December 2007 - macports-tickets - lists.macosforge.org

[MacPorts] #13686: octave-2.9.15 doesn't compile on Leopard
by MacPorts 05 May '08

05 May '08

#13686: octave-2.9.15 doesn't compile on Leopard -------------------------------------+-------------------------------------- Reporter: charles.smart(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: octave, leopard | -------------------------------------+-------------------------------------- Octave doesn't compile from a clean install of macports on leopard. I installed macports on an otherwise blank system and then ran "sudo port install octave". After successfully building its dependencies, the following error message came out: ---> Fetching octave ---> Attempting to fetch octave-2.9.15.tar.bz2 from ftp://ftp.octave.org/pub/octave/bleeding-edge/ ---> Verifying checksum(s) for octave ---> Extracting octave ---> Applying patches to octave ---> Configuring octave ---> Building octave with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_octave/work/octave-2.9.15" && make all " returned error 2 Command output: make -C testfun all making PKG_ADD ls: *.cc: No such file or directory make -C time all making PKG_ADD ls: *.cc: No such file or directory /opt/local/bin/g++-mp-4.2 -O2 -o gethelp gethelp.cc -L/opt/local/lib ./mkdoc . > DOCSTRINGS.t mv DOCSTRINGS.t DOCSTRINGS make -C doc all making conf.texi from conf.texi.in make -C faq all makeinfo --html --ifinfo --no-split --output=Octave-FAQ.html -I.. -I. -I./.. Octave-FAQ.texi make -C interpreter all make -C ../../src DOCSTRINGS making defaults.h from defaults.h.in defaults.h is unchanged making oct-conf.h from oct-conf.h.in oct-conf.h is unchanged making DOCSTRINGS DOCSTRINGS is unchanged make -C ../../scripts DOCSTRINGS make[4]: `DOCSTRINGS' is up to date. /opt/local/bin/g++-mp-4.2 -O2 -o munge-texi munge-texi.cc -L/opt/local/lib making arith.texi from arith.txi /bin/sh: line 1: 79233 Segmentation fault ./munge-texi -d ../../src/DOCSTRINGS -d ../../scripts/DOCSTRINGS < arith.txi > arith.texi-t make[3]: *** [arith.texi] Error 139 make[2]: *** [interpreter] Error 2 make[1]: *** [doc] Error 2 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13686> MacPorts </projects/macports> Ports system for Mac OS

1 22

[MacPorts] #13576: camlimages fails to compile
by MacPorts 05 May '08

05 May '08

#13576: camlimages fails to compile ----------------------------------+----------------------------------------- Reporter: henrik(a)pilegaard.org | Owner: macports-dev(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.5.2 Keywords: | ----------------------------------+----------------------------------------- For some time now I have not been able to compile camlimages. Under Leopard (installed as upgrade from Tiger) the error shows like this:[[BR]] newhost71-069:~ hepi$ sudo port install camlimages[[BR]] ---> Fetching camlimages[[BR]] ---> Verifying checksum(s) for camlimages[[BR]] ---> Extracting camlimages[[BR]] ---> Applying patches to camlimages[[BR]] ---> Configuring camlimages[[BR]] ---> Building camlimages with target all opt[[BR]] Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_camlimages/work/camlimages-2.2" && make all opt " returned error 2[[BR]] Command output: jpegread.c:145: error: 'JCS_RGB' undeclared (first use in this function)[[BR]] jpegread.c:149: warning: implicit declaration of function 'jpeg_start_decompress' jpegread.c:165: error: 'buffer' undeclared (first use in this function)[[BR]] jpegread.c:166: error: 'j_common_ptr' undeclared (first use in this function)[[BR]] jpegread.c:166: error: 'JPOOL_IMAGE' undeclared (first use in this function)[[BR]] jpegread.c:180: warning: implicit declaration of function 'jpeg_read_scanlines'[[BR]] jpegread.c:198: warning: implicit declaration of function 'jpeg_finish_decompress'[[BR]] jpegread.c:81: warning: unused variable 'cinfo'[[BR]] jpegread.c: In function 'jpeg_set_scale_denom':[[BR]] jpegread.c:231: error: dereferencing pointer to incomplete type[[BR]] jpegread.c: In function 'open_jpeg_file_for_read':[[BR]] jpegread.c:261: error: invalid application of 'sizeof' to incomplete type 'struct jpeg_decompress_struct' [[BR]] jpegread.c:274: error: dereferencing pointer to incomplete type[[BR]] jpegread.c:295: error: 'TRUE' undeclared (first use in this function)[[BR]] jpegread.c:299: error: dereferencing pointer to incomplete type[[BR]] jpegread.c:300: error: dereferencing pointer to incomplete type[[BR]] jpegread.c: In function 'open_jpeg_file_for_read_start':[[BR]] jpegread.c:337: error: dereferencing pointer to incomplete type[[BR]] jpegread.c:337: error: 'JCS_RGB' undeclared (first use in this function)[[BR]] jpegread.c:358: error: dereferencing pointer to incomplete type[[BR]] jpegread.c:359: error: dereferencing pointer to incomplete type[[BR]] jpegread.c: In function 'read_jpeg_scanline':[[BR]] jpegread.c:380: error: 'JSAMPROW' undeclared (first use in this function)[[BR]] jpegread.c:380: error: syntax error before 'row'[[BR]] jpegread.c:384: error: 'row' undeclared (first use in this function)[[BR]] jpegread.c: In function 'close_jpeg_file_for_read':[[BR]] jpegread.c:416: error: dereferencing pointer to incomplete type[[BR]] jpegread.c:416: error: dereferencing pointer to incomplete type[[BR]] make[1]: *** [jpegread.o] Error 2[[BR]] make: *** [byt] Error 2[[BR]] Error: Status 1 encountered during processing.[[BR]] -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13576> MacPorts </projects/macports> Ports system for Mac OS

1 7

[MacPorts] #13595: poppler-0.6.3 fails on OS X 10.5 Leopard (qt4 problem?)
by MacPorts 05 May '08

05 May '08

#13595: poppler-0.6.3 fails on OS X 10.5 Leopard (qt4 problem?) ----------------------------------+----------------------------------------- Reporter: develop(a)ohlmeier.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.5.2 Keywords: | ----------------------------------+----------------------------------------- {{{ Making all in tests if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../poppler -I../.. -I../../poppler -I../../qt4/src -I../../qt -I/opt/local/include -DQT_SHARED -I/opt/local/include/qt4 -I/opt/local/include/qt4/QtCore -I/opt/local/include/qt4/QtGui -I/opt/local/include/qt4/QtXml -I/opt/local/include -Wall -Wno-unused -O2 -MT test-poppler-qt4.o -MD -MP -MF ".deps/test-poppler-qt4.Tpo" -c -o test-poppler-qt4.o test-poppler- qt4.cpp; \ then mv -f ".deps/test-poppler-qt4.Tpo" ".deps/test-poppler- qt4.Po"; else rm -f ".deps/test-poppler-qt4.Tpo"; exit 1; fi /bin/sh ../../libtool --tag=CXX --mode=link g++ -Wall -Wno-unused -O2 -L/opt/local/lib -o test-poppler-qt4 test-poppler-qt4.o ../../poppler/libpoppler.la ../../qt4/src/libpoppler-qt4.la -L/opt/local/lib -lfontconfig -lexpat -framework ApplicationServices -framework Carbon -framework AppKit -L/opt/local/lib -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_aqua_qt4-mac/work /qt-mac-opensource-src-4.3.2/lib -lQtGui -lpng -lQtXml -lQtTest -lQtCore -lz -lm -lz mkdir .libs libtool: link: cannot find the library `' or unhandled argument `Carbon' make[3]: *** [test-poppler-qt4] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 }}} This accutally is probably more a problem of qt4. At least with poppler-0.6.0 I had exactly the same problem and was able to workaround this, by telling the configure from poppler to skip the QT bindings at all. I guess the problem lays somewhere in the *.la files from qt4. -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13595> MacPorts </projects/macports> Ports system for Mac OS

1 7

[MacPorts] #13416: faad2 fails to build
by MacPorts 04 May '08

04 May '08

#13416: faad2 fails to build ----------------------------------+----------------------------------------- Reporter: ludwig(a)metaspasm.org | Owner: macports-dev(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.5.2 Keywords: faad. faad2 | ----------------------------------+----------------------------------------- faad2 fails to build on Intel 10.4.11: `` {{{ $ port -v clean faad2 ---> Cleaning faad2 ---> Removing build directory for faad2 $ port -dv install faad2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/aud… DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2 DEBUG: Requested variant i386 is not provided by port faad2. DEBUG: Requested variant macosx is not provided by port faad2. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/dev… DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Searching for dependency: libtool DEBUG: Found Dependency: receipt exists for libtool DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/dev… DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Searching for dependency: autoconf DEBUG: Found Dependency: receipt exists for autoconf DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/dev… DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: Searching for dependency: automake DEBUG: Found Dependency: receipt exists for automake DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lan… DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant darwin_8 provides darwin_8 DEBUG: Searching for dependency: perl5.8 DEBUG: Found Dependency: receipt exists for perl5.8 DEBUG: Executing org.macports.main (faad2) ---> Fetching faad2 DEBUG: Executing org.macports.fetch (faad2) ---> Verifying checksum(s) for faad2 DEBUG: Executing org.macports.checksum (faad2) ---> Checksumming faad2-2.5.tar.gz DEBUG: Correct (md5) checksum for faad2-2.5.tar.gz DEBUG: Correct (sha1) checksum for faad2-2.5.tar.gz DEBUG: Correct (rmd160) checksum for faad2-2.5.tar.gz ---> Extracting faad2 DEBUG: Executing org.macports.extract (faad2) ---> Extracting faad2-2.5.tar.gz DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/faad2/faad2-2.5.tar.gz DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work" && gzip -dc /opt/local/var/macports/distfiles/faad2/faad2-2.5.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' /usr/bin/gnutar: Read 5632 bytes from - DEBUG: Executing org.macports.patch (faad2) ---> Applying patches to faad2 ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2/files /patch-configure.in DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work/faad2" && patch -p0' patching file configure.in ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2/files /patch-Makefile.am DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work/faad2" && patch -p0' patching file Makefile.am ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2/files /patch-libfaad-common.h DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work/faad2" && patch -p0' patching file libfaad/common.h ---> Configuring faad2 DEBUG: Executing proc-pre-org.macports.configure-configure-0 autoreconf: Entering directory `.' autoreconf: configure.in: not using Gettext autoreconf: running: aclocal --force /opt/local/share/aclocal/xmms.m4:17: warning: underquoted definition of XMMS_TEST_VERSION /opt/local/share/aclocal/xmms.m4:17: run info '(automake)Extending aclocal' /opt/local/share/aclocal/xmms.m4:17: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal /opt/local/bin/gm4:configure.in:138: recursion limit of 1024 exceeded, use -L<N> to change it autom4te: /opt/local/bin/gm4 failed with exit status: 1 aclocal: autom4te failed with exit status: 1 autoreconf: aclocal failed with exit status: 1 Error: Target org.macports.configure returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work/faad2 && LIBTOOLIZE=/opt/local/bin/glibtoolize autoreconf -vif" returned error 1 Command output: autoreconf: Entering directory `.' autoreconf: configure.in: not using Gettext autoreconf: running: aclocal --force /opt/local/share/aclocal/xmms.m4:17: warning: underquoted definition of XMMS_TEST_VERSION /opt/local/share/aclocal/xmms.m4:17: run info '(automake)Extending aclocal' /opt/local/share/aclocal/xmms.m4:17: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal /opt/local/bin/gm4:configure.in:138: recursion limit of 1024 exceeded, use -L<N> to change it autom4te: /opt/local/bin/gm4 failed with exit status: 1 aclocal: autom4te failed with exit status: 1 autoreconf: aclocal failed with exit status: 1 Warning: the following items did not execute (for faad2): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. }}} -- Ticket URL: <http://trac.macports.org/projects/macports/ticket/13416> MacPorts </projects/macports> Ports system for Mac OS

1 2

[MacPorts] #13603: HDF4.2r2
by MacPorts 04 May '08

04 May '08

#13603: HDF4.2r2 -----------------------------+---------------------------------------------- Reporter: takeshi(a)mac.com | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.5.2 Keywords: | -----------------------------+---------------------------------------------- A scientific file format HDF4 needed for tcl-nap, which I will separately create a ticket. -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13603> MacPorts </projects/macports> Ports system for Mac OS

1 3

[MacPorts] #13714: still can't install boost on leopard
by MacPorts 04 May '08

04 May '08

#13714: still can't install boost on leopard --------------------------------------+------------------------------------- Reporter: tristandpeters(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: boost | --------------------------------------+------------------------------------- Despite the apparent resolution of Ticket #13223 ("Boost fails to build on leopard"), I still get the following error when building it: Building boost with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_boost/work/boost_1_34_1" && gmake all " returned error 2 Command output: Makefile:2: *** missing separator. Stop. I did a selfupdate and sync before trying again to install boost. Anyone know anything about this? Thanks -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13714> MacPorts </projects/macports> Ports system for Mac OS

1 12

[MacPorts] #13406: BUG: py25-zlib fails to build
by MacPorts 30 Apr '08

30 Apr '08

#13406: BUG: py25-zlib fails to build -----------------------------------+---------------------------------------- Reporter: takanori(a)macports.org | Owner: mww(a)macports.org Type: defect | Status: new Priority: Normal | Milestone: MacPorts 1.6 Component: ports | Version: 1.6.0 Keywords: | -----------------------------------+---------------------------------------- I tried to install py25-zlib from scratch but it failed to build. Here is my buildlog: {{{ $ port version Version: 1.600 $ port installed No ports are installed. $ sudo port install py25-zlib ---> Fetching expat ---> Verifying checksum(s) for expat ---> Extracting expat ---> Configuring expat ---> Building expat with target all ---> Staging expat into destroot ---> Installing expat 2.0.1_0 ---> Activating expat 2.0.1_0 ---> Cleaning expat ---> Fetching libiconv ---> Verifying checksum(s) for libiconv ---> Extracting libiconv ---> Applying patches to libiconv ---> Configuring libiconv ---> Building libiconv with target all ---> Staging libiconv into destroot ---> Installing libiconv 1.12_0 ---> Activating libiconv 1.12_0 ---> Cleaning libiconv ---> Fetching gettext ---> Verifying checksum(s) for gettext ---> Extracting gettext ---> Applying patches to gettext ---> Configuring gettext ---> Building gettext with target all ---> Staging gettext into destroot ---> Installing gettext 0.17_1 ---> Activating gettext 0.17_1 ---> Cleaning gettext ---> Fetching python25 ---> Verifying checksum(s) for python25 ---> Extracting python25 ---> Applying patches to python25 ---> Configuring python25 ---> Building python25 with target all ---> Staging python25 into destroot ---> Installing python25 2.5.1_3+darwin_9 ---> Activating python25 2.5.1_3+darwin_9 ---> Cleaning python25 ---> Fetching zlib ---> Verifying checksum(s) for zlib ---> Extracting zlib ---> Applying patches to zlib ---> Configuring zlib ---> Building zlib with target all ---> Staging zlib into destroot ---> Installing zlib 1.2.3_1 ---> Activating zlib 1.2.3_1 ---> Cleaning zlib ---> Fetching py25-zlib ---> Verifying checksum(s) for py25-zlib ---> Extracting py25-zlib ---> Configuring py25-zlib ---> Building py25-zlib with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-zlib/work/Python-2.5.1/Modules" && /opt/local/bin/python2.5 setup.py build " returned error 1 Command output: running build running build_ext building 'zlib' extension creating build creating build/temp.macosx-10.3-ppc-2.5 -DNDEBUG -D__DARWIN_UNIX03 -I/opt/local/include -I/opt/local/include/python2.5 -c zlibmodule.c -o build/temp.macosx-10.3-ppc-2.5/zlibmodule.o unable to execute -DNDEBUG: No such file or directory error: command '-DNDEBUG' failed with exit status 1 Error: Status 1 encountered during processing. }}} This problem only occurs at the first time, so that's odd. {{{ $ port installed The following ports are currently installed: expat @2.0.1_0 (active) gettext @0.17_1 (active) libiconv @1.12_0 (active) python25 @2.5.1_3+darwin_9 (active) zlib @1.2.3_1 (active) $ sudo port install py25-zlib ---> Building py25-zlib with target build ---> Staging py25-zlib into destroot ---> Installing py25-zlib 2.5.1_0 ---> Activating py25-zlib 2.5.1_0 ---> Cleaning py25-zlib }}} I'm guessing this may be a bug in MacPorts 1.6(-rc2) since this problem does not occur on MacPorts 1.5.2. -- Ticket URL: <https://trac.macports.org/projects/macports/ticket/13406> MacPorts </projects/macports> Ports system for Mac OS

1 6

[MacPorts] #13718: pear-base can't update/install
by MacPorts 29 Apr '08

29 Apr '08

#13718: pear-base can't update/install -------------------------------------------+-------------------------------- Reporter: forums(a)jefferyfernandez.id.au | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 1.6.0 Keywords: pear-base pear | -------------------------------------------+-------------------------------- I have installed pear-base port and here is the log for it: bash-3.2# port install pear-base ---> Fetching pear-base ---> Verifying checksum(s) for pear-base ---> Extracting pear-base ---> Configuring pear-base ---> Building pear-base with target all ---> Staging pear-base into destroot ---> Installing pear-base 1.6.2_0 ---> Activating pear-base 1.6.2_0 ---> Cleaning pear-base bash-3.2# pear list (no packages installed from channel pear.php.net) bash-3.2# pear install DB WARNING: "pear/DB" is deprecated in favor of "pear/MDB2" WARNING: channel "pear.php.net" has updated its protocols, use "channel- update pear.php.net" to update Did not download optional dependencies: pear/XML_RPC, use --alldeps to download automatically pear/PEAR can optionally use package "pear/XML_RPC" (version >= 1.4.0) downloading DB-1.7.13.tgz ... Starting to download DB-1.7.13.tgz (132,246 bytes) .....................done: 132,246 bytes downloading PEAR-1.6.2.tgz ... Starting to download PEAR-1.6.2.tgz (297,794 bytes) ...done: 297,794 bytes downloading Archive_Tar-1.3.2.tgz ... Starting to download Archive_Tar-1.3.2.tgz (17,150 bytes) ...done: 17,150 bytes downloading Structures_Graph-1.0.2.tgz ... Starting to download Structures_Graph-1.0.2.tgz (30,947 bytes) ...done: 30,947 bytes downloading Console_Getopt-1.2.3.tgz ... Starting to download Console_Getopt-1.2.3.tgz (4,011 bytes) ...done: 4,011 bytes Warning: PEAR_Downloader::require_once(Structures/Graph.php): failed to open stream: No such file or directory in Downloader.php on line 1230 PHP Warning: PEAR_Downloader::require_once(Structures/Graph.php): failed to open stream: No such file or directory in /opt/local/lib/php/PEAR/Downloader.php on line 1230 PHP Fatal error: PEAR_Downloader::require_once(): Failed opening required 'Structures/Graph.php' (include_path='/opt/local/lib/php') in /opt/local/lib/php/PEAR/Downloader.php on line 1230 ############################################################## Problem is I cannot install any pear packages because of the above error. Is this an upstream problem or something wrong with the setup of pear-base port? -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13718> MacPorts </projects/macports> Ports system for Mac OS

1 5

[MacPorts] #13568: fails to compile on dual core 64 bit machines under OS X v10.5.1
by MacPorts 28 Apr '08

28 Apr '08

#13568: fails to compile on dual core 64 bit machines under OS X v10.5.1 -----------------------------------+---------------------------------------- Reporter: spector(a)zeitgeist.com | Owner: macports-dev(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.5.2 Keywords: | -----------------------------------+---------------------------------------- cinnabar.ny.zeitgeist.com % sudo port install p5-graphviz Password: ---> Building perl5.8 with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/work/perl-5.8.8" && make all " returned error 2 Command output: cc -L/opt/local/lib -L/usr/local/lib -force_flat_namespace -o miniperl \ miniperlmain.o opmini.o libperl.a -ldl -lm -lutil -lc ld: warning in /usr/local/lib/libgcc_s.10.5.dylib, missing required architecture i386 in file ld: in /usr/local/lib/libgcc_s.1.dylib, missing required architecture i386 in file collect2: ld returned 1 exit status make: *** [miniperl] Error 1 Error: The following dependencies failed to build: p5-graph p5-heap perl5.8 p5-ipc-run p5-math-bezier Error: Status 1 encountered during processing. cinnabar.ny.zeitgeist.com % perl -version This is perl, v5.8.8 built for darwin-thread-multi-2level -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13568> MacPorts </projects/macports> Ports system for Mac OS

1 3

[MacPorts] #13554: python25 doesn't build on leopard
by MacPorts 28 Apr '08

28 Apr '08

#13554: python25 doesn't build on leopard --------------------------------------------+------------------------------- Reporter: macports(a)halloleo.hailmail.net | Owner: macports-dev(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.5.2 Keywords: | --------------------------------------------+------------------------------- sudo port install python25 stops with the following error report: {{{ Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_python25/work/Python-2.5.1" && make all " returned error 2 Command output: gcc -fno-strict-aliasing -Wno-long-double -no-cpp-precomp -mno-fused-madd -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -I. -I./Include -I/opt/local/include -DDARWIN_UNIX03 -DPy_BUILD_CORE -c ./Modules/posixmodule.c -o Modules/posixmodule.o ./Modules/posixmodule.c: In function 'posix_setpgrp': ./Modules/posixmodule.c:3724: error: too few arguments to function 'setpgrp' make: *** [Modules/posixmodule.o] Error 1 Error: The following dependencies failed to build: gimp-app gimp2 py25-gtk py25-cairo py25-numeric python25 py25-gobject gimp-jp2 openjpeg cmake gimp-lqr-plugin gimp-user-manual gtk-nodoka-engine coreutils gutenprint icns-gimp macclipboard-gimp macfile-gimp ufraw exiv2 xsane sane-backends libusb Error: Status 1 encountered during processing. }}} -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/13554> MacPorts </projects/macports> Ports system for Mac OS

1 7