October 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #41052: Portfile patch - upgrade x264 from 2013-03-27 to 2013-10-28
by MacPorts 29 Oct '13

29 Oct '13

#41052: Portfile patch - upgrade x264 from 2013-03-27 to 2013-10-28 ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: x264 ---------------------+-------------------------------- This x264 update allows full support some of several subtle new features in ffmpeg-2.1 (ticket #41051). -- Ticket URL: <https://trac.macports.org/ticket/41052> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #38850: In wxmaxima with wxwidgets-devel the ^-operator not usable
by MacPorts 29 Oct '13

29 Oct '13

#38850: In wxmaxima with wxwidgets-devel the ^-operator not usable --------------------+--------------------------------------- Reporter: mk@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: wxmaxima, wxwidgets-devel --------------------+--------------------------------------- I have these ports installed {{{ $ port installed wx* The following ports are currently installed: wxMaxima @12.01.0_0 (active) wxMaxima @12.01.0_0+wxwidgets_devel wxWidgets @2.8.12_3 (active) wxWidgets-devel @2.9.4_4+sdl }}} Turns out that wxmaxima with wxwidgets works fine, but when trying to run the combination wxmaxima+wxwidgets_devel with wxwidgets-devel I can't enter the caret-character which I need if I want to specify the power in an equation. What's going on here? Tested on Snow Leopard. -- Ticket URL: <https://trac.macports.org/ticket/38850> MacPorts <http://www.macports.org/> Ports system for OS X

1 35

[MacPorts] #40853: g++ 4.3 and 4.4 are broken wrt exception handling
by MacPorts 29 Oct '13

29 Oct '13

#40853: g++ 4.3 and 4.4 are broken wrt exception handling -----------------------------+-------------------------------- Reporter: akim.demaille@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: gcc43 gcc44 -----------------------------+-------------------------------- Hi, First a disclaimer: I _think_ that this used to work before, but no longer does. I tend to think that it used to work, because the test suite of Bison was all green a few months back, but today there are fails because of the following failure. It might have something to do with the libgcc changes, but I could not find an "obsolete" machine on which I could check this. And also, I understand that these compilers are old. On the following test case: {{{ #include <iostream> #include <stdexcept> void foo() { try { throw std::runtime_error("foo"); } catch (...) { std::cerr << "Inner caught" << std::endl; throw; } } int main() { try { foo(); } catch (...) { std::cerr << "Outer caught unknown" << std::endl; } } }}} neither g++-mp-4.3 nor 4.4 produce a functioning executable: {{{ $ g++-mp-4.3 exc.cc && ./a.out Inner caught zsh: abort ./a.out $ g++-mp-4.4 exc.cc && ./a.out Inner caught zsh: abort ./a.out $ g++-mp-4.5 exc.cc && ./a.out Inner caught Outer caught unknown $ g++-mp-4.6 exc.cc && ./a.out Inner caught Outer caught unknown $ g++-mp-4.7 exc.cc && ./a.out Inner caught Outer caught unknown $ g++-mp-4.8 exc.cc && ./a.out Inner caught Outer caught unknown $ g++-mp-4.9 exc.cc && ./a.out Inner caught Outer caught unknown $ exc.cc && ./a.out }}} I'm using libgcc-devel, but trying with libgcc didn't change. -- Ticket URL: <https://trac.macports.org/ticket/40853> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #40888: tuntaposx @20111101 fails to build on Mavericks
by MacPorts 29 Oct '13

29 Oct '13

#40888: tuntaposx @20111101 fails to build on Mavericks --------------------+-------------------------------- Reporter: john@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: tuntaposx --------------------+-------------------------------- Error is: {{{ :info:build /usr/bin/clang++ -Wall -mkernel -force_cpusubtype_ALL -fno- builtin -fno-stack-protector -arch x86_64 -DKERNEL -D__APPLE__ -DKERNEL_PRIVATE -DTUNTAP_VERSION=\"20111101\" -DTUN_KEXT_VERSION=\"20111101\" -I.. -I/System/Library/Frameworks/Kernel.framework/Headers -c .> :info:build In file included from In file included from ../tuntap.cc../tuntap.cc::3030: :info:build In file included from : :info:build In file included from ../tuntap.h:35: :info:build ../tuntap.h:35: :info:build ../lock.h:35:10: ../lock.h:35:fatal error: 'kern/locks.h' file not found10: fatal error: 'kern/locks.h' file not found :info:build :info:build #include <kern/locks.h> :info:build ^ :info:build #include <kern/locks.h> :info:build ^ :info:build 1 error generated. :info:build 1 error generated. }}} (full log attached.) It looks as though there no longer is a `/System/Library/Frameworks/Kernel.framework/Headers`. If I replace that with `/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/Kernel.framework/Versions/A/Headers` the build seems fine, but I'm not sure off hand how to do that in a portable way. -- Ticket URL: <https://trac.macports.org/ticket/40888> MacPorts <http://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #41063: XBMC build failed in Mavericks
by MacPorts 29 Oct '13

29 Oct '13

#41063: XBMC build failed in Mavericks -----------------------------+-------------------------------- Reporter: igor.kurtovic@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: Mavericks | Port: XBMC -----------------------------+-------------------------------- MAvericks, fresh ports installation and i chose XBMC installation. this happens: :info:build /bin/sh -c \"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_XBMC/XBMC/work/XBMC/build/XBMC.build/Release/build\ XBMCHelper.build/Script-F57E20100E3BCD8100700C9D.sh\" :info:build building XBMCHelper :info:build rm -f -rf *.o XBMCHelper :info:build g++ -c -isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx- version-min=10.4 -Wall iremoted.c -o iremoted.o :info:build g++: failed to exec /Applications/Xcode.app/Contents/Developer/usr/bin/clang++: No such file or directory :info:build make: *** [iremoted.o] Error 71 :info:build cp: XBMCHelper: No such file or directory :info:build :info:build ** BUILD FAILED ** :info:build :info:build :info:build The following build commands failed: :info:build PhaseScriptExecution Run\ Script build/XBMC.build/Release/build\ XBMCHelper.build/Script- F57E20100E3BCD8100700C9D.sh :info:build (1 failure) :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_XBMC/XBMC/work/XBMC" && /usr/bin/xcodebuild -project XBMC.xcodeproj -target "build XBMCHelper" -configuration Release build OBJROOT=build/ SYMROOT=build/ -parallelizeTargets :info:build Exit code: 65 :error:build org.macports.build for port XBMC returned: command execution failed :debug:build Error code: NONE :debug:build Backtrace: command execution failed while executing "$procedure $targetname" :info:build Warning: targets not executed for XBMC: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port XBMC for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_multimedia_XBMC/XBMC/main.log any idea? -- Ticket URL: <https://trac.macports.org/ticket/41063> MacPorts <http://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #41060: ragel @6.8_0 did not build cleanly on Mavericks
by MacPorts 29 Oct '13

29 Oct '13

#41060: ragel @6.8_0 did not build cleanly on Mavericks -------------------------+-------------------------------- Reporter: pjkim00@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: setiosflags | Port: ragel-6.8 -------------------------+-------------------------------- Trying to install textmate2 om Mavericks. Got hung up on install of ragel-6.8 (among other things). Went into ragel build directory and gave build command manually. Error was {{{ /usr/bin/clang++ -DHAVE_CONFIG_H -I. -I../aapl -I/opt/local/include -Wall -pipe -Os -arch x86_64 -MT ragel-rbxgoto.o -MD -MP -MF .deps/ragel- rbxgoto.Tpo -c -o ragel-rbxgoto.o `test -f 'rbxgoto.cpp' || echo './'`rbxgoto.cpp javacodegen.cpp:1187:20: error: use of undeclared identifier 'setiosflags'; did you mean 'std::setiosflags'? out << setw(5) << setiosflags(ios::right) << item; ^~~~~~~~~~~ std::setiosflags /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/c++/v1/iomanip:110:1: note: 'std::setiosflags' declared here setiosflags(ios_base::fmtflags __mask) ^ 1 error generated. make[2]: *** [ragel-javacodegen.o] Error 1 make[2]: *** Waiting for unfinished jobs.... mv -f .deps/ragel-rubyflat.Tpo .deps/ragel-rubyflat.Po mv -f .deps/ragel-rubyftable.Tpo .deps/ragel-rubyftable.Po mv -f .deps/ragel-rubyfflat.Tpo .deps/ragel-rubyfflat.Po mv -f .deps/ragel-rbxgoto.Tpo .deps/ragel-rbxgoto.Po make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_ragel/ragel/work/ragel-6.8/ragel' make[1]: *** [all] Error 2 make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_ragel/ragel/work/ragel-6.8/ragel' make: *** [all-recursive] Error 1 make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_ragel/ragel/work/ragel-6.8' }}} I changed line 1187 in javacodegen.cpp from setiosflags to std::setiosflags and then ragel built and installed without problems. Textmate2 worked as well-- sort of (will describe in more detail in Textmate2 ticket). -- Ticket URL: <https://trac.macports.org/ticket/41060> MacPorts <http://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #40665: upgrade conflict between subversion and apache2
by MacPorts 29 Oct '13

29 Oct '13

#40665: upgrade conflict between subversion and apache2 ----------------------------------+-------------------------------- Reporter: jerry@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: mod_dav_svn apr-util | Port: ----------------------------------+-------------------------------- I have run port selfupdate, and have current versions of subversion and apache2 installed. I get this error on apache2 startup: httpd: Syntax error on line 103 of /opt/local/apache2/conf/httpd.conf: Cannot load /opt/local/apache2/modules/mod_dav_svn.so into server: dlopen(/opt/local/apache2/modules/mod_dav_svn.so, 10): Library not loaded: /opt/local/lib/libaprutil-1.0.dylib\n Referenced from: /opt/local/apache2/modules/mod_dav_svn.so\n Reason: Incompatible library version: mod_dav_svn.so requires version 6.0.0 or later, but libaprutil-1.0.dylib provides version 5.0.0 Thank you for your yeoman work. -- Ticket URL: <https://trac.macports.org/ticket/40665> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #41056: Mavericks + gcc48 build breaks + fixes
by MacPorts 29 Oct '13

29 Oct '13

#41056: Mavericks + gcc48 build breaks + fixes ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: gcc48 ---------------------+-------------------------------- 1) After Mavericks upgrade /usr/include is gone *) FIX: ln -sf $(xcrun --show-sdk-path)/usr/include /usr/include 2) couldn't open "/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex": no such file or directory *) FIX: make Macports TCL (which is currently 8.6.1) a dependency + arrange for Macports TCL to be used instead of system TCL It appears TCL is no longer provided as a Framework in OSX. There is no Tcl.framework directory or tclIndex file on the disk anymore. -- Ticket URL: <https://trac.macports.org/ticket/41056> MacPorts <http://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #41001: py33-saga @0.9.12: source code needs to be converted to py3k
by MacPorts 29 Oct '13

29 Oct '13

#41001: py33-saga @0.9.12: source code needs to be converted to py3k -------------------------+-------------------------------- Reporter: drjesacco@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: py3k SAGA | Port: py33-saga -------------------------+-------------------------------- The saga-python code is written for python2.x, where x >= 5. In order to run under py3k, the code will need to be converted. -Joseph -- Ticket URL: <https://trac.macports.org/ticket/41001> MacPorts <http://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #40942: gaw requires gtk2 +x11
by MacPorts 29 Oct '13

29 Oct '13

#40942: gaw requires gtk2 +x11 --------------------+------------------------------ Reporter: snc@… | Owner: Torsten.Maehne@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: gaw --------------------+------------------------------ Gaw should use the active_variants PortGroup to ensure that gtk2 +x11 is installed. This is required for the gdk/gdkx.h file. -- Ticket URL: <https://trac.macports.org/ticket/40942> MacPorts <http://www.macports.org/> Ports system for OS X

1 2