March 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #28503: Failed to install kdenetwork3 and kde on snowleopard (10.6.6)
by MacPorts 02 Mar '11

02 Mar '11

#28503: Failed to install kdenetwork3 and kde on snowleopard (10.6.6) -------------------------------+-------------------------------------------- Reporter: sibanda@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: -------------------------------+-------------------------------------------- Installation of kde fails with the failure of building kdenetwork3 Here is what I do and the results after a several of building {{{ [sibanda@sibanda:~]$ sudo port install kde ---> Computing dependencies for kde ---> Dependencies to be installed: kdenetwork3 ---> Fetching kdenetwork3 ---> Verifying checksum(s) for kdenetwork3 ---> Extracting kdenetwork3 ---> Configuring kdenetwork3 ---> Building kdenetwork3 Error: Target org.macports.build returned: shell command failed (see log for details) Error: Failed to install kdenetwork3 Log for kdenetwork3 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdenetwork3/main.log Error: The following dependencies were not installed: kdenetwork3 Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> [sibanda@sibanda:~]$ }}} and I attach the log file. Please note that I had installed kde before on this machine without problem... after some resent updates that I did a week ago a lot of things stopped working and I thought the solution was to clean up and do a fresh install but hey-ho! put myself in a lot of trouble... -- Ticket URL: <https://trac.macports.org/ticket/28503> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #28573: fltk-devel update, fix universal build
by MacPorts 02 Mar '11

02 Mar '11

#28573: fltk-devel update, fix universal build -------------------------------------+-------------------------------------- Reporter: jarno.rajahalme@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: fltk-devel -------------------------------------+-------------------------------------- This update addresses several issues: 1. Updated to the newest fltk 1.3 weekly snapshot (1.3.x-r8472), that contains important fixes for OSX builds: - Given proper configure args fltk actually builds as universal, and fltk- config no longer reports any -arch flags. See [http://fltk.org/newsgroups.php?s10749+gfltk.development+v10762+T0] - This, and an earlier fix in fltk header files (to not include OSX system headers, e.g. Objective-C headers, when compiling an application, see [http://fltk.org/newsgroups.php?s10369+gfltk.development+v10385+T0] allows '''FLTK Applications''' to be compiled with non-Apple GCC versions (such as the various MacPorts toolchains). As an example, the new release of GNU Octave uses FLTK. These changes allow Octave to be built with gcc-mp-4.5, even though FLTK itself must be built with Apple GCC 4.2. 2. Updated the Portfile to pass arch flags only via --with-archflags, i.e. the same flags are removed from CFLAGS, etc. Without this change fltk- config still reports the archflags, which makes it hard to build e.g. an 64-bit app using universal fltk dylib. 3. Make universal variant the default, so other ports can depend on this, and build successfully, be them 32 or 64-bit applications. 4. 64-bit builds no longer require any patching of ./configure. 5. fltk 1.3 no longer depends on any external libs, so it has no dependencies. 6. Fixed livecheck to work -- Ticket URL: <https://trac.macports.org/ticket/28573> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

Re: [MacPorts] #12605: BUG: devel/ncurses does not provide libcurses and <curses.h>
by MacPorts 02 Mar '11

02 Mar '11

#12605: BUG: devel/ncurses does not provide libcurses and <curses.h> ---------------------------------+------------------------------------------ Reporter: master@… | Owner: jmr@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.5.0 Resolution: | Keywords: Port: ncurses ncursesw | ---------------------------------+------------------------------------------ Changes (by jmr@…): * cc: imajes@… (removed) * owner: imajes@… => jmr@… * status: reopened => new * port: => ncurses ncursesw Comment: I didn't see this before because it was assigned to the old maintainer (and didn't have the Port field set due to age). -- Ticket URL: <https://trac.macports.org/ticket/12605#comment:10> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

[MacPorts] #28598: New installation can't read "build.cmd": Failed to locate 'make'
by MacPorts 02 Mar '11

02 Mar '11

#28598: New installation can't read "build.cmd": Failed to locate 'make' ---------------------------------+------------------------------------------ Reporter: taylor@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: build.cmd make path | Port: geany ---------------------------------+------------------------------------------ I am a new user of an iMAC with OSX 10.6.4 My Xcode is in /Developer/Library/Xcode I have installed MacPorts.dmg by running the binary installer. I synched the index successfully. After doing port selfupdate I tried installing Geany MacPorts complained as follows:- MrsMac:~ davidtaylor$ sudo port -v install geany Computing dependencies for geany......Error: Unable to execute port: can't read "build.cmd": Failed to locate 'make' in path: '/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin' or at its MacPorts configuration time location, did you move it? To report a bug, see <http://guide.macports.org/#project.tickets> -- Ticket URL: <https://trac.macports.org/ticket/28598> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #28600: pdf2svg @0.2.1_5 - master_site download location moved
by MacPorts 02 Mar '11

02 Mar '11

#28600: pdf2svg @0.2.1_5 - master_site download location moved -----------------------------------+---------------------------------------- Reporter: jimmy@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: -----------------------------------+---------------------------------------- It looks like the author has moved the location of the source download. The current location is: {{{http://www.cityinthesky.co.uk/_media/opensource/pdf2svg-0.2.1.tar.gz}}} Suggested patch: {{{ 16c16 < master_sites http://www.cityinthesky.co.uk/files/ --- > master_sites http://www.cityinthesky.co.uk/_media/opensource/ }}} Running Snow Leopard 10.6.6 Build output: {{{ sh-3.2# port install pdf2svg ---> Computing dependencies for pdf2svg ---> Fetching pdf2svg ---> Attempting to fetch pdf2svg-0.2.1.tar.gz from http://www.cityinthesky.co.uk/files/ ---> Verifying checksum(s) for pdf2svg Error: Checksum (md5) mismatch for pdf2svg-0.2.1.tar.gz Error: Checksum (sha1) mismatch for pdf2svg-0.2.1.tar.gz Error: Checksum (rmd160) mismatch for pdf2svg-0.2.1.tar.gz *** The non-matching file appears to be HTML. See this page for possible reasons for the checksum mismatch: <http://trac.macports.org/wiki/MisbehavingServers> *** Error: Target org.macports.checksum returned: Unable to verify file checksums }}} -- Ticket URL: <https://trac.macports.org/ticket/28600> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #28548: gperf @3.0.4 checksum failure
by MacPorts 02 Mar '11

02 Mar '11

#28548: gperf @3.0.4 checksum failure ------------------------------+--------------------------------------------- Reporter: vasco@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: gperf ------------------------------+--------------------------------------------- Mac OSX 10.6.6 Intel {{{sudo port -d install gperf DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS darwin/10.6.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gperf/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf/work DEBUG: Starting logging for gperf DEBUG: Executing org.macports.main (gperf) ---> Fetching gperf DEBUG: fetch phase started at Fri Feb 25 22:54:55 CET 2011 DEBUG: Executing org.macports.fetch (gperf) ---> Verifying checksum(s) for gperf DEBUG: checksum phase started at Fri Feb 25 22:54:55 CET 2011 DEBUG: Executing org.macports.checksum (gperf) ---> Checksumming gperf-3.0.4.tar.gz Error: Checksum (md5) mismatch for gperf-3.0.4.tar.gz Portfile checksum: gperf-3.0.4.tar.gz md5 c1f1db32fb6598d6a93e6e88796a8632 Distfile checksum: gperf-3.0.4.tar.gz md5 3776e8d50514e6dc8da22f2cd40eda22 Error: Checksum (sha1) mismatch for gperf-3.0.4.tar.gz Portfile checksum: gperf-3.0.4.tar.gz sha1 e32d4aff8f0c730c9a56554377b2c6d82d0951b8 Distfile checksum: gperf-3.0.4.tar.gz sha1 daea0c944556275675f03c33fb01844883382bc0 Error: Checksum (rmd160) mismatch for gperf-3.0.4.tar.gz Portfile checksum: gperf-3.0.4.tar.gz rmd160 aeaed644501d2424f88d203dd68c997b6a90f116 Distfile checksum: gperf-3.0.4.tar.gz rmd160 ca3d7616bfe6340c62e36707120045272292cd9a The correct checksum line may be: checksums md5 3776e8d50514e6dc8da22f2cd40eda22 \ sha1 daea0c944556275675f03c33fb01844883382bc0 \ rmd160 ca3d7616bfe6340c62e36707120045272292cd9a Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums while executing "$procedure $targetname" Warning: the following items did not execute (for gperf): org.macports.activate org.macports.checksum org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Log for gperf is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gperf/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} -- Ticket URL: <https://trac.macports.org/ticket/28548> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #24025: p5-module-build conflicts with perl5.10
by MacPorts 02 Mar '11

02 Mar '11

#24025: p5-module-build conflicts with perl5.10 --------------------------------+------------------------------------------- Reporter: dluke@… | Owner: narf_tm Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: p5-module-build --------------------------------+------------------------------------------- both ports attempt to install ${prefix}/bin/config_data -- Ticket URL: <http://trac.macports.org/ticket/24025> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 16

Re: [MacPorts] #14923: python25 +universal fails to compile Mac OS 10.4
by MacPorts 02 Mar '11

02 Mar '11

#14923: python25 +universal fails to compile Mac OS 10.4 --------------------------+------------------------------------------------- Reporter: wjb@… | Owner: jwa@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.5.2 Resolution: wontfix | Keywords: tiger Port: python25 | --------------------------+------------------------------------------------- Changes (by jwa@…): * status: new => closed * resolution: => wontfix Comment: Well, we are long past Python 2.5, the recommended Python 2 is now 2.7. I myself don't have 10.4 anymore around, so I can't test it. In Python 2.7 the universal builds are already taken into account in upstream code, so that is better from the start. -- Ticket URL: <https://trac.macports.org/ticket/14923#comment:11> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

Re: [MacPorts] #13092: OpenSSH authentication broken on Leopard (PAM unable to create session)
by MacPorts 02 Mar '11

02 Mar '11

#13092: OpenSSH authentication broken on Leopard (PAM unable to create session) -----------------------------------+---------------------------------------- Reporter: callahad@… | Owner: jwa@… Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.5.0 Keywords: | Port: openssh -----------------------------------+---------------------------------------- Changes (by jwa@…): * status: new => assigned Comment: Does this issue still exist? I don't have a Leopard system in use, so testing this would be impossible. If this bugs SL, too, then it would be nice to have steps to reproduce this behaviour in order to fix. -- Ticket URL: <https://trac.macports.org/ticket/13092#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 0

[MacPorts] #20632: gnumeric-v1.8.4 execSQL function missing - conflict with libgda-3.0 portfile version
by MacPorts 02 Mar '11

02 Mar '11

#20632: gnumeric-v1.8.4 execSQL function missing - conflict with libgda-3.0 portfile version -------------------------------+-------------------------------------------- Reporter: yakitch@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 1.7.1 Keywords: | Port: -------------------------------+-------------------------------------------- gnumeric v1.8.4 does not register execSQL function since Portfile requires libgda-3.0 for versions 3.1 and up which is not offered on macports. Possible solutions - lower the version limit in gumeric Portfile for libgda-3.0 - upgrade version of libgda-3.0 on macports to 3.1.x or higher - move forward to upgrade gnumeric to use libgda-4.0 version. -- Ticket URL: <http://trac.macports.org/ticket/20632> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5