July 2008 - macports-tickets - lists.macosforge.org

[MacPorts] #15730: i386-mingw32-binutils 2.16.91-20060119-1 build error
by MacPorts 26 Jan '09

26 Jan '09

#15730: i386-mingw32-binutils 2.16.91-20060119-1 build error -----------------------------------+---------------------------------------- Reporter: vaillant(a)cis.jhu.edu | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: i386-mingw32-binutils | -----------------------------------+---------------------------------------- Build failure on Leopard 10.5.3 {{ ---> Building i386-mingw32-binutils with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/build" && make all " returned error 2 Command output: am__cwd=`pwd` && cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc && \ rm -rf $backupdir && mkdir $backupdir && \ for f in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.info-[0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.info-[0-9][0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.i[0-9] /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ cd "$am__cwd"; \ if /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/missing makeinfo --split-size=5000000 --split-size=5000000 -I /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc \ -o /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.texinfo; \ then \ rc=0; \ cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc; \ else \ rc=$?; \ cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc && \ $restore $backupdir/* `echo ".//opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc WARNING: `makeinfo' is missing on your system. You should only need it if you modified a `.texi' or `.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy `make' (AIX, DU, IRIX). You might want to install the `Texinfo' package or the `GNU make' package. Grab either from any GNU archive site. make[3]: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-mingw32-binutils/work/binutils-2.16.91-20060119-1/bfd/doc/i386-mingw32-bfd.info] Error 1 Making info in po make[3]: Nothing to be done for `info'. make[3]: Nothing to be done for `info-am'. make[2]: *** [info-recursive] Error 1 make[1]: *** [all-bfd] Error 2 make: *** [all] Error 2 Error: Status 1 encountered during processing. }} -- Ticket URL: <http://trac.macports.org/ticket/15730> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 6

[MacPorts] #15714: encfs: configure fails
by MacPorts 25 Jan '09

25 Jan '09

#15714: encfs: configure fails ---------------------------------+------------------------------------------ Reporter: raimue(a)macports.org | Owner: eridius(a)macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: Keywords: encfs | ---------------------------------+------------------------------------------ EncFS fails with a strange error in configure for me. Here is the relevant output from configure: {{{ checking for boostlib >= 1.33... yes configure: WARNING: BOOST_CPPFLAGS -I/opt/local/include checking whether the Boost::Serialization library is available... yes configure: error: Could not link against ! }}} And now the part from config.log: {{{ configure:22433: checking for boostlib >= 1.33 configure:22497: ccache /usr/bin/g++-4.0 -c -pipe -O2 -I/opt/local/include -D__FreeBSD__=10 -I/opt/loc al/include conftest.cpp >&5 configure:22504: $? = 0 configure:22510: result: yes configure:22708: WARNING: BOOST_CPPFLAGS -I/opt/local/include configure:22716: checking whether the Boost::Serialization library is available configure:22754: ccache /usr/bin/g++-4.0 -c -pipe -O2 -I/opt/local/include -D__FreeBSD__=10 -I/opt/local/include conftest.cpp >&5 configure:22761: $? = 0 configure:22783: result: yes configure:23027: error: Could not link against ! }}} So compiling was successful, but it is assuming linking failed for some reason. I'll attach the full config.log for further reference. -- Ticket URL: <http://trac.macports.org/ticket/15714> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #15423: tkdiff Error in startup script: expected integer but got "bold"
by MacPorts 22 Jan '09

22 Jan '09

#15423: tkdiff Error in startup script: expected integer but got "bold" ----------------------------------+----------------------------------------- Reporter: liontooth(a)cogweb.net | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | ----------------------------------+----------------------------------------- Built tkdiff on PPC under 10.4.11. Starts fine; I successfully use it to browse and find two files. When I click "OK", the program aborts with this error: {{{ $ tkdiff Error in startup script: expected integer but got "bold" (processing "-font" option) invoked from within ".client.left.text tag configure inlinetag -background DodgerBlue -font {TkFixedFont bold}" ("eval" body line 1) invoked from within "eval "$widget tag configure $tag $opts($tag)"" (procedure "build-client" line 106) invoked from within "build-client" (procedure "create-display" line 40) invoked from within "create-display" (procedure "main" line 57) invoked from within "main" (file "/opt/local/bin/tkdiff" line 9515) }}} Cheers, Dave -- Ticket URL: <http://trac.macports.org/ticket/15423> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15454: SPIM should require rman
by MacPorts 15 Jan '09

15 Jan '09

#15454: SPIM should require rman -------------------------------+-------------------------------------------- Reporter: jdfrens(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | -------------------------------+-------------------------------------------- When installing spim for the first time, the build failed because it tried (and failed) to find rman. I installed rman explicitly, and then spim installed without any troubles. -- Ticket URL: <http://trac.macports.org/ticket/15454> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15441: BUG: spim segmentation fault
by MacPorts 15 Jan '09

15 Jan '09

#15441: BUG: spim segmentation fault ------------------------------+--------------------------------------------- Reporter: matkam(a)gmail.com | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: spim | ------------------------------+--------------------------------------------- The current version of Spim (7.1) compiles fine, but does not run, exiting with a segmentation fault. xspim just hangs using around 70% cpu. There should be an easy fix to this, as I have found a site hosting a working build with source and a patch: http://inst.eecs.berkeley.edu/~spim/precompiled/MacOSX/ -- Ticket URL: <http://trac.macports.org/ticket/15441> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15520: upgrade processes the same dep multiple times if different depspecs are used
by MacPorts 14 Jan '09

14 Jan '09

#15520: upgrade processes the same dep multiple times if different depspecs are used ------------------------------+--------------------------------------------- Reporter: jmr(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: defect | Status: new Priority: Low | Milestone: MacPorts base bugs Component: ports | Version: 1.7.0 Keywords: | ------------------------------+--------------------------------------------- The depscache is meant to prevent the same port from being upgraded more than once. However, it stores full depspecs, so if one port depends on bin:perl:perl5.8 and another on port:perl5.8, perl5.8 will be upgraded twice. This is usually a non-issue, but it causes extra port rebuilds if -f is used. I suggest a two-part fix: 1. Always skip processing foo if port:foo is in the depscache, and 2. When processing a dep with a depspec other than port:, add a port: entry to the depscache if and only if the port actually ends up being installed. -- Ticket URL: <http://trac.macports.org/ticket/15520> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15392: Guide and install.php should be synced and subversion installs expanded
by MacPorts 14 Jan '09

14 Jan '09

#15392: Guide and install.php should be synced and subversion installs expanded -----------------------------------------+---------------------------------- Reporter: wsiegrist(a)apple.com | Owner: wms(a)macports.org Type: enhancement | Status: new Priority: Low | Milestone: Component: guide | Version: Keywords: guide documentation website | -----------------------------------------+---------------------------------- The installation instructions in the guide should be synced with whats in install.php. Also, the instructions for subversion installs should make it obvious which step in the source install to go to after the checkout (only) step is performed from install.php. The guide does not mention installing from an svn checkout at all. -- Ticket URL: <http://trac.macports.org/ticket/15392> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #15419: octave-forge should be deprecated
by MacPorts 12 Jan '09

12 Jan '09

#15419: octave-forge should be deprecated ------------------------------------+--------------------------------------- Reporter: alakazam(a)melix.net | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: Port Updates Component: ports | Version: 1.6.0 Keywords: octave-forge deprecate | ------------------------------------+--------------------------------------- The {{{octave-forge}}} Portfile should be deprecated now that [http://trac.macports.org/changeset/36910 Changeset 36910] has been landed. I am attaching a proposal for deprecation (that uses {{{pre-fetch}}} to inform users). -- Ticket URL: <http://trac.macports.org/ticket/15419> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #15523: apr: 4-way universal build: duplicate case value
by MacPorts 11 Jan '09

11 Jan '09

#15523: apr: 4-way universal build: duplicate case value -------------------------------------+-------------------------------------- Reporter: ryandesign(a)macports.org | Owner: dluke(a)macports.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | -------------------------------------+-------------------------------------- I'm trying to make a 4-way universal binary of apr. I have MacPorts trunk (@37237), Mac OS X 10.4.11, Xcode 2.4.1, MacBook Pro. I have `universal_archs` set to `ppc i386 ppc64 x86_64` in macports.conf. Here's what apr says: {{{ $ /mp/bin/port install apr build.jobs=1 ---> Fetching apr ---> Verifying checksum(s) for apr ---> Extracting apr ---> Configuring apr ---> Building apr with target all Error: Target org.macports.build returned: shell command " cd "/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12" && nice -n 1 make all " returned error 2 Command output: /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o passwd/apr_getpass.lo -c passwd/apr_getpass.c && touch passwd/apr_getpass.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_cpystrn.lo -c strings/apr_cpystrn.c && touch strings/apr_cpystrn.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_strnatcmp.lo -c strings/apr_strnatcmp.c && touch strings/apr_strnatcmp.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_strings.lo -c strings/apr_strings.c && touch strings/apr_strings.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_strtok.lo -c strings/apr_strtok.c && touch strings/apr_strtok.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_fnmatch.lo -c strings/apr_fnmatch.c && touch strings/apr_fnmatch.lo /bin/sh /mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/libtool --silent --mode=compile /usr/bin/gcc-4.0 -O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386 -arch ppc64 -arch x86_64 -DHAVE_CONFIG_H -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp- precomp -I/mp/include -isysroot /Developer/SDKs/MacOSX10.4u.sdk -I./include -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include/arch/unix -I./include/arch/unix -I/mp/var/macports/build/_Users_rschmidt_macports_dports_devel_apr/work/apr-1.2.12/include -o strings/apr_snprintf.lo -c strings/apr_snprintf.c && touch strings/apr_snprintf.lo strings/apr_snprintf.c: In function 'conv_os_thread_t': strings/apr_snprintf.c:503: error: duplicate case value strings/apr_snprintf.c:501: error: previously used here strings/apr_snprintf.c: In function 'conv_os_thread_t_hex': strings/apr_snprintf.c:674: error: duplicate case value strings/apr_snprintf.c:672: error: previously used here strings/apr_snprintf.c: In function 'conv_os_thread_t': strings/apr_snprintf.c:503: error: duplicate case value strings/apr_snprintf.c:501: error: previously used here strings/apr_snprintf.c: In function 'conv_os_thread_t_hex': strings/apr_snprintf.c:674: error: duplicate case value strings/apr_snprintf.c:672: error: previously used here lipo: can't figure out the architecture type of: /var/tmp//ccxuzKTk.out make[1]: *** [strings/apr_snprintf.lo] Error 1 make: *** [all-recursive] Error 1 Error: Status 1 encountered during processing. $ }}} [https://issues.apache.org/bugzilla/show_bug.cgi?id=43528 APR bug 43528] is for the same error message but it was closed as invalid in October 2007. -- Ticket URL: <http://trac.macports.org/ticket/15523> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #15628: RFE: Enhance port variants
by MacPorts 07 Jan '09

07 Jan '09

#15628: RFE: Enhance port variants ---------------------------------+------------------------------------------ Reporter: raimue(a)macports.org | Owner: macports-tickets(a)lists.macosforge.org Type: enhancement | Status: new Priority: Normal | Milestone: MacPorts base enhancements Component: ports | Version: Keywords: base variants | ---------------------------------+------------------------------------------ Inspired by #15625, port variants should display more information: * Show default variants * Show conflicting variants (`conflicts`) * Show variant dependencies (`requires`) (Not sure if we already had a ticket for this, couldn't find one.) -- Ticket URL: <http://trac.macports.org/ticket/15628> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 8