June 2011 - macports-tickets - lists.macosforge.org

[MacPorts] #27921: aclocal.m4 version conflict with libtool
by MacPorts 04 Jul '11

04 Jul '11

#27921: aclocal.m4 version conflict with libtool ---------------------------------------------------------+------------------ Reporter: whittaker007@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: aclocal.m4 libtool LT_INIT version conflict | Port: ---------------------------------------------------------+------------------ Several ports cannot be installed due to LT_INIT being built with an older version of libtool (2.2.6b) than the one currently installed (2.4). This causes failure to install at least the following two ports, and most likely several others: * gd2 * graphviz In both of these cases the reported error was practically the same: {{{ :info:build libtool: Version mismatch error. This is libtool 2.4, but the :info:build libtool: definition of this LT_INIT comes from libtool 2.2.6b. :info:build libtool: You should recreate aclocal.m4 with macros from libtool 2.4 :info:build libtool: and run autoconf again. }}} Based on other suggestions while looking for possible solutions, I have tried: {{{ $ sudo port sync $ port outdated No installed ports are outdated. $ sudo port clean --work gd2 ---> Cleaning gd2 $ port installed autoconf automake gettext libiconv libtool The following ports are currently installed: autoconf @2.65_0 autoconf @2.68_1 (active) automake @1.11.1_0 (active) gettext @0.17_4 gettext @0.18.1.1_2 (active) libiconv @1.13_0 libiconv @1.13.1_0 (active) libtool @2.2.6b_0 libtool @2.4_0 (active) }}} But the install always fails: {{{ $ sudo port install gd2 ---> Computing dependencies for gd2 ---> Fetching gd2 ---> Verifying checksum(s) for gd2 ---> Extracting gd2 ---> Applying patches to gd2 ---> Configuring gd2 ---> Building gd2 Error: Target org.macports.build returned: shell command failed (see log for details) Log for gd2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_gd2/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} }}} -- Ticket URL: <https://trac.macports.org/ticket/27921> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8

[MacPorts] #28414: wine-crossover-games: update to 10.0.0
by MacPorts 04 Jul '11

04 Jul '11

#28414: wine-crossover-games: update to 10.0.0 -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: jeremyhu@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: wine-crossover-games -------------------------------------+-------------------------------------- {{{ $ port livecheck wine-crossover-games wine-crossover-games seems to have been updated (port version: 9.2.0, new version: 10.0.0) }}} -- Ticket URL: <https://trac.macports.org/ticket/28414> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #29137: GraphViz Port on Snow Leopard
by MacPorts 04 Jul '11

04 Jul '11

#29137: GraphViz Port on Snow Leopard ----------------------------------+----------------------------------------- Reporter: brett@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: ----------------------------------+----------------------------------------- ---> Fetching libxml2 ---> Attempting to fetch libxml2-2.7.8.tar.gz from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libxml2 ---> Verifying checksum(s) for libxml2 ---> Extracting libxml2 ---> Configuring libxml2 Error: The file /opt/local/lib/libz.dylib does not exist, though it was Error: expected to have been provided by one of libxml2's dependencies. Try Error: rebuilding the port that should have provided that file by running Error: Error: sudo port -n upgrade --force <portname> Error: Error: Target org.macports.configure returned: missing required file Log for libxml2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_libxml2/main.log Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade xorg-libXaw failed To report a bug, see <http://guide.macports.org/#project.tickets> -- Ticket URL: <https://trac.macports.org/ticket/29137> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #29221: py26-pyqt3 fails to patch py26-sip-qt3
by MacPorts 04 Jul '11

04 Jul '11

#29221: py26-pyqt3 fails to patch py26-sip-qt3 --------------------------------+------------------------------------------- Reporter: ptmkenny@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: --------------------------------+------------------------------------------- When I tried to install py26-pyqt3, it failed to patch py26-sip-qt3. I'm using 10.6.7. sudo port install py26-pyqt3---> Computing dependencies for py26-sip-qt3 ---> Fetching py26-sip-qt3 ---> Verifying checksum(s) for py26-sip-qt3 ---> Extracting py26-sip-qt3 ---> Applying patches to py26-sip-qt3 ---> Configuring py26-sip-qt3 Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for py26-sip-qt3 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26 -sip-qt3/main.log Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade py26-sip-qt3 failed To report a bug, see <http://guide.macports.org/#project.tickets> -- Ticket URL: <https://trac.macports.org/ticket/29221> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #25678: Update the tor port from version 0.2.1.25 to version 0.2.1.26
by MacPorts 04 Jul '11

04 Jul '11

#25678: Update the tor port from version 0.2.1.25 to version 0.2.1.26 ----------------------------------+----------------------------------------- Reporter: swordangel@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: tor ----------------------------------+----------------------------------------- tor 0.2.1.26 stable has been released for over 2 months. The update features better defense against connection overload, and fixes issues with broken OpenSSL libraries. The complete release notes can be found there: https://blog.torproject.org/blog/tor-02126-stable-released -- Ticket URL: <http://trac.macports.org/ticket/25678> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #25676: Can't install perl5.12 on PPC Mac
by MacPorts 04 Jul '11

04 Jul '11

#25676: Can't install perl5.12 on PPC Mac -------------------------------+-------------------------------------------- Reporter: vendion@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: -------------------------------+-------------------------------------------- When I try to install perl5.12 on my PowerBook G4 running 10.5.8 it errors out with the following output: Odin:~ vendion$ sudo port install perl5.12 Password: ---> Computing dependencies for perl5.12 ---> Staging perl5.12 into destroot Error: No files have been installed in the destroot directory! Error: Please make sure that this software supports 'make install DESTDIR=${destroot}' or implement an alternative destroot mechanism in the Portfile. Error: Files might have been installed directly into your system, check before proceeding. Error: Target org.macports.destroot returned: can't read "portname": no such variable Log for perl5.12 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.12/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> -- Ticket URL: <http://trac.macports.org/ticket/25676> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #25639: py26-attr install fails
by MacPorts 04 Jul '11

04 Jul '11

#25639: py26-attr install fails ------------------------------+--------------------------------------------- Reporter: gbjune@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: py26-attr ------------------------------+--------------------------------------------- Error: Target org.macports.fetch returned: Subversion check out failed Log for py26-xattr is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-xattr/main.log Error: The following dependencies failed to build: py26-xattr Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> Content of log file: version:1 :debug:main Executing org.macports.main (py26-xattr) :msg:main ---> Fetching py26-xattr :debug:fetch fetch phase started at Sun Jul 11 23:49:31 CEST 2010 :debug:fetch Executing org.macports.fetch (py26-xattr) :debug:fetch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-xattr/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:fetch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-xattr/work" && /usr/bin/svn --non-interactive --trust-server-cert export http://svn .red-bean.com/bob/xattr/releases/xattr-0.5/' :info:fetch svn: Mismatched RA version for 'http': found 1.6.2, expected 1.6.5 :info:fetch shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-xattr/work" && /usr/bin/svn --non-interactive --trust-server-cert export http://svn .red-bean.com/bob/xattr/releases/xattr-0.5/ 2>&1" returned error 1 :error:fetch Target org.macports.fetch returned: Subversion check out failed :debug:fetch Backtrace: Subversion check out failed while executing "svnfetch" (procedure "portfetch::fetch_main" line 13) invoked from within "$procedure $targetname" :info:fetch Warning: the following items did not execute (for py26-xattr): org.macports.activate org.macports.fetch org.macports.checksum org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:fetch Log for py26-xattr is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-xattr/main.log -- Ticket URL: <http://trac.macports.org/ticket/25639> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #25631: bro 1.2 revision 2 fails to build
by MacPorts 04 Jul '11

04 Jul '11

#25631: bro 1.2 revision 2 fails to build --------------------------------------+------------------------------------- Reporter: nonstop.server@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: bug net security | Port: bro --------------------------------------+------------------------------------- Bro fails to build. OS Version:[[BR]] Darwin 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 Xcode Version:[[BR]] 3.1.4 (Universal) Please see the attached log files for a complete list of error messages.[[BR]] Summary of error messages from the build: {{{ checking for ANSI C header files... ./bifcl ./common-rw.bif make[2]: ./bifcl: Command not found make[2]: *** [common-rw.bif.func_h] Error 127 make[2]: *** Waiting for unfinished jobs.... yes map.h:63: error: syntax error before 'el_func_t' map.h:63: warning: no semicolon at end of struct or union map.h:65: error: syntax error before '}' token map.h:65: warning: data definition has no type or storage class In file included from chared.c:54: el.h:127: error: syntax error before 'el_map_t' el.h:127: warning: no semicolon at end of struct or union el.h:132: error: syntax error before '}' token chared.c: In function 'cv_undo': chared.c:65: error: dereferencing pointer to incomplete type chared.c: In function 'c_insert': chared.c:85: error: dereferencing pointer to incomplete type chared.c:444: error: 'ED_UNASSIGNED' undeclared (first use in this function) common.c:406: error: 'EM_UNIVERSAL_ARGUMENT' undeclared (first use in this function) make[3]: *** [common.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: *** [chared.o] Error 1 make[2]: *** [libedit/libedit.a] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 }}} -- Ticket URL: <http://trac.macports.org/ticket/25631> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #25625: bro 1.2 revision 2 request to upgrade to release 1.5
by MacPorts 04 Jul '11

04 Jul '11

#25625: bro 1.2 revision 2 request to upgrade to release 1.5 --------------------------------------+------------------------------------- Reporter: nonstop.server@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: net security | Port: bro --------------------------------------+------------------------------------- Request to upgrade port bro to the latest release (version 1.5). -- Ticket URL: <http://trac.macports.org/ticket/25625> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #28786: benchmarks/polygraph @4.3.1 build failure
by MacPorts 03 Jul '11

03 Jul '11

#28786: benchmarks/polygraph @4.3.1 build failure ----------------------------------+----------------------------------------- Reporter: pixilla@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: polygraph ----------------------------------+----------------------------------------- Build errors with: {{{ ../../src/xstd/Select.h: In member function 'bool FD_Set::isSet(int) const': ../../src/xstd/Select.h:29: error: invalid conversion from 'const fd_set*' to 'fd_set*' ../../src/xstd/Select.h:29: error: initializing argument 2 of 'int __darwin_fd_isset(int, fd_set*)' ../../src/xstd/Select.h: In member function 'bool FD_Set::isReady(int) const': ../../src/xstd/Select.h:30: error: invalid conversion from 'const fd_set*' to 'fd_set*' ../../src/xstd/Select.h:30: error: initializing argument 2 of 'int __darwin_fd_isset(int, fd_set*)' mv -f .deps/Rnd.Tpo .deps/Rnd.Po /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I../.. -I../../src -I../.. -I../../src -I/opt/macports-test/include -I/usr/include -pipe -O2 -arch i386 -MT Size.o -MD -MP -MF .deps/Size.Tpo -c -o Size.o Size.cc make[3]: *** [Select.o] Error 1 }}} Port log attached. -- Ticket URL: <https://trac.macports.org/ticket/28786> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7