September 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #40560: docbook-xml-4.2 install failure
by MacPorts 26 Jul '14

26 Jul '14

#40560: docbook-xml-4.2 install failure -------------------------------+-------------------------------- Reporter: LelandSun@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: docbook, destroot | Port: docbook-xml-4.2 -------------------------------+-------------------------------- The installation of docbook-xml-4.2 reported an error that no destroot is found: Error: org.macports.install for port docbook-xml-4.2 returned: no destroot found at: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_textproc_docbook-xml/docbook- xml-4.2/work/destroot After I manually created such a folder at the expected location, a re- attempt of the install then succeeded. -- Ticket URL: <https://trac.macports.org/ticket/40560> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #37165: sgml-common: xmlcatmgr: failed to create `/opt/local/etc/xml/catalog': Permission denied
by MacPorts 26 Jul '14

26 Jul '14

#37165: sgml-common: xmlcatmgr: failed to create `/opt/local/etc/xml/catalog': Permission denied --------------------------+------------------------- Reporter: ryandesign@… | Owner: lockhart@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: sgml-common --------------------------+------------------------- Building sgml-common fails with the above error. /opt/local/etc/xml exists and is an empty directory. -- Ticket URL: <https://trac.macports.org/ticket/37165> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #36526: docbook-xml-5.0 deactivate errors
by MacPorts 26 Jul '14

26 Jul '14

#36526: docbook-xml-5.0 deactivate errors --------------------+----------------------------- Reporter: snc@… | Owner: lockhart@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.99 Keywords: | Port: docbook-xml-5.0 --------------------+----------------------------- When performing a `deactivate active`, docbook-xml-5.0 produced errors: {{{ :info:deactivate xmlcatmgr: no matching entry for = `/opt/local/share/xml/docbook/5.0/docbook.cat' of type `CATALOG' :info:deactivate Command failed: xmlcatmgr -s -c = /opt/local/etc/sgml/catalog remove CATALOG = /opt/local/share/xml/docbook/5.0/docbook.cat }}} -- Ticket URL: <https://trac.macports.org/ticket/36526> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #39330: nethack @3.4.3: Add descriptions for the variants
by MacPorts 25 Jul '14

25 Jul '14

#39330: nethack @3.4.3: Add descriptions for the variants -------------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: nethack -------------------------+-------------------------------- I'd like to reinstall my copy of nethack with some variants enabled this time, but I currently can't tell what the variants actually do because they don't have any descriptions. It'd be useful if they ''did'' actually have descriptions. -- Ticket URL: <https://trac.macports.org/ticket/39330> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #37328: nethack @3.4.3 +x11 Build failure
by MacPorts 25 Jul '14

25 Jul '14

#37328: nethack @3.4.3 +x11 Build failure ------------------------+-------------------------------- Reporter: nurblieh@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ------------------------+-------------------------------- nethack with the x11 variant selecetd fails to build, as the X11 headers can not be found. The bug is that the build.args-appends directive in the Portfile overrides the Makefile's CFLAGS that the x11 variant patches in. Removing the build.args-apend directive from the Portfile fixes the issue and is, largely unnecessary. (O vs O2 though...) This is from the x11 Makefile patch, {{{ -CFLAGS = -O -I../include +CFLAGS = -O -I../include -I/usr/X11R6/include }}} This is what exists in build.args-append, {{{ build.args-append CFLAGS="-O2 -I../include" }}} So the {{{-I/usr/X11R6/include}}} never gets respected. Attached is a working diff. Xcode 4.4; Mac OS X 10.8.2 -- Ticket URL: <https://trac.macports.org/ticket/37328> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #22167: nethack runs as root
by MacPorts 25 Jul '14

25 Jul '14

#22167: nethack runs as root ---------------------------------------+------------------------------------ Reporter: adam.gc.watkins@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: nethack ---------------------------------------+------------------------------------ Nethack runs as root, via setuid on '/opt/local/share/nethackdir/nethack'. It might sensible to setgid as 'games' or similar and set permissions appropriately elsewhere, but to run nethack as root by default is insane from a security perspective. -- Ticket URL: <http://trac.macports.org/ticket/22167> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #40099: yaz client update to last version
by MacPorts 25 Jul '14

25 Jul '14

#40099: yaz client update to last version --------------------------------+-------------------------------- Reporter: bertrand.zuchuat@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: --------------------------------+-------------------------------- It's possible to update yaz client to last version (4.2.63) http://www.indexdata.com/yaz Thank's -- Ticket URL: <https://trac.macports.org/ticket/40099> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #40347: py26-pyphant: use python PortGroup, merge multiple ports into subports, upgrade to version 1.0b2
by MacPorts 25 Jul '14

25 Jul '14

#40347: py26-pyphant: use python PortGroup, merge multiple ports into subports, upgrade to version 1.0b2 ---------------------+-------------------------- Reporter: mojca@… | Owner: rowue@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: py26-pyphant ---------------------+-------------------------- I tried to create a port in r110552 replacing the following ports: * py26-pyphant * py26-pyphant-fmf * py26-pyphant-imageprocessing * py26-pyphant-osc * py26-pyphant-statistics * py26-pyphant-tools by a single port with multiple subports for multiple python versions. For some reason I had to comment out {{{ OGLConstraint = wx._core._deprecated(Constraint, "The OGLConstraint name is deprecated, use `ogl.Constraint` instead.") }}} from {{{ ${frameworks_dir}/Python.framework/Versions/2.7/lib/python2.7/site- packages/sogl/_composit.py }}} from the `py-sogl` package, but it's not yet clear to me why. I'm still getting an error: {{{ /opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7 /site-packages/pyphant/wxgui2/wxPyphantApplication.py:70: wxPyDeprecationWarning: Using deprecated class PySimpleApp. wx.PySimpleApp.__init__(self) }}} but that seems like an upstream problem. The app itself starts, but I don't really know how to use it. When launching the bundled app, it starts bouncing and doesn't seem to run. I boldly tried to link against `py27-wxpython-3.0`. Given that the beta has been released recently, any remaining problems with 2.9 should really be fixed now since supporting 2.8 will be a nightmare. Please take a look and try to fix the remaining problem. I have no idea how to use the software. -- Ticket URL: <https://trac.macports.org/ticket/40347> MacPorts <http://www.macports.org/> Ports system for OS X

1 19

[MacPorts] #26801: Scons 1.2.0
by MacPorts 24 Jul '14

24 Jul '14

#26801: Scons 1.2.0 ----------------------------------------------------+----------------------- Reporter: arthur.teimourian@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: ----------------------------------------------------+----------------------- Hello, can you add Scons Version 1.2.0? I need it for a simulation program, which doesn't work with newer scons versions. thank you! arthur -- Ticket URL: <https://trac.macports.org/ticket/26801> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #36474: Perl 5.12 Config.pm gets wrong gcc
by MacPorts 24 Jul '14

24 Jul '14

#36474: Perl 5.12 Config.pm gets wrong gcc ----------------------------+-------------------------------- Reporter: macports.org@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: ----------------------------+-------------------------------- On a freshly formatted Macbook Pro, SnowLeopard, with Xcode 4.2, I attempted 'port install arb'. It died, and I applied the patch (gcc -O3 instead of gcc -O4) found here: http://bugs.arb-home.de/changeset/8675/trunk/Makefile I tried again, and it died in a new way: /usr/bin/gcc-4.2: No such file or directory It was building in the 'PERL2ARB' directory, and it got the CC variable from /opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/Config.pm It appears that the perl5.12 port needs to find /usr/bin/llvm-gcc-4.2 during installation. -- Ticket URL: <https://trac.macports.org/ticket/36474> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 16