- darwinbuild-dev - lists.macosforge.org

Chroot crashes
by Dmitri Sosnik 17 Sep '09

17 Sep '09

Hi All, I've just tried to build xnu (under 10B504 with 64 bit kernel) and that's what I am getting: $ darwinbuild -init 10B504 ... $ darwinbuild xnu ... *** Installing Headers ... *** Mounting special filesystems ... Mounting devfs ... And here it just stops. Log says: 17/09/09 8:47:51 PM fseventsd[45] could not open <</Volumes/ BuildRoot_10B504_20090917202117/dev/.fseventsd/fseventsd-uuid>> (No such file or directory) 17/09/09 8:47:51 PM fseventsd[45] failed to create the uuid file / Volumes/BuildRoot_10B504_20090917202117/dev/.fseventsd/fseventsd-uuid 17/09/09 8:47:51 PM fseventsd[45] disk logger: failed to open output file /Volumes/BuildRoot_10B504_20090917202117/dev/.fseventsd/ 000000000012caac (Operation not supported). mount point /Volumes/ BuildRoot_10B504_20090917202117/dev/.fseventsd 17/09/09 8:47:51 PM com.apple.ReportCrash.Root[3464] 2009-09-17 20:47:51.123 ReportCrash[3464:2903] Failed to create CSSymbolicatorRef for chroot 17/09/09 8:47:51 PM com.apple.ReportCrash.Root[3464] 2009-09-17 20:47:51.131 ReportCrash[3464:2903] Saved crash report for chroot [3462] version ??? (???) to /Library/Logs/DiagnosticReports/ chroot_2009-09-17-204751_localhost.crash 17/09/09 8:47:51 PM fseventsd[45] disk logger: failed to open output file /Volumes/BuildRoot_10B504_20090917202117/dev/.fseventsd/ 00000000001393dc (No such file or directory). mount point /Volumes/ BuildRoot_10B504_20090917202117/dev/.fseventsd chroot_2009-09-17-204751_localhost.crash: Process: chroot [3462] Path: /usr/sbin/chroot Identifier: chroot Version: ??? (???) Code Type: X86-64 (Native) Parent Process: sh [3411] Date/Time: 2009-09-17 20:47:51.019 +1000 OS Version: Mac OS X 10.6.1 (10B504) Report Version: 6 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000002 Crashed Thread: Unknown Backtrace not available Unknown thread crashed with X86 Thread State (64-bit): rax: 0x0000000000000002 rbx: 0x0000000000000000 rcx: 0x0000000000000000 rdx: 0x0000000000000000 rdi: 0x0000000000000000 rsi: 0x0000000000000000 rbp: 0x0000000000000000 rsp: 0x0000000000000000 r8: 0x0000000000000000 r9: 0x0000000000000000 r10: 0x0000000000000000 r11: 0x0000000000000000 r12: 0x0000000000000000 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000 rip: 0x0000000100000d24 rfl: 0x0000000000010203 cr2: 0x0000000000000002 Binary images description not available Cheers, D

3 3

Darwin 10 (10A432) Status
by William Siegrist 11 Sep '09

11 Sep '09

We have a plist and some roots for 10A432 already, but with a few key projects yet to be released (autozone and xnu) you will have trouble building a lot of projects. Also, our dependency information is incomplete still. I am working on building up the dependency information and will get roots up for autozone and xnu as soon as possible. There are also problems with our installXcode/chroot method and Xcode 3.2. I am working on a better method of handling Xcode builds but do not have an ETA on that. Thanks -Bill

1 1

10A432 Plist and Roots
by William Siegrist 31 Aug '09

31 Aug '09

I have uploaded the first pass at a plist and roots for 10A432. There are still a few missing projects from the source release, like xnu, and so obviously they are also missing roots. There's also a lot of missing dependency information that I'll be working on. You can report any problems in our Trac as usual. Thanks -Bill

1 0

Extension loading issue
by websrvr 24 Aug '09

24 Aug '09

I'm hoping someone can help me with an loading issue. I have 2 extensions and manually loading from the Desktop is fine however adding them to the Extensions directory seems to be an issue because one of the extensions loads too early. The first extensions must load after the AirPortBrcm4311.kext so that it can alter it's behavior to allow the Airport card to act as a dual- band 11n access point and the second must load after the first to allow it to communicate with the pref pane. I can reduce this all to a single extension however during development it's easier to have separation/isolation. Currently the AirPort software only makes a 54G access point and with 80 machines connecting it starts to slow down, increasing it to 11n seems to fix this issue (at least with 80 machines) and since all the MacBook Pro's and other Mac Pro's connecting support the speed it makes sense to up the access-point speed. Does anyone have any example code that shows how to get the extension to load after another kext is loaded? The method used I don't believe is critical as long as it can see that the AirPortBrcm43xx class exists or the extension is loaded? websrvr

2 2

Re: [darwinbuild-dev] Ticket #59
by William Siegrist 20 Aug '09

20 Aug '09

First, clean up the failed build: $ make clean Then force it to only use ppc: $ RC_CFLAGS="-arch ppc" make $ sudo make install -Bill On Aug 20, 2009, at 2:29 PM, Frank J. R. Hanstick wrote: > Hello, > Thank you. > I got the following error after make: > > *** Making all in darwinbuild *** > cc -arch ppc -arch ppc64 -Wall -Werror -o ./manifest -lcrypto > manifest.c > ld64 warning: in /usr/lib/libcrypto.dylib, file is not of required > architecture > Undefined symbols for architecture ppc64: > _EVP_DigestFinal, referenced from: > _calculate_digest in ccrJsGdT.o > _EVP_MD_CTX_init, referenced from: > _calculate_digest in ccrJsGdT.o > _EVP_get_digestbyname, referenced from: > _calculate_digest in ccrJsGdT.o > _EVP_DigestUpdate, referenced from: > _calculate_digest in ccrJsGdT.o > _OpenSSL_add_all_digests, referenced from: > _calculate_digest in ccrJsGdT.o > _EVP_DigestInit, referenced from: > _calculate_digest in ccrJsGdT.o > ld64-62.1 failed: symbol(s) not found for architecture ppc64 > collect2: ld returned 1 exit status > lipo: can't open input file: /var/tmp//ccMtBPpf.out (No such file or > directory) > make[1]: *** [manifest] Error 1 > make: *** [all] Error 1 > > Is there a way to configure for a PPC32 (G4) system? > > On Aug 20, 2009, at 12:37 PM, William Siegrist wrote: > >> On Aug 20, 2009, at 12:28 PM, Frank J. R. Hanstick wrote: >> >>> Hello, >>> I get the error described in this ticket and am suppose to get >>> the varian from /tags/darwinbuild-5. How do I do this? >>> >>> >> >> >> $ svn co http://svn.macosforge.org/repository/darwinbuild/tags/darwinbuild-5/ >> darwinbuild >> $ cd darwinbuild >> $ make && sudo make install >> >> -Bill > > Frank J. R. Hanstick > trog24(a)comcast.net >

2 1

Ticket #59
by Frank J. R. Hanstick 20 Aug '09

20 Aug '09

Hello, I get the error described in this ticket and am suppose to get the varian from /tags/darwinbuild-5. How do I do this? Frank J. R. Hanstick trog24(a)comcast.net

2 1

Darwin 9.8 and Roots
by William Siegrist 10 Aug '09

10 Aug '09

I have added a plist and roots for Darwin 9.8 (9L30). As usual, file bugs if stuff does not build. We working on a new set of BinaryDriver roots as well, but those won't be ready for a while. Thanks -Bill

1 0

Missing Availability.h with 9G55
by Craig Setera 23 May '09

23 May '09

I'm still new to darwinbuild and running into a problem that I don't understand. It appears that I have the problem discussed and resolve in this trac ticket: http://darwinbuild.macosforge.org/trac/ticket/ 58 . I have a build root using 9G55 and can even see the correct CarbonHeaders in the 9G55.plist file: CarbonHeaders = { version = 9G55; }; Unfortunately, references to stdlib.h and stat.h are causing errors referring to Availability.h and I'm not sure what might be going on or how I might be able to fix it: In file included from /SourceCache/ppp/ppp-314.0.1/Helpers/pppd/ccp.c: 60: /usr/include/stdlib.h:61:26: error: Availability.h: No such file or directory In file included from /SourceCache/ppp/ppp-314.0.1/Helpers/pppd/ccp.c: 60: /usr/include/stdlib.h:283: error: syntax error before '__OSX_AVAILABLE_BUT_DEPRECATED' Can anyone provide guidance on how to solve this problem? Thanks, Craig

4 17

great usage of disk space for 9J61
by Chris Gorman 23 May '09

23 May '09

Hello, I have recently been playing with darwinbuild in order to build the opensource components of os x for myself. I started with 9G55 and built the code using the instructions athttp://www.puredarwin.org/developers/darwinbuild . First I downloaded all the roots and then I attempted to build all the projects using 'the brutus way' and this seemed to work for most packages. However when trying this same process out on 9J61, I end up using 71GB of diskspace before running out. Does this seem right? Is there a way of reducing the footprint? By the way http://www.puredarwin.org/developers/darwinbuild has a small typo in the command for X in $(darwinxref version '*' | cut -f 1 -d '-'); do; darwinbuild $X; done Should have a ; removed and read for X in $(darwinxref version '*' | cut -f 1 -d '-'); do darwinbuild $X; done Thanks Chris Gorman

3 2

Darwin 9.7 (9J61)
by William Siegrist 15 May '09

15 May '09

The plist for Darwin 9.7 (9J61) has been added to the server. I am working on compiling roots for the new projects and hope to have them up on the server tomorrow. Thanks -Bill

1 1