October 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #15931: python25 neffectual reinplace
by MacPorts 07 Oct '10

07 Oct '10

#15931: python25 neffectual reinplace -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: mww(a)macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- Using MacPorts trunk and the patch in #15514 I see this message when installing python25: {{{ ---> Fetching python25 ---> Attempting to fetch Python-2.5.2.tgz from http://distfiles.macports.org/python25 ---> Verifying checksum(s) for python25 ---> Extracting python25 ---> Applying patches to python25 Warning: reinplace s|/Applications/MacPython|/Applications/MacPorts/MacPython|g didn't change anything in Mac/IDLE/Makefile.in ---> Configuring python25 ---> Building python25 with target all libpython2.5.dylib ---> Staging python25 into destroot ---> Installing python25 @2.5.2_5+darwin_8 ---> Activating python25 @2.5.2_5+darwin_8 To fully complete your installation and make python 2.5 the default, please run sudo port install python_select sudo python_select python25 ---> Cleaning python25 }}} Perhaps the reinplace needs to be adjusted, or perhaps that file does not need to be patched. -- Ticket URL: <http://trac.macports.org/ticket/15931> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15886: xephem 3.7.2_0 violates the layout of the ports-filesystems
by MacPorts 07 Oct '10

07 Oct '10

#15886: xephem 3.7.2_0 violates the layout of the ports-filesystems ----------------------------------+----------------------------------------- Reporter: jrtomshine(a)yahoo.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: Component: ports | Version: 1.6.0 Keywords: xephem | ----------------------------------+----------------------------------------- {{{ ---> Fetching xephem ---> Attempting to fetch xephem-3.7.2.tar.gz from http://www.clearskyinstitute.com/xephem/ ---> Verifying checksum(s) for xephem ---> Extracting xephem ---> Configuring xephem ---> Building xephem ---> Staging xephem into destroot Warning: violation by /usr Warning: xephem violates the layout of the ports-filesystems! Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases! ---> Installing xephem 3.7.2_0 ---> Activating xephem 3.7.2_0 ---> Cleaning xephem }}} If this error is causing non-standard files & directories to be created in my filesystem, how can I clean up after these changes? Will macports delete the nonstandard files & directories when the package is removed? Thanks, Jon -- Ticket URL: <http://trac.macports.org/ticket/15886> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15790: Missing dependencies for Gerris
by MacPorts 07 Oct '10

07 Oct '10

#15790: Missing dependencies for Gerris -----------------------------+---------------------------------------------- Reporter: tom.duck(a)dal.ca | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gerris | -----------------------------+---------------------------------------------- The Gerris port is missing dependencies. If it would help, then I can address these with some instruction from you on the preferred approach. I have proposed solutions at the end. Here is what is missing: 1) If openmpi or some such thing is available for multiprocessing, Gerris will compile with it. It seems reasonable to include this as a variant. 2) The Gerris example program cylinder.gfs in /opt/local/share/doc/gerris/cylinder is dependent on the 'ppmtoy4m' utility provided by the mjpegtools,and the 'convert' utility from imagemagick. These are not listed as dependencies. Note: Execution instructions for each example program are given at http://gfs.sourceforge.net/examples/examples/index.html. 3) When running the example programs as described on the Web site, the output from Gerris is often piped to one of the GfsView companion programs. There is no port for GfsView at this time. 4) The example program pipeline also makes use of ppmtompeg, which is provided by the netpbm packages and not currently listed as a dependency. There may be other issues, but I won't know until these are addressed so that I can run the examples. One way to deal with issues 2-4 is to create an 'examples' variant that separately installs the example programs along with the dependencies. Alternatively, the examples can be installed as is, but with additional dependencies listed for the base install. If it would be help, then I can prepare a patch for Gerris and a new port for GfsView. Just please let me know which you consider to be the best alternative. -- Ticket URL: <http://trac.macports.org/ticket/15790> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15711: scons 0.98.4 fails to build latex files
by MacPorts 07 Oct '10

07 Oct '10

#15711: scons 0.98.4 fails to build latex files -------------------------------+-------------------------------------------- Reporter: jjakuze(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- $ scons --version SCons by Steven Knight et al.: script: v0.98.4.r2949, 2008/05/17 23:07:00, by knight on bangkok engine: v0.98.4.r2949, 2008/05/17 23:07:00, by knight on bangkok $ cat SConstruct dvi = DVI('example.tex') $ scons AttributeError: SConsEnvironment instance has no attribute 'DVI': -- Ticket URL: <http://trac.macports.org/ticket/15711> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15678: mysql_install_db5 failed
by MacPorts 07 Oct '10

07 Oct '10

#15678: mysql_install_db5 failed --------------------------------------------+------------------------------- Reporter: s.willkommer(a)techdivision.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: mysql_install_db5 failed mysql | --------------------------------------------+------------------------------- i'm trying this for about a couple of days without success. everytime the same error. but from the front. i've installed php5 apache2 and mysql5 with the this tutorial [http://samuraicoder.net/installing_php_and_mysql_leopard_macports_prealpha] Everything is fine but when i try to install the system db tables with following command {{{ sudo -u mysql mysql_install_db5 }}} i got this error {{{ Installing MySQL system tables... ERROR: 1062 Duplicate entry 'localhost-' for key 1 080619 17:35:19 [ERROR] Aborting 080619 17:35:19 [Note] /opt/local/libexec/mysqld: Shutdown complete Installation of system tables failed! Examine the logs in /opt/local/var/db/mysql5 for more information. You can try to start the mysqld daemon with: /opt/local/libexec/mysqld --skip-grant & and use the command line tool /opt/local/lib/mysql5/bin/mysql to connect to the mysql database and look at the grant tables: shell> /opt/local/lib/mysql5/bin/mysql -u root mysql mysql> show tables Try 'mysqld --help' if you have problems with paths. Using --log gives you a log in /opt/local/var/db/mysql5 that may be helpful. The latest information about MySQL is available on the web at http://www.mysql.com Please consult the MySQL manual section: 'Problems running mysql_install_db', and the manual section that describes problems on your OS. Another information source is the MySQL email archive. Please check all of the above before mailing us! And if you do mail us, you MUST use the /opt/local/lib/mysql5/bin/mysqlbug script! }}} If I try to connect I got an access denied error. I've tried to delete the databases under /opt/local/var/db/mysql5/ and installed again without success. I have the macports 1.6.0 an a mac osx completely new installed with all updates (10.5.3) . Last week we installed it on three other macs in our company and it works perfectly. Im totally helpless about that. Thanks for your help -- Ticket URL: <http://trac.macports.org/ticket/15678> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15621: Installation of epiphany fails on 10.4/PPC
by MacPorts 07 Oct '10

07 Oct '10

#15621: Installation of epiphany fails on 10.4/PPC --------------------------------------------------+------------------------- Reporter: dbonde+bugs+macosforge.org(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------------------------+------------------------- Installation of epiphany fails on 10.4/PPC with the error message below: ./configure: line 22906: test: =: unary operator expected checking for poptStrippedArgv in -lpopt... yes checking popt.h usability... yes checking popt.h presence... yes checking for popt.h... yes checking pkg-config is at least version 0.9.0... yes checking for BONOBOUI... configure: error: Package requirements (libgnomecanvas-2.0 >= 1.116.0 libbonobo-2.0 >= 2.13.0 libgnome-2.0 >= 2.13.7 bonobo-activation-2.0 >= 2.13.0 libxml-2.0 >= 2.4.20 gconf-2.0 >= 1.1.9 gtk+-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0 gnome-vfs-2.0 >= 2.8.0 gnome-vfs-module-2.0 > 2.8.0) were not met: Package freetype2 was not found in the pkg-config search path. Perhaps you should add the directory containing `freetype2.pc' to the PKG_CONFIG_PATH environment variable Package 'freetype2', required by 'cairo', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables BONOBOUI_CFLAGS and BONOBOUI_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Error: The following dependencies failed to build: gnome-desktop libgnomeui libbonoboui py25-gnome py25-gtk py25-cairo py25-numpy fftw-3 py25-orbit startup-notification libgnomeprintui libgnomeprint bison libgnomecups Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/15621> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #15573: build of vile on leopard 10.5.3 failed
by MacPorts 07 Oct '10

07 Oct '10

#15573: build of vile on leopard 10.5.3 failed ------------------------------------+--------------------------------------- Reporter: tomhirashima(a)yahoo.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: vile, ncurses | ------------------------------------+--------------------------------------- {{{ $ sudo port install vile ---> Fetching vile ---> Verifying checksum(s) for vile ---> Extracting vile ---> Configuring vile Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_editors_vile/work/vile-9.5" && ./configure --prefix=/opt/local --with-perl --with-ncurses --mandir=/opt/local/share/man " returned error 1 Command output: checking if we may include sys/resource.h with sys/wait.h... no checking for termio.h... (cached) no checking for termios.h... (cached) yes checking for unistd.h... (cached) yes checking whether termios.h needs _POSIX_SOURCE... no checking declaration of size-change... yes checking for file-pointer ready definition... ( (p)->_r > 0) checking for <wctype.h> and functions... yes checking for library containing wctype... none required checking for long file names... yes checking for restartable reads on pipes... yes checking whether setpgrp takes no argument... yes checking whether getpgrp takes no argument... yes checking if killpg is needed... no checking if external errno is declared... yes checking if external errno exists... yes checking if external sys_nerr is declared... yes checking if external sys_nerr exists... yes checking if external sys_errlist is declared... yes checking if external sys_errlist exists... yes checking for screen type... termcap checking if you want to use ncurses... yes checking for ncurses header in include-path... ncurses/curses.h checking for ncurses version... 5.6.20061217 checking for Gpm_Open in -lgpm... no checking for initscr... no checking for initscr in -lncurses... no checking for -lncurses in /opt/local/lib... no checking for -lncurses in /usr/lib... no configure: error: Cannot link ncurses library Error: Status 1 encountered during processing. }}} -- Ticket URL: <http://trac.macports.org/ticket/15573> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15584: nqc: universal variant doesn't work
by MacPorts 07 Oct '10

07 Oct '10

#15584: nqc: universal variant doesn't work -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- nqc +universal builds without complaint, but the installed binaries end up just having the local architecture. MacPorts from trunk, Mac OS X 10.4.11 Intel, Xcode 2.4.1. -- Ticket URL: <http://trac.macports.org/ticket/15584> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15412: Can totem-video-thumbnailer be made into a separate package?
by MacPorts 06 Oct '10

06 Oct '10

#15412: Can totem-video-thumbnailer be made into a separate package? -------------------------------+-------------------------------------------- Reporter: macports(a)flyn.org | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Low | Milestone: Port Enhancements Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- The totem-video-thumbnailer utilitiy is useful even if someone does not wish to use the entire totem package. Could this component be split into a different package so that it may be installed without totem? -- Ticket URL: <http://trac.macports.org/ticket/15412> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #16367: llvm-devel +clang mtree violation
by MacPorts 06 Oct '10

06 Oct '10

#16367: llvm-devel +clang mtree violation -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: pguyot(a)kallisys.net Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- {{{ $ port install llvm-devel +clang ---> Fetching llvm-devel ---> Verifying checksum(s) for llvm-devel ---> Extracting llvm-devel ---> Applying patches to llvm-devel ---> Configuring llvm-devel ---> Building llvm-devel ---> Staging llvm-devel into destroot Warning: violation by /opt/local/Headers Warning: llvm-devel violates the layout of the ports-filesystems! Warning: Please fix or indicate this misbehavior (if it is intended), it will be an error in future releases! ---> Installing llvm-devel @53722_1+clang ---> Activating llvm-devel @53722_1+clang ---> Cleaning llvm-devel $ }}} -- Ticket URL: <http://trac.macports.org/ticket/16367> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3