May 2007 - macports-users - lists.macosforge.org

Re: First Selfupdate Fails on MacPro
by Nathan Corvino 05 May '07

05 May '07

I installed an old x11 package--I am sure it came off of a PowerPC CD. Seemed to work alright until now. I can't find a x11 package on the Mac Pro CDs--not sure where it is hiding. I downloaded the x11update2006 from Apple, and everything works nicely now. Thanks for the help, Nathan On 5/4/07, Andre Stechert <stechert(a)gmail.com> wrote: > > Here's your problem: > > /usr/bin/ld: warning /usr/X11R6/lib/libX11.dylib cputype (18, architecture > ppc) does not match cputype (7) for specified -arch flag: i386 (file not > loaded) > /usr/bin/ld: Undefined symbols: > _XOpenDisplay > > You've got the PPC version of the X11 libs installed but your on an i386 > (actually x86-64) architecture. > > Did you install the X11 off the wrong OSX install disk by any chance? > > Andre > > p.s. Would be good to reply to the list letting them know what went > wrong... > > > On 5/4/07, Nathan Corvino < corvino(a)gmail.com> wrote: > > > > Sure, np. Thanks for the quick reply! > > > > Nathan > > > > On 5/4/07, Andre Stechert < stechert(a)gmail.com> wrote: > > > > > > My next step would be to look at the config.log, which I'm guessing is > > > in > > > /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate1/base. > > > Do you mind forwarding it? > > > > > > Andre > > > > > > On 5/4/07, Nathan Corvino <corvino(a)gmail.com> wrote: > > > > > > > > Yes, both X11 packages are present in /Library/Receipts. It > > > > certainly does look that way, but I have reinstalled/"upgraded" XCode > > > > several times to no avail--the error message persists. > > > > > > > > Thanks, > > > > > > > > Nathan > > > > > > > > On 5/4/07, Andre Stechert < stechert(a)gmail.com> wrote: > > > > > > > > > > Can you verify that X11User.pkg and X11SDK.pkg are in > > > > > /Library/Receipts? It looks like you > > > > > still don't have X11 properly installed. > > > > > > > > > > > > > > > > > >

1 0

First Selfupdate Fails on MacPro
by Nathan Corvino 04 May '07

04 May '07

I just got a new MacPro, and decided to give MacPorts a try this time around. I would like to get it up and running, but right now it is looking like I will have to go back to Fink. I didn't read the installation instructions initially, so I installed the MacPorts binary before XCode and X11, but I have since removed MacPorts, installed both XCode 2.4.1 and X11, and then reinstalled MacPorts. I get the following log when I try to perform my initial update: ~$ sudo port -d selfupdate > Password: > DEBUG: Rebuilding the MacPorts base system if needed. > Synchronizing from rsync://rsync.darwinports.org/dpupdate/dports > receiving file list ... done > > sent 77 bytes received 236587 bytes 36409.85 bytes/sec > total size is 14488795 speedup is 61.22 > DEBUG: MacPorts base dir: > /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate1/base > DEBUG: Setting user: root > DarwinPorts base version 1.400 installed > DEBUG: Updating using rsync > receiving file list ... done > ./ > deleting config.log > > sent 77 bytes received 6054 bytes 4087.33 bytes/sec > total size is 3162108 speedup is 515.76 > Downloaded MacPorts base version 1.430 > Configuring, Building and Installing new MacPorts base > DEBUG: permissions OK > DEBUG: Setting owner: root group: admin > DEBUG: Install in: /opt/local as root : admin - TCL-PACKAGE in > /Library/Tcl > checking build system type... i686-apple-darwin8.9.2 > checking host system type... i686-apple-darwin8.9.2 > checking target system type... i686-apple-darwin8.9.2 > checking for gcc... gcc > checking for C compiler default output file name... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ISO C89... none needed > checking for a BSD-compatible install... /usr/bin/install -c > checking whether make sets $(MAKE)... yes > checking whether ln -s works... yes > checking for cvs... /usr/bin/cvs > checking for rsync... /usr/bin/rsync > checking for launchd... yes > checking for launchctl... /bin/launchctl > checking for xcodebuild... /usr/bin/xcodebuild > checking for bzip2... /usr/bin/bzip2 > checking for xar... no > checking for tar... /usr/bin/tar > checking for gnutar... /usr/bin/gnutar > checking for which tar variant to use... /usr/bin/gnutar > checking for /usr/bin/gnutar --no-same-owner support... yes > checking how to mark unused variables... > checking for mtree... /usr/sbin/mtree > checking for CoreFoundation framework... yes > checking for SystemConfiguration framework... yes > checking for IOKit framework... yes > checking for CFNotificationCenterGetDarwinNotifyCenter... yes > checking for whether we will build daemondo... yes > checking for dports tree... configure: WARNING: No dports tree found > checking for ports config directory... ${sysconfdir}/ports > checking for sqlite3 location... /usr/lib/sqlite3 > checking for install user... root > checking for install group... admin > checking what permissions to use for installation directories... 0775 > checking how to run the C preprocessor... gcc -E > checking for grep that handles long lines and -e... /usr/bin/grep > checking for egrep... /usr/bin/grep -E > checking for ANSI C header files... yes > checking for dirent.h that defines DIR... yes > checking for library containing opendir... none required > checking for sys/wait.h that is POSIX.1 compatible... yes > checking whether stat file-mode macros are broken... no > checking for sys/types.h... yes > checking for sys/stat.h... yes > checking for stdlib.h... yes > checking for string.h... yes > checking for memory.h... yes > checking for strings.h... yes > checking for inttypes.h... yes > checking for stdint.h... yes > checking for unistd.h... yes > checking limits.h usability... yes > checking limits.h presence... yes > checking for limits.h... yes > checking paths.h usability... yes > checking paths.h presence... yes > checking for paths.h... yes > checking sys/file.h usability... yes > checking sys/file.h presence... yes > checking for sys/file.h... yes > checking crt_externs.h usability... yes > checking crt_externs.h presence... yes > checking for crt_externs.h... yes > checking fcntl.h usability... yes > checking fcntl.h presence... yes > checking for fcntl.h... yes > checking sys/fcntl.h usability... yes > checking sys/fcntl.h presence... yes > checking for sys/fcntl.h... yes > checking sys/cdefs.h usability... yes > checking sys/cdefs.h presence... yes > checking for sys/cdefs.h... yes > checking err.h usability... yes > checking err.h presence... yes > checking for err.h... yes > checking libgen.h usability... yes > checking libgen.h presence... yes > checking for libgen.h... yes > checking sys/socket.h usability... yes > checking sys/socket.h presence... yes > checking for sys/socket.h... yes > checking readline/readline.h usability... yes > checking readline/readline.h presence... yes > checking for readline/readline.h... yes > checking readline/history.h usability... yes > checking readline/history.h presence... yes > checking for readline/history.h... yes > checking pwd.h usability... yes > checking pwd.h presence... yes > checking for pwd.h... yes > checking sys/paths.h usability... yes > checking sys/paths.h presence... yes > checking for sys/paths.h... yes > checking whether closedir returns void... no > checking for pid_t... yes > checking vfork.h usability... no > checking vfork.h presence... no > checking for vfork.h... no > checking for fork... yes > checking for vfork... yes > checking for working fork... yes > checking for working vfork... (cached) yes > checking whether strerror_r is declared... yes > checking for strerror_r... yes > checking whether strerror_r returns char *... no > checking for bzero... yes > checking for memset... yes > checking for dup2... yes > checking for regcomp... yes > checking for strdup... yes > checking for strerror... yes > checking for strtol... yes > checking for fgetln... yes > checking for lockf... yes > checking for flock... yes > checking for setmode... yes > checking for strcasecmp... yes > checking for strncasecmp... yes > checking for strlcpy... yes > checking for copyfile... yes > checking if readlink conforms to POSIX 1003.1a... yes > checking for MD5Update in -lmd... no > checking for MD5_Update in -lcrypto... yes > checking openssl/md5.h usability... yes > checking openssl/md5.h presence... yes > checking for openssl/md5.h... yes > checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include > checking whether -R must be followed by a space... neither works > checking for dnet_ntoa in -ldnet... no > checking for dnet_ntoa in -ldnet_stub... no > checking for gethostbyname... yes > checking for connect... yes > checking for remove... yes > checking for shmat... yes > checking for IceConnectionNumber in -lICE... no > checking for XOpenDisplay in -lX11... no > Unknown configuration problem. Please install the X11 runtime > and/or X11 SDK packages from the Xcode Developer Tools CD > configure: error: Broken X11 install > DEBUG: Error installing new MacPorts base: shell command "cd > /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate1/base > && ./configure --prefix=/opt/local --with-install-user=root > --with-install-group=admin --with-tclpackage=/Library/Tcl && make && make > install" returned error 1 > Command output: checking for strdup... yes > checking for strerror... yes > checking for strtol... yes > checking for fgetln... yes > checking for lockf... yes > checking for flock... yes > checking for setmode... yes > checking for strcasecmp... yes > checking for strncasecmp... yes > checking for strlcpy... yes > checking for copyfile... yes > checking if readlink conforms to POSIX 1003.1a... yes > checking for MD5Update in -lmd... no > checking for MD5_Update in -lcrypto... yes > checking openssl/md5.h usability... yes > checking openssl/md5.h presence... yes > checking for openssl/md5.h... yes > checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include > checking whether -R must be followed by a space... neither works > checking for dnet_ntoa in -ldnet... no > checking for dnet_ntoa in -ldnet_stub... no > checking for gethostbyname... yes > checking for connect... yes > checking for remove... yes > checking for shmat... yes > checking for IceConnectionNumber in -lICE... no > checking for XOpenDisplay in -lX11... no > Unknown configuration problem. Please install the X11 runtime > and/or X11 SDK packages from the Xcode Developer Tools CD > configure: error: Broken X11 install > > while executing > "darwinports::selfupdate [array get global_options]" > Error: /opt/local/bin/port: selfupdate failed: Error installing new > MacPorts base: shell command "cd > /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate1/base > && ./configure --prefix=/opt/local --with-install-user=root > --with-install-group=admin --with-tclpackage=/Library/Tcl && make && make > install" returned error 1 > Command output: checking for strdup... yes > checking for strerror... yes > checking for strtol... yes > checking for fgetln... yes > checking for lockf... yes > checking for flock... yes > checking for setmode... yes > checking for strcasecmp... yes > checking for strncasecmp... yes > checking for strlcpy... yes > checking for copyfile... yes > checking if readlink conforms to POSIX 1003.1a... yes > checking for MD5Update in -lmd... no > checking for MD5_Update in -lcrypto... yes > checking openssl/md5.h usability... yes > checking openssl/md5.h presence... yes > checking for openssl/md5.h... yes > checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include > checking whether -R must be followed by a space... neither works > checking for dnet_ntoa in -ldnet... no > checking for dnet_ntoa in -ldnet_stub... no > checking for gethostbyname... yes > checking for connect... yes > checking for remove... yes > checking for shmat... yes > checking for IceConnectionNumber in -lICE... no > checking for XOpenDisplay in -lX11... no > Unknown configuration problem. Please install the X11 runtime > and/or X11 SDK packages from the Xcode Developer Tools CD > configure: error: Broken X11 install If anyone has any ideas on what to try or how to proceed, I would certainly appreciate it. Thanks, Nathan

3 2

Firefox Launch Problems
by Christopher Riker 04 May '07

04 May '07

I am trying to get firefox installed in a new installation of Gnome under MacPorts 1.4.3 OS 10.4.9 XCode 2.4.1. I have installed firefox-x11 using the command line with the -gnome switch at the end. Sure enough, it appeared in the gnome menu. Launching from gnome, however, resulted in no apparent action. From the X11 terminal, issuing a ./firefox while in the /opt/local/ bin directory seems to start a launch. It returns this error though: /opt/local/lib/firefox-1.5.0.1/run-mozilla.sh: line 424: 20231 Illegal instruction "$prog" ${1+"$@"} Is there a problem with the current firefox-x11 or am I doing something wrong? Thanks! - Chris

1 0

New guy - imapsync port problem/query - p5-net-ssleay
by Erik Likvarn 04 May '07

04 May '07

Hi All, I am new to Darwin Ports. I want to get this working because I need to use imapsync. I am migrating from Exchange server to OS X Server. I have set up a test server and installed Darwin Ports. That all seemed to go fine. Then I attempted to install imapsync using sudo port install imapsync Everything seemed to be going fine until it got to p5-net-ssleay It has been sitting like this all night (about 10 hours now): sudo port install imapsync ---> Fetching p5-net-ssleay ---> Attempting to fetch Net_SSLeay.pm-1.30.tar.gz from http://ftp.ucr.ac.cr/Unix/CPAN/modules/by-module/Net ---> Verifying checksum(s) for p5-net-ssleay ---> Extracting p5-net-ssleay ---> Applying patches to p5-net-ssleay ---> Configuring p5-net-ssleay After my initial attempt, I removed perl5.8 and its dependents and started again. 10 hours seems like an awfully long time. The processor cores in my Mac pro are going at 100% one after other typical of a non-MP aware application. Is this normal, or are we stuck in some kind of a loop here? Any advice accepted gratefully. Cheers, Likkie.

4 9

wxWidgets/libiconv @ loggerheads?
by Nigel King 04 May '07

04 May '07

Hi, Has any further progress been made on this? It is completely blocking my progress with wxWidgets and py-wxpython. Thanks Nigel ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________

3 8

error compiling slirp
by j.hakert 04 May '07

04 May '07

As I try to install slirp the compiler has problems with some system header files: Error: Target com.apple.build returned: shell command " cd "/opt/ local/var/db/dports/build/ _opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dp orts_comms_slirp/work/slirp-1.0.16/src" && make all " returned error 2 Command output: gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/ auth.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/bsd-comp.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/ccp.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/chap.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/fsm.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/ipcp.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/lcp.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/magic.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/md5.c gcc -I. -I. -DUSE_PPP -DUSE_MS_DNS -O2 -O2 -c ./ppp/pppdfncs.c In file included from ./ppp/pppdfncs.c:31: /usr/include/utmp.h:75: error: parse error before 'time_t' /usr/include/utmp.h:78: error: parse error before '}' token make: *** [pppdfncs.o] Error 1 Error: Status 1 encountered during processing. can anybudy help here? Thx jersine

1 0

Re: Continued Gnome-Applets Install Problems
by Andreas Wuest 04 May '07

04 May '07

Hi On 5/3/07, Christopher Riker <criker(a)ns-design.com> wrote: > Andi - > > Thanks for the suggestion. I'm pretty sure I'm missing something > (still new to unix and MacPorts), because: > > From my terminal I executed a: > > sudo xsltproc -o drivemount-sv.omf --stringparam db2omf.basename > drivemount --stringparam db2omf.format 'docbook' --stringparam > db2omf.dtd "-//OASIS//DTD DocBook XML V4.1.2//EN" --stringparam > db2omf.lang sv --stringparam db2omf.omf_dir "/opt/local/share/omf" -- > stringparam db2omf.help_dir "/opt/local/share/gnome/help" -- > stringparam db2omf.omf_in "`pwd`/./drivemount.omf.in" `/opt/local/bin/ > pkg-config --variable db2omf gnome-doc-utils` sv/drivemount.xml Heh, looks like I was not not able to get my point across correctly... ;) What I meant was: if you used e.g. 'sudo port install gnome-applets' or whatever you did, and this failed with the error you've posted previously, simply re-issue 'sudo port install gnome-applets' right after it failed, and see what happens (don't do any clean whatsoever after the failure). Normally, it runs through correctly this time for me. -- Kind regards, Andi

2 1

monotone: Portfile for 0.34.
by Michał Roszka 04 May '07

04 May '07

Hi, This message is mostly informational. Monotone 0.33 build fails on my system. I have tried to build the newer one (0.34). No success either. Finally I have tried to build monotone in a way described in INSTALL (http://monotone.ca/INSTALL) but it failed at the same point. FYI -- I have reported the issue to monotone-devel(a)nongnu.org mailing list. It seems to be an architecture issue as build on Intel based Mac is confirmed as successful (both with port utility and manually). I have a dual-processor G4. But anyway, maybe I would spare anyone some work if I shared a Portfile for 0.34. It is based on the # $Id: Portfile 23092 2007-03-24 21:14:59Z markd(a)macports.org $ one. I hope that some of you will find it useful. I will get back to you with (hopefully) good news when the build issue is solved. So here is the Portfile: PortSystem 1.0 name monotone version 0.34 categories devel maintainers nomaintainer(a)macports.org description A distributed version control system long_description \ monotone is a free distributed version control system. It provides \ a simple, single-file transactional version store, with fully \ disconnected operation and an efficient peer-to-peer synchronization \ protocol. It understands history-sensitive merging, lightweight \ branches, integrated code review and 3rd party testing. homepage http://monotone.ca/ platforms darwin master_sites ${homepage}downloads/${version}/ checksums md5 b7a3cd2d4fcb17287641ee2e33f660fd \ sha1 29fa7e2951b2eaa77673ffaebd00604bab98fd38 \ rmd160 e6c362ac4f270a21fc5745b80edccc99efa362f7 depends_lib lib:XXX:boost configure.env LDFLAGS=-L${prefix}/lib configure.args --infodir=${prefix}/share/info --mandir=${prefix}/ share/man Kind regards, -- Michał Roszka

2 2

Continued Gnome-Applets Install Problems
by Christopher Riker 03 May '07

03 May '07

It seems the Gnome-Applets have been updated. I cleaned out my previous files and attempted to install version 2.18.0. The good news is that the old errors seem to have been cleared. I have, however, encountered a new error. I am installing on a MacBook Pro running OS 10.4.9 and XCODE 2.4.1 for Tiger. I've run a MacPorts Update (1.4.3) and Updated the Port Descriptions. I've been installing via the Aqua version of PortAuthority. The problem seems to be here: Generating and caching the translation database Merging translations into charpick.schemas. sed -e "s|\@LIBEXECDIR\@|/opt/local/libexec|" GNOME_CharpickerApplet.server.in.in > GNOME_CharpickerApplet.server.in LC_ALL=C ../intltool-merge -o -u -c ../po/.intltool-merge-cache ../po GNOME_CharpickerApplet.server.in GNOME_CharpickerApplet.server Found cached translation database Merging translations into GNOME_CharpickerApplet.server. Making all in geyes Making all in themes make[3]: Nothing to be done for `all'. Making all in docs if ! test -d bg/; then mkdir bg/; fi case "." in /*) sd=".";; *) sd="../.";; esac; \ if [ -f "C/geyes.xml" ]; then d="../"; else d="$sd/"; fi; \ (cd bg/ && \ `which xml2po` -e -p \ "${d}bg/bg.po" \ "${d}C/geyes.xml" > geyes.xml.tmp && \ cp geyes.xml.tmp geyes.xml && rm -f geyes.xml.tmp) if ! test -d en_GB/; then mkdir en_GB/; fi case "." in /*) sd=".";; *) sd="../.";; esac; \ if [ -f "C/geyes.xml" ]; then d="../"; else d="$sd/"; fi; \ (cd en_GB/ && \ `which xml2po` -e -p \ "${d}en_GB/en_GB.po" \ "${d}C/geyes.xml" > geyes.xml.tmp && \ cp geyes.xml.tmp geyes.xml && rm -f geyes.xml.tmp) xsltproc -o geyes-C.omf --stringparam db2omf.basename geyes -- stringparam db2omf.format 'docbook' --stringparam db2omf.dtd "-// OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang C -- stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "`pwd`/./geyes.omf.in" `/opt/local/bin/pkg-config -- variable db2omf gnome-doc-utils` C/geyes.xml xsltproc -o geyes-bg.omf --stringparam db2omf.basename geyes -- stringparam db2omf.format 'docbook' --stringparam db2omf.dtd "-// OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang bg -- stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "`pwd`/./geyes.omf.in" `/opt/local/bin/pkg-config -- variable db2omf gnome-doc-utils` bg/geyes.xml xsltproc -o geyes-en_GB.omf --stringparam db2omf.basename geyes -- stringparam db2omf.format 'docbook' --stringparam db2omf.dtd "-// OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang en_GB -- stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "`pwd`/./geyes.omf.in" `/opt/local/bin/pkg-config -- variable db2omf gnome-doc-utils` en_GB/geyes.xml xsltproc -o geyes-es.omf --stringparam db2omf.basename geyes -- stringparam db2omf.format 'docbook' --stringparam db2omf.dtd "-// OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang es -- stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "`pwd`/./geyes.omf.in" `/opt/local/bin/pkg-config -- variable db2omf gnome-doc-utils` es/geyes.xml xsltproc -o geyes-fr.omf --stringparam db2omf.basename geyes -- stringparam db2omf.format 'docbook' --stringparam db2omf.dtd "-// OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang fr -- stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "`pwd`/./geyes.omf.in" `/opt/local/bin/pkg-config -- variable db2omf gnome-doc-utils` fr/geyes.xml xsltproc -o geyes-it.omf --stringparam db2omf.basename geyes -- stringparam db2omf.format 'docbook' --stringparam db2omf.dtd "-// OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang it -- stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "`pwd`/./geyes.omf.in" `/opt/local/bin/pkg-config -- variable db2omf gnome-doc-utils` it/geyes.xml xsltproc -o geyes-ru.omf --stringparam db2omf.basename geyes -- stringparam db2omf.format 'docbook' --stringparam db2omf.dtd "-// OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang ru -- stringparam db2omf.omf_dir "/opt/local/share/omf" --stringparam db2omf.help_dir "/opt/local/share/gnome/help" --stringparam db2omf.omf_in "`pwd`/./geyes.omf.in" `/opt/local/bin/pkg-config -- variable db2omf gnome-doc-utils` ru/geyes.xml http://www.oasis-open.org/docbook/xml/4.1.2/dbpoolx.mod:632: parser warning : PEReference: %notation.class; not found %local.graphics.attrib;" ^ Entity: line 1: parser error : NmToken expected in ATTLIST enumeration %graphics.attrib; ^ Entity: line 4: format () #IMPLIED ^ Entity: line 1: parser error : Content error in the external subset %graphics.attrib; ^ Entity: line 4: format () #IMPLIED ^ Entity: line 1: parser error : Content error in the external subset %graphics.attrib; ^ Entity: line 4: format () #IMPLIED ^ Entity: line 1: parser error : Content error in the external subset %graphics.attrib; ^ Entity: line 4: format () #IMPLIED ^ Entity: line 1: parser error : Content error in the external subset %graphics.attrib; ^ Entity: line 4: format () #IMPLIED ^ unable to parse ru/geyes.xml make[3]: *** [geyes-ru.omf] Error 6 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Warning: the following items did not execute (for gnome-applets): com.apple.activate com.apple.build com.apple.destroot com.apple.install

2 2

py-tables version ?
by David Tremouilles 03 May '07

03 May '07

Hi all ! I'm brand new to macport and more generally to "mac world" so please excuse me if I ask kind of "stupid" questions. It's been two day I'm playing with macport. (What an impressive tool to make your live easier!) I was wondering whether there is a plan to update the py-tables version soon? 1.3 is quite old and 2.0 is arriving soon (currently at rc1 http://www.pytables.org/) Is there a kind of experimental port for 2.0 version? Regards, David PS: Thanks for the macport devs excellent work

2 1