gtk-doc installation error

[Peng Yu]

Hi,

I get the following error. Does anybody know how to fix the problem?
The content of the log file is posted at the bottom.

$sudo port install gtk-doc
Password:
--->  Computing dependencies for gtk-doc
--->  Configuring gtk-doc
Error: Target org.macports.configure returned: configure failure:
shell command failed (see log for details)
Log for gtk-doc is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

-- 
Regards,
Peng

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gnome-doc-utils 0.20.6_0 exists in the ports tree
:debug:main gnome-doc-utils 0.20.6_0 +python27 is the latest installed
:debug:main gnome-doc-utils 0.20.6_0 +python27 is active
:debug:main Merging existing variants '+python27' into variants
:debug:main new fully merged portvariants: python27 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Executing variant python27 provides python27
:debug:main No need to upgrade! gnome-doc-utils 0.20.6_0 >=
gnome-doc-utils 0.20.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2  is the latest installed
:debug:main gettext 0.18.1.1_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0  is the latest installed
:debug:main libiconv 1.13.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_0 exists in the ports tree
:debug:main ncurses 5.9_0  is the latest installed
:debug:main ncurses 5.9_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1  is the latest installed
:debug:main expat 2.0.1_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxslt 1.1.26_0 exists in the ports tree
:debug:main libxslt 1.1.26_0  is the latest installed
:debug:main libxslt 1.1.26_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0  is the latest installed
:debug:main libxml2 2.7.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0  is the latest installed
:debug:main zlib 1.2.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main py27-libxml2 2.6.21_0 exists in the ports tree
:debug:main py27-libxml2 2.6.21_0  is the latest installed
:debug:main py27-libxml2 2.6.21_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-libxml2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! py27-libxml2 2.6.21_0 >= py27-libxml2 2.6.21_0
:debug:main epoch: in tree: 2 installed: 2
:debug:main python27 2.7.2_0 exists in the ports tree
:debug:main python27 2.7.2_0  is the latest installed
:debug:main python27 2.7.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! python27 2.7.2_0 >= python27 2.7.2_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0d_0 exists in the ports tree
:debug:main openssl 1.0.0d_0  is the latest installed
:debug:main openssl 1.0.0d_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.6_0 exists in the ports tree
:debug:main sqlite3 3.7.6_0  is the latest installed
:debug:main sqlite3 3.7.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0  is the latest installed
:debug:main readline 6.2.000_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6  is the latest installed
:debug:main db46 4.6.21_6  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.8.3_3 exists in the ports tree
:debug:main gdbm 1.8.3_3  is the latest installed
:debug:main gdbm 1.8.3_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0  is the latest installed
:debug:main bzip2 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_1 exists in the ports tree
:debug:main python_select 0.3_1  is the latest installed
:debug:main python_select 0.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml 5.0_0 exists in the ports tree
:debug:main docbook-xml 5.0_0  is the latest installed
:debug:main docbook-xml 5.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
:debug:main docbook-xml-4.1.2 4.1.2_1  is the latest installed
:debug:main docbook-xml-4.1.2 4.1.2_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >=
docbook-xml-4.1.2 4.1.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main xmlcatmgr 2.2_1 exists in the ports tree
:debug:main xmlcatmgr 2.2_1  is the latest installed
:debug:main xmlcatmgr 2.2_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.2 4.2_0 exists in the ports tree
:debug:main docbook-xml-4.2 4.2_0  is the latest installed
:debug:main docbook-xml-4.2 4.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.3 4.3_0 exists in the ports tree
:debug:main docbook-xml-4.3 4.3_0  is the latest installed
:debug:main docbook-xml-4.3 4.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.4 4.4_0 exists in the ports tree
:debug:main docbook-xml-4.4 4.4_0  is the latest installed
:debug:main docbook-xml-4.4 4.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.5 4.5_0 exists in the ports tree
:debug:main docbook-xml-4.5 4.5_0  is the latest installed
:debug:main docbook-xml-4.5 4.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-5.0 5.0_0 exists in the ports tree
:debug:main docbook-xml-5.0 5.0_0  is the latest installed
:debug:main docbook-xml-5.0 5.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xsl 1.76.1_0 exists in the ports tree
:debug:main docbook-xsl 1.76.1_0  is the latest installed
:debug:main docbook-xsl 1.76.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main No need to upgrade! docbook-xsl 1.76.1_0 >= docbook-xsl 1.76.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main rarian 0.8.1_0 exists in the ports tree
:debug:main rarian 0.8.1_0  is the latest installed
:debug:main rarian 0.8.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main iso-codes 3.26_0 exists in the ports tree
:debug:main iso-codes 3.26_0  is the latest installed
:debug:main iso-codes 3.26_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! iso-codes 3.26_0 >= iso-codes 3.26_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.25_2 exists in the ports tree
:debug:main pkgconfig 0.25_2  is the latest installed
:debug:main pkgconfig 0.25_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! pkgconfig 0.25_2 >= pkgconfig 0.25_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib2 2.28.8_0 exists in the ports tree
:debug:main glib2 2.28.8_0  is the latest installed
:debug:main glib2 2.28.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.12.3_1 exists in the ports tree
:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
:debug:main perl5 5.12.3_1 +perl5_12 is active
:debug:main Merging existing variants '+perl5_12' into variants
:debug:main new fully merged portvariants: perl5_12 +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default
universal variant
:debug:main Executing variant perl5_12 provides perl5_12
:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.12 5.12.3_1 exists in the ports tree
:debug:main perl5.12 5.12.3_1  is the latest installed
:debug:main perl5.12 5.12.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
:debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a
pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1
:msg:main --->  Computing dependencies for gtk-doc:info:main
.:debug:main Searching for dependency: gnome-doc-utils
:debug:main Found Dependency: receipt exists for gnome-doc-utils
:debug:main Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: glib2
:debug:main Found Dependency: receipt exists for glib2
:debug:main Searching for dependency: rarian
:debug:main Found Dependency: receipt exists for rarian
:debug:main Searching for dependency: libxml2
:debug:main Found Dependency: receipt exists for libxml2
:debug:main Searching for dependency: perl5
:debug:main Found Dependency: receipt exists for perl5
:debug:main Searching for dependency: docbook-xml
:debug:main Found Dependency: receipt exists for docbook-xml
:debug:main Searching for dependency: docbook-xsl
:debug:main Found Dependency: receipt exists for docbook-xsl
:debug:main Searching for dependency: python27
:debug:main Found Dependency: receipt exists for python27
:debug:main Searching for dependency: py27-libxml2
:debug:main Found Dependency: receipt exists for py27-libxml2
:msg:main
:debug:main Executing org.macports.main (gtk-doc)
:debug:main Skipping completed org.macports.fetch (gtk-doc)
:debug:main Skipping completed org.macports.checksum (gtk-doc)
:debug:main setting option extract.cmd to /usr/bin/bzip2
:debug:main Skipping completed org.macports.extract (gtk-doc)
:debug:main Skipping completed org.macports.patch (gtk-doc)
:msg:main --->  Configuring gtk-doc
:debug:main Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Wed Jun 22 13:47:09 CDT 2011
:debug:configure Executing org.macports.configure (gtk-doc)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2'
CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2'
LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
PERL='/opt/local/bin/perl' CXX='/usr/bin/g++-4.2'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/work/.CC_PRINT_OPTIONS'
F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.2'
FCFLAGS='-O2' INSTALL='/usr/bin/install -c'
PYTHON='/opt/local/bin/python2.7' OBJCFLAGS='-O2' FFLAGS='-O2'
CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
:debug:configure Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/work/gtk-doc-1.17"
&& ./configure --prefix=/opt/local
--with-xml-catalog=/opt/local/etc/xml/catalog'
:info:configure checking for a BSD-compatible install... /usr/bin/install -c
:info:configure checking whether build environment is sane... yes
:info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
:info:configure checking for gawk... no
:info:configure checking for mawk... no
:info:configure checking for nawk... no
:info:configure checking for awk... awk
:info:configure checking whether make sets $(MAKE)... yes
:info:configure checking whether to disable maintainer-specific
portions of Makefiles... yes
:info:configure checking whether ln -s works... yes
:info:configure checking for pkg-config... /opt/local/bin/pkg-config
:info:configure checking pkg-config is at least version 0.9.0... yes
:info:configure checking gnome-doc-utils >= 0.3.2... yes
:info:configure checking for style of include used by make... GNU
:info:configure checking for gcc... /usr/bin/gcc-4.2
:info:configure checking whether the C compiler works... yes
:info:configure checking for C compiler default output file name... a.out
:info:configure checking for suffix of executables...
:info:configure checking whether we are cross compiling... no
:info:configure checking for suffix of object files... o
:info:configure checking whether we are using the GNU C compiler... yes
:info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
:info:configure checking for /usr/bin/gcc-4.2 option to accept ISO
C89... none needed
:info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3
:info:configure checking for library containing strerror... none required
:info:configure checking for gcc... (cached) /usr/bin/gcc-4.2
:info:configure checking whether we are using the GNU C compiler... (cached) yes
:info:configure checking whether /usr/bin/gcc-4.2 accepts -g... (cached) yes
:info:configure checking for /usr/bin/gcc-4.2 option to accept ISO
C89... (cached) none needed
:info:configure checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3
:info:configure checking build system type... x86_64-apple-darwin10.7.0
:info:configure checking host system type... x86_64-apple-darwin10.7.0
:info:configure checking for a sed that does not truncate output... /usr/bin/sed
:info:configure checking for grep that handles long lines and -e...
/usr/bin/grep
:info:configure checking for egrep... /usr/bin/grep -E
:info:configure checking for fgrep... /usr/bin/grep -F
:info:configure checking for ld used by /usr/bin/gcc-4.2...
/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
:info:configure checking if the linker
(/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no
:info:configure checking for BSD- or MS-compatible name lister (nm)...
/usr/bin/nm
:info:configure checking the name lister (/usr/bin/nm) interface... BSD nm
:info:configure checking the maximum length of command line arguments... 196608
:info:configure checking whether the shell understands some XSI
constructs... yes
:info:configure checking whether the shell understands "+="... yes
:info:configure checking for
/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object
files... -r
:info:configure checking for objdump... no
:info:configure checking how to recognize dependent libraries... pass_all
:info:configure checking for ar... ar
:info:configure checking for strip... strip
:info:configure checking for ranlib... ranlib
:info:configure checking command to parse /usr/bin/nm output from
/usr/bin/gcc-4.2 object... ok
:info:configure checking for dsymutil... dsymutil
:info:configure checking for nmedit... nmedit
:info:configure checking for lipo... lipo
:info:configure checking for otool... otool
:info:configure checking for otool64... no
:info:configure checking for -single_module linker flag... yes
:info:configure checking for -exported_symbols_list linker flag... yes
:info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
:info:configure checking for ANSI C header files... yes
:info:configure checking for sys/types.h... yes
:info:configure checking for sys/stat.h... yes
:info:configure checking for stdlib.h... yes
:info:configure checking for string.h... yes
:info:configure checking for memory.h... yes
:info:configure checking for strings.h... yes
:info:configure checking for inttypes.h... yes
:info:configure checking for stdint.h... yes
:info:configure checking for unistd.h... yes
:info:configure checking for dlfcn.h... yes
:info:configure checking for objdir... .libs
:info:configure checking if /usr/bin/gcc-4.2 supports -fno-rtti
-fno-exceptions... no
:info:configure checking for /usr/bin/gcc-4.2 option to produce PIC...
-fno-common -DPIC
:info:configure checking if /usr/bin/gcc-4.2 PIC flag -fno-common
-DPIC works... yes
:info:configure checking if /usr/bin/gcc-4.2 static flag -static works... no
:info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes
:info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o...
(cached) yes
:info:configure checking whether the /usr/bin/gcc-4.2 linker
(/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared
libraries... yes
:info:configure checking dynamic linker characteristics... darwin10.7.0 dyld
:info:configure checking how to hardcode library paths into
programs... immediate
:info:configure checking whether stripping libraries is possible... yes
:info:configure checking if libtool supports shared libraries... yes
:info:configure checking whether to build shared libraries... yes
:info:configure checking whether to build static libraries... yes
:info:configure checking for pkg-config... (cached) /opt/local/bin/pkg-config
:info:configure checking pkg-config is at least version 0.19... yes
:info:configure checking for perl... /opt/local/bin/perl
:info:configure checking if Perl version >= 5.6.0... yes
:info:configure checking whether /opt/local/bin/python2.7 version >= 2.3... yes
:info:configure checking for /opt/local/bin/python2.7 version... 2.7
:info:configure checking for /opt/local/bin/python2.7 platform... darwin
:info:configure checking for /opt/local/bin/python2.7 script
directory... ${prefix}/lib/python2.7/site-packages
:info:configure checking for /opt/local/bin/python2.7 extension module
directory... ${exec_prefix}/lib/python2.7/site-packages
:info:configure checking for openjade... no
:info:configure checking for jade... no
:info:configure configure: WARNING: Could not find openjade or jade,
so SGML is not supported
:info:configure checking for xsltproc... /opt/local/bin/xsltproc
:info:configure checking for dblatex... no
:info:configure checking for fop... /opt/local/bin/fop
:info:configure checking for XML catalog (/opt/local/etc/xml/catalog)... found
:info:configure checking for xmlcatalog... /opt/local/bin/xmlcatalog
:info:configure checking for DocBook XML DTD V4.3 in XML catalog... not found
:info:configure configure: error: could not find DocBook XML DTD V4.3
in XML catalog
:info:configure shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/work/gtk-doc-1.17"
&& ./configure --prefix=/opt/local
--with-xml-catalog=/opt/local/etc/xml/catalog " returned error 1
:error:configure Target org.macports.configure returned: configure
failure: shell command failed (see log for details)
:debug:configure Backtrace: configure failure: shell command failed
(see log for details)
    while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for
gtk-doc): org.macports.activate org.macports.configure
org.macports.build org.macports.destroot org.macports.install
:notice:configure Log for gtk-doc is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/main.log