November 2007 - macports-users - lists.macosforge.org

Re: PHP5 Installed Extensions?
by Ryan Schmidt 28 Nov '07

28 Nov '07

On Nov 28, 2007, at 03:48, Conrad Taylor wrote: > On Nov 28, 2007 1:22 AM, Ryan Schmidt wrote: > >> On Nov 28, 2007, at 03:16, Conrad Taylor wrote: >> >> > Hi, I'm wanting to use the following extensions on Mac OS X: >> > >> > php_pdo.so >> > php_pdo_mysql.so >> >> If you select the +mysql5 (or +mysql4 or +mysql3) variant when you >> install php5, it is built with support for MySQL 5 (or 4 or 3), >> including the PDO functions. No need for any separate extension file. > > Hi, I built it using the following > > +apache2 +darwin_8 +macosx +mysql5 Ok. And are you saying the PDO MySQL functions aren't working for you in this setup? If so, could you provide me a short example which should work but which does not? Send a PHP script (and SQL dump which creates the database, if one is required for the example) and I'll look into it.

1 0

Re: PHP5 Installed Extensions?
by Ryan Schmidt 28 Nov '07

28 Nov '07

On Nov 28, 2007, at 03:16, Conrad Taylor wrote: > On Nov 27, 2007 10:31 PM, Jyrki Wahlstedt wrote: > >> On 27.11.2007, at 19.42, Conrad Taylor wrote: >> >> > Hi, where does Mac Ports stored the installed php5 extensions? >> Also, >> > how does one enable them? >> > >> > Thanks in advance, >> > >> > -Conrad >> >> Hi, >> you mean like: >> php-config --extension-dir >> >> that for me gives '/opt/local/lib/php/extensions/no-debug-non- >> zts-20060613'? >> >> Enabling them happens in php.ini-file (there are two example ones in >> the package, not in use by default), look for a section for >> extensions. >> >> PS cc'd this message to macports-users list (in case someone else has >> the same question). > > Hi, I'm wanting to use the following extensions on Mac OS X: > > php_pdo.so > php_pdo_mysql.so If you select the +mysql5 (or +mysql4 or +mysql3) variant when you install php5, it is built with support for MySQL 5 (or 4 or 3), including the PDO functions. No need for any separate extension file.

1 0

Freeradius 1.1.7 installing problem under Leopard
by Jürgen Brändle 28 Nov '07

28 Nov '07

Hi there, after having no luck installing freeradius 1.1.6 und Tiger I now tried to port install freeradius 1.1.7 on Leopard. But also had no luck :-( Below you can see the log of the second install run. As you can see most of the "makings" worked fine. Only a few stopped with: >> *** Warning: Linking the shared library rlm_perl.la against the >> *** static library /System/Library/Perl/5.8.8/darwin-thread- >> multi-2level/auto/DynaLoader/DynaLoader.a is not portable! First: Anyone out there got it to work and may help me Second: I don't think I need the rlm.perl stuff. SO is it possible to just ignore it (comment it out somewhere) Thanks in advance for any help. Juergen > jbmbp:~ jb$ sudo port -dv install freeradius > Password: > DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sys… > DEBUG: Changing to port directory: /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/sysutils/freeradius > DEBUG: Requested variant darwin is not provided by port freeradius. > DEBUG: Requested variant i386 is not provided by port freeradius. > DEBUG: Requested variant macosx is not provided by port freeradius. > DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/dev… > DEBUG: Changing to port directory: /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/devel/openssl > DEBUG: Requested variant i386 is not provided by port openssl. > DEBUG: Requested variant macosx is not provided by port openssl. > DEBUG: Executing variant darwin provides darwin > DEBUG: Searching for dependency: openssl > DEBUG: Found Dependency: receipt exists for openssl > DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/dat… > DEBUG: Changing to port directory: /opt/local/var/macports/sources/ > rsync.macports.org/release/ports/databases/gdbm > DEBUG: Requested variant darwin is not provided by port gdbm. > DEBUG: Requested variant i386 is not provided by port gdbm. > DEBUG: Requested variant macosx is not provided by port gdbm. > DEBUG: Searching for dependency: gdbm > DEBUG: Found Dependency: receipt exists for gdbm > DEBUG: Skipping completed org.macports.main (freeradius) > DEBUG: Skipping completed org.macports.fetch (freeradius) > DEBUG: Skipping completed org.macports.checksum (freeradius) > DEBUG: Skipping completed org.macports.extract (freeradius) > DEBUG: Skipping completed org.macports.patch (freeradius) > DEBUG: Skipping completed org.macports.configure (freeradius) > ---> Building freeradius with target all > DEBUG: Executing org.macports.build (freeradius) > DEBUG: Environment: > DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7" && make all' > Making all in src... > Making all in include... > make[4]: Nothing to be done for `all'. > Making all in lib... > make[4]: Nothing to be done for `all'. > Making all in modules... > Making all in rlm_acct_unique... > Making all in rlm_always... > Making all in rlm_attr_filter... > Making all in rlm_attr_rewrite... > Making all in rlm_chap... > Making all in rlm_counter... > Making all in rlm_dbm... > Making all in rlm_detail... > Making all in rlm_digest... > Making all in rlm_eap... > Making all in libeap... > make[7]: Nothing to be done for `all'. > Making all in types... > /usr/bin/make WHAT_TO_MAKE=all common > Making all in rlm_eap_gtc... > Making all in rlm_eap_leap... > Making all in rlm_eap_md5... > Making all in rlm_eap_mschapv2... > Making all in rlm_eap_peap... > Making all in rlm_eap_sim... > Making all in rlm_eap_tls... > Making all in rlm_eap_ttls... > Making all in libeap... > make[8]: Nothing to be done for `all'. > Making all in types... > /usr/bin/make WHAT_TO_MAKE=all common > Making all in rlm_eap_gtc... > Making all in rlm_eap_leap... > Making all in rlm_eap_md5... > Making all in rlm_eap_mschapv2... > Making all in rlm_eap_peap... > Making all in rlm_eap_sim... > Making all in rlm_eap_tls... > Making all in rlm_eap_ttls... > Making all in rlm_exec... > Making all in rlm_expr... > Making all in rlm_fastusers... > Making all in rlm_files... > Making all in rlm_ippool... > Making all in rlm_krb5... > make[6]: Nothing to be done for `all'. > Making all in rlm_ldap... > Making all in rlm_mschap... > Making all in rlm_ns_mta_md5... > Making all in rlm_otp... > Making all in rlm_pam... > Making all in rlm_pap... > Making all in rlm_passwd... > Making all in rlm_perl... > /opt/local/var/macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7/libtool --mode=link gcc -release 1.1.7 \ > -module -export-dynamic -L/opt/local/lib -o > rlm_perl.la \ > -rpath /opt/local/lib rlm_perl.lo rlm_perl.c /opt/local/var/ > macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7/src/lib/libradius.la \ > `perl -MExtUtils::Embed -e ldopts` -lresolv -lpthread > > *** Warning: Linking the shared library rlm_perl.la against the > *** static library /System/Library/Perl/5.8.8/darwin-thread- > multi-2level/auto/DynaLoader/DynaLoader.a is not portable! > rm -fr .libs/rlm_perl-1.1.7.so .libs/rlm_perl.a .libs/rlm_perl.so > gcc ${wl}-flat_namespace ${wl}-undefined ${wl}suppress -o .libs/ > rlm_perl-1.1.7.so -bundle .libs/rlm_perl.o -L/opt/local/lib /opt/ > local/var/macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7/src/lib/.libs/libradius.dylib -L/usr/local/lib / > System/Library/Perl/5.8.8/darwin-thread-multi-2level/auto/DynaLoader/ > DynaLoader.a -L/System/Library/Perl/5.8.8/darwin-thread-multi-2level/ > CORE -lperl -ldl -lm -lutil -lc -lresolv -lpthread -arch i386 -arch > ppc > ld: warning in /opt/local/var/macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7/src/lib/.libs/libradius.dylib, file is not of > required architecture > (cd .libs && rm -f rlm_perl.so && ln -s rlm_perl-1.1.7.so rlm_perl.so) > ar cru .libs/rlm_perl.a /System/Library/Perl/5.8.8/darwin-thread- > multi-2level/auto/DynaLoader/DynaLoader.a rlm_perl.o /System/ > Library/Perl/5.8.8/darwin-thread-multi-2level/auto/DynaLoader/ > DynaLoader.a > ranlib: archive member: .libs/rlm_perl.a(DynaLoader.a) fat file for > cputype (18) cpusubtype (0) is not an object file (bad magic number) > ar: internal ranlib command failed > make[6]: *** [rlm_perl.la] Error 1 > make[5]: *** [common] Error 2 > make[4]: *** [all] Error 2 > make[3]: *** [common] Error 2 > make[2]: *** [all] Error 2 > make[1]: *** [common] Error 2 > make: *** [all] Error 2 > Error: Target org.macports.build returned: shell command " cd "/opt/ > local/var/macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7" && make all " returned error 2 > Command output: make[6]: Nothing to be done for `all'. > Making all in rlm_ldap... > Making all in rlm_mschap... > Making all in rlm_ns_mta_md5... > Making all in rlm_otp... > Making all in rlm_pam... > Making all in rlm_pap... > Making all in rlm_passwd... > Making all in rlm_perl... > /opt/local/var/macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7/libtool --mode=link gcc -release 1.1.7 \ > -module -export-dynamic -L/opt/local/lib -o > rlm_perl.la \ > -rpath /opt/local/lib rlm_perl.lo rlm_perl.c /opt/local/var/ > macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7/src/lib/libradius.la \ > `perl -MExtUtils::Embed -e ldopts` -lresolv -lpthread > > *** Warning: Linking the shared library rlm_perl.la against the > *** static library /System/Library/Perl/5.8.8/darwin-thread- > multi-2level/auto/DynaLoader/DynaLoader.a is not portable! > rm -fr .libs/rlm_perl-1.1.7.so .libs/rlm_perl.a .libs/rlm_perl.so > gcc ${wl}-flat_namespace ${wl}-undefined ${wl}suppress -o .libs/ > rlm_perl-1.1.7.so -bundle .libs/rlm_perl.o -L/opt/local/lib /opt/ > local/var/macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7/src/lib/.libs/libradius.dylib -L/usr/local/lib / > System/Library/Perl/5.8.8/darwin-thread-multi-2level/auto/DynaLoader/ > DynaLoader.a -L/System/Library/Perl/5.8.8/darwin-thread-multi-2level/ > CORE -lperl -ldl -lm -lutil -lc -lresolv -lpthread -arch i386 -arch > ppc > ld: warning in /opt/local/var/macports/build/ > _opt_local_var_macports_sources_rsync > .macports.org_release_ports_sysutils_freeradius/work/ > freeradius-1.1.7/src/lib/.libs/libradius.dylib, file is not of > required architecture > (cd .libs && rm -f rlm_perl.so && ln -s rlm_perl-1.1.7.so rlm_perl.so) > ar cru .libs/rlm_perl.a /System/Library/Perl/5.8.8/darwin-thread- > multi-2level/auto/DynaLoader/DynaLoader.a rlm_perl.o /System/ > Library/Perl/5.8.8/darwin-thread-multi-2level/auto/DynaLoader/ > DynaLoader.a > ranlib: archive member: .libs/rlm_perl.a(DynaLoader.a) fat file for > cputype (18) cpusubtype (0) is not an object file (bad magic number) > ar: internal ranlib command failed > make[6]: *** [rlm_perl.la] Error 1 > make[5]: *** [common] Error 2 > make[4]: *** [all] Error 2 > make[3]: *** [common] Error 2 > make[2]: *** [all] Error 2 > make[1]: *** [common] Error 2 > make: *** [all] Error 2 > > Warning: the following items did not execute (for freeradius): > org.macports.activate org.macports.build org.macports.destroot > org.macports.install > Error: Status 1 encountered during processing. > jbmbp:~ jb$

1 0

Re: Your gzip pipe problem (found on MacPorts mailing list)
by Jesse Ohlsson 28 Nov '07

28 Nov '07

Ryan, I was hesitant to move the /usr/local directory, so haven't tried it yet. Mark, you are right, I have no tar utility installed any more for some reason... Any idea where it is supposed to go? I'm thinking / usr/bin... Thanks, I'll try to replace it this evening. Jesse On Nov 27, 2007, at 11:39 PM, Mark Machado wrote: > Jesse- > > I came across your message on the MacPort mailing > list about your 'gzip pipe' problem when I was > researching a similar problem I was encountering. > That thread pointed me at a solution to my problem > that I wanted to pass on in case yours was caused by > the same thing. What had happened to me is somehow > the 'tar' utility was removed from my system (I think > it might have happened when I updated XTools). Try > running 'tar' from an X11 terminal: if it is not > accessible, you probably have the same problem I did. > > To fix, I replaced the tar file (there was a backup > copy in /Previous System/usr/bin - you may have to > find it somewhere else), reran the XTools installer, > and everything was fine. > > Hope this helps, > > Mark > > > > ____________________________________________________________________________________ > Never miss a thing. Make Yahoo your home page. > http://www.yahoo.com/r/hs

1 0

Re: PHP5 Installed Extensions?
by Jyrki Wahlstedt 28 Nov '07

28 Nov '07

On 27.11.2007, at 19.42, Conrad Taylor wrote: > Hi, where does Mac Ports stored the installed php5 extensions? Also, > how does one enable them? > > Thanks in advance, > > -Conrad Hi, you mean like: php-config --extension-dir that for me gives '/opt/local/lib/php/extensions/no-debug-non- zts-20060613'? Enabling them happens in php.ini-file (there are two example ones in the package, not in use by default), look for a section for extensions. PS cc'd this message to macports-users list (in case someone else has the same question). ! ! Jyrki Wahlstedt ! http://www.wahlstedt.fi/jyrki/ ! ! Our life is no dream; but it ought to become one and perhaps will. ! PGP key ID: 0x139CC386 fingerprint: F355 B46F 026C B8C1 89C0 A780 6366 EFD9 139C C386

1 0

Can't install Gimp on 10.5.1
by chagrins 27 Nov '07

27 Nov '07

I've been able to install a few packages (unrar and a couple of others), but I can't get gimp to install. I have Xcode and X11 installed. sudo port -v install gimp After entering that, I get asked for my password, which I enter. Then, I hear my computer working for a few seconds, but there's no feedback at all, ever (I've left it overnight a couple of times). tclsh processor usage is high the whole time. I stop it using Control-C. I haven't seen this problem on the list archives (most people seem to get at least an error message). Any advice?

5 8

problem with libraries path
by Rémi Thébault 27 Nov '07

27 Nov '07

Hi I have some problems with pathes and env. variables. It seems my system get confused and doesn't want in some situations to find libraries or headers elsewhere than /opt/local. here is my profile file: $ cat ~/.profile # # Your previous .profile (if any) is saved as .profile.mpsaved # Setting the path for MacPorts. export PATH=/usr/local/bin:/usr/local/sbin:/opt/local/bin:/opt/local/ sbin:/sw/bin:/sw/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11/bin export C_INCLUDE_PATH=/usr/local/include:/opt/local/include:/sw/ include:/usr/include export LIBRARY_PATH=/usr/local/lib:/opt/local/lib:/sw/lib:/usr/lib I have for instance installed liblrdf in /usr/local and when I want to build Ardour from source (it uses scons instead of ./configure && make) : ardour-2.1 $ scons AUDIOUNITS=1 COREAUDIO=1 GTKOSX=1 FFT_ANALYSIS=1 SURFACES=1 scons: Reading SConscript files ... Checking for pkg-config version >= 0.8.0... yes Checking for gthread-2.0... yes Checking for lrdf... no lrdf >= 0.4.0 not found. You do not have the necessary dependencies required to build ardour Please consult http://ardour.org/building for more information a workaround is to install all dependencies in /opt/local, but I don't like it, and some of them (like JackOSX) cannot be installed elsewhere than /usr/local. I would like to find a system wide way to make any building or configure script look first in /usr/local then in /opt/local to find whatever is needed (libraries or headers). I assue this behaviour should be automatic but it's not, and I've never had this kind of problem on linux. May be this a problem specific to scons ? I've tried to specify CFLAGS : $ CFLAGS="-I/usr/local/include -I/opt/ local/include -I/usr/include" scons but the same error occurs. Rémi Intel Macbook, Leopard 10.5.1

2 2

MPlayer fails on asm
by David Liontooth 27 Nov '07

27 Nov '07

MPlayer fails to compile on macintel 10.5.1 with the message i386/dsputil_mmx.c:634: error: can't find a register in class 'GENERAL_REGS' while reloading 'asm' Is this a known problem? workaround? Dave opt.c: In function 'opt_list': opt.c:324: warning: passing argument 3 of 'opt_list' discards qualifiers from pointer target type cc -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -I. -I./libavutil -I./libavcodec -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I.. -I.. -I../libavutil -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -c -o bitstream_filter.o bitstream_filter.c cc -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -I. -I./libavutil -I./libavcodec -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I.. -I.. -I../libavutil -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -c -o audioconvert.o audioconvert.c cc -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -I. -I./libavutil -I./libavcodec -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I.. -I.. -I../libavutil -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -c -o imgresample.o imgresample.c cc -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -I. -I./libavutil -I./libavcodec -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I.. -I.. -I../libavutil -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -c -o i386/fdct_mmx.o i386/fdct_mmx.c cc -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -I. -I./libavutil -I./libavcodec -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I.. -I.. -I../libavutil -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -c -o i386/cputest.o i386/cputest.c cc -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -I. -I./libavutil -I./libavcodec -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I.. -I.. -I../libavutil -Wdeclaration-after-statement -fno-PIC -O4 -march=pentium-m -mtune=pentium-m -pipe -ffast-math -fomit-frame-pointer -mdynamic-no-pic -falign-loops=16 -DSYS_DARWIN -DCONFIG_DARWIN -shared-libgcc -arch i386 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/opt/local/include/lzo -I/opt/local/include -I/usr/X11/include -c -o i386/dsputil_mmx.o i386/dsputil_mmx.c i386/h264dsp_mmx.c: In function 'h264_h_loop_filter_luma_mmx2': i386/dsputil_mmx.c:634: error: can't find a register in class 'GENERAL_REGS' while reloading 'asm' i386/dsputil_mmx.c:634: error: can't find a register in class 'GENERAL_REGS' while reloading 'asm' make[1]: *** [i386/dsputil_mmx.o] Error 1 make: *** [libavcodec/libavcodec.a] Error 2 Error: The following dependencies failed to build: MPlayer

2 1

mod_fastcgi version 2.4.2 error, new 2.4.6
by John Lauck 27 Nov '07

27 Nov '07

I tried to install mod_fastcgi this morning and found an error in the macports repository. It looks like macports is looking for mod_fastcgi-2.4.2.tar.gz and the new mod_fastcgi-2.4.6.tar.gz is now in its place. The older 2.4.2 version is now in the sub directory old/. ---> Fetching mod_fastcgi ---> Attempting to fetch mod_fastcgi-2.4.2.tar.gz from http://www.fastcgi.com//dist/ ---> Attempting to fetch mod_fastcgi-2.4.2.tar.gz from http://svn.macports.org/repository/macports/distfiles/mod_fastcgi ---> Attempting to fetch mod_fastcgi-2.4.2.tar.gz from http://svn.macports.org/repository/macports/distfiles/general/ ---> Attempting to fetch mod_fastcgi-2.4.2.tar.gz from http://svn.macports.org/repository/macports/downloads/mod_fastcgi Error: Target org.macports.fetch returned: fetch failed Error: Status 1 encountered during processing. http://www.fastcgi.com//dist/ shows an index of files: [ ] CGI.pm-2.7803.tar.gz 05-Nov-2001 15:04 129k [ ] FCGI.pm-0.64-win32-x86.zip 05-Nov-2001 22:05 24k [ ] fcgi-2.4.0.tar.gz 19-Jan-2003 12:23 458k [ ] fcgi-2.4.1-SNAP-0311112127.tar.gz 11-Nov-2003 21:32 459k [ ] mod_fastcgi-2.4.6-AP22.dll 13-Nov-2007 07:38 220k [ ] mod_fastcgi-2.4.6.tar.gz 13-Nov-2007 07:28 98k

2 1

MacQuantian?
by Alexy Khrabrov 27 Nov '07

27 Nov '07

I've recently discovered a great Linux distro, which strives to package all quantitative open source applications: the Quantian, by the Debian pro and well-known quant Dirk Eddelbuettel: http://dirk.eddelbuettel.com/quantian.html I wonder what would it take to mirror it as a blob of MacPorts? Basically, all these apps have ports -- and a large subset certainly does. So one can simply create a port "quantian" which would simply depend on all those ports already available and build them --correct? Cheers, Alexy

2 1