December 2007 - macports-users - lists.macosforge.org

Re: Kismet on OSX 10.5.1 Leopard
by caliel 02 Jan '08

02 Jan '08

I am away from access to alternate hardware, please let me know what you find. I have not found a resolution as yet. I saw you also responded to a post at the Kismet site, perhaps one of the 3 of us will find a solution. --C trolley wrote: > > > caliel wrote: >> >> >> Kismet fails as follows. >> >> Yliakum:~ caliel$ sudo kismet >> Password: >> Launching kismet_server: /opt/local/bin/kismet_server >> Will drop privs to caliel (502) gid 20 >> No specific sources given to be enabled, all will be enabled. >> Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, >> madwifi-ng) >> Enabling channel hopping. >> Enabling channel splitting. >> INFO: wlt1 looks like a Broadcom card running under Darwin. >> Source 0 (airport_extreme): Enabling monitor mode for darwin source >> interface en1 channel 6... >> î|07-11-19 14:00:48.175 kismet_server[3092:10b] † >> INFO: en1 looks like a Broadcom card running under Darwin and >> already >> has monitor mode enabled in the kernel. >> Source 0 (airport_extreme): Opening darwin source interface wlt1... >> FATAL: BIOCSETIF: wlt1: Device not configured >> Done. >> >> > > I'm getting the same error on a Powerbook G4. Did you figure anything out? > I'm going to try it with a Ralink USB dongle and see if I have any more > luck. > -- View this message in context: http://www.nabble.com/Kismet-on-OSX-10.5.1-Leopard-tf4838737.html#a13904713 Sent from the MacPorts - Users mailing list archive at Nabble.com.

2 5

So who owns the macports Wordpress/TRAC system?
by paul beard 01 Jan '08

01 Jan '08

The reason I ask is that I would like to change my password to something more memorable, since it never makes into my keychain. And I can't touch my profile due to some permissions issues. But more importantly, the installed version is out of date: a lot of vulnerabilities have been addressed over the past few months, and it would be good to incorporate those changes. -- Paul Beard / www.paulbeard.org/ <paulbeard@gmail.com/paulbeard@mac.com>

4 4

sudo port install gnutar
by Charlse Darwin 31 Dec '07

31 Dec '07

$ sudo port install gnutar ---> Configuring gnutar Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync.macports.org_release_ports_archive rs_gnutar/work/tar-1.19" && ./configure --prefix=/opt/local --program- prefix=gnu --infodir=/opt/local/share/info " returned error 1 Command output: checking for ftruncate... yes checking for gettimeofday... yes checking for nanotime... no checking for alarm... yes checking for lchmod... no checking for fdopendir... no checking for mbsinit... yes checking for mbrtowc... yes checking for wcrtomb... yes checking for wcscoll... yes checking for setenv... yes checking for sleep... yes checking for strerror... yes checking for lstat... yes checking for pipe... yes checking for futimes... yes checking for futimesat... no checking for vasnprintf... no checking for iswcntrl... yes checking for wcwidth... yes checking for mkfifo... yes checking for setlocale... yes checking for d_ino member in directory struct... yes checking whether system is Windows or MSDOS... no checking for long file names... yes checking whether canonicalize_file_name is declared... no checking for unistd.h... (cached) yes checking for working chown... yes checking whether chown(2) dereferences symlinks... yes configure: error: cannot run /bin/sh build-aux/config.sub Error: Status 1 encountered during processing. $

2 1

Leopard status
by Rob MacLeod 31 Dec '07

31 Dec '07

Hi, I have upgraded to Leopard and many builds seems to fail. I cannot get a working emacs in a new install, xdvi-xaw.bin failed in an attempt to update an existing MacPorts tree, and there seems to be some consistent havoc about Leopard. I also was not able to usefully search the archived email of this list--is there something I am missing? Thanks, Rob

4 9

openssh +hpn variant builds fail
by David L Ballenger 31 Dec '07

31 Dec '07

Hi, Trying to install openssh with the hpn variant fails trying to apply patches. If I don't specify +hpn it builds and installs fine. This is with MacPorts 1.60 on Leopard (10.5.1) on a couple of different Intel boxes. At first I thought that it might be related to the following Trac ticket: <http://trac.macports.org/projects/macports/ticket/13091> which contains a patch to update the Portifle to use a new HPN patch. I successfully applied to that patch to a local copy of the Portfile but still got the same errors. I then commented out the "patch.pre_args -p1" command/option in the hpn variant. That allowed some patches specified by patch-pwdup.diff to be applied but not those specified in of the /openssh-4.7p1-hpn12v18.diff.gz patch file or the /openssh-4.7p1-hpn12v19.diff.gz patch file. Finally I went back to the Portfile and instead of commenting out "patch.pre_args -p1" command/option in the hpn variant, I removed the "-p1". This seems to be working, all patches apply and the installed ssh with hpn support seems to be working. Was there a change to patch in Leopard? Last time I did an OpenSSH install on Tiger, back in Oct it ran fine. Haven't had a chance to try it again on Tiger to see if I get the same problem. Thanks - David Here's the full install DEBUG output: $ sudo port -d install openssh +hpn DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net… DEBUG: Changing to port directory: /opt/local/var/macports/sources/ rsync.macports.org/release/ports/net/openssh DEBUG: Requested variant i386 is not provided by port openssh. DEBUG: Requested variant macosx is not provided by port openssh. DEBUG: Executing variant hpn provides hpn DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/dev… DEBUG: Changing to port directory: /opt/local/var/macports/sources/ rsync.macports.org/release/ports/devel/openssl DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant hpn is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/arc… DEBUG: Changing to port directory: /opt/local/var/macports/sources/ rsync.macports.org/release/ports/archivers/zlib DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant hpn is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Executing org.macports.main (openssh) ---> Fetching openssh DEBUG: Executing org.macports.fetch (openssh) ---> Verifying checksum(s) for openssh DEBUG: Executing org.macports.checksum (openssh) ---> Checksumming openssh-4.7p1-hpn12v18.diff.gz DEBUG: Correct (md5) checksum for openssh-4.7p1-hpn12v18.diff.gz DEBUG: Correct (sha1) checksum for openssh-4.7p1-hpn12v18.diff.gz DEBUG: Correct (rmd160) checksum for openssh-4.7p1-hpn12v18.diff.gz ---> Checksumming DVG-5142987_launchd_DISPLAY_for_X11.patch DEBUG: Correct (md5) checksum for DVG-5142987_launchd_DISPLAY_for_X11.patch DEBUG: Correct (sha1) checksum for DVG-5142987_launchd_DISPLAY_for_X11.patch DEBUG: Correct (rmd160) checksum for DVG-5142987_launchd_DISPLAY_for_X11.patch ---> Checksumming openssh-4.7p1.tar.gz DEBUG: Correct (md5) checksum for openssh-4.7p1.tar.gz DEBUG: Correct (sha1) checksum for openssh-4.7p1.tar.gz DEBUG: Correct (rmd160) checksum for openssh-4.7p1.tar.gz ---> Extracting openssh DEBUG: Executing org.macports.extract (openssh) ---> Extracting openssh-4.7p1.tar.gz DEBUG: setting option extract.args to /opt/local/var/macports/ distfiles/openssh/openssh-4.7p1.tar.gz DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_net_openssh/work" && gzip -dc /opt/local/ var/macports/distfiles/openssh/openssh-4.7p1.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing org.macports.patch (openssh) ---> Applying patches to openssh ---> Applying /opt/local/var/macports/distfiles/openssh/openssh-4.7p1- hpn12v18.diff.gz DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_net_openssh/work/openssh-4.7p1" && patch - p1' patching file buffer.c patching file buffer.h patching file channels.c patching file channels.h patching file cipher.c patching file clientloop.c patching file clientloop.h patching file compat.c patching file compat.h patching file HPN12-README patching file kex.c patching file kex.h patching file myproposal.h patching file packet.c patching file packet.h patching file readconf.c patching file readconf.h patching file scp.c patching file servconf.c patching file servconf.h patching file serverloop.c patching file session.c patching file ssh.c patching file sshconnect2.c patching file sshconnect.c patching file sshd.c patching file sshd_config patching file version.h ---> Applying /opt/local/var/macports/distfiles/openssh/ DVG-5142987_launchd_DISPLAY_for_X11.patch DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_net_openssh/work/openssh-4.7p1" && patch - p1' patching file channels.c Hunk #1 succeeded at 3012 (offset 58 lines). Hunk #2 succeeded at 3022 (offset 58 lines). Hunk #3 succeeded at 3030 (offset 58 lines). Hunk #4 succeeded at 3060 (offset 58 lines). ---> Applying /opt/local/var/macports/sources/rsync.macports.org/ release/ports/net/openssh/files/patch-pwdup.diff DEBUG: Environment: DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_net_openssh/work/openssh-4.7p1" && patch - p1' missing header for unified diff at line 8 of patch can't find file to patch at input line 8 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |Index: ssh.c |=================================================================== |RCS file: /cvs/src/usr.bin/ssh/ssh.c,v |retrieving revision 1.305 |diff -u -p -r1.305 ssh.c |--- ssh.c 29 Oct 2007 06:54:50 -0000 1.305 |+++ ssh.c 3 Nov 2007 00:32:14 -0000 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 2 out of 2 hunks ignored missing header for unified diff at line 31 of patch can't find file to patch at input line 31 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |Index: misc.c |=================================================================== |RCS file: /cvs/src/usr.bin/ssh/misc.c,v |retrieving revision 1.65 |diff -u -p -r1.65 misc.c |--- misc.c 23 Nov 2006 01:35:11 -0000 1.65 |+++ misc.c 3 Nov 2007 00:32:14 -0000 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored missing header for unified diff at line 67 of patch can't find file to patch at input line 67 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |Index: misc.h |=================================================================== |RCS file: /cvs/src/usr.bin/ssh/misc.h,v |retrieving revision 1.36 |diff -u -p -r1.36 misc.h |--- misc.h 18 Aug 2006 10:27:16 -0000 1.36 |+++ misc.h 3 Nov 2007 00:32:14 -0000 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored Error: Target org.macports.patch returned: shell command " cd "/opt/ local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_net_openssh/work/openssh-4.7p1" && patch - p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/ net/openssh/files/patch-pwdup.diff'" returned error 1 Command output: -------------------------- |Index: misc.c |=================================================================== |RCS file: /cvs/src/usr.bin/ssh/misc.c,v |retrieving revision 1.65 |diff -u -p -r1.65 misc.c |--- misc.c 23 Nov 2006 01:35:11 -0000 1.65 |+++ misc.c 3 Nov 2007 00:32:14 -0000 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored missing header for unified diff at line 67 of patch can't find file to patch at input line 67 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |Index: misc.h |=================================================================== |RCS file: /cvs/src/usr.bin/ssh/misc.h,v |retrieving revision 1.36 |diff -u -p -r1.36 misc.h |--- misc.h 18 Aug 2006 10:27:16 -0000 1.36 |+++ misc.h 3 Nov 2007 00:32:14 -0000 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored Warning: the following items did not execute (for openssh): org.macports.activate org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. ~

2 4

Please test: yaz 3.0.18
by Joshua Root 31 Dec '07

31 Dec '07

I have a patch ready[1] that updates yaz to the latest version. Unfortunately, I'm not actually using yaz for anything at the moment, so it's difficult for me to test the new version properly. If anyone on the list uses yaz, could you please try out the new version? [1] <https://trac.macosforge.org/projects/macports/ticket/13728> Cheers, Josh

1 0

tone generator?
by paul beard 30 Dec '07

30 Dec '07

Is there, in the ever-increasing galaxy of MacPorts, a tone generator than can be used to tune a wireless network? Briefly, the idea is to play a tone based on the signal strength, with higher pitches for better signal, etc. Not sure how to do this in OS X. http://forum.openwrt.org/viewtopic.php?pid=10283 -- Paul Beard / www.paulbeard.org/ <paulbeard@gmail.com/paulbeard@gmail.com>

1 0

Pidgin with OTR?
by Matrix Mole 29 Dec '07

29 Dec '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've installed both pidgin and the libotr ports, but OTR is not showing up in the list of available plugins for pidgin to use. Is there more than needs to be done besides merely installing the two ports, such as moving an actual file from the libotr install into a directory for pidgin, and if so, which file would need to be moved? Matrix Mole -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHdsD+NtosHRPp48MRAkWSAJ4hApZ/6NVJ3VU1e+IxiH5PRpSrVwCglP9q GdZfDMrcSHR71DbYFkGQqqM= =1oVA -----END PGP SIGNATURE-----

1 0

No module named _md5
by Micheal Cooper 29 Dec '07

29 Dec '07

I found a post on this group about this issue: http://lists.macosforge.org/pipermail/macports-users/2007-March/001927.html but it was not very helpful. I am trying to set up a django dev environment on my macbook pro tiger. I am a newbie switcher, and I have been trying to get this working for over a week now. I wrote up my setup for the system (so far), in the following blogpost: http://shinmaikeru.blogspot.com/2007/12/howto-django-dev-environment-on-mac… The errors I get are as follows: ------ netadminmac:~/Webdev/django/sites/mysite mcooper$ python manage.py runserver Validating models... Unhandled exception in thread started by <function inner_run at 0x11c2970> Traceback (most recent call last): File "/opt/local/lib/python2.5/site-packages/django/core/management/commands/runserver.py", line 47, in inner_run self.validate(display_num_errors=True) File "/opt/local/lib/python2.5/site-packages/django/core/management/base.py", line 112, in validate num_errors = get_validation_errors(s, app) File "/opt/local/lib/python2.5/site-packages/django/core/management/validation.py", line 22, in get_validation_errors from django.db import models, connection File "/opt/local/lib/python2.5/site-packages/django/db/models/__init__.py", line 3, in <module> from django.core import validators File "/opt/local/lib/python2.5/site-packages/django/core/validators.py", line 11, in <module> import urllib2 File "/opt/local/lib/python2.5/urllib2.py", line 88, in <module> import hashlib File "/opt/local/lib/python2.5/hashlib.py", line 133, in <module> md5 = __get_builtin_constructor('md5') File "/opt/local/lib/python2.5/hashlib.py", line 60, in __get_builtin_constructor import _md5 ImportError: No module named _md5 ------ Any help would be appreciated.

2 1

Valgrind port?
by Aleksander Morgado 28 Dec '07

28 Dec '07

Hi all, Is there any major reason not to have a port of Valgrind for Mac OS X? Is it just because no one tried it, or is there any technical issue related to it? I am quite new in Mac OS X, so I don't really know if there is any good alternative. Any idea? Thanks in advance and best regards, Aleks

3 3