configure checking for ANSI C header files... (cached) yes
 :info:configure checking for dirent.h that defines DIR... yes
 :info:configure checking for library containing opendir... none required
 :info:configure checking for sys/wait.h that is POSIX.1 compatible... yes
 :info:configure checking whether time.h and sys/time.h may both be
 included... yes
 :info:configure checking float.h usability... yes
 :info:configure checking float.h presence... yes
 :info:configure checking for float.h... yes
 :info:configure checking stddef.h usability... yes
 :info:configure checking stddef.h presence... yes
 :info:configure checking for stddef.h... yes
 :info:configure checking for stdlib.h... (cached) yes
 :info:configure checking for string.h... (cached) yes
 :info:configure checking pcre.h usability... yes
 :info:configure checking pcre.h presence... yes
 :info:configure checking for pcre.h... yes
 :info:configure checking errno.h usability... yes
 :info:configure checking errno.h presence... yes
 :info:configure checking for errno.h... yes
 :info:configure checking fcntl.h usability... yes
 :info:configure checking fcntl.h presence... yes
 :info:configure checking for fcntl.h... yes
 :info:configure checking limits.h usability... yes
 :info:configure checking limits.h presence... yes
 :info:configure checking for limits.h... yes
 :info:configure checking math.h usability... yes
 :info:configure checking math.h presence... yes
 :info:configure checking for math.h... yes
 :info:configure checking signal.h usability... yes
 :info:configure checking signal.h presence... yes
 :info:configure checking for signal.h... yes
 :info:configure checking stdarg.h usability... yes
 :info:configure checking stdarg.h presence... yes
 :info:configure checking for stdarg.h... yes
 :info:configure checking for unistd.h... (cached) yes
 :info:configure checking stdio.h usability... yes
 :info:configure checking stdio.h presence... yes
 :info:configure checking for stdio.h... yes
 :info:configure checking for strings.h... (cached) yes
 :info:configure checking sys/ioctl.h usability... yes
 :info:configure checking sys/ioctl.h presence... yes
 :info:configure checking for sys/ioctl.h... yes
 :info:configure checking sys/socket.h usability... yes
 :info:configure checking sys/socket.h presence... yes
 :info:configure checking for sys/socket.h... yes
 :info:configure checking sys/time.h usability... yes
 :info:configure checking sys/time.h presence... yes
 :info:configure checking for sys/time.h... yes
 :info:configure checking for sys/types.h... (cached) yes
 :info:configure checking setjmp.h usability... yes
 :info:configure checking setjmp.h presence... yes
 :info:configure checking for setjmp.h... yes
 :info:configure checking ieeefp.h usability... no
 :info:configure checking ieeefp.h presence... no
 :info:configure checking for ieeefp.h... no
 :info:configure checking shadow.h usability... no
 :info:configure checking shadow.h presence... no
 :info:configure checking for shadow.h... no
 :info:configure checking sys/utsname.h usability... yes
 :info:configure checking sys/utsname.h presence... yes
 :info:configure checking for sys/utsname.h... yes
 :info:configure checking netinet/in.h usability... yes
 :info:configure checking netinet/in.h presence... yes
 :info:configure checking for netinet/in.h... yes
 :info:configure checking arpa/inet.h usability... yes
 :info:configure checking arpa/inet.h presence... yes
 :info:configure checking for arpa/inet.h... yes
 :info:configure checking arpa/nameser.h usability... yes
 :info:configure checking arpa/nameser.h presence... yes
 :info:configure checking for arpa/nameser.h... yes
 :info:configure checking net/ethernet.h usability... yes
 :info:configure checking net/ethernet.h presence... yes
 :info:configure checking for net/ethernet.h... yes
 :info:configure checking for zlibVersion in -lz... yes
 :info:configure checking for event_get_version in -levent... yes
 :info:configure checking for RRD home... yes
 :info:configure checking for rrdtool... yes
 :info:configure checking for net/if.h... yes
 :info:configure checking net/if_dl.h usability... yes
 :info:configure checking net/if_dl.h presence... yes
 :info:configure checking for net/if_dl.h... yes
 :info:configure checking for netinet/if_ether.h... yes
 :info:configure checking netinet/in_systm.h usability... yes
 :info:configure checking netinet/in_systm.h presence... yes
 :info:configure checking for netinet/in_systm.h... yes
 :info:configure checking for netinet/ip.h... yes
 :info:configure checking for netinet/ip_icmp.h... yes
 :info:configure checking netinet/tcp.h usability... yes
 :info:configure checking netinet/tcp.h presence... yes
 :info:configure checking for netinet/tcp.h... yes
 :info:configure checking for netinet/udp.h... yes
 :info:configure checking sys/param.h usability... yes
 :info:configure checking sys/param.h presence... yes
 :info:configure checking for sys/param.h... yes
 :info:configure checking for net/if_dl.h... (cached) yes
 :info:configure checking for sys/sysctl.h... yes
 :info:configure checking for net/route.h... yes
 :info:configure checking ethertype.h usability... no
 :info:configure checking ethertype.h presence... no
 :info:configure checking for ethertype.h... no
 :info:configure checking net/ppp_defs.h usability... no
 :info:configure checking net/ppp_defs.h presence... no
 :info:configure checking for net/ppp_defs.h... no
 :info:configure checking for linux/if_pppox.h... no
 :info:configure checking crypt.h usability... no
 :info:configure checking crypt.h presence... no
 :info:configure checking for crypt.h... no
 :info:configure checking pwd.h usability... yes
 :info:configure checking pwd.h presence... yes
 :info:configure checking for pwd.h... yes
 :info:configure checking security/pam_appl.h usability... yes
 :info:configure checking security/pam_appl.h presence... yes
 :info:configure checking for security/pam_appl.h... yes
 :info:configure checking for shadow.h... (cached) no
 :info:configure checking dirent.h usability... yes
 :info:configure checking dirent.h presence... yes
 :info:configure checking for dirent.h... yes
 :info:configure checking for dlfcn.h... (cached) yes
 :info:configure checking dl.h usability... no
 :info:configure checking dl.h presence... no
 :info:configure checking for dl.h... no
 :info:configure checking getopt.h usability... yes
 :info:configure checking getopt.h presence... yes
 :info:configure checking for getopt.h... yes
 :info:configure checking if.h usability... no
 :info:configure checking if.h presence... no
 :info:configure checking for if.h... no
 :info:configure checking for inttypes.h... (cached) yes
 :info:configure checking for memory.h... (cached) yes
 :info:configure checking sys/ldr.h usability... no
 :info:configure checking sys/ldr.h presence... no
 :info:configure checking for sys/ldr.h... no
 :info:configure checking for sys/param.h... (cached) yes
 :info:configure checking sys/select.h usability... yes
 :info:configure checking sys/select.h presence... yes
 :info:configure checking for sys/select.h... yes
 :info:configure checking sys/sockio.h usability... yes
 :info:configure checking sys/sockio.h presence... yes
 :info:configure checking for sys/sockio.h... yes
 :info:configure checking for sys/stat.h... (cached) yes
 :info:configure checking sys/un.h usability... yes
 :info:configure checking sys/un.h presence... yes
 :info:configure checking for sys/un.h... yes
 :info:configure checking for sys/wait.h... (cached) yes
 :info:configure checking zlib.h usability... yes
 :info:configure checking zlib.h presence... yes
 :info:configure checking for zlib.h... yes
 :info:configure checking sched.h usability... yes
 :info:configure checking sched.h presence... yes
 :info:configure checking for sched.h... yes
 :info:configure checking sys/sched.h usability... no
 :info:configure checking sys/sched.h presence... no
 :info:configure checking for sys/sched.h... no
 :info:configure checking pthread.h usability... yes
 :info:configure checking pthread.h presence... yes
 :info:configure checking for pthread.h... yes
 :info:configure checking sys/syslog.h usability... yes
 :info:configure checking sys/syslog.h presence... yes
 :info:configure checking for sys/syslog.h... yes
 :info:configure checking syslog.h usability... yes
 :info:configure checking syslog.h presence... yes
 :info:configure checking for syslog.h... yes
 :info:configure checking tcpd.h usability... yes
 :info:configure checking tcpd.h presence... yes
 :info:configure checking for tcpd.h... yes
 :info:configure checking ip6.h usability... no
 :info:configure checking ip6.h presence... no
 :info:configure checking for ip6.h... no
 :info:configure checking icmp6.h usability... no
 :info:configure checking icmp6.h presence... no
 :info:configure checking for icmp6.h... no
 :info:configure checking for netinet/ip6.h... yes
 :info:configure checking for netinet/icmp6.h... yes
 :info:configure checking for sysctl... yes
 :info:configure checking for finite... yes
 :info:configure checking for isinf... yes
 :info:configure checking for pid_t... yes
 :info:configure checking for size_t... yes
 :info:configure checking whether time.h and sys/time.h may both be
 included... (cached) yes
 :info:configure checking whether struct tm is in sys/time.h or time.h...
 time.h
 :info:configure checking for struct tm.tm_zone... yes
 :info:configure checking for typedef u_int64_t... yes
 :info:configure checking for typedef uint64_t... no
 :info:configure checking for typedef u_int32_t... yes
 :info:configure checking for typedef u_int16_t... yes
 :info:configure checking for typedef u_int8_t... yes
 :info:configure checking for typedef int64_t... yes
 :info:configure checking for typedef int32_t... yes
 :info:configure checking for typedef int16_t... yes
 :info:configure checking for typedef int8_t... yes
 :info:configure checking for backtrace in -lc... yes
 :info:configure checking for crypt in -lc... yes
 :info:configure checking for crypt_get_format_get_format in -lc... no
 :info:configure checking for crypt_get_format in -lcrypt... no
 :info:configure checking for getopt_long in -lc... yes
 :info:configure checking for dlopen in -lc... yes
 :info:configure checking for dladdr (GNU extension)... yes
 :info:configure checking for sin in -lc... yes
 :info:configure checking for ceil in -lc... yes
 :info:configure checking for pthread_create in -lpthread... yes
 :info:configure checking for sem_init in -lposix4... no
 :info:configure checking vfork.h usability... no
 :info:configure checking vfork.h presence... no
 :info:configure checking for vfork.h... no
 :info:configure checking for fork... yes
 :info:configure checking for vfork... yes
 :info:configure checking for working fork... yes
 :info:configure checking for working vfork... (cached) yes
 :info:configure checking whether /Developer/usr/bin/clang needs
 -traditional... no
 :info:configure checking for working memcmp... yes
 :info:configure checking return type of signal handlers... void
 :info:configure checking whether lstat correctly handles trailing slash...
 no
 :info:configure checking whether stat accepts an empty string... no
 :info:configure checking for strftime... yes
 :info:configure checking for alarm... yes
 :info:configure checking for endpwent... yes
 :info:configure checking for gethostbyaddr... yes
 :info:configure checking for gethostbyname... yes
 :info:configure checking for gethostname... yes
 :info:configure checking for gethostbyaddr_r... no
 :info:configure checking for getpass... yes
 :info:configure checking for gettimeofday... yes
 :info:configure checking for localtime_r... yes
 :info:configure checking for memchr... yes
 :info:configure checking for memset... yes
 :info:configure checking for putenv... yes
 :info:configure checking for sched_yield... yes
 :info:configure checking for select... yes
 :info:configure checking for socket... yes
 :info:configure checking for snprintf... yes
 :info:configure checking for sqrtf... yes
 :info:configure checking for strcasecmp... yes
 :info:configure checking for strncasecmp... yes
 :info:configure checking for strcasestr... yes
 :info:configure checking for strchr... yes
 :info:configure checking for strrchr... yes
 :info:configure checking for strcspn... yes
 :info:configure checking for strdup... yes
 :info:configure checking for strerror... yes
 :info:configure checking for strpbrk... yes
 :info:configure checking for strsignal... yes
 :info:configure checking for strspn... yes
 :info:configure checking for strstr... yes
 :info:configure checking for strtoul... yes
 :info:configure checking for uname... yes
 :info:configure checking for strtok_r... yes
 :info:configure
 :info:configure Now, let's check for problems with what we've found...
 :info:configure
 :info:configure    Testing Required libraries and headers**
 :info:configure
 :info:configure checking for required C headers... ok
 :info:configure checking for crypt... ok
 :info:configure checking for dynamic load module... skipping - ntop
 emulates function in ntop_darwin.c
 :info:configure
 :info:configure
 -------------------------------------------------------------------
 :info:configure
 :info:configure    **Testing Optional libraries and headers**
 :info:configure
 :info:configure checking for Multithreading... ok
 :info:configure checking for zlib... ok
 :info:configure checking for perl... perl
 :info:configure checking whether perl development environment is
 present... yes
 :info:configure --2012-01-05 12:13:39--
 http://www.lua.org/ftp/lua-5.1.4.tar.gz
 :info:configure Resolving www.lua.org (www.lua.org)... 2a02:40:41::5
 :info:configure Connecting to www.lua.org
 (www.lua.org)|2a02:40:41::5|:80... failed: No route to host.
 :info:configure tar: Error opening archive: Failed to open
 'lua-5.1.4.tar.gz': No such file or directory
 :info:configure cat: lua-5.1.4/src/Makefile: No such file or directory
 :info:configure ./configure: line 18318: lua-5.1.4/src/Makefile: No such
 file or directory
 :info:configure ./configure: line 18320: cd: lua-5.1.4: No such file or
 directory
 :info:configure make: *** No rule to make target `posix'.  Stop.
 :info:configure checking sctp... no
 :info:configure checking pthread_atfork... no
 :info:configure
 :info:configure Miscelaneous settings...
 :info:configure
 :info:configure checking for gcc backtrace... found - automatic SIGSEGV
 backtrace enabled via -K
 :info:configure checking for gcc getopt_long... found - long command line
 options are enabled
 :info:configure checking for facilitynames - define SYSLOG_NAMES option...
 unavailable
 :info:configure checking if ether_header uses ether_addr structs... no
 :info:configure checking if in6_addr is defined for sFlowPlugin... yes
 :info:configure
 :info:configure
 -------------------------------------------------------------------
 :info:configure
 :info:configure Removing dups and misplaced entries from LIBS and INCS...
 :info:configure checking GeoIP.h usability... yes
 :info:configure checking GeoIP.h presence... yes
 :info:configure checking for GeoIP.h... yes
 :info:configure checking for GeoIP_open in -lGeoIP... no
 :info:configure configure: error: in
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10':
 :info:configure configure: error: GeoIP library is missing
 :info:configure See `config.log' for more details
 :info:configure shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/work/ntop-3.3.10"
 && ./configure --prefix=/opt/local --mandir=/opt/local/share/man --with-
 localedir=/opt/local/share/locale --with-rrd-home=/opt/local --without-ssl
 " returned error 1
 :error:configure Target org.macports.configure returned: configure
 failure: shell command failed (see log for details)
 :debug:configure Backtrace: configure failure: shell command failed (see
 log for details)
     while executing
 "$procedure $targetname"
 :info:configure Warning: the following items did not execute (for ntop):
 org.macports.activate org.macports.configure org.macports.build
 org.macports.destroot org.macports.install
 :notice:configure Log for ntop is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_ntop/ntop/main.log
 }}}

--

Comment:

 Please remember to use WikiFormatting when pasting output. Please do not
 set the milestone field when reporting bugs. Also, remember to Cc the
 maintainer.

 The problem occurs when trying to download lua from lua.org. Your Mac
 apparently has an IPv6 address, but no IPv6 route and/or connection, which
 causes the download to fail. This is a misconfiguration on your end,
 please fix your IPv6 setup and try again.

-- 
Ticket URL: <https://trac.macports.org/ticket/32768#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS