[MacPorts] #69836: kicad @7.0.11: checksum mismatch (was: Kicad 7.0.11.0 incorrect Checksums. This is for Catalina 10.15.7 install)

[MacPorts]

#69836: kicad @7.0.11: checksum mismatch
--------------------------+----------------------
  Reporter:  Gamespeople  |      Owner:  ra1nb0w
      Type:  defect       |     Status:  assigned
  Priority:  Normal       |  Milestone:
 Component:  ports        |    Version:
Resolution:               |   Keywords:
      Port:  kicad        |
--------------------------+----------------------
Changes (by ryandesign):

 * cc: ryandesign (added)
 * port:  Kicad => kicad


Old description:

> I've done the Checksum error test - reran: sudo port /self update, /clean
> —dist kicad and tried /install kicad again… and I am still getting:
>
> --->  Computing dependencies for kicad
> --->  Fetching archive for kicad
> --->  Attempting to fetch kicad-7.0.11_0.darwin_19.x86_64.tbz2 from
> https://packages.macports.org/kicad
> --->  Attempting to fetch kicad-7.0.11_0.darwin_19.x86_64.tbz2 from
> http://mirror.fcix.net/macports/packages/kicad
> --->  Attempting to fetch kicad-7.0.11_0.darwin_19.x86_64.tbz2 from
> https://ywg.ca.packages.macports.org/mirror/macports/packages/kicad
> --->  Verifying checksums for kicad
> Error: Checksum (rmd160) mismatch for kicad-7.0.11.tar.bz2
> Error: Checksum (sha256) mismatch for kicad-7.0.11.tar.bz2
> Error: Checksum (size) mismatch for kicad-7.0.11.tar.bz2
> Error: Failed to checksum kicad: Unable to verify file checksums
>
> I see that KiCad updated 7.0.11 Feb 22 (I assume 2024), and perhaps no
> one else has tried to install this since.
>
> Hope I didn't make a mistake assigning this to ra1nb0w!
>
> John :-#)#

New description:

 I've done the Checksum error test - reran: sudo port /self update, /clean
 —dist kicad and tried /install kicad again… and I am still getting:

 {{{
 --->  Computing dependencies for kicad
 --->  Fetching archive for kicad
 --->  Attempting to fetch kicad-7.0.11_0.darwin_19.x86_64.tbz2 from
 https://packages.macports.org/kicad
 --->  Attempting to fetch kicad-7.0.11_0.darwin_19.x86_64.tbz2 from
 http://mirror.fcix.net/macports/packages/kicad
 --->  Attempting to fetch kicad-7.0.11_0.darwin_19.x86_64.tbz2 from
 https://ywg.ca.packages.macports.org/mirror/macports/packages/kicad
 --->  Verifying checksums for kicad
 Error: Checksum (rmd160) mismatch for kicad-7.0.11.tar.bz2
 Error: Checksum (sha256) mismatch for kicad-7.0.11.tar.bz2
 Error: Checksum (size) mismatch for kicad-7.0.11.tar.bz2
 Error: Failed to checksum kicad: Unable to verify file checksums
 }}}

 I see that KiCad updated 7.0.11 Feb 22 (I assume 2024), and perhaps no one
 else has tried to install this since.

 Hope I didn't make a mistake assigning this to ra1nb0w!

 John :-#)#

--

Comment:

 I [changeset:d267a1cb353b4d144987cc0915e7da582dedd126/macports-ports
 updated kicad to 7.0.11] on April 7 and the checksums were correct at that
 time. I agree that they are incorrect now:

 {{{
 % sudo port fetch --no-mirrors kicad
 Portfile for kicad changed since last build; discarding previous state.
 --->  Fetching distfiles for kicad
 --->  Attempting to fetch kicad-7.0.11.tar.bz2 from
 https://gitlab.com/kicad/code/kicad/-/archive/7.0.11
 % sudo port checksum kicad
 --->  Verifying checksums for kicad
 Error: Checksum (rmd160) mismatch for kicad-7.0.11.tar.bz2
 Error: Checksum (sha256) mismatch for kicad-7.0.11.tar.bz2
 Error: Checksum (size) mismatch for kicad-7.0.11.tar.bz2
 Error: Failed to checksum kicad: Unable to verify file checksums
 Error: See
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_science_kicad/kicad/main.log
 for details.
 Error: Follow https://guide.macports.org/#project.tickets if you believe
 there is a bug.
 Error: Processing of port kicad failed
 }}}

 The difference between the file we mirrored April 7 and the file available
 from GitLab today is:

 {{{#!diff
 diff -ru macports/kicad-7.0.11/thirdparty/argparse/tools/build.bat
 gitlab/kicad-7.0.11/thirdparty/argparse/tools/build.bat
 --- macports/kicad-7.0.11/thirdparty/argparse/tools/build.bat   2024-02-21
 06:39:11.000000000 -0600
 +++ gitlab/kicad-7.0.11/thirdparty/argparse/tools/build.bat     2024-02-21
 06:39:11.000000000 -0600
 @@ -1,4 +1,4 @@
 -call "C:\Program Files (x86)\Microsoft Visual
 Studio\2017\BuildTools\VC\Auxiliary\Build\vcvars64.bat"
 -
 -cmake -B build -G Ninja -DCMAKE_BUILD_TYPE=Release
 -DARGPARSE_BUILD_TESTS=ON
 -ninja -C build
 +call "C:\Program Files (x86)\Microsoft Visual
 Studio\2017\BuildTools\VC\Auxiliary\Build\vcvars64.bat"
 +
 +cmake -B build -G Ninja -DCMAKE_BUILD_TYPE=Release
 -DARGPARSE_BUILD_TESTS=ON
 +ninja -C build
 }}}

 That is to say, a Windows build file's line endings changed from CRLF to
 LF, which is very frustrating because
 [https://gitlab.com/kicad/code/kicad/-/blob/7.0.11/thirdparty/argparse/tools/build.bat
 the file in their repository has not changed] so this should absolutely
 not happen. Perhaps GitLab changed how they automatically generate
 tarballs. This is one of the perils of tying ports to automatically-
 generated tarballs and why we really don't want to do it and only do it
 when the developers do not give us any other option.

 Updating to 7.0.11 was always intended to be a stopgap before
 [ticket:69647 updating to 8.x] which will of course fix the issue since
 the new version will have different checksums. Until then we can ignore
 the inexplicable [PortfileRecipes#stealth-updates stealth update].

-- 
Ticket URL: <https://trac.macports.org/ticket/69836#comment:2>
MacPorts <https://www.macports.org/>
Ports system for macOS