September 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #39068: Adding +mariadb variant to py27-mysql port
by MacPorts 29 Jul '14

29 Jul '14

#39068: Adding +mariadb variant to py27-mysql port -----------------------+-------------------------------- Reporter: newberg@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: -----------------------+-------------------------------- mariadb @5.5.30 is meant to be a replacement for mysql55 and as such is supposed to work with mysql55 connectors. The py27-mysql @1.2.3 port has a +mysql55 variant but currently no +mariadb variant, meaning mysql55 must be installed along with mariadb for the py27-mysql port to properly install. (On my local system, I have installed the mariadb @5.5.30 port without mysql55 and have been able to compile the python mysql connector v1.2.3 and v1.2.4.b4 from source and run it in python 2.7 successfully.) Can a +mariadb variant be added to py27-mysql? -- Ticket URL: <https://trac.macports.org/ticket/39068> MacPorts <http://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #16113: OpenSceneGraph should use MacPorts curl, not Mac OS X's
by MacPorts 28 Jul '14

28 Jul '14

#16113: OpenSceneGraph should use MacPorts curl, not Mac OS X's -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | -------------------------------------+-------------------------------------- Parts of OpenSceneGraph link with /usr/lib/libcurl.3.dylib. This should be changed so that it depends on libcurl as provided by MacPorts, and a dependency on port:curl should be added. -- Ticket URL: <http://trac.macports.org/ticket/16113> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #37767: octave-general @1.3.2 fails to build
by MacPorts 28 Jul '14

28 Jul '14

#37767: octave-general @1.3.2 fails to build -----------------------------------+-------------------------------- Reporter: roberthuston@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: octave octave-general | Port: octave-general -----------------------------------+-------------------------------- I did a self update and discovered that my octave-signal port needed to be upgraded to 1.2.0_0. As part of the upgrade, macports pulled down octave- general @1.3.2. But the build failed, thus preventing me from upgrading my octave-signal port. It appears that the portfile's build script fails to create intermediate directories and thus cannot populate them with intermediate results. I have attached the output of the main.log that was dumped as part of the build. -- Ticket URL: <https://trac.macports.org/ticket/37767> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 12

[MacPorts] #33089: tmux variant for iterm2 support.
by MacPorts 28 Jul '14

28 Jul '14

#33089: tmux variant for iterm2 support. --------------------------------+------------------------------------------- Reporter: lhunath@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: sysutils/tmux --------------------------------+------------------------------------------- iTerm2 has a patched version of tmux that allows it to deeply integrate with iTerm2's features. It would be awesome if the tmux in macports had a variant that patched its tmux accordingly. -- Ticket URL: <https://trac.macports.org/ticket/33089> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #33979: py-celementtree: remove port
by MacPorts 28 Jul '14

28 Jul '14

#33979: py-celementtree: remove port ------------------------------+--------------------------------------------- Reporter: snc@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: python24 | Port: py-celementtree ------------------------------+--------------------------------------------- Once [ticket:33978 yum removes its dependencies], py-celementree should be removed. -- Ticket URL: <https://trac.macports.org/ticket/33979> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #31203: Updated ports for xfce 4.8
by MacPorts 28 Jul '14

28 Jul '14

#31203: Updated ports for xfce 4.8 -------------------------------+-------------------------------------------- Reporter: ak.ml@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: xfce, haspatch | Port: exo, garcon, gtk-xfce-engine, libxfce4ui, libxfce4util, libxfcegui4, orage, ristretto, Terminal, Thunar, xfce-utils, xfce4-appfinder, xfce4-panel, xfce4-session, xfce4-settings, xfconf, xfdesktop, xfwm4 -------------------------------+-------------------------------------------- I followed the build guideline [http://xfce.org/download/building#dependencies] Core components: * {{{exo}}} * {{{garcon}}} [new] * {{{gtk-xfce-engine}}} * {{{libxfce4ui}}} [new] * {{{libxfce4util}}} * {{{libxfcegui4}}} [deprecated] * {{{Thunar}}} * {{{xfce-utils}}} * {{{xfce4-appfinder}}} * {{{xfce4-panel}}} * {{{xfce4-session}}} * {{{xfce4-settings}}} * {{{xfconf}}} * {{{xfdesktop}}} * {{{xfwm4}}} Applications: * {{{orage}}} * {{{ristretto}}} * {{{Terminal}}} Attached: * Combined diff of modified Portfiles, I kept the indentation as it was in hope that it would make it easier to review. * New Portfiles for {{{garcon}}} and {{{libxfce4ui}}} * New patchfile: {{{xfce/libxfcegui4/files/patch-environ.diff}}} * Updated patchfile: {{{xfce/Terminal/files/patch-terminal- Makefile.in}}} I removed the following patchfiles: {{{ xfce/exo/files/exo-mmintrin.diff xfce/Thunar/files/patch-configure-snow.diff xfce/Thunar/files/patch-thunar-metafile.c xfce/xfce4-panel/files/config-launcher-icons.diff xfce/xfce4-panel/files/fix-xfce-bug-6110.diff xfce/xfce4-settings/files/patch-configure.diff xfce/xfce4-settings/files/patch-workspaces.c }}} Remarks: * I haven't updated {{{xfce}}} metaport but I can come up with something if you like. By the way I would refer to [wiki:Xfce] (which would need an update as well) for the setup instructions. I would use notes for the setup instructions. * If this gets committed, I'd appreciate if it was consistently indented, and modelines were added * You can add me as co-maintainer * {{{ristretto}}} doesn't work for me: I can't select any file for display -- Ticket URL: <https://trac.macports.org/ticket/31203> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 20

[MacPorts] #30243: bugzilla @2.22.3, Revision 2 is hugely out of date (from 2007)
by MacPorts 28 Jul '14

28 Jul '14

#30243: bugzilla @2.22.3, Revision 2 is hugely out of date (from 2007) --------------------------------------+------------------------------------- Reporter: Deil.Christoph@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: bugzilla --------------------------------------+------------------------------------- Please update to a current version. -- Ticket URL: <https://trac.macports.org/ticket/30243> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #39491: moreutils conflicts with parallel
by MacPorts 27 Jul '14

27 Jul '14

#39491: moreutils conflicts with parallel ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: moreutils ---------------------+-------------------------------- The "parallel" port installs GNU parallel. "moreutils" also installs a utility called "parallel", but it is incompatible with (and less flexible than) GNU parallel. I want to be able to install GNU parallel at the same time as the other utilities from moreutils (like "ts"). Here's how other OSs solve this conflict: * Fedora doesn't provide the "parallel" utility at all in the moreutils package (I, personally, would be happy with this choice). * Ubuntu (and maybe Debian as well?) disables the "parallel" utility from moreutils if you install GNU parallel when moreutils is already installed (I would also be happy with this; does macports allow doing this?). Another option would be to add a "-parallel" variant to the "moreutils" port, and mark it so that it doesn't conflict with the "parallel" port. Is it possible to mark only a particular variant of a port as conflicting? Prior tickets: Ticket #30972 asked for this conflict to be resolved, but instead the two ports were explicitly marked as conflicting. -- Ticket URL: <https://trac.macports.org/ticket/39491> MacPorts <http://www.macports.org/> Ports system for OS X

1 11

[MacPorts] #39504: moreutils: Install man pages by default
by MacPorts 27 Jul '14

27 Jul '14

#39504: moreutils: Install man pages by default ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: moreutils ---------------------+-------------------------------- Most other ports for command-line utilities install the corresponding man pages by default. I don't know why moreutils *has* a "doc" variant, but at least it should be enabled by default. -- Ticket URL: <https://trac.macports.org/ticket/39504> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #39081: error during docbook-xml-5.0 deactivation
by MacPorts 26 Jul '14

26 Jul '14

#39081: error during docbook-xml-5.0 deactivation --------------------+----------------------------- Reporter: ram@… | Owner: lockhart@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: docbook-xml-5.0 --------------------+----------------------------- When I uninstall `docbook-xml-5.0` the following message is displayed: {{{ ---> Deactivating docbook-xml-5.0 @5.0_1 Error: org.macports.deactivate for port docbook-xml-5.0 returned: command execution failed Please see the log file for port docbook-xml-5.0 for details: /opt/local/var/macports/logs /_opt_local_var_macports_registry_portfiles_docbook-xml-5.0_5.0_1/docbook- xml-5.0/main.log Warning: Failed to execute portfile from registry for docbook-xml-5.0 @5.0_1 ---> Uninstalling docbook-xml-5.0 @5.0_1 ---> Cleaning docbook-xml-5.0 }}} I can't obviously look at the log file as it's been removed during the clean process. What is causing this error? -- Ticket URL: <https://trac.macports.org/ticket/39081> MacPorts <http://www.macports.org/> Ports system for OS X

1 2