[MacPorts] #34729: gtk2-murrine 0.98 fail to compile
MacPorts
noreply at macports.org
Sat Jun 2 11:49:16 PDT 2012
#34729: gtk2-murrine 0.98 fail to compile
-------------------------------------------+--------------------------------
Reporter: mattiafrancescomoro@… | Owner: macports-tickets@…
Type: defect | Status: new
Priority: Normal | Milestone:
Component: ports | Version: 2.1.1
Keywords: | Port:
-------------------------------------------+--------------------------------
I tried to compile gtk2-murrine but:
{{{
sudo port -d install gtk2-murrine
DEBUG: Copying /Users/mfm/Library/Preferences/com.apple.dt.Xcode.plist to
/opt/local/var/macports/home/Library/Preferences
DEBUG: Changing to port directory:
/Users/mfm/Sviluppo/ports/gnome/gtk2-murrine
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_x11 is not provided by port gtk2-murrine.
DEBUG: Requested variant +no_gnome is not provided by port gtk2-murrine.
DEBUG: Requested variant +quartz is not provided by port gtk2-murrine.
DEBUG: changing euid/egid - current euid: 0 - current egid: 0
DEBUG: egid changed to: 502
DEBUG: euid changed to: 502
DEBUG: Starting logging for gtk2-murrine
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: intltool 0.50.2_0 exists in the ports tree
DEBUG: intltool 0.50.2_0 is the latest installed
DEBUG: intltool 0.50.2_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: Requested variant +no_gnome is not provided by port intltool.
DEBUG: Requested variant +no_x11 is not provided by port intltool.
DEBUG: Requested variant +quartz is not provided by port intltool.
DEBUG: No need to upgrade! intltool 0.50.2_0 >= intltool 0.50.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.1.0_0 exists in the ports tree
DEBUG: expat 2.1.0_0 is the latest installed
DEBUG: expat 2.1.0_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port expat.
DEBUG: Requested variant +no_x11 is not provided by port expat.
DEBUG: Requested variant +quartz is not provided by port expat.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.12 5.12.4_0 exists in the ports tree
DEBUG: perl5.12 5.12.4_0 is the latest installed
DEBUG: perl5.12 5.12.4_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port perl5.12.
DEBUG: Requested variant +no_x11 is not provided by port perl5.12.
DEBUG: Requested variant +quartz is not provided by port perl5.12.
DEBUG: No need to upgrade! perl5.12 5.12.4_0 >= perl5.12 5.12.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.10_1 exists in the ports tree
DEBUG: gdbm 1.10_1 is the latest installed
DEBUG: gdbm 1.10_1 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port gdbm.
DEBUG: Requested variant +no_x11 is not provided by port gdbm.
DEBUG: Requested variant +quartz is not provided by port gdbm.
DEBUG: No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_2 exists in the ports tree
DEBUG: gettext 0.18.1.1_2 is the latest installed
DEBUG: gettext 0.18.1.1_2 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port gettext.
DEBUG: Requested variant +no_x11 is not provided by port gettext.
DEBUG: Requested variant +quartz is not provided by port gettext.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.14_0 exists in the ports tree
DEBUG: libiconv 1.14_0 is the latest installed
DEBUG: libiconv 1.14_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port libiconv.
DEBUG: Requested variant +no_x11 is not provided by port libiconv.
DEBUG: Requested variant +quartz is not provided by port libiconv.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.9_1 exists in the ports tree
DEBUG: ncurses 5.9_1 is the latest installed
DEBUG: ncurses 5.9_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port ncurses.
DEBUG: Requested variant +no_x11 is not provided by port ncurses.
DEBUG: Requested variant +quartz is not provided by port ncurses.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5.12-xml-parser 2.400.0_3 exists in the ports tree
DEBUG: p5.12-xml-parser 2.400.0_3 is the latest installed
DEBUG: p5.12-xml-parser 2.400.0_3 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-xml-parser
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for livecheck.version
DEBUG: Re-registering default for configure.universal_args
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port p5.12-xml-
parser.
DEBUG: Requested variant +no_x11 is not provided by port p5.12-xml-parser.
DEBUG: Requested variant +quartz is not provided by port p5.12-xml-parser.
DEBUG: No need to upgrade! p5.12-xml-parser 2.400.0_3 >= p5.12-xml-parser
2.400.0_3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5.12-getopt-long 2.380.0_2 exists in the ports tree
DEBUG: p5.12-getopt-long 2.380.0_2 is the latest installed
DEBUG: p5.12-getopt-long 2.380.0_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-getopt-long
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for livecheck.version
DEBUG: Re-registering default for configure.universal_args
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: Requested variant +no_gnome is not provided by port p5.12-getopt-
long.
DEBUG: Requested variant +no_x11 is not provided by port p5.12-getopt-
long.
DEBUG: Requested variant +quartz is not provided by port p5.12-getopt-
long.
DEBUG: No need to upgrade! p5.12-getopt-long 2.380.0_2 >= p5.12-getopt-
long 2.380.0_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5.12-pathtools 3.330.0_2 exists in the ports tree
DEBUG: p5.12-pathtools 3.330.0_2 is the latest installed
DEBUG: p5.12-pathtools 3.330.0_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for livecheck.version
DEBUG: Re-registering default for configure.universal_args
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port
p5.12-pathtools.
DEBUG: Requested variant +no_x11 is not provided by port p5.12-pathtools.
DEBUG: Requested variant +quartz is not provided by port p5.12-pathtools.
DEBUG: No need to upgrade! p5.12-pathtools 3.330.0_2 >= p5.12-pathtools
3.330.0_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5.12-scalar-list-utils 1.230.0_2 exists in the ports tree
DEBUG: p5.12-scalar-list-utils 1.230.0_2 is the latest installed
DEBUG: p5.12-scalar-list-utils 1.230.0_2 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
-scalar-list-utils
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: Re-registering default for livecheck.version
DEBUG: Re-registering default for configure.universal_args
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port p5.12-scalar-
list-utils.
DEBUG: Requested variant +no_x11 is not provided by port p5.12-scalar-
list-utils.
DEBUG: Requested variant +quartz is not provided by port p5.12-scalar-
list-utils.
DEBUG: No need to upgrade! p5.12-scalar-list-utils 1.230.0_2 >= p5.12
-scalar-list-utils 1.230.0_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.26_1 exists in the ports tree
DEBUG: pkgconfig 0.26_1 is the latest installed
DEBUG: pkgconfig 0.26_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port pkgconfig.
DEBUG: Requested variant +no_x11 is not provided by port pkgconfig.
DEBUG: Requested variant +quartz is not provided by port pkgconfig.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! pkgconfig 0.26_1 >= pkgconfig 0.26_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.32.3_1 exists in the ports tree
DEBUG: glib2 2.32.3_1 is the latest installed
DEBUG: glib2 2.32.3_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port glib2.
DEBUG: Requested variant +no_x11 is not provided by port glib2.
DEBUG: Requested variant +quartz is not provided by port glib2.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! glib2 2.32.3_1 >= glib2 2.32.3_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.7_0 exists in the ports tree
DEBUG: zlib 1.2.7_0 is the latest installed
DEBUG: zlib 1.2.7_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port zlib.
DEBUG: Requested variant +no_x11 is not provided by port zlib.
DEBUG: Requested variant +quartz is not provided by port zlib.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libffi 3.0.11_0 exists in the ports tree
DEBUG: libffi 3.0.11_0 is the latest installed
DEBUG: libffi 3.0.11_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port libffi.
DEBUG: Requested variant +no_x11 is not provided by port libffi.
DEBUG: Requested variant +quartz is not provided by port libffi.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libffi 3.0.11_0 >= libffi 3.0.11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.12.3_1 exists in the ports tree
DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed
DEBUG: perl5 5.12.3_1 +perl5_12 is active
DEBUG: Merging existing variants '+perl5_12' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + perl5_12 +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: universal_variant is false, so not adding the default universal
variant
DEBUG: Requested variant +no_gnome is not provided by port perl5.
DEBUG: Requested variant +no_x11 is not provided by port perl5.
DEBUG: Requested variant +quartz is not provided by port perl5.
DEBUG: Executing variant perl5_12 provides perl5_12
DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gtk2 2.24.10_1 exists in the ports tree
DEBUG: gtk2 2.24.10_1 +no_x11+quartz is the latest installed
DEBUG: gtk2 2.24.10_1 +no_x11+quartz+universal is active
DEBUG: Merging existing variants '+no_x11+quartz+universal' into variants
DEBUG: new fully merged portvariants: universal + no_gnome + no_x11 +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port gtk2.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant no_x11 provides no_x11
DEBUG: Executing variant quartz provides quartz
DEBUG: No need to upgrade! gtk2 2.24.10_1 >= gtk2 2.24.10_1
DEBUG: epoch: in tree: 2 installed: 2
DEBUG: atk 2.2.0_1 exists in the ports tree
DEBUG: atk 2.2.0_1 is the latest installed
DEBUG: atk 2.2.0_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port atk.
DEBUG: Requested variant +no_x11 is not provided by port atk.
DEBUG: Requested variant +quartz is not provided by port atk.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! atk 2.2.0_1 >= atk 2.2.0_1
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: pango 1.30.0_1 exists in the ports tree
DEBUG: pango 1.30.0_1 +no_x11+quartz is the latest installed
DEBUG: pango 1.30.0_1 +no_x11+quartz+universal is active
DEBUG: Merging existing variants '+no_x11+quartz+universal-x11' into
variants
DEBUG: new fully merged portvariants: universal + no_gnome + x11 - no_x11
+ quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant +no_gnome is not provided by port pango.
DEBUG: Executing variant quartz provides quartz
DEBUG: Executing variant no_x11 provides no_x11
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! pango 1.30.0_1 >= pango 1.30.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cairo 1.12.2_0 exists in the ports tree
DEBUG: cairo 1.12.2_0 +no_x11+quartz is the latest installed
DEBUG: cairo 1.12.2_0 +no_x11+quartz+universal is active
DEBUG: Merging existing variants '+no_x11+quartz+universal-x11' into
variants
DEBUG: new fully merged portvariants: universal + no_gnome + x11 - no_x11
+ quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port cairo.
DEBUG: Executing variant universal provides universal
DEBUG: Executing variant quartz provides quartz
DEBUG: Executing variant no_x11 provides no_x11
DEBUG: No need to upgrade! cairo 1.12.2_0 >= cairo 1.12.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpixman 0.26.0_0 exists in the ports tree
DEBUG: libpixman 0.26.0_0 is the latest installed
DEBUG: libpixman 0.26.0_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port libpixman.
DEBUG: Requested variant +no_x11 is not provided by port libpixman.
DEBUG: Requested variant +quartz is not provided by port libpixman.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libpixman 0.26.0_0 >= libpixman 0.26.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.9.0_1 exists in the ports tree
DEBUG: fontconfig 2.9.0_1 is the latest installed
DEBUG: fontconfig 2.9.0_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port fontconfig.
DEBUG: Requested variant +no_x11 is not provided by port fontconfig.
DEBUG: Requested variant +quartz is not provided by port fontconfig.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.4.9_1 exists in the ports tree
DEBUG: freetype 2.4.9_1 is the latest installed
DEBUG: freetype 2.4.9_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port freetype.
DEBUG: Requested variant +no_x11 is not provided by port freetype.
DEBUG: Requested variant +quartz is not provided by port freetype.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! freetype 2.4.9_1 >= freetype 2.4.9_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.6_0 exists in the ports tree
DEBUG: bzip2 1.0.6_0 is the latest installed
DEBUG: bzip2 1.0.6_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant +no_gnome is not provided by port bzip2.
DEBUG: Requested variant +no_x11 is not provided by port bzip2.
DEBUG: Requested variant +quartz is not provided by port bzip2.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.4.11_0 exists in the ports tree
DEBUG: libpng 1.4.11_0 is the latest installed
DEBUG: libpng 1.4.11_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port libpng.
DEBUG: Requested variant +no_x11 is not provided by port libpng.
DEBUG: Requested variant +quartz is not provided by port libpng.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libpng 1.4.11_0 >= libpng 1.4.11_0
DEBUG: epoch: in tree: 2 installed: 2
DEBUG: gdk-pixbuf2 2.26.1_1 exists in the ports tree
DEBUG: gdk-pixbuf2 2.26.1_1 is the latest installed
DEBUG: gdk-pixbuf2 2.26.1_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
/gdk-pixbuf2
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port gdk-pixbuf2.
DEBUG: Requested variant +no_x11 is not provided by port gdk-pixbuf2.
DEBUG: Requested variant +quartz is not provided by port gdk-pixbuf2.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! gdk-pixbuf2 2.26.1_1 >= gdk-pixbuf2 2.26.1_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jasper 1.900.1_9 exists in the ports tree
DEBUG: jasper 1.900.1_9 is the latest installed
DEBUG: jasper 1.900.1_9 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port jasper.
DEBUG: Requested variant +no_x11 is not provided by port jasper.
DEBUG: Requested variant +quartz is not provided by port jasper.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 8d_0 exists in the ports tree
DEBUG: jpeg 8d_0 is the latest installed
DEBUG: jpeg 8d_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port jpeg.
DEBUG: Requested variant +no_x11 is not provided by port jpeg.
DEBUG: Requested variant +quartz is not provided by port jpeg.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.9.5_0 exists in the ports tree
DEBUG: tiff 3.9.5_0 is the latest installed
DEBUG: tiff 3.9.5_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port tiff.
DEBUG: Requested variant +no_x11 is not provided by port tiff.
DEBUG: Requested variant +quartz is not provided by port tiff.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: shared-mime-info 1.0_0 exists in the ports tree
DEBUG: shared-mime-info 1.0_0 is the latest installed
DEBUG: shared-mime-info 1.0_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
/shared-mime-info
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port shared-mime-
info.
DEBUG: Requested variant +no_x11 is not provided by port shared-mime-info.
DEBUG: Requested variant +quartz is not provided by port shared-mime-info.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-info
1.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.8_0 exists in the ports tree
DEBUG: libxml2 2.7.8_0 is the latest installed
DEBUG: libxml2 2.7.8_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant +no_gnome is not provided by port libxml2.
DEBUG: Requested variant +no_x11 is not provided by port libxml2.
DEBUG: Requested variant +quartz is not provided by port libxml2.
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hicolor-icon-theme 0.12_0 exists in the ports tree
DEBUG: hicolor-icon-theme 0.12_0 is the latest installed
DEBUG: hicolor-icon-theme 0.12_0 is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
DEBUG: Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
/hicolor-icon-theme
DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal
variant
DEBUG: Requested variant +no_gnome is not provided by port hicolor-icon-
theme.
DEBUG: Requested variant +no_x11 is not provided by port hicolor-icon-
theme.
DEBUG: Requested variant +quartz is not provided by port hicolor-icon-
theme.
DEBUG: No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme
0.12_0
---> Computing dependencies for gtk2-murrine
DEBUG: gtk2-murrine has no conflicts
DEBUG: Searching for dependency: intltool
DEBUG: Found Dependency: receipt exists for intltool
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: gtk2
DEBUG: Found Dependency: receipt exists for gtk2
DEBUG: Searching for dependency: gettext
DEBUG: Found Dependency: receipt exists for gettext
DEBUG: Executing org.macports.main (gtk2-murrine)
DEBUG: changing euid/egid - current euid: 0 - current egid: 0
DEBUG: egid changed to: 502
DEBUG: euid changed to: 502
DEBUG: Skipping completed org.macports.archivefetch (gtk2-murrine)
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: Skipping completed org.macports.fetch (gtk2-murrine)
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: Skipping completed org.macports.checksum (gtk2-murrine)
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: Skipping completed org.macports.extract (gtk2-murrine)
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: Skipping completed org.macports.patch (gtk2-murrine)
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: Skipping completed org.macports.configure (gtk2-murrine)
DEBUG: Privilege de-escalation not attempted as not running as root.
DEBUG: build phase started at Sat Jun 2 20:42:05 CEST 2012
---> Building gtk2-murrine
DEBUG: Executing org.macports.build (gtk2-murrine)
DEBUG: Environment: CPATH='/opt/local/include'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/.CC_PRINT_OPTIONS'
LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
MACOSX_DEPLOYMENT_TARGET='10.7'
DEBUG: Assembled command: 'cd
"/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0"
&& /usr/bin/make -j2 -w all'
DEBUG: Executing command line: cd
"/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0"
&& /usr/bin/make -j2 -w all
make: Entering directory
`/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0'
Making all in schema
make[1]: Entering directory
`/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0/schema'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0/schema'
make[1]: Entering directory
`/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0'
CC animation.lo
CC murrine_rc_style.lo
In file included from ./src/animation.c:24:
/opt/local/include/glib-2.0/glib/gtimer.h:28:2: error: #error "Only
<glib.h> can be included directly."
make[1]: *** [animation.lo] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory
`/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0'
make: *** [all-recursive] Error 1
make: Leaving directory
`/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0'
Command failed: cd
"/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0"
&& /usr/bin/make -j2 -w all
Exit code: 2
Error: org.macports.build for port gtk2-murrine returned: command
execution failed
DEBUG: Error code: CHILDSTATUS 9302 2
DEBUG: Backtrace: command execution failed
while executing
"system -nice 0 $fullcmdstring"
("eval" body line 1)
invoked from within
"eval system $notty $nice \$fullcmdstring"
invoked from within
"command_exec build"
(procedure "portbuild::build_main" line 8)
invoked from within
"$procedure $targetname"
Warning: targets not executed for gtk2-murrine: org.macports.activate
org.macports.build org.macports.destroot org.macports.install
Please see the log file for port gtk2-murrine for details:
/opt/local/var/macports/logs/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/main.log
To report a bug, follow the instructions in the guide:
http://guide.macports.org/#project.tickets
Error: Processing of port gtk2-murrine failed
}}}
--
Ticket URL: <https://trac.macports.org/ticket/34729>
MacPorts <http://www.macports.org/>
Ports system for Mac OS
More information about the macports-tickets
mailing list