April 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #15081: dbus failure to start after crash
by MacPorts 21 Apr '08

21 Apr '08

#15081: dbus failure to start after crash ------------------------------------+--------------------------------------- Reporter: ld-temp-q6x8(a)pobox.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------------+--------------------------------------- There is already a ticket (14163) related to this issue, but it hasn't been updated in 2 months and I can't figure out how to annotate it. After a forced reboot, dbus doesn't automatically restart because the PID file, /opt/local/var/run/dbus/pid, doesn't get deleted. Since dbus is running as a launchd job, this file isn't needed and shouldn't exist. The launchd item itself and the system.conf files also need to be changed. There's no need for the dbus.wrapper script, which seems to be a relic of pre-launchd times. dbus-daemon should be called directly from org.macports.dbus.plist, and the lines in system.conf that cause it to drop privileges, fork into the background, and write a PID file should be removed. I'll try to attach proposed replacements for org.macports.dbus.plist and system.conf to this ticket. Thanks. -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/15081> MacPorts </projects/macports> Ports system for Mac OS

1 0

[MacPorts] #14731: p5-getopt-long 2.37_0 cannot be staged into destroot
by MacPorts 21 Apr '08

21 Apr '08

#14731: p5-getopt-long 2.37_0 cannot be staged into destroot -----------------------------+---------------------------------------------- Reporter: stephan(a)yauh.de | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -----------------------------+---------------------------------------------- During an install of gnucash on an intel iMac using OS X 10.5.2 I ran into a problem staging p5-getopt-long into destroot. I checked before and this port was not installed before, so it appears the perl58 port already brings its own version of getopt-long. However, this behavior is rather irritating, especially since there is getopt-long inside the base port for perl plus an additional port with a potentially newer version. {{{ ---> Staging p5-getopt-long into destroot You must install or activate this package with '-f' (force) as it needs to overwrite files installed by the perl5.8 port ---> Installing p5-getopt-long 2.37_0 ---> Activating p5-getopt-long 2.37_0 Error: Target org.macports.activate returned: Image error: /opt/local/lib/perl5/5.8.8/Getopt/Long.pm is being used by the active perl5.8 port. Please deactivate this port first, or use the -f flag to force the activation. Error: Status 1 encountered during processing. }}} -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/14731> MacPorts </projects/macports> Ports system for Mac OS

1 2

[MacPorts] #14744: libsdl_mixer-framework 1.2.8 seems to be broken; I hope this is no duplicate.
by MacPorts 21 Apr '08

21 Apr '08

#14744: libsdl_mixer-framework 1.2.8 seems to be broken; I hope this is no duplicate. ------------------------------+--------------------------------------------- Reporter: phw(a)macports.org | Owner: nox(a)macports.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------+--------------------------------------------- Trying to isntall libsdl_mixer-framework it crashes for me. OS is 10.5.2, Problem occurs on Intel as on PowerPc. {{{ sudo port install libsdl_mixer-framework ---> Building libsdl_mixer-framework Error: Target org.macports.build returned: shell command "cd "/opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8" && xcodebuild -project Xcode/SDL_mixer.xcodeproj -target "Framework" -configuration Deployment build OBJROOT=build/ SYMROOT=build/ " returned error 1 Command output: _native_midi_start in native_midi_mac.o "_SDL_OpenAudio", referenced from: _Mix_OpenAudio in mixer.o "_SDL_ReadBE16", referenced from: _WAVStream_LoadSong in wavestream.o _WAVStream_LoadSong in wavestream.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o "_SDL_ReadBE32", referenced from: _WAVStream_LoadSong in wavestream.o _WAVStream_LoadSong in wavestream.o _WAVStream_LoadSong in wavestream.o _WAVStream_LoadSong in wavestream.o _WAVStream_LoadSong in wavestream.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o _Mix_LoadAIFF_RW in load_aiff.o ld: symbol(s) not found collect2: ld returned 1 exit status CompileC build/SDL_mixer.build/Deployment/Framework.build/Objects- normal/i386/mlutil.o /opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8/Xcode/../mikmod/mlutil.c normal i386 c com.apple.compilers.gcc.4_0 cd /opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8/Xcode /Developer/usr/bin/gcc-4.0 -x c -arch i386 -pipe -Wno-trigraphs -fpascal-strings -fasm-blocks -Os -DMACOSX -D__MACOSX__ -DUSE_RWOPS -DCMD_MUSIC -DWAV_MUSIC -DMOD_MUSIC -DMID_MUSIC -DUSE_TIMIDITY_MIDI -DUSE_NATIVE_MIDI -DOGG_MUSIC -fmessage-length=0 -mmacosx-version-min=10.4 -I/opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8/Xcode/build/SDL_mixer.build/Deployment/Framework.build/SDL_mixer.hmap -Wall -Wno-four-char-constants -F/opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8/Xcode/build/Deployment -F/Users/phw/Library/Frameworks -F/Developer/SDKs/MacOSX10.4u.sdk/Library/Frameworks -I/opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8/Xcode/build/Deployment/include -I/Users/phw/Library/Frameworks/SDL.framework/Headers -I/Developer/SDKs/MacOSX10.4u.sdk/Library/Frameworks/SDL.framework/Headers -Ivorbis/include -Ismpeg/include -I/opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8/Xcode/build/SDL_mixer.build/Deployment/Framework.build/DerivedSources -isysroot /Developer/SDKs/MacOSX10.4u.sdk -c /opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8/Xcode/../mikmod/mlutil.c -o /opt/local/var/macports/build /_opt_local_svn_trunk_dports_audio_libsdl_mixer- framework/work/SDL_mixer-1.2.8/Xcode/build/SDL_mixer.build/Deployment/Framework.build /Objects-normal/i386/mlutil.o ** BUILD FAILED ** Error: Status 1 encountered during processing. }}} -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/14744> MacPorts </projects/macports> Ports system for Mac OS

1 2

[MacPorts] #14305: Making gtk2 +quartz depend on pango +no_x11
by MacPorts 21 Apr '08

21 Apr '08

#14305: Making gtk2 +quartz depend on pango +no_x11 -----------------------------------------+---------------------------------- Reporter: shreevatsa.public(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: gtk2 pango cairo x11 quartz | -----------------------------------------+---------------------------------- Currently, installing "port install gtk2 +quartz" does not build pango with +no_x11, which results in applications building fine, but then having no visible text in any of their dialogs. Since quartz and x11 conflict everywhere (including libs like cairo that pango depends on), it is safe and a good idea to make gtk2's +quartz build pango with +no_x11. Attached is a patch of the gtk2 Portfile that does that. -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/14305> MacPorts </projects/macports> Ports system for Mac OS

1 12

[MacPorts] #15078: No solution :(
by MacPorts 21 Apr '08

21 Apr '08

#15078: No solution :( ------------------------------+--------------------------------------------- Reporter: akfaka(a)yahoo.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ------------------------------+--------------------------------------------- Thanks everyone for the replies. So far I havn't gotten a solution. I just want to uninstall everything to make my Mac clean. It seems that everything were installed in the opt directiory, if I trash the opt directory, would that be enough? Are there other directories needed to be cleaned up? -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/15078> MacPorts </projects/macports> Ports system for Mac OS

1 1

[MacPorts] #14706: postgresql83-server / bugfix / directory location wrong
by MacPorts 21 Apr '08

21 Apr '08

#14706: postgresql83-server / bugfix / directory location wrong ----------------------------------+----------------------------------------- Reporter: dirkx(a)webweaving.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | ----------------------------------+----------------------------------------- Pathc below is needed as initdb is otherwise confused about its relative path. Dw. {{{ *** Portfile.org 2008-03-18 17:38:23.000000000 +0100 --- Portfile 2008-03-18 17:39:38.000000000 +0100 *************** *** 50,56 **** ui_msg "\nTo create a database instance, after install do\n\ sudo mkdir -p ${dbdir}\n\ sudo chown ${dbuser}:${dbgrp} ${dbdir}\n\ ! sudo su ${dbuser} -c \'${libdir}/bin/initdb -D ${dbdir}\'" ui_msg "\nTo tweak your DBMS, consider increasing kern.sysv.shmmax\ by adding an increased kern.sysv.shmmax .. to /etc/sysctl.conf" } --- 50,56 ---- ui_msg "\nTo create a database instance, after install do\n\ sudo mkdir -p ${dbdir}\n\ sudo chown ${dbuser}:${dbgrp} ${dbdir}\n\ ! ( cd ${prefix}; sudo su ${dbuser} -c \'${libdir}/bin/initdb -D ${dbdir}\' )" ui_msg "\nTo tweak your DBMS, consider increasing kern.sysv.shmmax\ by adding an increased kern.sysv.shmmax .. to /etc/sysctl.conf" } }}} -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/14706> MacPorts </projects/macports> Ports system for Mac OS

1 2

[MacPorts] #14643: KDE3 install fail (kdeutils)
by MacPorts 21 Apr '08

21 Apr '08

#14643: KDE3 install fail (kdeutils) ----------------------------------------+----------------------------------- Reporter: k0l0b0k.void(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: kdeutils kde install error | ----------------------------------------+----------------------------------- Hi All! I'm trying to install kde3 on my Intel Mac Leopard 10.5.2 (just for fun :), and gives this error on kdeutils installing step: {{{ Error: Target org.macports.destroot returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdeutils3/work/kdeutils-3.5.8 && ./InstallScript.sh" returned error 1 Command output: MACOSX_DEPLOYMENT_TARGET: $MACOSX_DEPLOYMENT_TARGET PATH: $PATH PKG_CONFIG_PATH: $PKG_CONFIG_PATH CONFIGURE_PARAMS: $CONFIGURE_PARAMS UNSERMAKEFLAGS: $UNSERMAKEFLAGS MAKEFLAGS: $MAKEFLAGS END the following environment is being used: ACLOCALFLAGS: CFLAGS: -Os -fPIC CPPFLAGS: -I/opt/local/include/freetype2 -I/opt/local/include -fno-common -no-cpp-precomp -DMACOSX -DARTS_NO_ALARM -I/opt/local/include -I/usr/X11R6/include CXXFLAGS: -Os -fPIC FREETYPE_CONFIG: /opt/local/bin/freetype-config LDFLAGS: -L/opt/local/lib -Wl,-dylib_file,/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib:/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib LIBS: -L/opt/local/lib -L/usr/X11R6/lib MACOSX_DEPLOYMENT_TARGET: 10.5 PATH: /opt/local/bin:/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/X11R6/bin PKG_CONFIG_PATH: /opt/local/lib/pkgconfig: CONFIGURE_PARAMS: --includedir=/opt/local/include --libdir=/opt/local/lib --prefix=/opt/local --with-extra- libs=/opt/local/lib --with-extra-includes=/opt/local/include --enable-mt --with-pic --enable-rpath --enable-shared=yes --enable-static=no --mandir=/opt/local/share/man --with-xinerama --with-pam --disable-final --with-ssl-dir=/opt/local --with-ssl --disable-dependency-tracking --enable-gcc-hidden-visibility --with-qt-dir=/opt/local/lib/qt3 UNSERMAKEFLAGS: -p MAKEFLAGS: ./build-helper.sh install kdeutils3 3.5.8 0 unsermake -p -j1 install DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdeutils3/work/destroot kgpg_SUBDIR_included_TRUE='#' kgpg_SUBDIR_included_FALSE= 01% 20% 20% 20% 25% 26% installing ./kdelirc/irkick/irkick.la install: ./kdelirc/irkick/.libs/irkick.lai: No such file or directory Error creating /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdeutils3/work/destroot/opt/local/lib/kde3/irkick.la. Exit status 71. kdeutils3-3.5.8-0 install failed! Error: The following dependencies failed to build: kdeutils3 Error: Status 1 encountered during processing. }}} And so, resolve this trouble is difficult for me at now, because Midnight Commander, installed by macports (thanks!) distorts their view when trying to show this folder: _opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdeutils3 (may be it is very long for him?) -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/14643> MacPorts </projects/macports> Ports system for Mac OS

1 1

[MacPorts] #14453: Trac ticket opened and modified dates are displayed in vague format
by MacPorts 20 Apr '08

20 Apr '08

#14453: Trac ticket opened and modified dates are displayed in vague format ------------------------------+--------------------------------------------- Reporter: jmr(a)macports.org | Owner: wsiegrist(a)apple.com Type: defect | Status: new Priority: Normal | Milestone: Website & Documentation Component: server/hosting | Version: Keywords: | ------------------------------+--------------------------------------------- When viewing a ticket on Trac, the dates when the ticket was opened and last modified are shown in a very approximate (and relative) fashion, e.g. '3 months ago'. It is often useful to know the exact date and time when a ticket was opened, for example, to know if a commit went in before or after the ticket was opened. I would therefore like a full timestamp to be displayed, as it is on the change history entries. If people like having the information that is conveyed by the approximate relative date, it can be kept as well. Put it in parentheses after the timestamp or something. Might as well do that on the change history and attachments as well. -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/14453> MacPorts </projects/macports> Ports system for Mac OS

1 4

[MacPorts] #15065: license link title has typo
by MacPorts 20 Apr '08

20 Apr '08

#15065: license link title has typo ---------------------------------+------------------------------------------ Reporter: llattanzi(a)apple.com | Owner: jmpp(a)macports.org Type: defect | Status: new Priority: Low | Milestone: Component: website | Version: 1.6.0 Keywords: | ---------------------------------+------------------------------------------ Creative Commons At'''''r'''''ribution 2.5 License -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/15065> MacPorts </projects/macports> Ports system for Mac OS

1 4

[MacPorts] #15074: python_select-0.1 - wrong python-config symlink for python25
by MacPorts 20 Apr '08

20 Apr '08

#15074: python_select-0.1 - wrong python-config symlink for python25 --------------------------------+------------------------------------------- Reporter: frodwith(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | --------------------------------+------------------------------------------- when running python_select python25, python_select makes a symlink to python-config2.5 instead of python2.5-config, and thus python-config doesn't work properly. -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/15074> MacPorts </projects/macports> Ports system for Mac OS

1 2