June 2015 - macports-tickets - lists.macosforge.org

[MacPorts] #48012: Nettle 2.7.1 build failure
by MacPorts 12 Jul '15

12 Jul '15

#48012: Nettle 2.7.1 build failure -------------------------+-------------------------------- Reporter: m74z00219@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: nettle 2.7.1 -------------------------+-------------------------------- While it seems that Nettle has been abandoned, it seems that I need it. Unfortunately, I can't for the life of me get it to build. After running this > sudo port -t install nettle Macports reports that there are a number of broken links and that there are two broken ports. Seems that the broken ports are nettle itself and gnutls (which depends on nettle). Once "Configuring Nettle" begins, Macports delivers a warning: > The following file inside the MacPorts prefix not installed by a port was accessed: /opt/local/bin/gcc It also gives warnings about files being hidden from install, but I guess that's the point of tracemode. Then, finally, the error itself: > Error: org.macports.build for port nettle returned: command execution failed I tried combing through the error log, but, to be honest, it doesn't make much sense to me. I would appreciate any assistance. -- Ticket URL: <https://trac.macports.org/ticket/48012> MacPorts <https://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #48207: Yosemite MacPort intallation file does not work
by MacPorts 12 Jul '15

12 Jul '15

#48207: Yosemite MacPort intallation file does not work -----------------------+-------------------------------- Reporter: avalade@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: -----------------------+-------------------------------- I have re-imaged my laptop as per company policy and I am trying to install MacPort. It does not fail per say, but it does not seem to complete properly also. This is the information of my system: MAC OS: OS X Yosemite version 10.10.3 Xcode: Version 6.3.2 xcode-select version 2339 I also have agreed to the licence for Xcode. After the installation, the environment variable are not even set. If I open a new terminal, /opt/local/bin is not added to the path. -bash: port: command not found PATH=/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/usr/local/munki I am not sure if there's a log file for the installation that I could look at to see is something went wrong. -- Ticket URL: <https://trac.macports.org/ticket/48207> MacPorts <https://www.macports.org/> Ports system for OS X

1 10

[MacPorts] #48159: Gecode @4.4.0 portfile bugfix (qt variants)
by MacPorts 11 Jul '15

11 Jul '15

#48159: Gecode @4.4.0 portfile bugfix (qt variants) ---------------------------+-------------------------------- Reporter: l.digaspero@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: bugfix | Port: gecode ---------------------------+-------------------------------- The current version of the Portfile fixes a bug in the qt4 and qt5 variants of gecode, which did not compile because of the new staging of qt4-mac and qt5-mac ports. -- Ticket URL: <https://trac.macports.org/ticket/48159> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #47871: new port: zathura-plugin-pdf-mupdf @0.2.8
by MacPorts 11 Jul '15

11 Jul '15

#47871: new port: zathura-plugin-pdf-mupdf @0.2.8 -------------------------+-------------------------------------- Reporter: starkhalo@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: zathura-plugin-pdf-mupdf -------------------------+-------------------------------------- -- Ticket URL: <https://trac.macports.org/ticket/47871> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #47892: New port: sxiv
by MacPorts 11 Jul '15

11 Jul '15

#47892: New port: sxiv ------------------------+-------------------------------- Reporter: gnubeest@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: sxiv ------------------------+-------------------------------- sxiv is an alternative to feh and qiv. Its only dependencies besides xlib are imlib2, libexif and giflib. The primary goal for writing sxiv is to create an image viewer, which only has the most basic features required for fast image viewing (the ones I want). It has vi key bindings and works nicely with tiling window managers. Its code base should be kept small and clean to make it easy for you to dig into it and customize it for your needs. https://github.com/muennich/sxiv -- Ticket URL: <https://trac.macports.org/ticket/47892> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #46477: stm32flash 0.4
by MacPorts 11 Jul '15

11 Jul '15

#46477: stm32flash 0.4 ---------------------------------+-------------------------------- Reporter: ranauei@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: maintainer haspatch | Port: stm32flash ---------------------------------+-------------------------------- Open source flash program for the STM32 ARM processors using the ST serial bootloader over UART or I2C -- Ticket URL: <https://trac.macports.org/ticket/46477> MacPorts <https://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #47080: Fetching distfile failed: Failed to connect to geeklair.net port 3690: Connection refused
by MacPorts 11 Jul '15

11 Jul '15

#47080: Fetching distfile failed: Failed to connect to geeklair.net port 3690: Connection refused ----------------------------+--------------------- Reporter: ryandesign@… | Owner: dluke@… Type: defect | Status: new Priority: Normal | Milestone: Component: server/hosting | Version: Keywords: | Port: ----------------------------+--------------------- The buildbot builders cannot fetch FTP files, e.g.: {{{ ---> Attempting to fetch h3dutil-1.3.0.tar.gz from ftp://www.h3dapi.org/pub/releases/source/ % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0DEBUG: Fetching distfile failed: Failed to connect to geeklair.net port 3690: Connection refused }}} Daniel, is this an issue with your server or with Mac OS Forge's configuration of the buildbot builders? -- Ticket URL: <https://trac.macports.org/ticket/47080> MacPorts <https://www.macports.org/> Ports system for OS X

1 12

[MacPorts] #46447: p5-mail-mboxparser: failed test
by MacPorts 11 Jul '15

11 Jul '15

#46447: p5-mail-mboxparser: failed test ---------------------+-------------------------------- Reporter: mojca@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: p5-mail-mboxparser ---------------------+-------------------------------- One test for `p5-mail-mboxparser` fails: {{{ ---> Testing p5.20-mail-mboxparser PERL_DL_NONLAZY=1 /opt/local/bin/perl5.20 "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/0_pod.t ............... skipped: Test::Pod not installed t/0_pod_coverage.t ...... skipped: Test::Pod::Coverage not installed # Failed test 1 in t/10_qpnames.t at line 14 # t/10_qpnames.t line 14 is: skip(&Mail::MboxParser::Mail::HAVE_MIMEWORDS ? 0 : "Mime::Words not installed", t/10_qpnames.t .......... Failed 1/1 subtests t/1_mmb.t ............... ok ... }}} -- Ticket URL: <https://trac.macports.org/ticket/46447> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #47415: Segmentation fault with chemtool
by MacPorts 10 Jul '15

10 Jul '15

#47415: Segmentation fault with chemtool ---------------------------+-------------------------------- Reporter: ben.haefele@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: chemtool ---------------------------+-------------------------------- I get a segmentation fault 11 after starting the software. I figured out, that there is version 1.6.14 available on the developers side. Maybe the update solves my issue? {{{ ---> Computing dependencies for chemtool ---> Fetching archive for chemtool ---> Attempting to fetch chemtool-1.6.12_0.darwin_14.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/chemtool ---> Attempting to fetch chemtool-1.6.12_0.darwin_14.x86_64.tbz2 from http://lil.fr.packages.macports.org/chemtool ---> Attempting to fetch chemtool-1.6.12_0.darwin_14.x86_64.tbz2 from http://nue.de.packages.macports.org/macports/packages/chemtool ---> Fetching distfiles for chemtool ---> Verifying checksums for chemtool ---> Extracting chemtool ---> Configuring chemtool ---> Building chemtool ---> Staging chemtool into destroot ---> Installing chemtool @1.6.12_0 ---> Activating chemtool @1.6.12_0 ---> Cleaning chemtool ---> Updating database of binaries ---> Scanning binaries for linking errors ---> No broken files found. BennisMcBookPro:~ Benni$ chemtool Segmentation fault: 11 }}} -- Ticket URL: <https://trac.macports.org/ticket/47415> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #47554: openconnect compiled without UTUN support
by MacPorts 10 Jul '15

10 Jul '15

#47554: openconnect compiled without UTUN support ------------------------------+-------------------------------- Reporter: tte@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: openconnect utun | Port: openconnect ------------------------------+-------------------------------- Installed latest openconnect 7.05 from ports onto MacOS 10.8.2. Starting OpenConnect results in error messge: Failed to open tun device: Invalid argument .. but i did not want to install/use the 'tun' interface, but instead MacOS standard utun interface as supported by openconnect since 7.0 When i downloaded openconnect from http://www.infradead.org/openconnect/ and tried to compile myself, ./configure complained about IF_UTUN... not to compile, so the config file created did not include UTUN support. I did manually changed it and it compiled fine and worked fine. I do suspect that the port binary of openconnect might have had the same problem in compilation. I did not try to investigate why that compile problem exist (autoconfigure scripts are too complex). ALso note that the vpnc script that was installed by port openconnect seems to be quite outdated, aka: the package should be compiled with the latest downloaded from git. -- Ticket URL: <https://trac.macports.org/ticket/47554> MacPorts <https://www.macports.org/> Ports system for OS X

1 3