May 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #29238: parrot new version 3.3.0
by MacPorts 13 Jun '11

13 Jun '11

#29238: parrot new version 3.3.0 ------------------------------+--------------------------------------------- Reporter: l2g@… | Owner: bfulgham@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: parrot ------------------------------+--------------------------------------------- Version 3.3.0 of Parrot was released a few days ago (April 19), and it has been designated a "supported" release. I've played with it by building it and running its tests, and while a number of tests fail that are "TODO" tests, I also get one test failure that isn't a TODO: test number 27 in t/dynpmc/os.t. If I can figure it out before you all do, I will follow up here. -- Ticket URL: <https://trac.macports.org/ticket/29238> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 9

[MacPorts] #26970: devel/dbus non-root daemon does not load on 10.4
by MacPorts 12 Jun '11

12 Jun '11

#26970: devel/dbus non-root daemon does not load on 10.4 ----------------------------------------+----------------------------------- Reporter: rmstonecipher@… | Owner: mcalhoun@… Type: defect | Status: new Priority: Low | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: dbus ----------------------------------------+----------------------------------- The second instruction output to users {{{ launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist }}} does not work on 10.4.[[br]] The following error is output to my terminal: {{{ launchctl: CFURLWriteDataAndPropertiesToResource(/Library/LaunchAgents/org.freedesktop .dbus-session.plist) failed: -10 }}} Is there any special command non-root users should use to run this non- root-oriented daemon on 10.4?[[br]] -- Ticket URL: <https://trac.macports.org/ticket/26970> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #27744: wxWidgets-devel lib has incorrect install name
by MacPorts 12 Jun '11

12 Jun '11

#27744: wxWidgets-devel lib has incorrect install name -----------------------------------------+---------------------------------- Reporter: singingwolfboy@… | Owner: jwa@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: wxWidgets-devel -----------------------------------------+---------------------------------- I'm developing a new port that relies on a lib installed by wxWidgets- devel, and I'm getting this error when I try to run it: {{{ dbaumgold:src baumgold$ ./bitcoin dyld: Library not loaded: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_graphics_wxWidgets- devel/work/wxWidgets-2.9.1/build/lib/libwx_osx_cocoau-2.9.1.0.0.dylib Referenced from: /opt/local/var/macports/build/_Users_baumgold_Dropbox_ports_crypto_bitcoin/work/bitcoin-0.3.19/src/./bitcoin Reason: image not found Trace/BPT trap }}} A quick google search revealed that this seems to be the fault of the wxWidgets-devel port. (http://lists.apple.com/archives/xcode- users/2009/aug/msg00165.html) Apparently, dynamic libraries have an "install name" that is used when dynamically linking from other software. libwx_osx_cocoau-2.9.1.0.0.dylib has an incorrect install name, at least on my system: {{{ dbaumgold:bitcoin-0.3.19 baumgold$ otool -D /opt/local/lib/wx- devel/libwx_osx_cocoau-2.9.1.0.0.dylib /opt/local/lib/wx-devel/libwx_osx_cocoau-2.9.1.0.0.dylib: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_graphics_wxWidgets- devel/work/wxWidgets-2.9.1/build/lib/libwx_osx_cocoau-2.9.1.0.0.dylib }}} This should be fixed so that other applications can build and run against this library. Other libraries in this port may have the same issue, but I haven't tested. For reference, I'm running 10.6.5 on an Intel Macbook Pro. -- Ticket URL: <https://trac.macports.org/ticket/27744> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #29536: p5-datetime-format-iso8601: new version 0.07
by MacPorts 12 Jun '11

12 Jun '11

#29536: p5-datetime-format-iso8601: new version 0.07 ------------------------------+--------------------------------------------- Reporter: l2g@… | Owner: mat@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: haspatch | Port: p5-datetime-format-iso8601 ------------------------------+--------------------------------------------- The latest version of DateTime::Format::ISO8601 is 0.07, released 2010-01-17. Attached is a patch to upgrade the port. -- Ticket URL: <https://trac.macports.org/ticket/29536> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #29540: Add pm-http-date to macports
by MacPorts 12 Jun '11

12 Jun '11

#29540: Add pm-http-date to macports --------------------------------------+------------------------------------- Reporter: brian.gupta@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: --------------------------------------+------------------------------------- I am missing HTTP/Date.pm, which is needed for a certain script I am running. -- Ticket URL: <https://trac.macports.org/ticket/29540> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #28865: p5-libwww-perl: new version 6.01, which is now in multiple modules distributed separately
by MacPorts 12 Jun '11

12 Jun '11

#28865: p5-libwww-perl: new version 6.01, which is now in multiple modules distributed separately ------------------------------+--------------------------------------------- Reporter: l2g@… | Owner: narf_tm@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: p5-libwww-perl ------------------------------+--------------------------------------------- Gisle Aas broke up the libwww-perl distribution into multiple distributions. (About time?) So here is the new libwww-perl 6.x family: * [http://search.cpan.org/~gaas/libwww-perl/ libwww-perl] * [http://search.cpan.org/~gaas/Encode-Locale/ Encode-Locale] * [http://search.cpan.org/~gaas/File-Listing/ File-Listing] * [http://search.cpan.org/~gaas/HTTP-Cookies/ HTTP-Cookies] * [http://search.cpan.org/~gaas/HTTP-Daemon/ HTTP-Daemon] * [http://search.cpan.org/~gaas/HTTP-Date/ HTTP-Date] * [http://search.cpan.org/~gaas/HTTP-Message/ HTTP-Message] * [http://search.cpan.org/~gaas/HTTP-Negotiate/ HTTP-Negotiate] * [http://search.cpan.org/~gaas/LWP-MediaTypes/ LWP-MediaTypes] * [http://search.cpan.org/~gaas/Net-HTTP/ Net-HTTP] * [http://search.cpan.org/~gaas/WWW-RobotRules/ WWW-RobotRules] Read the Changes file in libwww-perl, as it mentions some changes with potential to break compatibility in existing scripts that use LWP. I've played with making portfiles for all of these and can attach them here. -- Ticket URL: <https://trac.macports.org/ticket/28865> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #23343: trouble installing gettext on Snow leopard
by MacPorts 12 Jun '11

12 Jun '11

#23343: trouble installing gettext on Snow leopard ------------------------------------+--------------------------------------- Reporter: CelindaVielh@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: ------------------------------------+--------------------------------------- I'm in trouble installing gettext on Snow Leopard:[[BR]] sudo port -d install gettext +universal[[BR]] [...][[BR]] ---> Configuring gettext[[BR]] DEBUG: Using compiler 'Mac OS X gcc 4.2'[[BR]] DEBUG: Executing proc-pre-org.macports.configure-configure-0[[BR]] Error: You cannot install gettext for the architecture(s) x86_64 i386 because[[BR]] Error: its dependency libiconv only contains the architecture(s) cputype 16777223 cpusubtype 3.[[BR]] Error: Target org.macports.configure returned: incompatible architectures in dependencies[[BR]] DEBUG: Backtrace: incompatible architectures in dependencies[[BR]] while executing[[BR]] "$pre $targetname"[[BR]] Warning: the following items did not execute (for gettext): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing.[[BR]] and: bash-3.2$ sudo port installed libiconv[[BR]] The following ports are currently installed: libiconv @1.13_0+universal (active) I have tried the installation with and without the option +universal, always the same error. I'don't know how to solve this problem. thanks a lot for your help. -- Ticket URL: <http://trac.macports.org/ticket/23343> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 14

[MacPorts] #18937: Subversion 1.6.0 fails to build
by MacPorts 12 Jun '11

12 Jun '11

#18937: Subversion 1.6.0 fails to build ---------------------------------+------------------------------------------ Reporter: vinc17@… | Owner: dluke@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: subversion ---------------------------------+------------------------------------------ "sudo port -v upgrade subversion" gives the following error: {{{ /bin/sh /opt/local/var/macports/build/_Users_vinc17_software_dports_devel_subversion/work/subversion-1.6.0/libtool --tag=CC --silent --mode=compile /usr/bin/gcc-4.0 -I/opt/local/include -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -O2 -I./subversion/include -I./subversion -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/include/neon -I/opt/local/include -I/opt/local/include/serf-0 -o subversion/libsvn_fs_fs/tree.lo -c subversion/libsvn_fs_fs/tree.c /bin/sh /opt/local/var/macports/build/_Users_vinc17_software_dports_devel_subversion/work/subversion-1.6.0/libtool --tag=CC --silent --mode=compile /usr/bin/gcc-4.0 -I/opt/local/include -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -O2 -I./subversion/include -I./subversion -I/opt/local/include/apr-1 -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/include/neon -I/opt/local/include -I/opt/local/include/serf-0 -o subversion/libsvn_fs_util/fs-util.lo -c subversion/libsvn_fs_util/fs-util.c cd subversion/libsvn_fs_util && /bin/sh /opt/local/var/macports/build/_Users_vinc17_software_dports_devel_subversion/work/subversion-1.6.0/libtool --tag=CC --silent --mode=link /usr/bin/gcc-4.0 -O2 -L/opt/local/lib -L/opt/local/lib/db46 -L/opt/local/lib -L/opt/local/lib -rpath /opt/local/lib -o libsvn_fs_util-1.la fs-util.lo ../../subversion/libsvn_subr/libsvn_subr-1.la /opt/local/lib/libaprutil-1.la -ldb-4.6 -lexpat -liconv /opt/local/lib/libapr-1.la -lpthread -lintl -framework Security -framework CoreFoundation -framework CoreServices ERROR: No debug map or DWARF data was found to link.cd subversion/libsvn_fs_fs && /bin/sh /opt/local/var/macports/build/_Users_vinc17_software_dports_devel_subversion/work/subversion-1.6.0/libtool --tag=CC --silent --mode=link /usr/bin/gcc-4.0 -O2 -L/opt/local/lib -L/opt/local/lib/db46 -L/opt/local/lib -L/opt/local/lib -rpath /opt/local/lib -o libsvn_fs_fs-1.la caching.lo dag.lo err.lo fs.lo fs_fs.lo id.lo key-gen.lo lock.lo rep-cache.lo tree.lo ../../subversion/libsvn_delta/libsvn_delta-1.la ../../subversion/libsvn_subr/libsvn_subr-1.la /opt/local/lib/libaprutil-1.la -ldb-4.6 -lexpat -liconv /opt/local/lib/libapr-1.la -lpthread ../../subversion/libsvn_fs_util/libsvn_fs_util-1.la -lintl -framework Security -framework CoreFoundation -framework CoreServices ld: Undefined symbols: _svn_error__malfunction referenced from libsvn expected to be defined in libsvn _svn_checksum_ctx_create referenced from libsvn expected to be defined in libsvn _svn_checksum_final referenced from libsvn expected to be defined in libsvn _svn_checksum_update referenced from libsvn expected to be defined in libsvn /usr/bin/libtool: internal link edit command failed make: *** [subversion/libsvn_fs_fs/libsvn_fs_fs-1.la] Error 1 }}} -- Ticket URL: <http://trac.macports.org/ticket/18937> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 28

[MacPorts] #27245: base: option to list file sizes in `contents` action
by MacPorts 11 Jun '11

11 Jun '11

#27245: base: option to list file sizes in `contents` action --------------------------------+------------------------------------------- Reporter: ww.galen@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: base | Version: 1.9.2 Keywords: haspatch | Port: --------------------------------+------------------------------------------- Here's a simple but (hopefully) useful feature for the `contents` action: optionally include file sizes in the list of files in a port. The patch adds support for this action, as well as options that specify the default units for sizes: -K for KiB, -M for MiB, -B for bytes. These options are applicable to other (such as another proposed feature, ticket #27244, to include an action to list the disk space used by an active port), which is why they are global options rather than action flags. -- Ticket URL: <https://trac.macports.org/ticket/27245> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #25115: Upgrade drush package to latest version (3.0)
by MacPorts 11 Jun '11

11 Jun '11

#25115: Upgrade drush package to latest version (3.0) ---------------------------------------+------------------------------------ Reporter: henrik.sjokvist@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: drush ---------------------------------------+------------------------------------ Drush version 3.0 has been out for a while. Here's an updated Portfile: http://gist.github.com/324809 -- Ticket URL: <http://trac.macports.org/ticket/25115> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3