September 2015 - macports-tickets - lists.macosforge.org

[MacPorts] #47132: port submission: qarte
by MacPorts 06 Nov '15

06 Nov '15

#47132: port submission: qarte -------------------------+-------------------------------- Reporter: rjvbertin@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: qarte -------------------------+-------------------------------- qarte is a nice little interface that lists the videos currently available for replay (and download) on the Arte websites. It is based on PyKDE4 and uses rtmpdump for the actual downloading. -- Ticket URL: <https://trac.macports.org/ticket/47132> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #46019: Bash completion fails when in tmux or screen
by MacPorts 06 Nov '15

06 Nov '15

#46019: Bash completion fails when in tmux or screen -----------------------+-------------------------------- Reporter: audvare@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: -----------------------+-------------------------------- Using Terminal.app, bash-completion works without using tmux. I have `. /opt/local/etc/profile.d/bash_completion.sh` in `~/.bashrc`. Terminal.app shell is set to `/opt/local/bin/bash -l` and I have Bash installed from MacPorts. When I run `screen` or `tmux`, Bash completion stops working. Tried with no `~/.tmux.conf` and same effect. I do not have an rc for screen. Steps to reproduce: 1. `port install bash coreutils tmux bash-completion` 2. `. /opt/local/etc/profile.d/bash_completion.sh` 3. Be sure `ls --`<tab> works 4. `tmux` 5. Try `ls --`<tab> -- Ticket URL: <https://trac.macports.org/ticket/46019> MacPorts <https://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #48938: ffmpeg build failure on 10.6
by MacPorts 06 Nov '15

06 Nov '15

#48938: ffmpeg build failure on 10.6 -------------------------------------------------+------------------------- Reporter: chilli.namesake@… | Owner: macports- Type: defect | tickets@… Priority: Normal | Status: new Component: ports | Milestone: Keywords: ffmpeg, buildfailure, 10.6, | Version: 2.3.3 snowleopard | Port: ffmpeg -------------------------------------------------+------------------------- Last update, something isn't working. Snow still supported? There are over 500 lines of error messages, please see attached, thank you. -- Ticket URL: <https://trac.macports.org/ticket/48938> MacPorts <https://www.macports.org/> Ports system for OS X

1 15

[MacPorts] #48865: p5-term-editline @0.05
by MacPorts 04 Nov '15

04 Nov '15

#48865: p5-term-editline @0.05 ------------------------------+-------------------------------- Reporter: james.trammell@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: p5-term-editline ------------------------------+-------------------------------- New port submission for Term::EditLine 0.05 -- Ticket URL: <https://trac.macports.org/ticket/48865> MacPorts <https://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #47186: Update oce to 0.17
by MacPorts 04 Nov '15

04 Nov '15

#47186: Update oce to 0.17 ------------------------+-------------------------------- Reporter: ian.rees@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: oce ------------------------+-------------------------------- All I've updated here from the original oce 0.15 Portfile is the version of OCE and the hashes. Have installed and linked with FreeCAD, and run unit tests, all seems to work fine. Thanks! -Ian- -- Ticket URL: <https://trac.macports.org/ticket/47186> MacPorts <https://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #48796: okular and kspaceduel both crash after successful build/install
by MacPorts 04 Nov '15

04 Nov '15

#48796: okular and kspaceduel both crash after successful build/install ------------------------+-------------------------------- Reporter: accounts@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: ------------------------+-------------------------------- This is OS X 10.10.2 with a recent (last 1-2 days) install of MacPorts 2.3.3 I installed okular @4.14.3_1 (kde, kde4) with the default variants. I first tried installing with the +docs variant (port install okular +docs), but the build failed here, so I did sudo port clean okular and tried again, this time running sudo port install okular which reported success. However, the executable seems to crash immediately after I launch it. I have the following log entries in my console. The Gestalt selector error seems like it might be important. {{{ 9/7/15 7:20:38.203 AM Console[38093]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable 9/7/15 7:20:49.728 AM okular[38096]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.2 instead of 10.10.2. Use NSProcessInfo's operatingSystemVersion property to get correct system version number. Call location: 9/7/15 7:20:49.732 AM okular[38096]: 0 CarbonCore 0x00007fff91171d9b ___Gestalt_SystemVersion_block_invoke + 113 9/7/15 7:20:49.732 AM okular[38096]: 1 libdispatch.dylib 0x00007fff94f6bc13 _dispatch_client_callout +8 9/7/15 7:20:49.732 AM okular[38096]: 2 libdispatch.dylib 0x00007fff94f6bb26 dispatch_once_f + 117 9/7/15 7:20:49.732 AM okular[38096]: 3 CarbonCore 0x00007fff9111a3ca _Gestalt_SystemVersion + 987 9/7/15 7:20:49.733 AM okular[38096]: 4 CarbonCore 0x00007fff91119fb7 Gestalt + 144 9/7/15 7:20:49.733 AM okular[38096]: 5 QtCore 0x00000001100f31aa _ZN16QSettingsPrivate6createEN9QSettings6FormatENS0_5ScopeERK7QStringS5_ + 74 9/7/15 7:20:49.733 AM okular[38096]: 6 QtCore 0x00000001100d4202 _ZN9QSettingsC1ERK7QStringS2_P7QObject + 34 9/7/15 7:20:51.260 AM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.oneshot.0x10000027.okular[38096]) Service exited with abnormal code: 253 }}} Reproducible: Always Steps to Reproduce: 1. sudo port install okular 2. launch okular 3. okular crashes Actual Results: Bouncy okular icon which then stops bouncing. Expected Results: Okular launches successfully. In case it helps, I'll add that after installing kspaceduel, I get the same behavior with the latter application too. As for https://guide.macports.org/#project.tickets "Is the problem an application error and not related to compiling and installing? In general, application bugs should be reported to the developers of the app (“upstream”), not MacPorts. An application bug that affects a large number of MacPorts users might merit a MacPorts bug for informational purposes only, but this should be done sparingly."... Please see https://bugs.kde.org/show_bug.cgi?id=352379 -- Ticket URL: <https://trac.macports.org/ticket/48796> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #45910: Okular makes broken screen when scrolling
by MacPorts 03 Nov '15

03 Nov '15

#45910: Okular makes broken screen when scrolling --------------------------+-------------------------------- Reporter: lightoml@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.2 Keywords: okular 0.6.4 | Port: --------------------------+-------------------------------- Okular 0.6.4 in KDE4.13.3 makes broken screen when scrolling slowly. I attached the screenshot for broken screen. Could you fix the problem? Thanks! -- Ticket URL: <https://trac.macports.org/ticket/45910> MacPorts <https://www.macports.org/> Ports system for OS X

1 21

[MacPorts] #47612: couchdb@1.6.1 missing erlang (erl_driver.h) as dependency?
by MacPorts 02 Nov '15

02 Nov '15

#47612: couchdb(a)1.6.1 missing erlang (erl_driver.h) as dependency? ---------------------+-------------------------------- Reporter: mtb19@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: couchdb(a)1.6.1 ---------------------+-------------------------------- This is a user install attempt. From `main.log`: {{{ :info:configure checking Erlang version compatibility... -n detected Erlang version: 6.4.0... :info:configure compatible :info:configure checking for erlc... /Users/xyz/.site/bin/erlc :info:configure checking erl_driver.h usability... no :info:configure checking erl_driver.h presence... no :info:configure checking for erl_driver.h... no :info:configure configure: error: Could not find the `erl_driver.h' header. :info:configure :info:configure Are the Erlang headers installed? :info:configure :info:configure Use the `--with-erlang' option to specify the Erlang include directory. :info:configure Command failed: cd "/Users/xyz/.site/var/macports/build/_Users_xyz_.site_var_macports_sources_rsync.macports.org_release_tarballs_ports_databases_couchdb/couchdb/work /apache-couchdb-1.6.1" && ./configure --prefix=/Users/xyz/.site --enable- js-trunk :info:configure Exit code: 1 }}} -- Ticket URL: <https://trac.macports.org/ticket/47612> MacPorts <https://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #47414: gwyddion: remove icu dependency
by MacPorts 02 Nov '15

02 Nov '15

#47414: gwyddion: remove icu dependency --------------------------+---------------------- Reporter: ryandesign@… | Owner: rowue@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.99 Keywords: | Port: gwyddion --------------------------+---------------------- gwyddion declares a library dependency on port:icu but I can find no evidence that it's actually used. Maybe the dependency should be removed. -- Ticket URL: <https://trac.macports.org/ticket/47414> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #46916: Update py-cog to 2.4
by MacPorts 01 Nov '15

01 Nov '15

#46916: Update py-cog to 2.4 ----------------------+-------------------------------- Reporter: sean@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: haspatch | Port: py-cog ----------------------+-------------------------------- This patch updates the py-cog Portfile to [[https://pypi.python.org/pypi/cogapp|version 2.4]] -- Ticket URL: <https://trac.macports.org/ticket/46916> MacPorts <https://www.macports.org/> Ports system for OS X

1 2